Construction of Boundary wall with Gate for Veterinary Dispensary of Grade-3rd at Sukralla Block Billawar Under NABARD

Amount

Earthwork in excavation by mechanical means (Hydraulic excavator) in trenches for foundation, drains, pipes etc. (not exceeding 1.5m in width) and for shafts, wells, cesspits and the like not exceeding 10sqm on Plan, including dressing of sides and ramming of bottoms lift upto 1.5m, including getting out the excavated earth and disposal of surplus excavated earth as directed, including all leads and lift. a) All Kind of soil.= 70%, b) Ordinary Rock=20%, c) Hard Rock(Blasting Prohibited) = 10%.

Earthwork in bulk excavation by mechanical means (Hydraulic excavator) over areas (Exceeding 30cm in depth, 1.5mtr in width as well as 10sqm on plan) including disposal of excavated earth as directed by Engineer-in-charge, including all leads and lift. a) All Kind of soil.= 70%, b) Ordinary Rock=20%, c)Hard Rock(Blasting Prohibited) = 10%.

Providing and laying in position of cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: a) 1:5:10 (1 cement:5 coarse sand:10 graded stone aggregate 40mm nominal size) (including all leads and lifts carriages of material by MT/ HL)

Providing and laying in position of cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: a) 1:3:6 (1 cement:3 coarse sand:6 graded stone aggregate 20mm nominal size) (including all leads and lifts carriages of material by MT/ HL)

Providing and laying damp proof course 50mm thick with cement concrete 1:2:4 (1 cement :2 coarse sand:4 graded stone agg. 20mm nominal size and curing complete (including all leads and lifts carriages of material by MT/ HL)

Brick work with common burnt clay (non modular) bricks of class designation 7.5 in foundation and plinth including curing in cement mortar 1:6 (1 cement:6 coarse sand) (including all leads and lifts carriages of material by MT/ HL)

Extra for brick work with common burnt clay bricks / cement concrete bricks in superstructure above plinth level upto floor five level (including all leads and lifts carriages of material by MT/ HL)

Extra for brick work in square or rectangular pillars (including all leads and lifts carriages of material by MT/ HL)

Half brick masonry with common burnt clay (non modular) bricks of class designation 7.5 in foundation and plinth including curing in cement mortar 1:4 (1 cement:4 coarse sand) (including all leads and lifts carriages of material by MT/ HL)

Extra for half brick masonry in superstructure above plinth level upto floor V level (including all leads and lifts carriages of material by MT/ HL)

15mm cement plaster on the rough side of single or half brick wall of mix. 1:6 (1 cement: 6 fine sand) (including all leads and lifts carriages of material by MT/ HL)

12mm cement plaster of mix. 1:6 (1 cement:6 fine sand) (including all leads and lifts carriages of material by MT/ HL)

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttreses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centring shuttering, finishing and reinforcement. a) 1:1.5:3 (1 cement:1.5 coarse sand:3 graded stone aggregate 20mm nominal size) (including all leads and lifts carriages of material by MT/ HL)

Steel Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. a) Cold twisted bars.

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc. including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. compete. A) Hot finished welded type tubes.

Centring and shuttering including strutting, propping etc.and removal of form work for :

a) Foundations, footings, bases of columns etc. for mass concrete.

b) Columns, Pillars, Piers, Abutments, Posts and struts.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface.

Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg / 10 sqm).

Applying priming coat with ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanized iron / steel works.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.

Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter / 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg / 10 sqm.

Carriage of the following materials by Mechanical Transport from source to site of work incl. loading, unloading and stacking complete :- a) Sand from Billawar crusher for an average lead of 12.00 Km. by M.T. b) Stone aggregate 40mm nominal size & above from Billawar crusher for an average lead of 12.00 Km. by M.T. c) Stone aggregate (Crusher bajree) below 20mm nominal size from Billawar crusher for an average lead of 12.00 Km. by M.T. d) Bricks from Kathua for an av. lead of 85.00 km. by M.T.

DEVINDER SINGH

BINAY KUMAR

SANDEEP KHAJURIA

ATUL PATHAK

PEEYOOSH JEE RAINA