PROVN OF SHED FOR ASSEMBLY AREA OF AIR FORCE SCHOOL AT AF STN PALAM, PROVN OF CERTAIN BR WORKS AT 1 AFSR AT AF STN PALAM, PROVN OF PARKING SHED AT 140 MC/MF DETT AT AF STN PALAM, SPECIAL REPAIR TO ELECTRICAL FITTING / FIXTURES IN CERTAIN SMQs AT DO

Amount

Excavation in trenches n exc 1.5m in depth and 1.5m in width and getting out in soft/loose soil complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm in hard/dense soil complete all as specified and as directed.

Removing excavated material (soil) n .exc 50m and deposited where directed at a level n exc. 1.5m above the strating point complete all as specified and as directed.

M&L for providing cement concrete 1:4:8 type D2 (using 40mm graded stone aggregates) as in foundation, mass concrete and filiings complete all as specified and as directed.

Use and waste of form work to side of concrete in foundation, footing base, base of columns, side and soffits of plinth beam and simillar work for rough finished surfaces of concrete complete all as specified and as directed.

M&L for providing reinforcemed cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregates) as in footing, foundation, beams, plinth beams, base for columns and mass concrete etc complete all as specified and as directed.

Use and waste of form work to side of columns and simillar work for rough finished surfaces of concrete complete all as specified and as directed.

M&L for providing reinforcement cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate) as in columns and pillars etc complete all as specified and as directed.

Use and waste of form work to side of sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, and simillar work for rough finished surfaces of concrete complete all as specified and directed.

M&L for providing reinforcement cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate) as in beams, cantilevers, ressummers, lintels over 1.5m span concrete etc complete all as specified and as directed.

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finished surfaces of concrete complete all as specified and as directed.

Use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide for rough finished surfaces of concrete complete all as specified and as directed.

M&L for providing reinforcement cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregates) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

Use andd waste of formwork to chullah hoods, chajjas, troughs and simlar items including edges for rough finished surfaces of concrete complete all as specified and as directed.

M&L for providing reinforcement cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregates) as in chajjas complete all as specified and as directed.

S&F mild steel TMT bars 10 mm dia and over, cut to length, bent to shape requred, including cranking, bending and binding with mild steel (annealed) wire not less than 0.90mm dia complete all as specified and as directed.

S&F mild steel TMT bars 8 to 10 mm dia a as in stirrups, spacers and binders complete all as specified and as directed.

Material & labour for brick work with sub class 'B' old size burnt bricks straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and as directed.

Material & labour for brick work with sub class 'B' old size burnt bricks straight or curved on plan to any radius in half brick thick walls built in CM (1:4) complete all as specified and as directed.

M&L for 10 mm thick rendering in cement mortar (1:6) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement as on wall complete all as specified and as directed.

M&L for 15 mm thick cement plaster in two layers i.e - 1st layer 10mm thick in CM (1:4) and 2nd layer 5mm thick in CM (1:4) using WPC by weight as per manufacturer's instructions on fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement complete all as specified and as directed. Note:- WPC shall be measured & paid separately under respective item of BOQ.

Suppy only integral water proofing compound complete all as specified and as directed.

M&L for 5 mm thick cement plater in cement mortar (1:3) as on ceiling surface finished even & smooth without using extra cement complete all as spcified and as directed.

M&L for two coats of oil bound distemper over a coat of primer using roller and including necessary scaffolding etc. after preparation of new plastered surfaces complete all as specified and as directed.

M&L for preparing plastered or unplastered new surfaces on ceilings including brooming down or steel wire brushing, scraping down and applying three coats of white wash complete all as specified and as directed.

M&L for complete removal of existing treatment of old plastered surfaces on walls including brooming down or steel wire brushing, scraping down and applying two coats of distemper oil emulsion over one coat of alkalic resistent primer complete all as specified and as directed.

M& L for preparation of new plaster surface of walls ,chajjas, soffits & beam including necessary scaffolding and applying two coats of cement base paint over one coat of chalk whiting primer complete all as specified and as directed.

M& L for complete removal of existing surface of walls, chajjas, soffits & beam including necessary scaffolding and applying two coats of cement base paint over one coat of chalk whiting primer complete all as specified and as directed.

M&L broken stone or boulders hardcore of gauge n.exc. 63mm deposited, spread and levelled in layers n.exc 15cm thick watered and rammed to a true surface for plinth protection/path complete all as specified and as directed.

M&L for 75 mm thick cement concrete (1:4:8) type D2 (using 40mm graded stone aggregate) as in sub base to floors complete all as specified and as directed.

M&L for 25mm thick PCC (1:2:4) type B1 (using 20mm graded stone aggregates) as in sub floor complete all as specified and as directed.

M&L for joint free non skid coloured ceramic tiles, 7 to 8mm thick (squre or rectangular) area of each tile n.exc. 0.11sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces, laid over & including 15mm thick screed bed in cement mortar (1:6) complete all as specified and as directed.

M&L for joint free coloured glazed ceramic tiles in vertical surfaces (300x200)mm x 7mm thick/ (450x300)mm x 7mm thick, set and jointed in cement slurry and pointed in white or coloured cement to match laid over & including 15mm thick cement rendering in cement mortar (1:4) complete all as specified and as directed.

M&L for joint free anti skid coloured ceramic tiles, 7 to 8mm thick (squre or rectangular) area of each tile exceeding 0.18sqm but n.exc. 0.18sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces, laid over & including 15mm thick screed bed in cement mortar (1:6) complete all as specified and as directed.

Description all as per ser item No. 34.00 above but as in skirtings laid over 10mm thick plaster in CM (1:4) complete all as specified and as directed.

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over screed bed or bedding layer of morar 15 mm in cement mortar (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L for providing precast cement concrete (1:2:4) type B1 (using 20mm graded stone aggregates) as in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles and set in CM (1:4) complete all as specified and as directed.

M&L for 75 mm thick cement concrete (1:3:6) type C-2 (using 40 mm graded stone aggregate) as in plinth protection, surface finished even and smooth without using extra cement complete all as specified and as directed.

S&F factory made PVC door frame of size (50mmx47mm) made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification and drawing complete all as specified and as directed.

Supply and fixing for factory made Solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC shets for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail panelling of plain colour PVC shet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement, supplying and fixing in the frame at site as per specification and drawing complete all as specified and as directed.

S&F for butt hinges, stainless steel, ISI Marked 100mm size, complete all as specified and as directed.

S&F extruded aluminium alloy handles, fabricated type anodised of 125mm long complete all as specifed and as directed.

S&F aluminium anodised barrel tower bolts of extruded section and fixed of 100mm long complete all as specifed and as directed.

M&L for 4.0 mm thick frosted sheet glass ordinary quality and glazing with oil putty in square n.exceeding 0.5 Sqm in each panes complete all as specifed and as directed.

S& F powder coated aluminium frame for doors,windows, ventilators, partations with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

S&F powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.), hinges type B-21 100mm long (2 no.) and suitable handle (1 no.) complete all as specified and as directed.

S&F powder coated aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, aluminium handles 2 Nos in each door, aluminium hinges, anodised aluminium snap beading, screws etc. complete all as specified and as directed.

S&F 12 mm thick prelaminated particle board, exterior grade, prelaminated both sides with decorative choice laminations, fixed with screws to aluminium frame work complete all as specified and as directed.

S&F 100 mm long aluminium Mortice lock, 2 levers vertical type complete all as specified and as directed.

S&F aluminum anodised grill DG-102 (10mmx5.2mm) of Decorative grill or equivalent fixed with 'F' Section size not less than (20.60x15.20)mm x1.5mm thick of approved make complete all as specified and as directed. Note:- Minimum thickness of anodizing shall be 15 microns.

S&F PVC connection 15mm size, 600mm long with PTMT nuts both sides complete all as specifed and as directed.

S&F brass CP towel rail 600 mm long fixed with and including chromium plated screws on walls, complete all as specified and as directed.

S&F 500 ltr cap rotational moulded polyethylene water storage tanks three layered (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified in SSR Part I.

S&F ball brass valve high pressure with polythene float and fly nut complete screwed for iron pipe of size 20mm dia complete all as specifed and as directed.

S& F 15mm bore gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

S&F vitreous china, Ist quality, half stall urinal, white, complete including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement, provision of brass chromium plated spreader suitable for 15mm bore pipe, provision of 40mm bore PVC waste pipe, complete all as specified and as directed.

S&F vitreous china squatting pan, 'Orissa' pattern, size (580 X 440)mm white with integral foot rests, including connection to drain or outgoing pipe and to flushing pipe, antisyphonage pipe joint and to socket or stopper, including flush pipe all fittings etc complete all as specified and as directed.

S&F low level flushing cistern 10 ltrs capacity, and connections to pipes and fixing of chain and pull, or lever, if any PVC valveless, syphonic action type, low level, white, with inlet, including brackets complete all as specified and as directed.

S&F in repairs vitreous china ware Wash Hand Basin, white, flat back of size (550 x 400) mm including brackets, cutting for and pinning in ends of brackets or erecting stand including brass CP union/waste fitting of 32mm dia and discharge pipe of 32mm dia PVC of 1.0 m length including one CP pillar tap 15mm bore, cast copper alloy with all fittings etc complete all as specified and as directed.

S&F bib taps fancy type chromium plated, with crunch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed of 15mm bore size complete all as specifed and as directed.

S&F pillar cock fancy type cast copper alloy, chromium plated 15mm dia of bore complete all as specifed and as directed.

S&F stop cock fancy type chromium plated, (concealed type) screwed down, high presure with cruntch or butterfly handle screwed both ends for iron pipe of 15mm bore pipe complete all as specifed and as directed.

M&L for 15mm bore GI tubing 'Medium grade' with all fiting and fixed complete to wall and celing or laid in floor complete all as specifed and as directed.

M&L for 20mm bore GI tubing 'Medium grade' with all fiting and fixed complete to wall and celing or laid in floor complete all as specifed and as directed.

M&L for cast iron Nahani trap/floor trap with CP grating including jointing with cement joint to waste pipe of 75mm dia fixed in cement concrete type B-1(1:2:4) complete all as specifed and as directed.

S&F for Cast Iron `S' Trap 100mm bore complete all as specifed and as directed.

S&F for 100mm bore cast iron waste and vent pipe in any length with or without ears, fixed to walls including suitable iron clamps after every one mtr of interval with cement joints fixed to wall complete all as specified and as directed.

S&F for 75mm bore cast iron waste and vent pipe in any length with or without ears, fixed to walls including suitable iron clamps after every one mtr of interval with cement joints fixed to wall complete all as specified and as directed.

S&F for CI 100mm bends with door complete all as specifed and as directed.

S&F for CI 100mm single branch piece with door complete all as specified and as directed.

S&F for CI 75mm bends with door complete all as specified and as directed.

S&F for cast iron cowls 100 mm size complete all as specified and as directed.

M&L100 mm thick concrete bed to drain pipes in cement concrete (1:4:8) type D-2 (using 40 mm graded stone aggregate) including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm bore pipe complete all as specified and as directed.

M&L for reinforced concrete pipes, class NP2, 150 mm bore, laid and jointed complete with collars complete all as specifed and as directed.

M&L for salt-glazed stoneware gully traps, square mouthed floor trap, size of gully traps (100x 100)mm complete all as specifed and as directed.

S&F vitreous china, Ist quality, half stall urinal, white, complete including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement, provision of brass chromium plated spreader suitable for 15mm bore pipe, provision of 40mm bore PVC waste pipe, complete all as specified and as directed.

Dismantling structural steel work including door, gates but excluding framed truss etc. complete all as specified and as directed.

Demolition of concrete in ground floor and pavings n.exc 15 cm thickness below or above ground level complete all as specified and as directed.

Demolition of brick work built in cement mortar, including all quoins, arches, pillars etc of any description including removing debrish from site complete all as specified and as directed.

Taking down frame with shutters (without taking off shutters from the frame) area exc 1.5sqm and n exc 4.00 sqm each complete all as specified and as directed.

Demolition of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed.

S&F for sheet glass 4mm thick ordinary quality fixing to wooden door/aluminium window shutters in any position with new beads/ steel section as required for securing complete all as specified and as directed.

S&F rolled mild steel grade Fe-290 Gde-E-165 quality-A as in framed work as in doors or gates of angle or other section gates of with gusset plates, rails, cladding, chowkhats/frame or like etc welding hold fast, hinges complete all as specified and as directed.

S&F 1mm thick plain, black, mild steel sheeting, in doors / gates, ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) complete all as specified andd as directed.

S&F for mild steel work (FE 290Grade E-165) roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified andd as directed.

M&L for mild steel works(Fe-290 Grade E-165) as in posts and struts etc in fencing of angle or other sections, including cutting tops to shape as directed, drilling holes, notching for wire etc, complete all as specified andd as directed.

M&L for preparation of new or previously untreated surfaces of steel of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red zinc chrome primer complete all as specified and as directed.

S &F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to fix the wall fixed with self taping scrows complete all as specified andd as directed.

Excavating post holes or similar holes, each not exceeding 0.5 Cu. M, getting out in soft/ loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm thick, watering and removing surplus soil to a distance n.exc 50m & making good surface complete all as specified andd as directed.

M & L for PCC (1:2:4) type B-1(using 20mm graded crushed stone aggregates) as in anchorage blocks for hold fast, post and struts complete all as specified andd as directed.

M&L for pre-polished chequered cement concrete tiles of size (30x30) cm x 25 mm thick, set and jointed with grey cement and pointed with grey cement and pigment as in floors with and including 20 mm thick screed bed with CM (1:4) complete all as specified andd as directed.

M&L for PCC (1:3:6) type C-2 (using 20 mm graded stone aggregates) as in surface channel, drain and manholes complete all as specified and as directed.

M&L for PCC (1:2:4) type B-1 (using 20mm graded stone aggregates) as in benching, coping including necessary use andd waste of form work complete all as specified and as directed.

Providing & Fixing false ceiling at all heights with semi perforated 12mm thick micro tegular edged GRG (Glass Fibre Reinforced Gypsum false ceiling tiles of size 595x595 mm of approved texture, design and patterns having moisture content less than 2% , humidity resistance of 99%, NRCO.50 TO 0.75 AS PER is 8225:1987, nONCOMBUSTIBLE AS PER bs 476 (PART 4) -1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33 mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15x32 mm of length 3000mm, cross-T of size 15x32 mm of length 1200 mm and secondary intermediate cross -T of size 15x32 mm of length 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e. 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L-shape level adjuster of size 85x25x2 mm, Galvanised iron perimeter wall angle of size 24x24x0.40mm of length 3000mm to be fixed on periphery wall/partition with the help of plastic rawl plugs at 450mm center to center and 40mm long dry wall wood screws complete all as specified and as directed.

S&F mild steel rolled section as in main and cross beams, hip and jack rafter, purlins where connected to common rafters and running rails and guides, fixed with angle cleats or other connecting plates etc confirming to Fe-410W (Gde E-250) Quality-A grade complete all as specified and as directed.

S&F mild steel work in tubular trusses/posts including special shaped washer etc, complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St -240 complete all as specifide and as direted.

S&F plates (plain or chequered) channels, square cut or notched (ordinari and counter sunk) forming holes, without any attachment of FE 410-W (Gde-E-250) quality B complete all as specified and as directed.

M&L for 100 mm thick cement concrete (1:4:8) type D2 (using 40mm graded stone aggregate) as in sub base to floors complete all as specified and as directed.

M&L for sand filling under floors or in foundations including consolidation complete all as specified and as directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment, conforming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and as directed.

M&L for 15 mm thick rendering in cement mortar (1:4) on fair faces of brick work or concrete surfaces of wall including finishing surfaces even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of white wash on undecorated surface including necessary scaffolding etc complete all as specified and as directed.

M&L for PCC (1:3:6) type C-2 (using 40 mm graded stone aggregates) as in foundation filling and mass concrete for fixing posts complete all as specified and as directed.

S &F pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to fix the wall fixed with self taping scrows complete all as specified andd as directed.

Taking down carefully unserviceable copper/aluminium point wiring (light, fan, socket or power) complete including fixture and fitting such as switches, ceiling rose, lamp holder, regulators, sockets, light fittings, wooden terminal boxes, plastic laminated sheet cover, including taking down of DB’s, meter board any type complete all as specified and as directed.

Taking down unservesiable sub main wiring with conduits/battens etc complete all as specified and as directed.

M & L for Point wiring with single core PVC insulated but unsheathed 1.5 Sqmm FRLS multistranded copper conductor cable 1100 volts grade IS-694 marked drawn in and including rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked with all conduit fittings and fixing accessories including pressed steeI boxes with bakelite sheet for mounting switches, sockets, fan regulators, etc and earth wire single core PVC insulated but unsheathed multistrand copper conductor cable 1100 volts grade IS-694 marked 1.5 Sqmm FRLS cable as continuous earth wire connecting to common earth dolly complete all as specified and as directed. (a) One light point controlled by one switch one way

(b) One fan/exhaust fan point controlled by one switch.

(c) One socket outlet 5 Amp controlled by one switch on independent board

(d) One 3 pin 5 Amps socket out let point on the same board controlled by one switch complete

(e) One bell point controled by one bell push 5 Amps

All as per Srl item No 108.00 here-in-before but for one power point 6 pin 15 Amps socket out let with 2.5 Sqmm stranded copper conductor cable PVC insulated including earth wire 2.5 Sq mm copper conductor cable connected to earth dolly complete all as specified and as directed.

Supply and fixing of ceiling rose, surface type, 65mm x 50mm, 3 terminal complete all as specified and as directed.

Supply and fixing of electric ding dong bell, 230 volt AC, single pole, complete all as specified and as directed.

Supply and fixing of lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed.

Supply and fixing of stepped fan regulator 300 watt, 230 volts, 50 HZ, AC complete all as specified and as directed.

Supply and fixing of switch piano flush type 5 Amps, single pole one way complete all as specified and as directed.

Supply and fixing of socket out let 3 pin 5 Amps, flush type complete all as specified and as directed.

S&F of switch piano flush type single pole one way15 Amps complete all as specified and as directed.

Supply and fixing of socket outlet 2 in 1, 6 pin 5/15 Amps, flush type complete all as specified and as directed.

Supply and fixing of flush type bell push, 5 Amps complete all as specified and as directed.

S&F of indoor decorative LED battens integrated type 20 watt 4 feet white fixture with extruded aluminium body, suitable for LED tube 20 watt, bipin holder, connector block, LED rod 20 watt etc complete with all accessories internally pre wired and including connecting up with twin core copper conductor cable complete all as specified and as directed.

Supply and fixing of LED bulb 7 watt fixed in pendent holder /bulk head complete all as specified and as directed.

Supply and fixing of sheet metal enclosure for distribution board SPN (when MCBs to be used ) 8 way double door, 200 Amps rated bus bars and with neutral, earthing bar and din rail complete all as specified and as directed.

Supply and fixing of sheet metal enclosure for distribution board SPN (when MCBs to be used ) 12 way double door, 200 Amps rated bus bars and with neutral, earthing bar and din rail complete all as specified and as directed.

Supply and fixing of vertical type load line distribution board,double door, 4 way AC 3 Phase, 415 V, TPN bus bar 200 Amps rating and earth bar and din rail suitable for accomodation of MCCB 100/125 amp,16kA 4 pole incomer complete all as specified and as directed.

Supply and fixing for MCCB, 4 Pole 125A,16kA complete all as specified and as directed.

Supply and fixing of MCB, SPN, 40A ,10kA complete all as specified and as directed.

Supply and fixing of MCB, SP, 6-32A ,10kA complete all as specified and as directed.

Supply and fixing of singIe poIe and neutraI encIosure 240 VoIts with two pin and earth pIug and socket compIete with one singIe poIe MCB of 10 Amps rating compIete aII as specified and as directed.

M&L for sub main wiring with two single core 6.0 sqmm PVC insulated FRLS multistranded copper conductor cable drawing into and including rigid non metallic PVC conduit, medium grade ISI marked with all conduit fittings & fixing accessories and one single core 6.0 sqmm multistranded copper conductor cable as continous earth wire complete all as spd and directed. Note:- Two core cable of main wire, one single core of earth wire and PVC conduit shall be measured and paid as one run.

M&L for earthing complete for bldg with galvanized mild steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 meters below ground level) with top edge of earth plate not less than 1.5 meters below ground level connected to galvanized earth wire 4.00 mm dia by means of nuts, bolts, thimbles, check nuts, washers of GI or steel, PCC (concrete chamber of size 300 mm x 300 mm x 300 mm inside dimension) shall be PCC (1:3:6) type C-1 (using 20mm graded crushed stone aggregate) with fair finish, internal surface of concrete chamber shall be given 15mm thick plaster in CM (1:4), funnel with wire gauge of 22 gauge, 8 mesh per liner inch, 80 mm thick PCC pit cover 320 mm x 320 mm of RCC (1:2:4) type B-1 (using 20 mm graded crushed stone aggregate) reinforced with XPM, JALLI and charcoal dust and common salt all as shown in electrical plate No 3 of MES SSR Part-I (2020) and specified including provision of earth wire protected by 15mm dia medium grade GI pipe and watering GI pipe shall be 20mm bore medium grade etc complete, all excavation and earth work & connecting the earthing to an earthing test point main switch board as specified and testing on completion complete all as specified & directed by Engr-in-Charge.

S&F LED bldg light highy efficient high power LED bldg light fittings 45 Watt with powder coated pressure die cast Aluminium with heat resistance toughened glass lens with internally prewired including electronic driver and connecting up with three core flexible Copper conductor 1.5 sqmm cable complete all as specified and as direted.

S&F GI pipe light grade 40 mm dia bracket to make L type for bldg light fitting complete all as specified and as directed.

S&F MS flat clamp of size 30mmx5mm thick including nuts, bolts and washer suitable for bldg light fitting complete all as specified and as directed.

S&F of indoor decorative LED battens integrated type 10 watt 2 feet white fixture with extruded aluminium body, suitable for LED tube 10 watt, bipin holder, connector block, LED rod 10 watt etc complete with all accessories internally pre wired and including connecting up with twin core copper conductor cable complete all as specified and directed.

S&F in repair LED recessed mounting square slim LED down lighter 36 Watt for AS/GB/POP ceiling 2' x 2' size complete with driver internally prewired and connecting up with twin core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F post top lantern LED type 20 watt 230 volt AC outdoor type with ddecorative post top for 360 degree inddirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete all as specified and as directed.

M&L for sub main wiring with two single core 2.5 sqmm PVC insulated FRLS multistranded copper conductor cable drawing into and including rigid non metallic PVC conduit, medium grade ISI marked with all conduit fittings & fixing accessories and one single core 2.5 sqmm multistranded copper conductor cable as continous earth wire complete all as spd and directed. Note:- Two core cable of main wire, one single core of earth wire and PVC conduit shall be measured and paid as one run.

HANUMAN BUILDERS (BID ID -3084713)

RK TRADERS (BID ID -3084786)

High Tech Metal India (BID ID -3084876)

Shiv Shankar Nirman Co. (BID ID -3081471)

M.B ENTERPRISES (BID ID -3086048)

JAIPAL AND BROTHERS (BID ID -3087307)

M/S Rohit Enterprises (BID ID -3085989)