PROVN OF CENTRALISED SOLAR CUM ELECTRIC WATER HEATING SUPPLY FOR OTM ACCN (TRAINEES) AT DILIP COMPLEX, PROVN OF BLDG SECURITY LIGHTS FOR JCOs/OR MD ACCN AND OTHER SANTIONED WORKS OF CMM UNDER AGE E/M

Amount

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendents, holder, bell,bell push,regulators, sockets etc removing materials for taking credit and making good disturbed surfaces of walls, floors, etc

Taking down unservicable/partly unservicable light fittings any type, tube light fitting and fixtures, etc, and making good to the disturbed surfaces of walls/floor etc to macth with existing surfaces including white washing/colour washing/distempering to match with existing wall/floor/ceiling finishes.

Dismantling unserviceable main switch/ kitkat DBs/ MCB including wooden board from existing position and making good disturbed surfaces of wall to match with existing surfaces.

Taking down sub main wiring of any size/capacity complete all as specified and making good disturbed sufaces to match with the existing surfaces.

M & L for point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq mm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty pvc concealed conduit of white/ivory colour including all accessories after chasing in wall/ceilling etc, heavy duty ISI marked with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly, covered with modular white cover palte with inner frame suitable for modular swithes, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed for the following :-

(a)One light point controlled by one, one way switch.

(b) One ceiling /exhaust fan point controlled by one switch and regulator.

(c) one 3 pin 5 amp socket out point on the same board with other switches.

(d) One3 pin 5 amps socket out let point on independent board.

(e) One bell/buzzer point controlled by one bell push.

Description all as per item No 5 here in before but using 2.5 Sqmm single core copper conductor cable of multistranded FRLS, PVC insulated unsheathed 1100 volts grade for 5/15 amps witch socket combination point including necessary running of 2.5 Sqmm copper conductor FRLS, PVC wire as earth continuity conductor alongwith wiring an connecting to the common earth dully, complete all as specified and directed.

S & F for modular Switch piano flush type, single pole, one way and 5/6 Amp, single modular complete all as specified and directed.

S & F for modular Switch piano flush type, single pole, one way and 15/16 Amp, single modular complete all as specified and directed.

S & F for Bell push modular 6 Amps single module complete all as specified and directed.

S & F modular Socket outlet multipurpose having provision for 3 pin, 5/6 Amps and 2 pin, 5/6 Amp, 2 module piano flush type complete complete all as specified and directed.

S & F modular Socket outlet multipurpose having provision for 3 pin, 15/16 Amps and 3 pin, 5/6 Amp, 2 module piano flush type complete complete all as specified and directed.

S&F ceiling rose surface type PVC/Polycarbonate isolated body, 65x 20mm, 3 terminals, complete all as specified & directed.

S & F for modular step type fan regulator 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and directed.

S&F Lamp holder, PVC/polycarbonate type with back plate suitable for battan fittings, complete all as specified & directed.

S & F for Bell Electric Ding dong type suitable for operation on 230 volt 50 Hz, AC supply etc, complete all as specified & directed.

S & F Modular White cover plate with frame with Metal flush box 1 module & modular Telephone socket complete all as specified and as directed.

S&F Modular White cover plate with frame with Metal flush box 1 module & modular TV Co-axial socket complete all as specified and as directed.

S&F Rigid PVC conduit & accessories of nominal dia 25 mm inclusive of all boxes, (junction/terminal) tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks, wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall etc complete all as specified and as directed.

S & F LED light fitting 1 x 9 w bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S & F for wall mounted LED tube light fitting 20 watts batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen output box type fitting, 230 volts and intregrated electronic driver connector block etc and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specefied and directed.

S& F LED light fittings decorative 36/34 Watt recess mounting type extruded metal/aluminium body, and electronic LED driver, connector block etc. with all accessories internal prewired & including connecting up with 3 core flexible copper conductor cable with suitable size and mounting clamps etc complete all as specified and directed Make Philips Cat Pt No RC380B LED36S -6500 G4 L60 W60 PSU OD, or Crompton Cat Pt No LBRP40CL22CD or Wipto Cat Pt No. LM25-481-XXX-65-G1.

S & F LED tube light fittings decorative ultra slim linear fixture with extrudedalluminium heat sink envioromentel friendly Energy efficient ready to use pack ,1x10 Watt ,2 feet,surface mounting type extruded pvc, snap on installers and domestic electronic Driver ,connector block ect.with all assoceries intenallt prewired & includingconeecting up with 2 core flexible cppper conductor cable with sutable size & suitable for and mounting clamps PVC squre box 75x75mm - 2 nos etc. Make- CROMPTION/HAVELLS/SURYA /PHILIPS.

S & F for LED street light fitting of capacity 60 watts with IP 66 prptection and pre-wired and necessary mounting arrangements and provision of 2.5 sqmm three core copper conductor cable multistranded from MCB DB/ceiling rose to light fittig including necessary 40mm dia GI pipe Light grade bracket 1.5 mtr long bend to required shape with clamps, nuts, bolts etc complete all as specified and directed.

Taking down old/unservicable ceiling fan any type and and deposited in MES store and S & F ceiling fan, 230 volts, 1200 mm sweep with service value of the fan shall be greated than 6.1 as per BIS with necessary aceessories and electrical connections for ceiling rose to fan terminal complete all as specified and directed.

Taking down old/unservicable ceiling fan any type and and deposited in MES store and S & F for energy efficient exhaust fan of 300 mm sweep made of metal body ventil Air - DS type complete with louver with bolts nuts and washers size lt 15 cm 12 mm dia embedded in the wall including provision of PVC flexible coppler cable of size 23/0.0076 two core from ceiling rose to exhaust fan for connecttion and making suitable size of hole to existing brick wall for fan base complete all as specified and directed.

M & L for main wiring with approved colour as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 4 Sqmm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc, one run of PVCinsulated with 4 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and directed. Note :- Two runs (with Red/Yellow/Blue colour for Phase + Black colour for Nutral) of 4 Sqmm cable, one run ( with Green colour for Earth) of 4 Sqmm cable and one run of PVC conduit will be measured as one unit.

M&L for main wiring with approved colour as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 6 Sqmm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc, one run of PVCinsulated with 6 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and directed. Note :- Two runs (with Red/Yellow/Blue colour for Phase + Black colour for Nutral) of 6 Sqmm cable, one run ( with Green colour for Earth) of 6 Sqmm cable and one run of PVC conduit will be measured as one unit.

Taking down old/unservicable MCB DB any type and S & F for sheet metal enclosure MCB DB TPN 4 Way vertical type with 200 Amps rated bus bar 415 volts double door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and directed.

S & F for sheet metal enclosure MCB DB SPN 8 Way vertical type with 200 Amps rated bus bar 240 volts double door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and directed.

S & F MCB single Pole and Neutral of capacity 40 Amps, 240 Volts, breaking capcity 10 KA "C" curve complete all as specified and directed.

Supply & fixing MCB SP 6-32 Amps 'C' series, breaking capacity 10 KA of rating

S & F MCB triple Pole and neutral rated capacity 63 Amps, 415 Volts, breaking capcity 10 KA "C" curve complete all as specified and directed.

S & F MCB triple Pole rated capacity 40 Amps, 415 Volts, breaking capcity 10 KA "C" curve complete all as specified and directed.

M & L for earthing complete with galvanized steel earth plate electrode 60cmx60 cmx 6mm thick buried directly in ground vertically (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level connecting to and including GI earth wire of size 4.0 mm by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 15 mm dia medium grade pipe for protection of GI wire to the extent of 7.5 mtrs asearthing lead including charcoal dust and salt packed all around the earth plate in the earth pit all as per Electrical plate ZNo 3 of SSR par - I (2009) including PCC foundation/chamber in mix 1:2:4 type B1 with angle iron frame CI frame, CI cover with provision of locking arrangement and 20 mm dia light grade GI pipe from top edge of the earth plate upto MS funnel with wire mesh provided inside the concrete earth pit for watering arrangement complete including excavation and earthwork in any type of strata and testing complete including fill up the earth pit with soil for best result and removal. Note :- Earth protection pipe & earthing strip upto and including 7.5 m length is deemed included in unit rate quoted by the contractor.

Supply, transporting, erection and fixing steel tubular swaged pole, 9.00 metres long, type 410 SP-31, with, made out of 40 mm dia light grade GI pipe alongwith necessary 40 X 5 mm FI fixing brackets, bolts, nuts, washers etc complete with cast iron base plate, pole cap, finial taper plug, bolts, nuts, washers etc including painting with two coats of aluminium paint over one coat of red oxide primer and marking pole nos with black synthetic enamelled paint including tarring one coat on steel surface embedded in concrete including necessary earth work and excavation, PCC in foundation 1:4:8 type D2, using 40 mm graded stone aggregate and PCC 1:3:6 type C2, using 40 mm graded stone aggregate as in plinth block, disposal of surplus soil to a distance not exceeding 50 m, complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 6.0 sq mm 2 core.

Excavation in trenches for laying of cables ,poles and stay in any type of soil not exceeding 1.5 mtr wide and not exceeding 1.50 mtr deep and getting out.

Returning & filling in, including spreading and leveling, watering and well ramming in layers n.exc. 25cm all as specified and directed by Engr-in-Charge.

Removing excavated soil n.exc 50 mtr and depositing where directed at a level n. exe 1.5mtr above the starting point all as specified and directed.

Unwashed Sand cushioning to under ground cable provided with a layer of 8 cm deep before laying and 15 cm covering above the top edge of cable after laying complete all as specified.Note : maesurement shall be done after puning down of sand.

M & L for Fly Ash bricks Sub-class 'B' locally available laid flat in trenches over sand cushioning for cable protection complete all as speciffied and directed.

M & L for Steel tubing GI light grade for cable protection passing under road /floor or for fixing to poles all as specified and as directed of size 80 mm dia Make - ITC / JINDAL /ZENITH/TATA/ PRAKASH SURYA .

M & L for Steel tubing GI light grade for cable protection passing under road /floor or for fixing to poles all as specified and as directed of size 40 mm dia Make - ITC / JINDAL /ZENITH/TATA/ PRAKASH SURYA

S&F sheet metal clad box suitable for 230 volt 50 Hz AC supply three pin with MCB SP 20/32 Amps including removal of old unserviceable one complete all as specified and as as directed.

M & L for point wiring with PVC insulated unsheathed (FRLS) stranded copper conductor of size 1.5 sqmm (nominal cross sectional area) single core cable of 1100 volts grade in and including PVC Conduit 20 mm or higher size medium grade ISI marked complete with all PVC accessories/fittings or on surfaces as directed at site including new pressed mild steel terminal sunken box made out of 1.2 mm thick sheet covered with & including new 3 mm thick plastic laminated hard glossy surface sheet top cover concealed in wall with brass screws & brass cup washers including continuous earth wire of green colour PVC insulated unsheathed 1100 volts grade single core cable, 1.50 sqmm stranded copper conductor, connected to all fittings, sunk boxes, earth pointing sockets, connected to common earth, earth, copper lugs of One light /fan /bell /exhaust fan point controlled by one, one way 5/6 switch or bell push one way 5/6 Amp dolly complete all as specified & directed . Note :- The length of point wiring shall be more than 7.5 RM and upto 10.00 RM .

S&F switch piano, flush type single pole one way 5 Amps complete all as directed by Engr-in-charge.

S & F for Bldg security LED light fitting of capacity 45 watts with IP 66 prptection and pre-wired and necessary mounting arrangements and provision of 2.5 sqmm three core copper conductor cable multistranded from ceiling rose to light fittig including necessary 40mm dia GI pipe Light grade bracket 1.5 mtr long bend to required shape with clamps, nuts, bolts etc and fixed on outer wall of bldg complete all as specified and directed by Engr-in-Charge. Make : Philips Cat Partt No BRP022 LED 45 CR MR SI PSU GR or equeivalent to HAVELLS/BAJAJ. Note : the light fitting shall be fitted with bracket made of GI tubing medium grade of suitable size including fixing clamps on the outer wall of bldgs etc cost are inclusive of items rate).

Supply, Install, testing and Commissioning of 'Solar Hot Water System' (Flat Plate Collector) based on indirect transfer of heat of capacity 200 LPD with electrical heating back up, motor and all assy complete all as specified and directed. Note :- Rate of solar water system includes the cost of backup stainless steel hot water tank insulated , motor and all assy complete.

Supply, Install, testing and Commissioning of 'Solar Hot Water System' (Flat Plate Collector) based on indirect transfer of heat of capacity 500 LPD with electrical heating back up, motor and all assy complete all as specified and directed. Note :- Rate of solar water system includes the cost of backup stainless steel hot water tank insulated, motor and all assy complete.

Supply, Install, testing and Commissioning of 'Solar Hot Water System' (Flat Plate Collector) based on indirect transfer of heat of capacity 1000 LPD with electrical heating back up, motor and all assy complete all as specified and directed. Note :- Rate of solar water system includes the cost of backup stainless steel hot water tank insulated, motor and all assy complete.

M & L for fabrication of angle iron frame stand with equal angle of size 40 x 40 x 6 mm suitable for Solar water heater and fixing arrangement complete all as directed by Engr-in-Charge.

M & L for PCC 1:2:4 type B1 using 20mm graded stone aggregate in coping of poles/foundation for poles, struts, posts etc including necessary form work, finished the exposed surfaces fair and even without using extra cement complete all as specified and directed

Supply & fixing Hot water pipe duly insulated with glass wool and aluminium cladding 20 mm bore with and including all fittings such as flanges, unions, reducer sockets, socket, reducing bends, elbows, tee, checknuts, caps, plugs etc. laid in wall/floor/roof complete all as specified and directed.

Supply, fixing, laying & testing galvanised steel (GI) water tubing 'medium grade' of 20 mm dia with and including all GI fittings such as flanges, unions, reducer sockets, socket, reducing bends, elbows, tee, checknuts, caps, plugs etc. laid in wall/floor/roof complete all as specified and directed.

Supply & fixing 500 Ltr Rotational moulded polye- thylene water storage tanks (cylindrical vertical with closed top) hoisted, Adapter, socket, union, washers etc and fixed in position of incoming & outgoing water pipe line etc complete all as specified & directed by Engr-in-Charge.

Supply & fixing 1000 Ltr Rotational moulded polye- thylene water storage tanks (cylindrical vertical with closed top) hoisted, Adapter, socket, union, washers etc and fixed in position of incoming & outgoing water pipe line etc complete all as specified & directed by Engr-in-Charge.

Supply & fixing 2000 Ltr Rotational moulded polye- thylene water storage tanks (cylindrical vertical with closed top) hoisted, Adapter, socket, union, washers etc and fixed in position of incoming & outgoing water pipe line etc complete all as specified & directed by Engr-in-Charge.

Supplied and fixed 20 mm dia gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

Supplied and fixed 25 mm dia gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

Supplied and fixed 40 mm dia gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

Supplied and fixed 20 mm dia bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified and directed.

M&L sub main wiring (concealed type) in & including PVC Rigid Conduit of 25mm dia with two single core FRLS PVC insulated unsheathed cable, 1100 volts, grade having stranded copper conductor of 2.50 sqmm nominal cross sectional area each drawn into and all accessories including one single core 2.50 sqmm copper conductor for earth continuity conductor connected to earth dolly complete all as specified and as directed. Note : Two run single core cable, one run of earth conductor and one run of PVC conduit shall be measured as a unit length.

S & F for sheet metal enclosure MCB DB SPN 2 Way vertical type with 200 Amps rated bus bar 240 volts double door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of 10 Sqmm 2 Core size complete all as specified and as directed.

Supply and laying for galvanised iron tubing of size 25 mm dia, midium grade with and including all fittings such as bends, elbows, tees, short pieces, union etc in trenches complete all as specified and as directed.

Supply and laying for galvanised iron tubing of size 40 mm dia, midium grade with and including all fittings such as bends, elbows, tees, short pieces, union etc in trenches complete all as specified and as directed.

M & L for cutting existing steel tubing of dia 40 /50 mm dia pipe line and after screwing adding with and including all fittings such as bends, elbows, tees, short pieces, union etc in trenches as per site requirment complete all as specified and directed.

M & L for construction of valve chamber of internal size 400 x 400 x 600 mm suitable for 80mm dia sluice valve including necessary earth work excavation PCC 1:4:8 in foundation type D2 using 40mm graded stone aggregate, brick wall in CM 1:4, PCC 1:2:4 type B1 for coping, 15mm thick rendering in CM 1:4 including provision of MS sheet cover 3.0mm thick with MS angle frame 25 x 25 x 3mm all round and at diagonals of size 40 x 40 x 6mm and also MS plate welded to MS angle as shown in drawing, embedded in concrete with suitable hinges and locking arrangements, including two coats of synthetic enamel paint over a coat of red oxide primer necessary excavation earth work etc, all as specified and as directed.

Supply and fix float valve of size 25 mm dia, complete all as specified and as directed.

Schedule of credit amount of Rs. 3,701.00 to be deducted during AOC

R K TRANSFORMER

Goodluck Enterprises

SHIVALIK ENGINEERING WORKS

Skyline Encon

M/s Ajayshwar Singh Rana