Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹42.2 LAccepted-AOC OPP MARUTI SERVICE CENTRE SARACHARMA POST SRI VIJAYA PURAM 744 105 | SRI VIJAYA PURAM | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744105 | L1 | Accepted-AOC L1 | |
| 2 | L2₹44.7 L+₹2.1 L (5.03%)Rejected-Finance | L2 | Rejected-Finance Not being L1 | |
| 3 | L3₹44.8 L+₹2.2 L (5.13%)Rejected-Finance | L3 | Rejected-Finance Not being L1 | |
| 4 | L4₹46.9 L+₹4.2 L (9.97%)Rejected-Finance | L4 | Rejected-Finance Not being L1 | |
| 5 | L5₹47.1 L+₹4.5 L (10.6%)Rejected-Finance 2ND CROSS DEEN STREET M G ROAD JUNGLIGHAT POST SRI VIJAYA PURAM 744 103 | SRI VIJAYA PURAM | SOUTH ANDAMAN | ANDAMAN AND NICOBAR ISLANDS | 744103 | L5 | Rejected-Finance Not being L1 |
Tender Value
₹43.5 L
EMD Value
₹87,000
Closing Date
25 Nov 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer Haddo, Port Blair
GARRISON ENGINEER HADDO Military Engineer Services Haddo Post Port Blair Andaman and Nicobar 744102
ADDITION / ALTERATION TO TOILETS IN NAVCC BLDG AT NSRY AND ADDN / ALTN OF QRT BAY NEAR NSRYJETTY AREA UNDER GE HADDO, PORT BLAIR
2023_MES_627092_1
8789/GE/H/PB
Open Tender
Civil Works
Item Rate
180 days
GE Haddo Port Blair
Class D and Category a(i)
9 documents required · 9 mandatory
₹500
GE Haddo
₹87,000
Yes
6 Feb 2024
6 Nov 2023
2 Dec 2023
6 Nov 2023
25 Nov 2023
20 Nov 2023
7 Nov 2023 - 16 Nov 2023
Amount
Dismantling floor, hearth or wall tiling including cement mortar bedding and rubbish off the premises complete all as specified and as directed.
Demolition of cement concrete (Unreinforced) in ground floors and pavings n exc 15cm thickness (Below or above Ground level) complete all as specified and directed.
Demolition of Reinforced manhole, Drain over cover slabs in similar works etc complete all as specified and directed.
Demolition of Precast cement concrete block walling built in CM or Cement lime Mortar complete all as specified and as directed.
Dismantling of wrought iron or mild steel work and structural steel work of any description or otherwise provided for complete all specified and directed.
Material and labour for Pre-cast cement concrete block masonry with solid blocks in1:3:6 type C1 using 20mm graded aggregate, exc. 10 cm in width and setting in mortar in CM 1:6 complete in walls all as specified and directed.
Excavation post holes or similar works, each n.exc. 0.5Cum, getting out in hard/dense soil. Returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n. exc. 25cm and watering and removing surplus soil to a distance not exceeding 50m and making good surfaces all as specified and directed.
Material and labour for plain Cement concrete 1:4:8 type D2 using 40 mm graded stone aggt as in foundation, fillings & mass concrete all as specified and directed.
Material and labour for plain Cement concrete 1:3:6 type C2 using 40 mm graded stone aggt as in foundation, fillings & mass concrete all as specified and directed.
S&F for Rolled mild steel joist, channel, angle or tee sections, fixed independently, without connecting plates, etc (cut to ordinary length i.e, with in 20mm of the length indicated conforming to Fe 410-W-(Gde-E-250) Quality-A complete all as specified and directed.
S&F for mild steel rolled sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates etc., conforming to Fe-410-W (Gde E-250) Quality 'A' complete all as specified and as directed.
S&F for Rolled mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe-410-W (Gde E-250) Quality -A complete all as specified and as directed
S&F multi wall poly carbonate sheet 4mm thick with required side lap fixed in position on steel frames up to 10m in height with required screws etc. in wall cladding at roof level complete all as specified and as directed
S&F for pre painted Galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, ridge etc fixed with self tapping screws complete all as specified and directed.
S&F for mild steel holdfast, bands, straps, bracket/ clamp for eves gutter, valley gutter and similar conforming to Fe-290 Gde-E-165 complete all as specified and as directed.
M&L for preparation of new steel surfaces over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed
M&L for Cement concrete PCC (1:4:8) TypeD2 (using 40 mm graded aggregate) as in sub base 100 mm thick complete all as specified
S&F for glossy finished chequered cement concrete tiles 30cmx30cmx25mm thick set jointed with grey cement and pigment and pointed in neat cement slurry including 15 mm thick screed bed of CM(1:6) in floors complete all as specified and directed.
Material and labour for precast cement concrete (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in manhole cover slab and set in CM 1:4 all as specified and directed.
M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed
S&F framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tank and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.
M&L for PCC (1:2:4) type B1 (20mm graded aggregate) as in surface channel, drain and benching of manhole with even and smooth finishing without using extra cement complete all as specified and directed.
M&L for 10mm thick plaster in CM (1:6) on fair faces of concrete/PCC block surfaces of walls finished even and smooth (without using extra cement) complete all as specified and directed.
M&L for preparation of newly plastered wall surfaces and applying two coats of cement based paint over one coat of primer etc complete all as specified and directed.
M&L for MS rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates etc Fe 410-W Grade E-250 Quality A complete all as specified and directed.
M&L for 6mm thick X 150mm wide non-asbestos decorative planks (shera planks) fixed to steel members with suitable screws/fasteners/nuts and bolts & washers and applying two coats syenthetic enamel paints complete all as specified and directed. Make:- Shera Planks or Equivalent as approved.
Dismantling stone slabs and tiles of any description or thickness in floors, aprons, risers of steps, skirting, dado etc., laid bedded and pointed in any mortar complete all as specified and as directed.
Material and labour for non skid ceramic coloured tiles 7 to 8 mm thick(Square/Rectangular) area of each tiles exc 0.06 Sqm but n. exc 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match including 15mm thick screed bed of CM (1:4) bedding all as specified and directed
M & L PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) 25mm thick as in levelling course, sub-floors and paving etc complete all as specified.
M&L for glazed ceramic designed coloured tiles as in vertical surfaces of size 300x450x7 mm thick set and jointed in neat cement slurry and pointed in coloured cement to match designed incl 10 mm thick backing coat in CM (1:3) complete all as specified.
M&L for 18 to 20mm thick granite stone (of any type), work (table rubbed and polished), as in counter wash basin, cooking platform, window cills / jambs steps, pillers, etc in cement mortar (1:4) incl pointing in white cement (1:2) using marble dust with admixture of cement and pigment to match the shade of granite incl 15mm thick CM (1:4) bedding & pointed in white/coloured cement to match coloured tiles including grinding and rounding (chamfering)to exposed edge of granite slab with mirror polishing complete all as specified and directed. NOTE : Colour of granite shall be as approved by Engineer-in-Charge.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames), area not exceeding 1.5 Sqm each complete all as specified and as directed.
Taking down Aluminium Windows and Ventilator chowkhats or frames with shutters without taking off shutters from frame n. exe 1.5 Sqm each complete all as specified and directed.
S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube as per specification & drawing, fixed in opening complete all as specified and as directed.
S & F for Factory made solid PVC molded with particle board core door shutter 28 to 30 mm thick with 2, 4 or 6 raised panel design with 2mm thick molded PVC sheet on the front face and 2mm plain colour PVC sheet on back face, supplying and fixing in frame at site as per specification and drawing all as specified
M&L for HDF boards (fire & water proof) of 19mm thick as in CB, cabinet, shelves etc & the like with and including 02 coats of synthetic enamel spray painting glossy finish over a coat of primer incl preparation of surface complete all as specified and as directed.
S&F auto hinges stainless steel grade AISI-316 (type Austenitic anticorrosive in nature) suitable for kitchen cabinets,CB , Shelves etc complete all as specified and directed.
S & F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised, width of flaps 40mm (when open) complete all as specified and as directed.
S&F 100mm size butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised, type B-21, fixed n repairs complete all as specified and as directed.
S&F 100mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.
S&F 75mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed.
S&F extruded aluminium anodised 75mm long hasp and staple, safety type incl bolt to hinge plate and fixed with screws complete all as specified and directed
S&F sliding door bolt, 300mm long, aluminium alloy, anodised, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy, complete all as specified and as directed.
S&F for providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for Door and shutters of sliding doors, windows & ventilators including providing and fixing hinges/pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/ paneling, C.P brass/stainless steel screws all complete all as per architectural drawings and the direction of Engr-in-Charge.
Supply only 4.0 mm thick figured glass, pin head type and glazing with aluminium glazing clips in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.
Dismantling of 110mm dia cast iron/PVC pipes incl bends/branch pieces jointed in cement mortar and taking out if reqd.Complete all as specified and as directed.
S&F for 110mm dia PVC (SWR) single socketed pipes in any length complete with rubber ring joints fixed to wall etc using synthetic rubber adhesive cement solvent complete all as specified.
S&F for 110mm dia PVC (SWR) bends any radius complete all as specified.
S&F for 110mm dia PVC (SWR) bends with acess door any radius complete all as specified.
S&F for 110mm dia PVC (SWR) branch piece single (Single Y) equal or unequal complete all as specified.
S&F for 110mm dia PVC (SWR) vent cowl complete all as specified.
Dismantling of 75 mm dia cast iron/PVC pipes incl bends/branch pieces jointed in cement mortar and taking out if reqd. complete all as specified.
S&F for 75mm dia PVC (SWR) single socketed pipes in any length complete with rubber ring joints fixed to wall etc using synthetic rubber adhesive cement solvent complete all as specified.
S&F for 75 mm dia PVC (SWR) bends of any radius complete all as specified.
S&F for 75 mm dia PVC (SWR) bends with acess door of any radius complete all as specified.
S&F PVC (SWR) branch piece, single (Single Y) of radius equal or unequal, 75mm dia complete all as specified.
S&F PVC (SWR) vent cowl, 75mm dia complete all as specified.
M&L in repairs PVC (SWR) multi floor trap 75mm with grating including jointing with solvent cement complete all as specified.
S&F vitreous china wash down single piece WC of size 840x390x720 incl flush tank, softclose seat cover with 'S' or 'P' trap and other connecting items approved brand including fix with white cement complete all as specified. Make: Jaquar Cat Part No. VGS-WHT-0207BS and ZPS-WHT-1015UF) or equivalent in Parryware/Cera/Kajaria/Prayag
M&L for vitreous China bowl urinal flat back, of size 465x355x265 mm white (minimum) with grating and union for discharge pipe including providing and fixing plugs, buttiing urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in white cement with and including 32mm dia waste pipe in low density polyethylene (LDPE) of pressure rating 6 kgf/sqcm of 1.0 metre length, PVC connections 15mm size with PTMT nuts of length 450mm, concussive push button taps 15mm dia or bore, cast copper alloy, screwed for iron pipe, urinal spreader of PTMT any colour for fixing with 15 mm dia pipe (minimum weight 60gms), fixed in repairs complete all as specified and as directed.
S&F for vitreous China wash hand basin, white, flat back, size 550mm x 400mm including 15mm dia pillar cock, CI bracket 15mm dia polythene connection, 32mm dia waste coupling and 32mm dia PVC waste pipe 90cm long etc.complete all as specified and as directed.
S&F 15mm bore pillar taps, Cast copper alloy, chromium plated, fancy type screwed down, high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts complete all as specified and as directed. MAKE: PRAYAG Cat part No. PIS-14H or equivalent as approved.
S&F bib taps long body with flange cast copper alloy chromium plated fancy type with crutch or butter fly handle screwed down for Iron pipe or for brass fancy for CP brass fancy type 15mm dia. Make :Prayag Cat No. PIS-08H or equivalent as approved.
S&F in repairs angular stop cock, 15mm dia, cast copper alloy, chromium plated, fancy type, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed. MAKE: PRAYAG Cat part No. PIS-10H or equivalent as approved.
S&F in repairs stop cock, 15mm dia, cast copper alloy, chromium plated regular body(male thread), fancy type, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed. MAKE: PRAYAG Cat part No. PIS-26 or equivalent as approved.
S&F in repairs two way bib cock, 15mm dia, cast copper alloy, chromium plated, fancy type, with crutch or butterfly handle, with long shank and cup screwed both ends for iron pipe or for unions, complete all as specified and as directed.. MAKE: PRAYAG Cat part No. PIS-12H or equivalent in PARRYWARE/ JAQUAR/ JOHNSON
S&F tubular towel rail, brass, chromium plated, 20mm dia, D type, 60cm long between flanges, fixed in repairs complete all as specified and as directed. MAKE: PRAYAG Cat part No. BA-70 or equivalent as approved.
S&F towel ring , brass, chromium plated with round flange, fixed in repairs complete all as specified and as directed. MAKE: PRAYAG Cat part No. BA-11 or equivalent as approved.
S&F in repairs PVC connections 15mm size with PTMT nuts of length 600mm, complete all as specified and as directed.
Supply and fix for providing chromium plated overhead shower rose or shower arm with or without swivel joints fixed to 15 mm bore of pipe complete all as specified and directed.
S&F for Corner glass self assembly size 300mm with chromium plated bracket guard and railing. Make: Prayag Cat No. BEA-44
S&F 15mm health faucet, brass, chromium plated with 1.0 m tube and hook with metalic expandable tube 15mm complete set complete all as specified and as directed. MAKE: Zim Cat No. 1624A or equivalent in Zoloto/Gem/Prayag Model
S&F in repair toilet paper holder, brass, chromium plated, complete all as specified and as directed. MAKE: PRAYAG Cat part No. BA-38
S&F in repairs chromium plated soap dish holder complete all as specified and as directed. MAKE: MAKE: PRAYAG Cat part No. BA-45
S&F Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc. conforming to Fe 410-w.(Gde-E-250 ) quality A complete all as specified and as directed.
S&F 12mm thick toughened glass in required size duly crystal polished at the edges and with full fetched design finalised by GE in different colours fixed with stainless steel brackets of size 50x25mm, 100mm long made out with 3mm thick SS sheet at the top and bottom, stainless hinges& brackets to connecting to SS railings glass to glass, wall to glass connector, magnetic seal, middle seal etc all as directed.
Taking up or down 20mm dia steel tubing connection, including cleaning for refixing or removal to store complete all as specified and as directed.
Taking up or down 25mm dia steel tubing connection, including cleaning for refixing or removal to store complete all as specified and as directed.
S& F for 20mm bore unplasticised PVC pipe of pressure ratings 10kgf/Sqcm including all fittings fixed complete to walls, ceiling or in floor etc complete all as specified and as directed.
S& F for 25mm bore unplasticised PVC pipe of pressure ratings 10kgf/Sqcm including all fittings fixed complete to walls, ceiling or in floor etc complete all as specified and as directed.
S&F for providing 25mm dia Gun Metal, globe or gate valves with iron wheel head, screwed both ends for iron pipes complete all as specified.
Cutting chases in PCC block walls for concealed water tubing etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed by engineer- in- charge.
S&F rotational moulded Polyethylene [HDPE] Water Tanks, Triple Layered, ISI Marked Cylindrical & Vertical Type 500 Litres Capacity hoisted and fixed in position including provision of 40mm/25mm dia spouts for connecting inlet, outlet, over flow and washout pipes including taking down old tanks complete all as specified and as directed by Engineer- in - charge.
S&F for Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe bore dia of 25mm (Minimum weight 455 gms) complete all as specified and as directed by Engineer- in - charge.
M&L for low density polyethylene (LDPE) pipes of 50mm, pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc
Providing precast cement concrete solid building blocks or slabs Type B1 1:2:4 (20 mm graded aggregate) 10cm thick (with plain or interlocking joints as directed) setting in mortar, complete, in walls
Taking down cement plaster of any description on brick or stone walls etc., including raking out joints, hacking for key, scrubbing down with water etc., and removal of debris to outside MD land complete all as specified and as directed.
M&L for rendering 15mm thick in CM (1:4) including mixing water proofing compound on concrete/block masonary surfaces and finished even and smooth without using extra cement complete all as specified and directed.
M&L for preparation of newly plastered surfaces of walls by 3mm wall care putty and applying two coats of distemper oil bound distemper over a coat of primer including levelling the surface complete all as specified and as directed.
M&L for preparation on newly plastered external wall surface and applying two coats of weather proof (exterior grade) acrylic emulsion paint with anti fungal property over a coat of primer of the same manufacturer as that of paint complete all as specified and as directed.
M&L for Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m deep and getting out in any type of soil complete all as specified and as directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm each as in soils complete all as specified and as directed.
Removing excavated material (soils) to a distance not exceeding 50 metres and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed.
Demolition of reinforced cement concrete of any description as in chajja/facia etc and in any position not otherwise specifically provided for incl cutting reinforcement carefully without disturbing the existing structure complete all as specified and as directed.
M&L for plain cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) as in cooping complete all as specified and directed.
M&L for concrete bed in PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in bed with thickness of bed below the barrel of pipe as 100mm and width of bed as 460mm to sewage pipes of 160mm internal dia including packing under, and haunching agianst the sides of pipes after they are laid and tested complete all as specified and as directed.
S&F UD PVC drainage pipes (SJ Type) S165/SN8/SDR34 160mm dia in any length with rubber ring joints laid in trenches complete all as specified and as directed.
Taking down copper/aluminium point wiring(light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.
Taking down old aluminium sub main wiring of any size complete all as specified and directed.
Taking down light fittings of any type complete all as directed
M&L for Point wiring complete with 1.5 Sqmm (nominal area) single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor (with colour coding of Red/Blue/Yellow for phase and Black for neutral), drawn through and including rigid non metallic PVC conduit of suitable size (not less than 20mm dia) and accessories concealed in walls/ceilings etc., including provision of PVC insulated 1.5 Sqmm FRLS cable with copper conductor green in colour for earth continuity and connected to common earth dolly and sunk in modular type pressed steel terminal boxes of suitable modules made out of 1.6mm thick MS sheet duly painted with two coats of anti-corrosive paint all over and modular cover plates with frames on top for suitable modules on top for housing switches, sockets etc., all as specified and as directed for the following:- Make of wire : Polycab/Gloster/Anchor/ Havells/Finolex
ONE LIGHT/FAN point controlled by one, one way 6 Amps modular switch.
ONE 6A SOCKET OUTLET point controlled by one, one way 5 Amps modular switch on independent board.
S & F modular switch, 6 Amp, one way, 1 module 230 V, AC Circuit all as directed Make : ROMA (Anchor)/Havells / Legrand/Simens
S&F socket outlet, modular type, 1 way 6 Amps, 3 pin flush type 230 Volts AC circuit complete all as specified and as directed. Make: Roma (Anchor) / Havells/Simens / Legrand
S&F surface mounted tube light fittings LED 10 watts 2 feet including all accessories and fixing arrangement for fixing the light fitting complete all as specified and as directed MAKE: CG/Philips/Havells
Taking down carefully exhaust fan of any type any capacity and deposit to MES store yard and supply and fixing exhaust fan iron body of capacity of 300 sweep white in colour 220 volts, AC supply complete including the all fixing arrangement of Exhaust fan complete all as specified and as directed. Make : CG Model No : Trans Air 12" Reversible or equivalent make of Havells/Orient/Usha
M&L for Sub main wiring complete with two runs (1P+1N) of 4.0 Sqmm single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor (with colour coding of Red/Blue/Yellow for phase and Black for neutral) and one run of 4.0 Sqmm single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor as earth wire green in colour including lugs, drawn through and including 25mm dia PVC conduit and conduit accessories concealed in wall/ceiling/roof/ floor complete all as specified and as directed. NOTE: Two runs of 4.0 Sqm copper conductor, One run of 4.0 Sqmm copper conductor as earth wire and one run of PVC conduit shall be measured as one unit length.
S&F MCB single pole, 6 to 32 Amps (`C’ series) having current rating 10 KA complete all as specified and directed Make : Indo Asian/Havells/L&T / C & s
M&L for earthing complete with GI earth plate electrode of size 600mmx600mmx6.15mm thick buried directly in ground (earth pit not less than 2.25m deep below the normal ground level) with top edge of the earth plate not less than 1.5m below normal ground level connected to 4mm dia GI earth wire as earth lead connected by means of bolts, nuts, washers and check nuts made out of galvanised iron or steel all as shown on electrical plate No. 3 of SSR Part-I connected to common earth dolly including testing on completion complete all as specified and directed. NOTES: (1) The unit rate shall also include for earth work in any type of soil, PCC (1:3:6) type C1 chamber, pre-cast RCC (1:2:4) type B-1 using 20mm graded stone aggregate cover 50mm thick reinforced with TMT bars 8mm dia @ 100mm c/c both ways, funnel with watering pipe 20mm dia medium grade, GI protection pipe light grade 20mm dia and wire mesh complete in addition to item No. 1(a) to (e) of preamble (notes) under sub-heading earthing, specified on Sl. Page Nos. 422 & 423 of SSR Part-II. (2) Earthing lead and GI protection pipe beyond 7.5m will be measured and paid separately.
CARTWHEEL CONSTRUCTION
Reliance Sales Agency
M/s K Moorthi
JD Construction
V KARTHICK
Bidder Name
CARTWHEEL CONSTRUCTION
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .