PROVISION OF SHED FOR SOLID WASTE MANAGEMENT (SWM),ADDN/ALTN AND IMPROVEMENT OF TOILET IN CERTAIN OMQs ,SPL REPAIR TO ROOF OF BLDG NO P-19 AND P-21 AT (AF) CAMP NARAINA, PROVN OF CEMENTED PATH FROM ADM BLOCK TO TECH GATE AT AF STN ISSAPUR, PROVN OF R

Amount

B/R Works Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in soft and loose soil all as specified.

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m depth for foundation, etc, n exc 10 sqm on plan and n exc 1.5m depth and getting out in hard/dense soil.

Removal of excavated earth to a distance exc. 1.50 km but n exc. 5 km and deposited where directed

Returning filling in including spreading levelling, watering and well ramming in layers n.exc 25cm thick in soils.

M&L for PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundation filling mass concrete all as specified and directed.

M&L for brick work with sub class 'B' brick, straight or curved on plan exc 6.0 mtr mean radius built in CM 1:4 etc complete all as specified and directed.

M&L for use and waste form work to sides and soofit of concrete foundation, footings and plinth beams etc. complete all as specified and directed

M&L for use and waste form work to sides and soffit of chajjas etc.complete all as specified and directed by EIC

M&L for use and waste form work to sides and soffit of Column, roof beams and roof etc. complete all as specified and directed by EIC

M&L for RCC 1:2:4 nominal mix concrete type B-1 (using 20 mm graded granite stone aggregate) as in roof beams , lintels and shelves etc all as specified.

M&L for RCC 1:2:4 nominal mix concrete type B-1 (using 20 mm graded granite stone aggregate) as in columns , posts and struts etc all as specified.

M&L for RCC 1:2:4 nominal mix concrete type B-1 (using 20 mm graded granite stone aggregate) as in chajjas etc all as specified.

M&L for RCC 1:2:4 nominal mix concrete type B-1 (using 20 mm graded granite stone aggregate) as in foundation, footings , plinth beams etc all as specified.

S&F TMT bars 10mm dia and over cut to length bent to shape required cranking, bending spirally for hooping for columns hooking ends and bindings with and including mild steel wire (Annealed) not less than 0.9m dia or securing with clips quality confirming to

Ditto all as per item No. 14 described here-in-before but 5mm and over upto and incl 10mm dia for as in stirrups, spacers and binders all as specified and directed.

M&L for cement concrete 1:2:4 type, B1 using 20 mm graded stone aggregates as in copings including necessary use and waste formwork, weathering, slightly rounded or chamfered angles and throating etc complete all as specified and directed

M&L for 15 mm thick rendering in CM 1:6 on fair faces of bricks or concrete surface including finishing the surfaces even and smooth without using extra cement complete all as specified.

M&L for hard core of guage not exceeding 63mm broken stone, deposited spread and levelled in layer not exceeding 15 cm thick watered and rammmed to a true surface.

M&L for 75mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base of plinth protection all as specified.

M&L for 50mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in floors; finishing cement concrete surface even and smooth with using extra cement.

S&F 3mm thick and 38mm wide dividing glass strip, inserted in position.

M&L for 75 mm thick PCC 1:3:6 type C1 (20mm graded stone aggraded) as in plinth protection all as specified.

Forming construction joint 30mm deepx10mm wide filled with sealing compound grade 'A'.

M&L for glazed ceramic coloured/ printed tiles 300mmX200mmX7mm thick on walls as in dado/ skirting etc, joints free set and jointed in neat cement slurry and pointed in white cement and pigment to match the colour of tiles including one boarder tile at the top all around with matching boarder all as specified.

M&L for Non skid coloured glazed ceramic tiles 7mm to 8 mm thick, area of each tile exceeding 0.11 Sqm but n. exc. 0.18 Sqm of each tile in floors etc, joints free set and jointed in cement slurry and pointed in white or coloured cement to match exist colour all as specified.

M&L for ultra designer coloured wall cladding tiles, Size, colour and shape as approved by GE, set and jointed in neat cement slurry and pointed with coloured cement to match etc complete all as specified and as directed

M&L for screed bed or bedding layer of mortar 15mm thick in CM 1:6 for laying floor finishes complete all as specified and as directed.

M&L for 10 mm thick screed bed in CM 1:4 on vertical surfaces to receive tiles all as specified

M&L for cement concrete type B-1 (1:2:4) with using 20mm graded stobe aggrgates) as in surface channels and drains etc. complete all as specified and directed.

M&L for excavating in post holes (or similar holes) each up to 1.50mtr depth as required directed by Engr-in-charge, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layer not exceeding 25 cm, in hard/ dence soil including n.exc 0.5Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25CM, in soft and loose soil complete all as specified

S&F steel work as in tubular, rafters, purlins, posts and similar work (round/sqare/rectangular shape of pipes as approved by Engr-in-charge) trusses of semi circle/ curved shape up to height 6 mtr including post special shaped washers etc complete incl necessary nut bolts wind ties and gusset plates etc using ERW or induction butt welded tubes conformining to IS 1161-1998 garde St-240

M&L for MS work, angle iron, flat iron, MS plates as in brackets, cleats, fastners, wind ties, supports, base for posts etc with riveted, bolted or welded attachment all as specified.

S&F Mild steel Hand Rails, half rounded , Angles, bars, flats drilled and countersunk for balusters running bars for doors, balustes, nosing to steps including embeding in concrete and screwing etc., as in supports for stiffening of fencing, wall ties, hold fasts, clamps and similar small articles confirming to Fe 410-O 0r Fe 310-O

S&F prepainted galvalume aluminum zinc coating GI based corrugated/ semi corrugated steel sheet 0.50mm thick of an colour as in roof covering and ridge fixed with screw all as specified.

Fixing only chain link fencing including line wire mesh any sizes and any type.

Supply only Chain link fencing MS galvanised any size or type

S&F MS framed work such as grills, gratings, etc with ends of bars, shouldered and/ or riveted or forged into spikes framed guard bars, barred iron doors, ladders, framed balusters, walk way, railing and framed work of water tanks and similar work confirming to Fe 290 Gde E-165 complete all as specified and as directed.

S&F mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc, complete, drilled for fixing of steel sheeting or other covering, doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering running rails and guides) and hanging also fastening including holdfast and fixing complete all as specified and as directed.

S&F Anodised aluminium snap grid size 605X605mm frame work for false ceiling all as specified.

S&F 12mm thickness perforated partile board/tiles for insulation and accoustic purposes; 60x60cm in size , fixed in flate sloping ceiling or with stples on snap grid.

S&F factory made 35mm thick 2nd class hardwood plain framed, panneled shutters (two pannels), with lock rail and pannel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rails and stiles as per IS-1003 (Part-1) Kiln seasoned and chemically pressure treated complete all as specified and as directed.

S&F steel windows with side hung shutters including projecting type hinges/box type hinges with steel handle, and steel peg stay, complete including lugs with glazing bars, dovetailed or welded complete all as specified and as directed.

S&F steel windows with side hung shutters including projecting type hinges/box type hinges with steel handle, and steel peg stay, complete including lugs without glazing bars, dovetailed or welded complete all as specified and as directed.

S&F steel ventilator with top hung shutter including hinges, steel peg stay complete.

S&F 4 mm thick sheet glass of ordinary quality and glazing with oil putty or wooden beading to wooden frame or steel frame in squares n exc 0.50 sqm in each pane complete all as specified and directed

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainles steel wire stapel etc complete all as secified and as directed

S&F solid PVC door frame of size 50mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with Ms Squre Tube in opening etc complete all as specified and as directed

S&F factory made pane PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channeld having a PVC sheet strip of 20 mm wide stuck inside with solvent cement for siles and palin colour PVC sheet for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom ral : panelling of plain colour PVC sheet to be fitted in the MS frame wealded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, in the frame a site as per specification and drawing etc complete all as specified and as directed

S&F Aluminium anodised tower bolt 200 mm long of extruded section etc complete all as specified and as directed

S&F aluminium alloy, anodised sliding door bolt 300 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy etc complete all as specified and as directed

S&F 100 mm long butt hinges, heavy weight, stainless steel and fixed etc complete all as specified and as directed

S&F 150 mm long aluminium handle, cast type, anodised etc complete all as specified and as directed

S&F medium grade galvanized steel tubing with all fittings &fixed complete to walls & ceiling or laid in floors 15 mm dia bore pipe (including in short length) complete all as specified and as directed

S&F tubes medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors 20 mm dia bore pipe (including in short length) complete all as specified and as directed

S&F vitreous china wash basin white flat back size 550x400 excluding taps but including 32 mm dia chromium plated waste fitting and PVC waste pipe 610 mm long and MS brackets complete all as specified and as directed

S&F vitreous china squatting pan orissa pattern long pan size 580 mm white with ‘P’ or ‘S’ trap, front or back inlet and foot rests excluding flushing cistern & flush pipe but incl. cement concrete bedding fixed complete all as specified and as directed

S&F PVC valveless double syphonic action type flushing cistern low level of 10 Ltr capacity white with inlet ball valve, float, flushing bend & handle including brackets, suitable for both Indian Type Water Closet & Europeon Type Water Closet including brackets & connection to pipe & fixing of chain & pull or lever if including PVC pipe etc complete all as specified and as directed

S&F bib tap fancy type cast copper alloy chromium plated with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule or fixed for 15 mm dia bore pipe complete all as specified and as directed

S&F 15mm dia bore stop valves/angle valves fancy type chromium plated brass cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions fixed for 15 mm dia bore pipe complete all as specified and as directed

S&F 75 mm bore out let cast iron floor trap with gratings including including jointing to waste pipe fixed in cement concrete tpe B-1 (1:2:4) etc complete all as specified and as directed

S&F 15mm dia bore PVC connection of 45 cm length including brass nuts complete all as specified and as directed Make polyplast

S&F 15mm bore Pillar taps fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed all as specified and as directed

S&F for 75 mm bore Cast iron soil, waste and vent pipes, in any length with or without ears with cement joints, laid in trenches or in floors or fixed to wall vertically complete all as specified and as directed

S&F for 100 mm bore Cast iron soil, waste and vent pipes, in any length with or without ears with cement joints, laid in trenches or in floors or vertically cast, complete all as specified and as directed

S&F 100 mm bore cast iron Bends of (any radius), diminishing piecs or tapers (larger bore measured) complete all as specified and as directed

S&F rotational moulded polyethylence water storage tanks IS : 12701 - 1996 marked (cylindrical vertical with closed top) of 500 Ltrs capacity with and including 20mm dia Ball brass valve high pressure with polythene float and fly nut screwed for iron pipe or brass and fixed etc complete all as specified and as directed.

S&F 20mm bore dia Gun metal , globe or gate valve , with iron wheel head, screwed both ends for iron pipe and fixed.

S&F swivel shower rose with arms 195mm long, bend 45 degree any colour with flange

S&F towel rail 600mm long PTMT fixed with including chromium plated brass screws and wooden /plastic cleats

M&L for extra for forming fair finished drains or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred or stopped etc. complete all as specified and directed.

M&L for reinforced concrete 150mm bore class NP-2 pipes laid & jointed in trenches complete with collar complete all as specified and directed.

M&L for cement concrete bed (1:3:6) type C2 (using 40 mm graded granite stone aggregate) as in concrete bed to drain pipes of 150mm bore , including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

Cutting into manholes for connecting new drains 150mm int dia, making good to pipe and rendering , cutting out existing benching for and forming branch channel (1/2 round and or 3/4 section) in cement concrete 1:2:4 type -1 smooth finished and reforming benching as required.

M&L for preparation of new plastered surfaces of wall and applying two coats of OBD over layers of birla wall putty for smooth the wall surface complete all as specified.

M&L for preparation of new plastered or unplastered surfaces of wall and applying two coats of weather proof exterior emulsion paint over a coat of primer including applying birla putty before applying the weather proof exterior emulsion paint complete all as spd and directed.

M&L for preparing of old painted surfaces of wood & wood based surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

Preparation of new steel surfaces and applying two coats of synthetic enameled paint.over one coat of red oxide primer all as specified

S&F PVC (SWR) gully trap 125/110mm, setting and jointing with solvent cement

Taking down chowkats or frames with shutters (without taking of shutter from frames)not exc. 1.5 sqm each , including cutting for removing the hold fast etc (Distrubed surface of wall shall be make good by the contractor. The rate quoted shall be deemed including for the same) complete all as specified and directed.

Taking down chowkats or frames with shutters(without taking off shutter from frames) exc. 1.5 sqm but in exc 4 sqm each, including cutting holes for rmoving the hold fast etc(Distrubed surface of wall shall be make good by the contractor. The rate quoted shall be deemed including for the same) complete all as specified and as directed.

Taking down cement plaster from brick work or concrete surfaces including ceiling /tile if any & racking out joints haking for keys & scrubing down with water etc. complete all as specified.

Dismantling floor, hearth or wall tiling including cement motor bedding cement mortar bedding(but not backing) removing serviceable tiles to store and rubbish off the premises.

Demolition of plain cement concrete in any floors and paving not exc 15 cm thick above or below ground level including tiles if any all as specified.

M&L for 25mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in sub base of floors complete all as specified and as directed.

M&L for glazed ceramic coloured /printed tiles 450mmx300mmx7mm thick on walls as in dado/skirting etc, joints free set and jointed in neat cement slurry and pointed in white cement and pigment to match the colour of tiles including one boarder tile at the top all round with matching boarder all as spoecified .

M&L for 600x600x10mm vitrified ceramic tiles (square/ rectangular) polished, area of each tiles not exciding 0.36 sqm, in floors/dado/skirting etc set and jointed in neat cement slurry and pointed in white and coloured cement to match all as specified and directyed by Engr-In-Charge .

S&F in repairs for aluminium alloy anodised powder coated window/ventilator frame with glazed /gauged shutter fixed or openable standard section incl standard alumn alloy anodised beads snap type rubber gasket, handle , mlocking arrangement and other necessary fitings complete incl aluminium grill and stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm fixing with glazed clips, jointing cleats fixed completed on wall/floor/RCC member with rawl plug. 5mm thick frosted toughtened glass pane will be fixed all as directed by Engr-In-Charge.

S&F factory made Solid PVC Moulded with wood EPS door shutter, 28 to 30 mm thick (stiles), with 2,4, &6 rised pannel design with 2mm thick Moulded prelam PVC sheet on the front face & 2mm plain colour back side , to frame at site as per specification and drawing etc complete all as specified and directed.

S&F Aluminium flush tower bolt, type 02, anodised and fixed flush length of bolt 125mm complete all as specified and directed.

S&F stainless steel butt hinges, type C- 22, with stainless steel hings pin 75mm and fixed complete all as specified and directed.

S&F 125mm size extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed.

Taking down 15, mm bore steel water tubing and connections including removing from site etc complete all as specified and directed.

Ditto all as per item No. 93 described here-in-before but 20 mm bore

S&F oval type wash hand basin vitreous china 550x400 mm make CERA model or eqivalent with pedestal including waste coupling waste pipe and all necessary fittings complete all as specified.

S&F hole basin mixture with out Pop up waste system with suitable CP connections make ESS ESS model Croma (V-211) or equivalent in jaguar,GEM

S&F reapir CP wall mixture two in one single lever concealed diverter for bath and shower system complete all as specified and directed. Make : Jaguar cat Part No 10075 or equivalent in GEM/MARC/ESS ESS in jaguar,GEM and as approved by GE

S&F towel ring Chrome model T M 02 make ESS ESS or equiavelnt in jaguar,GEM all as specified.

S&F Toilet paper holder model NL 55 make ESS ESS or equivalent in jaguar,GEM.

S&F Acrylic shelf 46x13 cm Make ESS ESS model (TM 07) chrome or equivalent in jaguar,GEM all as specified.

S&F in repair for 15mm bore with flange bib cock, chromium plated brass screwers for iron pipe or brass ferrule make NOVVA(CZAR) cat SY-102 or make ESS ESS cat No Y-103 D or equivalent completed all as specified.

S&F in repairs bib taps chromium plated brass fancy type screwed vdown, screwed for iron pipes or brass ferrule 15 mm bore. Make- Jaguar or equivalent in ESS-ESS,GEM.

S&F in repairs stop valve or angle cock fancy type chromium plated brass screwed down high pressure, screwed both ends for iron pipes or for union 15 mm bore make: jaguar or equivalent in ESS-ESS,GEM.

S&F in repair chromium plated towel rail 600 mm long fixed with brass screws complete.

S&F in repair corner shelf fancy type with CP railing 300mmx300mm complete all as specified.

S&F EWC including flushing cistern and its internal fitting seat cover water jet complete set make: CERA model 2018 cruse P or S type concealed or 2024 cruse P or S type concealed superior or equivalent in Hind ware complete all as specified.

S&F as in repair CP shower in rectangular shape of size 150x150mm of any colour with swivel joint 15 mm bore incl rod fixed to diverter pipe complete all as specified and directed.

S&F CP Brass health facuet with 15mm bore pipe all as specified.

S&F CP Grating 100mm dia all as specified

S&F for CP brass liquid soap container fixed with and incl CP brass screws

M&L for 10mm thick rendering in CM 1:4 on fair faces of bricks or concrete surface including finishing the surfaces even and smooth without using extra cement completed all as specified.

M&L for 5mm thick cement plastering in CM 1:3 on ceiling including finishing the surfaces even and smooth without using extra cement completed all as specified.

S&F 150 mm dia PVC (SWR) pipes single socketed in any length with rubber rings joints fixed to walls complete all as specified

S&F in repair 150 mm dia PVC (SWR) bends with rubber rings joints fixed as required complete all as specified

M&L for prepartion of new or old plastered surfaces of wall and ceiling and applying two coats of OBD over layers of birla wall putty for smooth the wall surface completed all as specified.

M&L for preparation of old painted surfaces of steel surface of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of plastered or unplastered old decorated surfaces of walls/ceiling by brooming down or steel wire brushing scrapping down smoke spot moulds moss and efflorescent salts and treating oily & greasy spots and filling of holes and cracks with suitable material like cement or plaster of pairs etc andf thereafter applying two coat of oil bound distemper complete all as specified and as directed.

Preparation of old external surfaced of walls parapets, fins/facia. Chajjas by wire brushing and washing, rubbing down and stopping of surfaces and levelling/edging the distrubed places/edges using necessary filling compound of cement based putty to obtain smooth regular/even finish surface using sand paper and applying two coats of weather proof exterior emulsion paint over a coat of primer complete all as specified and as directed.

Removing all demolished /taken out material from site up to four storeied building including loading the material in trucks/carts and throughing out from tha AF primises exceeding 2 Km but not exc 5 Km from the site of work

M&L for 100mm thick cement concrete type B-1, 1:2:4 (using 20mm grade aggreage) as in floors/pavings, path etc and finished the Cement Concrete Surfaces Even and Smooth without using Extra Cement, complete all as specified and as directed.

M&L for Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound grade 'A' all as specified and directed.

Demolition of brick work or rubbled stone masonry including all quoins arches , pillars etc built in cement mortar and including removal from the site complete all as specified and as directed

M&L for rendering 15 mm thick in CM 1:4, finished even and smooth without using extra cement complete all as specified and as directed

Dismantling of old water tank exc 250 Ltr & n.exc 500 Ltr capacity and removing from stoe etc complete all as specified and as directed

Demolition of mud phuska from roof including taking down the removed earth from roof down from building complete all a specified and as directed.

M&L for 40mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregate as on roof top flooring including supply and spreading a layer of steel fiber @ 2.00 kg fiber per 10sqm area of flooring before finishing the surfaces and finally finishing the surfaces even and smooth using extera complete all a specified and as directed.

S&F wire netting of galvanised steel wire 0.5mm dia with size of mesh 20mm fixed with tinned tacks or wire staples etc complete all as specified and directed by Engr-in-Charge

M&L for PCC 1:2:4 type B1 using 20 graded agregate as in padding of roof surfaces to maintain the proper slope complete all a specified and as directed.

M&L for APP modified prefabricated five layer 3mm thick and weighing not less than 3.60 Kg per sqm water proofing memberene reinforced with non woven polyster mat without aluminium paint over top surface of water proofing membrane but including torch application.complete all a specified and as directed.

Wire burshing and cleaning the surfaces of concrete including flushing and junction of parapet etc including washing the surfaces after cleaning complete all as specified and as directed.

Taking down eaves gutters and rain water pipes (any size & pattern) including all fittings & removal to stores complete all a specified and as directed.

S&F in repair 100mm bore CI pipe including rings and clamps where required fixed to walls or as spout pipes complete all a specified and as directed.

Ditto all as per item No 134 described here-in-before but 75 mm bore ditto-

S&F in repair 100mm bore CI single branch pieces equal or unequal with oval access doors complete all a specified and as directed.

Ditto all as per item No 136 described here-in-beforebut 75 mm bore ditto-

S&F in repair 100mm bore cast iron plain bends Tapers etc. complete all a specified and as directed.

Ditto all as per item No 138 described here-in-before but 75 mm bore ditto-

S&F 100 mm bore C. I . Floor traps, Nahni traps, P traps complete all a specified and as directed.

Ditto all as per item No 140 described here-in-before but 75 mm bore ditto-

Excavation in Post Holes (or Similar Holes) Each not exc. 0.50 Cum, getting out, Returning, Filling in and Ramming Earth or Broken Rubble mixed with Earth around in layers not exc. 250mm Watering and Removing surplus Spoil to a distance not exc. 50.00 mtr and Making Good Surfaces in Soft/Loose Soil, complete all as specified and as directed.

Supplied and fixed pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with L type or J type or cranked hook bolts along with bituminous washers in lieu of screws etc complete all as specified, directed and as per manufacturer's instructions

M&L for brick work with Sub-Class ‘B’ Bricks (with Old Size Bricks), Straight or Curved on Plan exc. 6.0 METRE mean Radius, built in Cement Mortar 1:6, complete all as specified and as directed.

M&L for applying three coat of white wash on newly plastered surface of walls incl preparation of surface complete all as specified and as directed.

M&L for guniting work to RCC work in column,beam, slab,chajja etc by removing loose concrete. Cover etc. cleaning of surface with wire brush and applying epoxy paint to rusted reinforcement and S&F welded wire Mech fabric or wire not less than 95x95x3mm adhesive, plaster grade for concrete admixture. 1 Part of Ordinary Portland cement 53 grade sand and 2 part of course sand with average thickness 40mm applied with the pressure of 2-2.5 Kg/Sqm by gunniting machine including rendering , 20mm average thick in cement mortar 1:4 on fair faces of gunniting work including making proper geometrical shape and finishing the surfaces even and smooth with out using extra cement and necessary scaffolding complete all as specified and directed. Note: where reinforcement is required will be measured and paid for separately.

S&F vitrefied tiles 600/150mm thick coloured for skirting and dado all as specified and as directed.

Taking down CI Pipe 100/75mm dia all as specified and as directed

Fixing only CI pipe 100/75 mm dia received from Taking down all as directed.

Fixing only GI tubing 15x20mm dia received from T/D.

M&L deformed or twisted bars 10mm dia & over cut ot length bind to shake in reinforcement all as specified and as directed.

E/M Works Supply & fix exhasut fans AC single phase 230/240 V of size 300 mm sweep with louver.

S&F in replacement of modular switch one way 6 Amp one module ISI marked complete all as specified and directed.

S&F in replacement of modular switch one way 16 Amp one module ISI marked complete all as specified and directed.

S&F in replacement of modular socket 6 Amp -2/3 pin combined 2 module ISI marked complete all as specified and directed.

S&F in replacement of modular socket 6/16 Amp -2/3 pin combined 2 module ISI marked complete all as specified and directed.

S&F in replacement of modular white cover plate with frame, two module all as specified and directed.

M&L for point wiring complete with stranded copper conductor 2.5 sq mm single core (nominal area) PVC insulated and unsheathed cable 1100 volts grade drawn in and including medium duty concealed PVC conduit conforming to IS : 9537 (Para-3) and ISI marked not less than 25 mm dia with 1.6 mm thick concealed pressed steel terminal boxes factory made and painted with stove enameled black , top cover 2.8 mm thick plastic laminated sheet of required colour fixed with brass screw and cu washers with all accessories including single core stranded copper conductor connected PVC unsheathed cable in same conduit as earth wire to the common earth and connecting to earth dolly all as secified for one 6 pin socket outlet two in one 16/6 amps on an indeendent board.

Supply and fix switch piano, flush type single pole, one way, 15 Amps, 240 volts, ISI marked all as specified and directed at site.

Supply and fixing socket outlet 3 pin , 3 pin 15 Amps flush type ISI marked all as specified and directed at site.

Supply and fix of factory made epoxy polyster powder coated distribution board TP&N 8 way fabricated from minimum 1.6 mm thick CRCA sheet double door (IP-42 protection) fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with knockouts and suitable for one DP RCBO or DP MCB and RCCB as incomer and 6 SP MCB's as outgoings complete all as specified and confirming to IS: 8623

Supply and fix of factory made epoxy polyster powder coated distribution board SP&N 4 way fabricated from minimum 1.6 mm thick CRCA sheet double door (IP-42 protection) fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with knockouts and suitable for one DP RCBO or DP MCB and RCCB as incomer and 6 SP MCB's as outgoings complete all as specified and confirming to IS: 8623

Supply and fixing of Isolator 4 pole 100 Amps 415 volts 'C' series complete all as specified and as directed at site.

Supply and fixing of Isolator single pole and neutral 40 Amps 230 volts 'C' series complete all as specified and as directed at site.

S&F submain wiring with unsheathed multi-stranded copper conductor cable 1100 volts grade drawn through in and including PVC rigid conduit medium grade of not less than 20mm dia with conduit accessories and concealed in wall/surface of ceiling for two runs of 4 Sqmm single core and one run of 1.5 Sqmm PVC insulated copper conductor for earth continuity wire complete all as specified and as directed. Note :- Two run of single core cable with one run of earth continuity conductor and PVC conduit and accessories will be measured as one length including cutting chasing in wall complete.

M&L for GI pipe light grade 40 mm bore with fitting laid in trenches under road, along pole/ building, protection of cable including necessary MS clamps for supporting of pipe complete all as specified and directed.

Supply, laying and testing in replacement cable XLPE insulated screened, PVC bedded galvanized steel strip or wire armoured electric power cable (heavy duty) with aluminium conductor 1100 Volts grade cross sectional area 4 core x 25 Sq mm. complete all as specified and as directed. Note : Provision of suitable double crimpped lugs and glands deemed to be included in quoted rates.

Excavation in trenches n exc 1.5 wide and n exc 1.5 m in depth for foundation etc or for laying cable etc n exc 10 Sqm on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and as directed.

Removal of excavated material/surplus soil to a distance n exc 50m and depositing where directed at a level n exc 50m above the starting point complete all as specified and as directed.

Supply and filling river sand in trenches including spreading for cushioning of LT UG cable complete all as specified and as dirceted. Note : Punned down thickness shall be measured and paid .

M&L for sub class ‘B’ bricks old size laid flat dry in trenches over cable, across the direction of cable complete all as specified & directed .

M&L for One light point /Fan point controlled by one way switch. wiring with PVC insulated and unsheathed cable 1.5 Sqmm (Nominal area) ISI marked stranded copper conductor single core including medium grade PVC conduit not less than 20mm dia for point wiring, concealed in wall / false ceiling modular metal flush terminal boxes cover plate with frame of required module and colour with all accessories including 1.5 Sqmm PVC insulated and unsheathed stranded copper cable to common earth and connecting to earth dolly including colour coding of cable shall be Phase- Red, Neutral- Black and Earth- Green complete all as specified and directed by for the following.

One light point /fan point controlled by one, one-way switch.

One 5 pin socket outlet 5/6 amps on independent board.

One 5 pin socket oulet 5/6 amps on same board.

Supply and fixing socket outlet 2 in 1, 3 pin 5 Amps ISI marked all as specified and directed at site.

Supply and fix switch piano, flush type single pole, one way, 5 Amps, 240 volts ISI marked all as specified and directed at site.

Supply and fix ceiling roses, 3 phase, PVC/Polycarbonate, isolated body all as specified and directed at site.

Supply & fix fans ceiling complete with electronic type regulator and accessories 230 V,1200 mm sweep. BEE 5 star rated flexible copper cord three core PVC sheathed of size 23/0.0076 of required length from ceiling rose or connector to ceiling fan for giving connection complete all as specified and as directed by Engineer-in-Charge. Havells or Equavalent

M/S Rohit Enterprises

R.K ENGINEERS & CONTRACTORS

BALVIR SINGH AND SONS