REPAIR MAINTENANCE OF INSTALLATION BUILDINGS

Amount

Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc., all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on faces of brick work or concrete surfaces finished even and fair, all as specified and directed.

M&L for rendering 15mm thick in CM 1:6 on faces of brick work or concrete surfaces finished even and fair, all as specified and directed.

M&L for rendering 5 mm thick in CM 1:3 as on ceiling surfaces of brick work or concrete surfaces finished even and fair all as specified and directed.

M&L for preparation of new wall surfaces and applying three coat white wash complete all as specified and directed.

As per Srl item No. 5 above but in old surface one coat of white wash etc complete all as specified and directed.

M&L for preparation of new wall surfaces of wall and applying two coat oil bound distemper over a coat of alkali resistant cement primer complete all as specified and directed.

M&L for preparation of old wall surfaces of wall and applying one coat oil bound distemper complete all as specified and directed.

M&L for preparation of new wall surfaces and applying two coat of cement base paint complete.

M&L for preparation of old wall surfaces and applying one coat of cement base paint complete.

M&L for preparation of new wall surfaces & applying three coat white wash on new ceiling surfaces complete. all as specified and directed.

M&L for preparation of old wall surfaces & applying one coat white wash on ceiling surfaces complete. all as specified and directed.

Taking down chowkats with shutters not exceeding 1.5 Sqm each (without taking off shutters from the frames). all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 Sqm but not exceeding 4 Sqm each. all as specified and directed.

M&L for IInd class hardwood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete. all as specified and directed.

S&F Pressed steel frames size 105x60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete, all as specified and directed.

M&L for MS work as in as in grills / Guards bars fillets for securing wire mesh and similar articles and hold fost, including demolition complete all as specified and directed.

M&L for Preparing surfaces area tarred exc 0.1 sq. m but n exc 0.5 sq. m each of wood and wood based materials, steel and iron work, new or old, of any description and girth, not otherwise described, and treated with tar or coal tar black paint complete. all as specified and directed.

M&L for 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete. all as specified and directed.

S&F Butt hinges, medium weight, cold rolled mild steel, 100 mm size all as specified and directed.

S&F in repair 300 mm long MS ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F floor door stopper overall length of cover plate 150mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete, all as specified and directed

S&F first class hardwood small fittings such as a bracket stopper not exc 200 cucm each complete all as specified and directed.

S&F 300mm aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts fixed. all as specified and directed.

M&L for Resecuring, cutting or easing incl adjusting without taking down shutters n. exc 1 sqm complete all as specified and directed.

S&F Factory made internal PVC Door frame of size 100X45mm with a wall thickness of 5mm made out of extruded 5mm prelim PVC foam sheet of density 600kg/cbm manufactured by an ISO-9001-2008 certified company mitre cut at two corner and jointed with 4 Nos of 150mm long brackets of 15x15mm MS Square tube or fusion heat welding process the two vertical door frames to be reinforced with 40x20mm MS tube of 19 gauge through out the framer. the door frame shall be fixed to the wall using 65/100mm long MS screws through the frame by using PVC Fasteners a minimum of 4 nos of screws to be provided foe each vertical member & minimum 2nos for horizontal member etc complete all as per manufactures Sfd.

S&F 30mm thick factory made solid panel PVC door shutter consisting of frame made out of M s tube of 19 gauge thickness and size 40x20mm for stiles as well as top lock & bottom rails MS frame shall have a cost of metal primer of approved make & manufacture MS frame shall be covered with heat moulded prelam 'C' channel made from5mm (#.25) thick PVC sheet of density 600kg/cbm manufacture by an ISO-9001-2008 certified company of size 30mm thick & 110mm width forming stiles in which 100mm should be flat & 5mm should be taper and 5mm (#0.25) thick 135mm wide PVC sheet for top rail and bottom rail in which 125mm should be flat & 5mm taper on either side an additional 5mm thick PVC solvent cement adhesive panelling of 10mm prelim PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with 30mm wide x 5mm (#0.25) 30mm thick PVC sheet beading either side & additional 30mm wide PVC beading as gap insert below top & bottom rail joined together using solvent cement adhesive 15mm thick 5mm0.25)x 3) 20mm wide corner PVC sheet as gap insert for top and bottom rail door to be fitted with frame with 3 nos ms powder coated butt hinges of size 100mm 25mm &n 50mm longer steel screws drilled suitable to pass through both the wall of the MS tube other hardware's of door should be fixed with 25mm 8mm size steel screws etc. complete as per manufactures Sfd.& drawing including iron mongery all fitting complete all as sfd and directed.

M&L for 150mm length of bolt of aluminium anodised barrel tower bolt complete all as specified and directed.

S&F Extruded aluminium alloy handles, fabricated type, anodised 150 mm size complete all as specified and directed.

M&L for preparation of old wooden surfaces and applying one coat synthetic enamel paint complete all as specified and directed.

M&L for preparation of new wooden surfaces and applying two coat synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F factory made steel window with side hung shutters including box type hinges with steel handle and steel peg stay complete without glazing bars.

S&F factory made steel window with side hung shutters including box type hinges with steel handle and steel peg stay complete with glazing bars.

S & F factory made steel ventilator with top hung shutters complete

S&F Galvanised mild steel wire cloth, 0.56 nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples.

S&F 3 mm thick sheet glass, ordinary quality and glazing with in square n.exc 0.5 sq.m in each pane complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones.

M&L for preparation of new surfaces of steel and applying two coat synthetic enamel paint over a coat of red oxide primer.

M&L for preparation of old surfaces of steel and applying one coat synthetic enamel paint.

Taking up or down steel tubing and connections, 15 mm bore complete all as specified and directed.

Taking up or down steel tubing and connections, 20 mm bore complete all as specified and directed.

S&F Tubes, 15 mm bore 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed

S&F Tubes, 20 mm bore 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F in repair PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to wall or laid in floors. complete all as specified and directed.

As per Srl item No.44 above but 75mm bore. complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends, of any radius provided without access door. complete all as specified and directed.

As per srl item No 46 above but 75mm bore. complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises,

M&L for vitrified ceramic light shade tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match dark shade including screed bed 15 mm thick in CM 1:6 complete all as specified and directed.

As per Srl item No 49 as above but as in skirting including 10mm rendering in CM 1:4 complete all as specified and directed.

M&L for Non- skid ceramic tiles7 to 8 mm thick (square/rectangular) area of each coloured tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles including laying screed bed or bedding layer of mortar 15mm thick in cm 1:6 complete all as specified and directed.

As per Srl item No 51 as above but as in skirting including 10mm rendering in CM 1:4 complete all as specified and directed.

M&L for Non- skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each coloured tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles including laying screed bed or bedding layer of mortar 15mm thick in cm 1:6 complete all as specified and directed.

M&L for glazed ceramic coloured tiles in vertical surface 350 x250 x 7mm / 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match coloured tiles including rendering 10 mm thick on faces of brick or concrete surfaces in cm 1:4 complete all as specified and directed.

M&L for machine cut kota stone slab flooring 18-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including screed bed or bedding layer of mortar 15 m thick for laying floor finishes in cement plaster 1:6, complete all as specified and directed.

As per Srl item no 55 as above but as in skirting including 18-20 mm rendering in CM 1:4 complete all as specified and directed.

S&F in repair Vitreous China water closet squatting pan, 'Orrisa' pattern, size 580 x440 mm white, with integral foot rests complete including connection to trap, and to flushing pipe, anti syphonage pipe etc. including trap set in and including concrete and making good to floor. complete all as specified and directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white including connections to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe including seat cover white etc. complete all as specified and directed.

S&F in repair 10 Ltr capacity PVC valve less syphonic action type flushing cistern low level white including ball valve flat and handle including brackets Flushing cistern and flushing pipe (exclusive of brackets)

S&F in repairs for PVC floor traps plain with grating including jointing with solvent cement 75 mm bore complete all as specified and directed.

S&F in repair wash basins, vitreous China white size 580x450mm size, including cutting for and pinning in ends of brackets or erecting stand including waste pipe and cp waste coupling complete all as specified and directed

Supply only Waste fittings, brass, chromium plated for glazed ware basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed with Low density poly ethylene pipes (LDPE) 0.9 mtr long 32 mm dia pipe.

S&F in repair stop valve, 15 mm dia cast copper alloy, chromium plated with fancy type (angle type) screwed down, high pressure, screwed both ends for iron pipes.

S&F in repair stop valve, 15 mm cast copper alloy, chromium plated with long shank and cup fancy type (concealed type) screwed down, high pressure, screwed both ends for iron pipes.

S&F in repair fancy type, chromium plated bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule 15mm bore.

S&F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

Dismantling PVC water tanks exc 250 but n. exc 500 ltrs complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks white colour 500 ltrs (cylindrical vertical with closed top) rotational threaded tank cover hoisted and fixed in position.

S&F in repair gun-metal stop cock 20 mm bore, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete

S&F Ball valves, high pressure, with polythene float and flynut complete, screwed for iron pipe 20mm bore or brass ferrule and fixed in repairs.

Demolition of brickwork built in any type of mortar, complete all as specified and directed.

M&L for brickwork with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6, complete all as specified and directed.

Demolition of brick tiles laid flat or edges pointed in any type of mortar complete all as specified and directed.

Demolition of Concrete in roof padding, lime concrete / mud puska or any description and in any position not otherwise specifically provided for

M&L for Wire brushing & cleaning top surface of tiles, lime terracing or cement concrete, including flashings & junction of parapets, etc. complete all as specified and directed.

M&L for PCC in roof kerbs of mud stops, rounded or chamfered on edges, including roof padding type B0 (1:2:4) using 12.5 mm graded stone aggregate complete all as specified and directed.

M&L for water proofing treatment to flat roofs and edges (vertical or tapered) etc. in following sequence:- (i) Properly cleaning and drying the surface (ii) Applying a coat of bitumen primer @ 0.3 Kg/Sqm (iii)Applying a coat of hot air blown grade bitumen 85/25 @ 1.2 Kg/Sqm (iv) Laying 3mm thick APP modified glass fiber reinforcement water proofing membrane with 100mm overlaps, sealed and bonded to the surface by 'torchon' method as per manufacturer's instructions complete all as specified and directed. Make: Bengal Bitumen, Ashian paint, Pidilite or equivalent

M&L for 40mm thick brick tiles laid on cement mortar 1:6 and pointing in CM 1:3 15mm thick screed bed complete all as specified and directed.

As per Srl item No. 79 above but but except tile complete all as specified and directed.

M&L for 75mm thick cement concrete type C-2 1:3:6 (using 40 mm graded stone aggregate) as in plinth protection finished surface even and smooth without using extra cement complete all as specified and directed.

Dismantling wrought iron or mild steel or barbed wire, chain link fancing etc work of any description not otherwise provided for complete all as specified and directed.

Dismantling posts or struts embeded in concrete or brick work ( wood , steel or RCC) any section, including taking out embeded portion and making good disturbed ground complete all as specified and directed.

Excavation in post holes ( or similar holes) in soft/loose soil each n. exc 0.50 Cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm, watering and removing surplus soil to a distance n. exc 50 m and making good surface complete all as specified and directed.

M & L for cement concrete type B 1, 1:2:4 (using 20 mm graded stone aggregate as in Columns, pillars, piers, posts and necessary form work complete all as specified and directed.

M&L for MS angle iron post flat, square / pipe tube, round bar such as grills, gratings etc with ends of bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors, post gate, ladders, framed balusters, walk ways, railings, frame work of water tanks and similar work and struts in fencing including cutting tops to shape as directed, drilled holes, notching for wire, etc, flat iron fillets (for securing wire mesh etc.)including all necessary drilling, bolting or riveting screws, etc and similar work complete all as specified

Supply and fix chain link fencing MS galvanised wire mesh made upto topped wire and fixed to any type of fencing post with all necessary fitting and complete all as specified and directed.

M&L for for preparing new surfaces of iron and iron based materials of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over and including a coat of red oxide primer complete all as specified and directed.

Demolition of cement concrete reinforced or unreinforced of PCC flooring, main whole cover or any description and in any position not otherwise specifically provided for complete all as specified .

M & L for for PCC 1:5:10 type D2 (40 mm graded aggregate ) in subase of floor foundation, filling and mass concrete, any type of floor etc complete all as specified and directed

M&L for Machine pressed precast concrete interlocking paver colour block any with grey cement with pigment and confirming to IS 15658 -2006 of 60 mm thickness, M-30 Grade with sand cushion 30 mm thick laying floor finishes complete all as specified and directed.

Note :- Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material.

M/S SATISH KUMAR

HIMANSHU TRADERS

MOHAMMAD RIZWAN CONTRACTOR

A S ENTERPRISES

M/S KESHRI WORKERS