SPECIAL REPAIR TO BLDG NO. P-04 (OFFRS MESS) OF MH PRAYAGRAJ UNDER GE (WEST) PRAYAGRAJ.

Amount

Demolition of brick work built in cement mortar including all quoins, arches, pillars, etc., complete all as specified and directed.

M&L for brick work with fly ash old size bricks straight or curved on plan exc 6 m mean radius built in cm (1:6), complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement, complete as specified and directed

Taking down cement or cement lime plaster on brick or stone walls etc including raking out joints hacking for keys scrubbing down with water etc., complete as specified and directed

M&L for rendering 15 mm thick in cement mortar (1:4) on fair faces of brick work or concrete surface mixed with water proofing compound @ 3% by weight of cement or as per manufacturer's instructions, finished even and fair without using extra cement complete, all as specified and directed. Note :- WPC shall be measured & paid separately.

Supply only liquid water proofing compound ISI marked, complete as specified and directed

M&L for preparation of new plastered walls of any description, applying white cement based wall care putty(Birla/JK white) on the surfaces with 3 mm uniform thickness making surface absolutely smooth by grinding with sand paper and applying two coats of oil emulsion distemper over a coat of primer of approved shade on new surface of wall, complete all as specified and directed.

M&L for preparation of old plastered walls of any description, applying white cement based wall care putty(Birla/JK white) on the surfaces with 3 mm uniform thickness making surface absolutely smooth by grinding with sand paper and applying two coats of oil emulsion distemper over a coat of primer of approved shade on new surface of wall, complete all as specified and directed.

M&L for preparation of new plastered surafces of wall and applying two coats of cement based paint, complete all as spd and directed.

M&L for preparation of old plastered surfaces of walls by washing, rubbing down and stopping of distempered and painted surfaces and applying one coat of Cement Base Paint, complete all as specified and directed.

M&L for preparation of old painted surface of wood and wood based materials of any discription, not otherwise described, over 10cm in width or girth and applying one coat of synthetic enamel paint, white or tinted, complete all as specified and directed.

M&L for preparation of old painted surface of steel and iron surface of any discription, not otherwise described, over 10cm in width or girth and applying one coat of synthetic enamel paint, white or tinted, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed

M&L joint free vitrified ceramic coloured double charged tiles of 10mm thick area of each tile exceeding 0.18 and n.exc 0.36 Sqm in floor, shelves etc, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including 15mm thick screed bed or bedding layer in cement mortar 1:6, complete as specified and directed

M&L for Vitrified Ceramic coloured double charged tiles 10 mm thick (square/ rectangular) polished, area of each tiles exc 0.18 and n.exc 0.36sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 10mm thick screed bed in CM 1:4, complete all as specified and directed.

M&L for joint free non skid, ceramic “coloured” digital tiles 7 to 8mm thick area of each tile exceeding 0.11 and n.exc 0.18 Sqm in floor etc, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including 15mm thick screed bed or bedding layer in cement mortar 1:6, complete as specified and directed

M&L for Glazed ceramic coloured tiles 450 mm x 350 mm x 7 mm thick, in skirting, dados, risers to steps, etc set and jointed in neat cement slurry, and pointed in coloured cement to match tiles over and including 10mm thick rendering or backing layer in cement mortar 1:4, complete all as specified and directed.

M&L for Marble work Udaipur Green or any approved colour 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including 10mm thick rendering in CM 1:4, complete all as specified and directed by Engineer-in-Charge.

S&F exterior finish designer wall tiles, coloured, superior quality, exc 0.09 and n.exc 0.18 Sqm each , 8mm thick as in wall etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6, complete all as specified and directed.

M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab ncluding rubbing and polishing including 15mm thick screed bed or bedding layer in cement mortar 1:6, complete of item all as directed.

Demolition of stone slabs and tiles laid dry or laid dry and pointed of any description or thickness in floors, aprons etc., complete as specified and directed

M&L for 80mm thick M-40 grade factory made rubber moulded vaibratory cement concrete coloured (red, yellow or both in combination) interlocking paver block any shape and size conforming to IS 15658-2006 with grey cement and pigment as approved laid over and including 50mm thick sand cushion and joints filled with sand, complete all as specified and directed.

M&L for rubber moulded chequered cement concrete coloured tile 30cm X 30cm X 25 mm thick with grey cement and pigment set jointed and pointed in neat cement siurry mixed with pigment over screed bed or bedding layer 15 mm thick in CM (1:6) in floor, complete as specified and directed

Dismantling wall and ceiling boards or insulation boards, any thickness, any description, including cover fillets, complete all as specified and directed.

S&F solid PVC wall lining consisting 5mm thick single side prelaminated PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications, complete all as specified and directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing with solvent on to wall to make PVC frame as per specifications, complete all as specified and directed.

S&F 4mm thick E-boards tiles (Make: Everest or equivalent as approved) false ceiling with powder coated GI snap grid frame work (Make: Armstrong/Saint Gobain or equivalent as approved) including cutting holes in brick wall built in cement mortar & making good in cement concrete 1:2:4 type BO/Cement mortar 1:3 complete all as specified and directed including all necessary drilling and necessary arrangement to fix electrical items as under:- (a) 25x25x1.6mm thick GI angle powder coated duly plugged @ 600mm centre to centre along perimeter of wall. (b) 25x25x1.5mm thick GI tee powder coated as main and cross runners suspended with 1.6mm dia GI wire suspenders with adjustable clamps and dash free fastners plugging in RCC slab placed @ 600mm centre to centre from perimeter of wall. (c) Fixing of 4mm thick E-boards tiles of size 595x595mm of approved texure and finished complete with two coats of oil emulsion distemper on ceiling. Note:- The complete ceiling work shall be done as per manufactures instruction and as directed.

Demolition of mud in roof, any thickness including plastering and leaping (where full thickness recoved or only a part there of disposal off rubbish upto a distance n.exc 100m, complete as specified and directed

M&L for normal water proofing treatment on roof slab consisting with following operations :- (i) Existing surface shall be cleaned of all dust, fungus, moss and other foreign material etc by using wire brush & dusting, Apply a layer of bituminous primer conforming to IS 3384 @ 0.4 Lit/m2 on the surface. Laying 3mm thick APP membrane having non-woven polyester matt at core and under surface coated with plastic polythene film. Laying shall be done using butane torch maintaining 100mm ie overlap & 150mm end overlap, sealling all overlaps complete including treatment at all junctions & corners. The membrane shall be tucked into groove on vertical plane and groove sealed with cement mortar. The treatment shall be provided upto 200mm height above finished floor (Note- The membrane shall have tensile strength of 700N/cm² in longitudinal direction and 450N/cm² in transverse direction at 23 degree celcius, Flow resistance>120 degree celcius, dimensional stability < 0.5% when tested as per ASTM D 5147. The laying of the membrane shall be done through authorized applicator of the manufacturers' (ii) Again applying hot bitumen 85/25 @ 1.2 Kg per Sqm over water proofing membrane. (iii) Dusting dry sand @ 0.75 Kg per Sqm over the membrane indicated above.

M&L for preparation of new or previously untreated surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coat of aluminium paint, complete all as specified and directed.

Taking down chowkhat or frames with shutter area n-exc 1.5 Sqm each(without taking off shutters from the frame), complete all as specified & directed.

Taking down chowkhats or frames with shutters exc 1.5 Sqm but not exc 4 Sqm each (without taking off shutters from the frame), complete all as specified & directed.

M&L for factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately), complete as specified and directed Note:- For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

All as per item No. 33 as above but of frame size 65mm x 125 mm, complete as specified and directed

M&L plain cement concrete (1:2:4) type B-1 using 20 mm graded crushed stone aggregate as in coping including weathring slightly rounded or chamfered angels and throating, complete as specified and directed

M&L for two coats of synthetic enamel paint over a coat of red oxide on new steel surfaces , over 10 cm in width or grith not other wise described, complete as specified and directed

S&F MS work as in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and taples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete as specified and directed

S&F providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. Note:- Stainless steel butt hinge and necessary S.S screws shall be paid separately.

S&F 30mm thick factory made wire mesh solid WPC Door Shutter consisting of Density 650 Kg /Cbm Manufactured by an ISO-9001-2015 certified Company, Door to be panelled with SS mosquito Mesh and XTN aluminium Mesh for additional strength and safety purpose. (confirming as per S:4020). The door should be water proof, termite proof, fire retardant and having screw holding capacity. Door to be fixed to frame with 3 Nos. M.S powder coated butt hinges size 100mmx25mmx2mm and 32mm long steel screws drilled suitable to pass through both the walls of the M.S tube.Other hardwares should be fixed with 19x6mm size steel screws etc. Complete as per direction of Engineer-in -charge, manufacturer's.

S&F door closer hydraulically regulated aluminium (extruded section body), designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed, complete as specified and directed

S&F double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, complete as specified and directed

S&F solid PVC moulded door frame of size 50mm x 47 mm made out of 5 mm thick single side prelam PVC sheet reinforced with MS square tube complete all as specified and directed.

S&F factory made solid PVC moulded door shutters with particle board core 28 to 30 mm thick (stiles) with 2, raised panel design with 2 mm thick moulded Prelam on front face and 2 mm thick prelam PVC sheet on back side, completed all aspecifed and directed.

S&F MS butt hinge cold rolled medium weight of size 100mm etc, complete all as specified & directed.

S&F MS 150 mm pressed handles oval type stove enamelled black, complete all as specified & directed.

S&F for MS barrel tower bolts of extruded section 200 mm long complete all as specified & directed.

S&F 150mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, complete all as specified & directed

S&F 300mm long MS sliding door bolts , plate type ,stove enameled black , with bright bolt not less than 12mm dia with and incl minimum of 6 bolts and nuts ,four on bolt plate and two on staple complete as specified and directed

M&L for applying two coats of synthetic enamel paint on new wooden surfaces of any description over 10 cm width or girth over a coat of pink primer including preparation of surfaces, complete as specified and directed.

S&F providing and fixing factory made uPVC white colour Sliding window Three track (Area not exceeding 2.00 sqm each) made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 Nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories, complete as specified and directed Note:- The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured or payment purpose.

Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately). Note:- For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

M&L for 5mm thick sheet glass ordinary quality and glazing with oil putty in square n-exc 0.5 sqm in each pane, complete all as specified & directed.

S&F Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified & directed.

S&F in repair for galvanised MS wire cloth of 0.56 mm nominal dia of wire and average width of aperture 1.18 mm fixed with tinned tack for galvanized wire staple, complete as specified and directed

Dismantling PVC water tanks and removing for capacity exceeding 250 litres & not exceeding 500 litres etc., complete as specified and directed

S&F for 500 ltr capacity rotational moulded polyethene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position including tank nipple etc all as specified in SSR part I

S&F 5mm thick looking mirror with bevelled edges including suitable SS studs, complete all as specified and directed

S&F in repair gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed of 20 mm bore, all as specified and as approved by GE/Engineer-in-Charge.

S&F in repair 25mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/20mm - 210 gms/25mm-455gms/ 40mm - 690 gms), complete as specified and directed.

Taking up or down steel water tubing and connections of 15mm bore, fixed in walls, ceiling, floors, trenches etc., complete as specified and directed.

Taking up or down steel water tubing and connections of 20mm bore, fixed in walls, ceiling, floors, trenches etc., complete as specified and directed.

Taking up or down steel water tubing and connections of 25mm bore, fixed in walls, ceiling, floors, trenches etc., complete as specified and directed.

S&F GI Steel water tubes medium grade, ISI marked, galvanised, 15mm bore with all fittings, fixed to walls and ceiling or laid in floors complete as specified and directed.

S&F GI Steel water tubes medium grade, ISI marked, galvanised, 20mm bore with all fittings, fixed to walls and ceiling or laid in floors complete as specified and directed.

S&F GI Steel water tubes medium grade, ISI marked, galvanised, 25mm bore with all fittings, fixed to walls and ceiling or laid in floors complete as specified and directed.

All as per item No 65 herein before but refixing old steel tubing with & including all new fitting, complete all as specified and directed.

All as per item No. 66 herein before but refixing old steel tubing with & including all new fitting, complete all as specified and directed.

All as per item No. 67 herein before but refixing old steel tubing with & including all new fitting, complete all as specified and directed.

M&L for cutting chases pinning in making good to facing where required for concealed water tubing and making good cutting not exc 10cm girth in brick walls, complete as specified and directed.

S&F in repair vitreous china counter top wash basin, white, oval shape of size 600x400x185mm fixed on granite including cutting for and pinning in ends in CM 1:3 including 32mm dia cp waste coupling and 32 mm dia PVC waste pipe including fixing of pillar tap, waste fitting etc, complete all as specified and directed.

S&F in repair 25mm dia stainless steel pipe as in curtain rods including brackets and fancy type end knobs, complete, all as specified and directed.

S&F in repair CP Stop valve/angle valve 15 mm bore (weight should not be less than 0.4kg each), fancy type chromium plated screwed down, high pressure crutch or butter fly handle screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed.

S&F in repair CP Stop valve/angle valve 15 mm bore (weight should not be less than 0.4kg each), fancy type chromium plated with long shank and cup (concealed type), high pressure crutch or butter fly handle screwed both ends screwed for iron pipe or for unions, complete all as specified and directed.

S&F in repair china wash down water closet pan (padestal pattern) white trap including plastic water closet seat cover white/coloured with flat bottom and mild steel chromium plated or aluminised hinging device, connection to drain (or outgoing pipe) pipe and flushing pipe , anti syponage pipe, etc complete including making good to the floor, complete all as specified and directed.

S&F in repairs PVC valveless symphonic action type low level flushing cistern (ISI marked) of 10 litre capacity including 32 mm dia PVC flush pipe connected to water closet with inlet, ball valve, float and handle, complete as specified and directed. See make as list of make.

S&F in repair plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, complete as specified and directed.

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position, complete as specified and directed.

S&F in repair PVC connection 15 mm size with PTMT nuts of length 450mm, complete as specified and directed..

S&F in repair for grating doom 100 mm dia of SS (Minimum weight 25gms), complete as specified and directed.

S&F in repair bib taps 15mm bore, fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed including accessories complete all as specified and directed.

S&F in repairs brass chromium plated shower rose 125 mm size without swivel joint including fixing to steel pipe of 15mm bore or union, complete as specified and directed.

S&F in repair Tubular towel rail of brass chromium plated, 20 mm dia, 'D' type, 60 cm long between flanges, complete as specified and directed.

S&F in repair Soap dish, stainless steel, fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F in repair PVC (SWR) floor trap plain with grating including jointing with solvent cement 75 mm dia, complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc. 15 cm thickness (below or above ground level), complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C2 using 40 mm graded crushed stone aggregate as in plinth protection surface finished fair and even, complete as specified and directed. Note :- Plinth protection shall be of width as directed and shall be laid to slope of 1:30 in alternative bays not exceeding 3 meter in length. Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic (1:3).

S&F Stainless steel six peg hanger chromium plated as approved by engr-in-charge, complete all as specified and directed.

Demolition and breaking up or taking down PVC/AC/CI/SSW 100mm/75mm bore pipe drain pipes, set in cement mortar including PCC haunching and bedding, complete as specified and directed.

S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including PVC holding clamps, complete as specified and directed.

S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including PVC holding clamps, complete as specified and directed.

S&F 110mm bore PVC (SWR) bend with oval access door, any radius complete all as specified and directed

S&F 75mm bore PVC (SWR) bend with oval access door, any radius complete all as specified and directed.

S&F PVC (SWR) junction single (single T), equal or unequal, 75 mm bore, complete all as specified and directed

S&F PVC (SWR) junction single (single T), equal or unequal, 110 mm bore, complete all as specified and directed

S&F PVC (SWR) 110mm dia branch piece, single(single Y) equal or enequal complete all as specified and directed

S&F PVC (SWR) 75mm dia branch piece, single(single Y) equal or enequal complete all as specified and directed.

M&L in repair PVC (SWR) gully trap 125/110mm, setting and jointing with solvent cement, complete as specified and directed.

Supply & fix stainless steel accessories suitable for kitchen cabinets as under :-

Stainless steel basket (Plain) of size 50cmx37cmx10cm made of 4mm thick SS wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers of approved make complete as specified and directed. Make :- Hitachi/Godrej or equivalen as approved by GE.

Stainless steel thali basket (11-13 division) of size 50cmx37cmx20cm made of 4mm thk SS wire approved quality with suitable arrangement for fixing telescope basket (Channel) 18'/20' length two way extruded MS galvanised over rollers of approved complete as specified and directed. Make :- Hitachi/Godrej or equivalen as approved by GE.

Stainless steel plate basket (11-13 division) of size 50cmx37cmx16cm made of 4mm thk SS wire approved quality with suitable arrangement for fixing telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers of approved complete as specified and directed. Make :- Hitachi/Godrej or equivalen as approved by GE.

Stainless steel partition basket (11-13 division) of size 50cmx37cmx16cm made of 4mm thk SS wire approved quality with suitable arrangement for fixing telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers of approved complete as specified and directed. Make :- Hitachi/Godrej or equivalen as approved by GE.

Stainless steel cutlery basket of size 50cmx37cmx10cm made of 4mm thk SS wire and bottom of SS perforated sheet approved quality with suitable arrangement for fixing telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers of approved complete as specified and directed. Make :- Hitachi/Godrej or equivalen as approved by GE.

Stainless steel basket (Plain) of size 50cmx37cmx16cm made of 4mm thick SS wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers of approved make complete as specified and directed.

Stainless steel bottom full out of size 50cmx40cmx16cm in two tier made of 4mm thk SS wire approved quality with suitable arrangement for fixing Telescopic basket (channel) 18'/20' length two way extruded MS galvanised over rollers of approved make complete as specified and directed. Make :- Hitachi/Godrej or equivalent as approved by GE.

Telescopic basket (channel) 18/20 inch length extruded MS galvanised over rollers of approved make. Make:- Hitachi or equivalent as approved by GE.

Magnetic catches with steel body 'H' type, fixed to shutter complete as specified and directed.

150mm dia SS handle fancy type polished bright finish complete as specified and directed.

100mm dia SS handle fancy type polished bright finish complete as specified and directed.

Continuous (Piano) hinges, mild steel, bright finish, 30mm width of flap (when opened), complete as specified and directed.

M&L for concrete bed to drain pipes in PCC (1:3:6) type C 2 using 40mm graded crushed stone aggregate including packing under and haunching against the sides of pipes after are laid in step and tested for 150 mm bore sewer line (excavation and earth work for sewer pipe line measured and paid separately, complete as specified and directed.

M&L in repair 150mm dia Reinforced concrete pipes, class NP2 with collers, laid and jointed, complete as specified and directed.

M&L for PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) in surface channels and drain, complete all as specified and directed at site.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete as specified and directed.

M&L for pre cast RCC type B-1 (1:2:4) using 20mm graded crushed stone aggregate for cover slab of manhole complete all as specified and shown on drgs and slab set in cm (1:4) including necessary form work complete as specified and directed.

S&F MS TMT bars ,10mm dia and over cut to length bent to shape required including cranking bending hooking ends and binding with mild steel annealed wire not less than 0.9mm dia confirming to IS-432 (Pt-I), complete as specified and directed.

Removing of surplus excavated soil to a distance not exceeding 50M and deposited where directed at a level not exceeding 1.5M above the starting point, complete as specified and directed.

M&L for cement concrete type B-1, 1:2:4 (20mm graded aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete as specified and directed.

M&L Fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc., complete all as specified and directed.

M&L Fair finished drain or channel to each 25mm girth or Part there of over or under 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc., complete all as specified and directed.

Returning filling in including spreading ,levelling,watering and well ramming in layers n exc 25 cm soft/ loose soil complete all as specified and as directed.

Removing of surplus excavated soil to a distance exc 250m and n.exc 500m and deposited where directed at a level not exceeding 1.5m above the starting point, complete all as specified and directed.

S&F TMT bars 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

Supply, laying, jointing and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 sqmm 3.5 core complete all as spd and directed.

Excavation in trenches, in any type of soil not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr in depth for laying of cable or pipes etc and getting out trimming the sides, forming bottom surfaces to required level complete all as specified and all as directed.

M&L for 40 mm dia GI tubing light grade with all necessary fittings laid in trenches, fixed to walls/ poles/ under road/ floor etc for cable protection, complete all as specified and directed.

M&L for sand cushioning with a layer of sand 80 mm thick before laying of cable and 150 mm thick after laying of cable in trenches complete all as specified and directed.

Supply and laying of well burnt bricks, sub class 'B' laid flat in trenches for protection of cable, complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 60 x 60 cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised iron wire 4mm dia as earth lead wire by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in Electrical plate No. 3, MES SSR Part I- 2009 with 15 mm dia medium grade GI pipe as a protection to earthing lead and 20 mm dia medium grade GI pipe for watering purpose including excavation & earth work in any type of soil, funnel, wire mesh, RCC pit with cover, cast iron frame complete and connected to earthing test point all as specified or indicated including testing on completion. Note:- (i) The concrete pit shall be PCC (1:3:6) type C-1, 40mm thick precast cover slab of RCC with suitable Mild steel handle in lieu of cast iron cover shown in electrical plate No 3 of MES SSR Part-I (ii) PCC pit shall be provide at least 500 mm away from the earth pit and not on just on the eath pit and extra cost of additional length of water pipes and fittings junction etc shall be deemed to be included in the rate. (iii) Item includes the cost of 7.5 metre earth lead wire and GI pipe for protection of earth wire. Any varriation in quantity shall be adjusted.

S&F sheet metal enclosure TPNL MCCB DB 4 way, 415 V (vertical type) with bus bar double door type IP 43 - IK 09 with 250 A copper busbar for each phase for DB when MCCB 160/125 Amps (as incomer) to be used, fixed properly on / in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs for cables/wires, complete all as specified and directed. Make - Legrand Cat Part No. 5077 45 or Equivalant as Approved by GE. Note :-(a) MCBs/MCCB shall be measured and paid separately. (b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch.

S&F MCCB 160 Amps, 4 Pole, 415V, 25KA adjustable type complete all as specified and directed. Make - Legrand Cat No 6690 30 or Equivalant as approved by GE.

M&L for two single core (submain) FRLS PVC insulated unsheated copper conductor of 10.00 Sqmm nominal dia and one single core green PVC insulated unsheathed copper conductor conductor earth continuity cable of 10.00 sqmm nomianal diaunsheathed is drawn in and including non metallic, medium duty, rigid PVC conduit not less than 20 /25mm dia concealed in wall including all conduit and fixing accessories including cutting chases & making good to disturbed surfaces with cement mortar ratio of 1:4 and colour wash, complete all as specified and directed. Note :- (i) The cost for cutting, chases required shall deemed to be included in the quoted unit rate. (ii) Two run of submain wire, one run of earth wire and one run of PVC conduit shall be measured one unit length.

S&F in replacement, double door metallic sheet metal enclosure for DB when MCBs to be used SPN 8 ways, 240 V with 100 Amps rated bus bar IP 43 - IK 09 complete fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires, complete all as specified and directed. Make - Legrand Cat Part No. 5076 11 or Equivalant as Approved by GE

Supply and fixing in replacment of 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 Amp, in the MCB DB Complete with connection testing and commissioning.

Supply and fixing in replacment of 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 40/63 Amp, in the MCB DB Complete with connection testing and commissioning.

Supply and fixing in replacment of 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles & Neutral and current carrying capacity 40 to 63 Amp, in the MCB DB Complete with connection testing and commissioning.

Taking down carefully aluminium batten point, wiring for light/fan/socket/bell or power point including. All fittings i.e. switch, sockets, ceiling rose, regulators, batten holders, etc. Complete and making good disturbed surfaces of wall/floor to match with the surroundings of wall/ceiling/floor etc including taking down old light fittings. Note :- (i) Contractors quoted rate of this item deemed inclusive of unscrewing of the serviceable fittings and fixture as directed (ii) Quoted rate also deem to be included cost of cutting chases for taking out concealed conduit and nitch for terminal box. (iii) Exhaust fan and ceiling fan shall be taken down in under separate item of this schedule.

M&L for point wiring with FRLS PVC insulated unsheathed multistranded copper conductor cable 1.5 sqmm (nominal area) 1100 volts grade concealed in the wall/roof, along with one single run of same size and type of copper wire as continuous earth wire to common earth dolly drawn in and including non metallic PVC rigid, medium grade conduit with all fixing accessories of 20 mm dia and modular sunken box and modular cover plate/frame any module as required and making good to match with the existing surface of wall complete all as specified and directed for the following :-

One light/fan/bell point controlled by one switch complete all as specified and directed.

One point for socket outlet 5 amps on independent board, complete all as specified and directed.

One point for socket outlet 5 amp same board, complete all as specified and directed.

All as per same in item No. 127 above but for one socket outlet 16 Amp on independent board with 4.0 Sq mm cable and 4.0 Sq mm earth wire. (power point 15 Amps sockets)

S&F in repair ceiling rose surface type bakelite 65mmx50mm three terminal complete all as specified and directed.

S&F angle/batten type holder insulated body with back plate suitable for light point complete all as specified and directed.

S&F call bell, ding dong type, AC, 230 V, single pole complete all as specified & directed.

S&F modular switch 1 way, 6 amps, 230V AC, one way complete all as specified & directed.

S&F modular socket out let 2-in-1, 3 pin, 6 amp flush type 2 module complete all as specified & directed.

S&F modular switch flush type 16 amps, 230V AC single pole one way complete all as specified & directed.

S&F modular socket out let 2-in-1, 3 pin, 5 & 16 amp flush type 2 module complete all as specified & directed.

S&F modular fan regulator, 5 stepped, electronic type, single phase, 120 watt, socket size incl connection, complete all as specified & directed.

S&F modular bell push flush type 6 amp, 1 module SP , 230V AC, complete all as specified & directed.

Supply and fixing ceiling fans complete with blades, down rods, and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) as specified and directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm, complete all as specified and directed..

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and directed.

S&F LED tube light fittings decorative ultra slim linear fixture with extruded alluminium heat sink envioromentel friendly Energy efficient ready to use pack ,20 Watt ,4 feet,surface mounting type extruded pvc, snap on installers and domestic electronic Driver ,connector block ect.with all assoceries internally prewired & including coneecting up with 2 core flexible cppper conductor cable with sutable size & suitable for and mounting clamps complete all as specified and directed.

S&F in replacement of existing worn out LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified by Engineer-in-Charge

Supply & fixing energy efficient LED light of 10 Watt of length - 02 Feet long having minimum 1150 Lumen output, wide voltage protection range 140-270 Volt AC housed in extruded aluminum housing (enhances safety) with high quality polycarbonate diffuser including making connection with two core PVC insulated, sheathed copper conductor cable of size 23/0.0076, complete all as specified and directed.

Supply and fix decorative LED fittings wall mounted with LED lamp opal glass shade esthatic look with premium synthatic and metal combination including 10 watt LED bulb including connection and fixing arrangement, complete all as specified and directed.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection including bracket for street light made out of 40 mm bore GI pipe medium grade not less than 1.2 mtr length bent at 120 degree to shape fixed on pole/wall with and including 50x6mm FI clamps = 02 Nos with nut bolts, washers including painting of clamps with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Taking down carefully sub main wiring of any Nos of wire and size with earth wire on wooden batten/surface conduit/casing caping complete with its all accessories, complete all as specified & directed.

Supply and fix electric water heater, storage type steel body with inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. as specified and directed.

SEAHAWK ENTERPRISES PVT LTD (BID ID -3309945)

M/S CHANDRIKA PRASAD AND SONS (BID ID -3304079)

Channa Brothers and Co. (BID ID -3308212)

M/S SWATI CONSTRUCTION (BID ID -3306674)