Remaining works of Town Hall Jaisalmer

Provinding and fixingof Photo Luminescent self charge Exit sign boards of approximate size 12''*6'' with LED Emergenct light with 3 Hour battery backup the color combination and letter size shall be in accordance with IS : 9457- 1980 IS: 12349-1988 of Glow lite Tecjnoware, EATON, ABb

Providing and fixing of Concealed strip lighting Linear LED for flexible and individualized lighting Make- Osram/Havells/Tunablewarm white

PROVIDING AND FIXING MAIN ENTERANCE HAVING BASE OF PANNEL DASSA , CARVING ON 15CM THICK FACE STONE SUPPORTED BY STONE MASONARY OF (1:6 CEMENT SAND RATIO) ,ARCHES , LINTEL , STONE JAALI , PILLAR , TODIES ALL AS PER GIVEN DRAWINGS.

PROVIDING AND FIXING BARADARI ABOVE MAIN ENTERANCE GATE HAVING BASE OF PANNEL DASSA , SURAHIDAR PILLAR ,ARCHES , LINTEL ,GALAT , CHHAJJA ,DAAB STONE (KANI), KANGOORA , DOME KALANGI , TODIES ALL AS PER GIVEN DRAWINGS.

PROVIDING AND FIXING JAISALMER STYLE BIG CHHATRI HAVING BASE OF PANNEL DASSA , SURAHIDAR PILLAR ,ARCHES , LINTEL ,GALAT , CHHAJJA ,DAAB STONE (KANI), KANGOORA , DOME, KALANGI , TODIES ALL AS PER GIVEN DRAWINGS.

PROVIDING AND FIXING JAISALMER STYLE SMALL CHHATRI HAVING BASE OF PANNEL DASSA , SURAHIDAR PILLAR ,ARCHES , LINTEL ,GALAT , CHHAJJA ,DAAB STONE (KANI), KANGOORA , DOME, KALANGI , TODIES ALL AS PER GIVEN DRAWINGS.

jaisalmer stone gazebo size 12*10*12 feet pillar size 10"*10"*100".gazebo foundation of 2' depth covered by 3d panels according to design including sand stone flooring with base concrete1:2:4.roof slab of 2" thuickness and beam of 6"*10" 44 rft .as per engineer in charge

micro computer automatic motion censor glass door system (complete kit; 1motor with gear +1control panel +2 motion sensors+1 teeth belt+1 set door fixing accessories).10mm toughened glass with complete accessories and fitting charges .as per engineer in charge

Supply and planting following species best quality container grown healthy trees of 2 mt. min. height, well established & free from disease at site in 0.90 m dia holes, 1 m deep dug in the ground, mixing the soil with decayed farm yard/sludge manure, backfilling the hole watering etc as required. concarpus

ashoka tree

green fucaria

table palm

Euphorbla millii

Acacia senegal

moringa concanensis

Salvadora persica

Topihari golden & bottle brush

Tinospora cordiflia

Pergularia daemia

Crown -of -thorns

SUPPLY & fixing of BARE GALVANISED\prepainted iron (ppg) thickness .60mm metallic coating -Z 120 maX TENSILE STRENGTH : 245 -550 MPA MAX PAINT COATING: RMP,SMP,PVDF PAINT THICKNESS :18-22 MICRON TOP& 5-8 BOTTOM COATING STANDARD:JISG 3312, IS 1397-1993/227 roof of theatre (30*20)

HINDWARE URINAL SENSO ART - 60018 61 X 39 X 37 CMS (white)

HINDWARE U/C W/B ROUND STARLET 10052 DIA 49CMS (white) w3ash basin

cctv camera signals 4 pair 500 mhz tested with cross

4 mpb dome camera off make up

4 mp bullet camera off make cp

16 channel nvr make cp plus\honey well

hdd sata tb each off make wdd

32/40" led professional panel off

18u,u single sided horizontal cable

secure 8 portpoe switch 8+2

rj 45 connector

hdmi cable

camera installation charges

feruling n continuity testing of both

labelling of i\oat w\s end patch end

erection\dressing of patch cords

installation of patch panel

installation of rack with all accessories

installation of cable manager

coaxial cable laying

internal acrylic of singage with printing

SITC of Lift (G+1) as per following specification:- Capacity (Kgs)- 884Kg(Approx), 13 Person Speed (mps)- 1mps RISE(m)- 4.5m Stops- 2Stops with (All opening on the same side) Controller type - ACD3-MRL Drive- VF regenerative (closed loop) Power Supply- 400-415 Volts (3 phase AC) Opration - Full collective Operation Car Group - One car(Simplex) Machine- PM Gearless (Located in shaft on top of Guide rails) Traction Media- FlatCoated Steel Belt Car Finich- Rear Mid Panel- Stainless steel Honeycomp Rear Corner Panel- Stainless Steel Honeycomp Side Mid Panels- Stainless Steel Honeycomp Side Corner Panels- Stainless Steel Honeycomp Front Panels- Stainless Steel Honeycomp False Ceiling Type- CD-41 False Ceiling Finish - Stainless Steel -4 (Hairline) Ventilation - Cross Flow fan Hand Rails- Steel Power Painted Black Handrails on rear car panels Flooring - Vinyl Tiles Pit Depth- 1350 Overhead- 4000 Hoistway Dimensions (W*D-MM)- 2500mmW* 199MM D Car Dimensions (W*H*H-mm)- 1600mm W* 1350mmD* 2200mm D Car & Hoistway Door Type- Central Opening (CO) Door Door Opening (W*H-mm)- 900mmW* 200mm H Door Oprator- DC Door Operator COP - COP for stop<=12(950mm) in stainless steel #4 (Hairline) Car Position indicator- Monochrome LCD black Background & Blue font Dot matrix (LED) Scrolling Display Hall Fixture- 02000 flat type fixture Hall Fixture face plate - Stainless Steel #4 (Hairline) Hall Button Arrangement - LCD Monochrome Type Standard Features- Anti- nuisance Car call protection Independent Service (for Duplex only) Overload Device Overload Device Nudging Emergency Fireman's Service Emergency Car light unit InfraredCurtain Door Protection Door Time Protection Emergency Alam Buttom Extra Door time of lobby & Parking Door open/Close button Manual rescue operation Belt Inspection Drive Auto fan Cut off Options included - Automatic rescure device all work are executed as per direction of Engineering Incharge Make- Otis/Thyson/ Schindler Elevtor/Kone Elevator/PrimeKelwin

Providing & fixing of double leaf acoustic doors made using 75 mm thick seasoned hard wood hollow framing tilled with 75 mm x 32 kg/m3 density Ecouse fiber glass wool fixied with 8 mm GWP & Termite resistant ply wood on both sides finally pasted with veneer on both sides duly polished using PU spray Polish having automatic drop seal with neoprene seal consisting of peripheral approved neoprene jamp seals all around on 150 mm wide Sal chowkhat with small 150 mm x 150 mm glass window, with complete hardware including steel Panic bar lockhinges with ball bearings latches, lock 1500 mm long metal handles on both sides etc complete in all respect and as directed by the consultant. The Chowkhat will be finished with teak wood lipping on all sides duly polished All hardware fittings veneer and polish shade and finish will be as per consultants drawings & instractions. The polish shade and finish will be as per consultant And as instruction given by site encharge Engineer and as per enclosed drawing.

Providing and fixing flocked carpet flooring having a straight Nylon 6.6 pipe, fixed using flock adhesive to a backing of non woven fiberglass net on PVC backing having a thickness of 4 mm suatable commercial use roll width 2.0 m roll length 30 m, weight 1.8 kg/m2 Abrassion resistance to>1000 cycles as per EN 1307 annex F having very low slip restance Acoustical performance as per EN ISO 717-2 confirming to EN 14041, suitable for wet cleaning using wet vaccum cleaner duly pasted to the ready floor base as per on manufactures pepecifications. The shade & design of the carpet will be confirmed by the consultant and intruction given by site Engineer Incharge.

Supply, Installation, testing & commissioning of Tip Up Type Cinima Chair high back and headrest are Must be made From generous super-soft, deep cushioned foam and fibres, creating a superior seating position. chair operates without the need for electric motors, Width (Out to Out) - 60 CM Height - 101 CM Overall Depth - 64 CM Auto tipup Seat mechanism 14 gauge and 16 gauge with no disturbing noise All the metal parts will be black powder coated Fully upholstered Arms along with Foam backing and with CupHolder Piping in contrast color High Density Foam Seat. Back with high quality conjugated siliconized polyfill for excellent in comfort and best in slider class. Seat chase with super softy foam for sunkin feeling while seated for best comfort during long hours. High quality Nylon Nivar webbing in seat for best resilience. Colour selct by Engineer inchage Quoted price Mustbe include all related hardware and Acessorys Make :- Godrej, Wipro, Relaxin .as per engineer in charge

Supply and Installation of Woody wool Fabrico of black colours Kerf edge, Fabric wrapped wood fiber panels of size 600x2400x20mm having density 400Kgs/m3, installed by using H-spline against wall to perfect fit.Panels shall be backlined with acoustical infill of Echowool 10x25mm thick adhered to the wall using adhesive (surrounding wall of stage).as per engineer in charge

Wall Sides & Back - upto 2.00 m (Lower reach), Product: Woody Flute 27.19x2) + 25.11 ) x 2.00 Supply & installation of Woody Flutes, made of pinewood E1 grade, fiberboard, Melamine laminated finish, groove Flutes F16-2 - (2mm grove @16mm pitch) , tongue-groove edge for a seamless look, FR grade, of size 128x2440x20mm thick having base density 800Kg/m3, weight 12Kgs/m2 installed by using GI strut system.Framing The GI strut system includes GI Ceiling Section (CS 25) having thickness 0.45mm, length 3600mm, knurled web 40mm, depth 10mm and equal flanges 15mm is fastened vertically at every 600mm centers. Aluminium core Flute Acceseries (FA18) having thickness 0.5mm, length 2400mm, web 15mm & 27mm, depth 18mm and flanges of 7mm with suitable edge & centre brackets is then fixed perpendicular to the CS 25 with the help of fasteners at every 450mm centers. Woody Flutes of size 128x 2440x16mm in then fixed perpendicular to FA18 with suitable edge & centre clips. Expansion joints of 3mm at every 5mtrs bothways should be provided.Frame cavity insulation Panels shall be backlined with acoustical infill of Echo Wool 10x25mm thick adhered to the wall using adhesive.as per engineer in chargeFabric of width 1400mm is then aligned to the Stretch tracks by following the fabric thread line or pattern. The fabric is stretched and tucked into the Gripper tracks and secure into the locking jaws so that it will be smooth, free of wrinkles with the tucking tools. Note -minimum 50mm additional fabric is required for tucking hence maximum module wall fabric width would be 1300mm.as per engineer in charge

Wall Sides and Back - Above 2.00 m , Product: Stretch Insitu 40mm thick System (27.19x2) x 9.29) + (25.11x 6.80) Supply and installation of StretchInsitu Fabric, wall fabricsystembyusingof size 1400mm width,shallbestretchedbyusingwoodenbase15mmthick,30mmwideplywoodstrip,Grippers15mm(GP15)Tracks,25mmthick Woodywool board and 10 mm thick Echowool infill with requisite accessories & tools. Woodywool square edge magnesite bonded pinewood fiber panels of size 600x1200x25mm having density 400kg/m3, weight 7.20 kg is fixed over GI Frame work with suitable fasteners. Echowool 10x10mm thick adhered on Woodywool panel by using adhesive.Fabric of width 1400mm is then aligned to the Stretch tracks by following the fabric thread line or pattern. The fabric is stretched and tucked into the Gripper tracks and secure into the locking jaws so that it will be smooth, free of wrinkles with the tucking tools. Note -minimum 50mm additional fabric is required for tucking hence maximum module wall fabric width would be 1300mm.as per engineer in charge

Wood Mould as per design on Walls, Railing Supply and Installation of woodMould tiles sixe 600 x 600 mm on Stage wall.as per engineer in charge

Providing and Fixing wood Moulds Size 2 x 5 m, 8 to 30 mm thick as per the embosed design. as per engineer in charge

Providing and Fixing wood Moulds Size 2 x 4 m, 8 to 30 mm thick as per the embosed design. as per engineer in charge(final shape of finished item shall be same as per attached drawing.

wood Moulding at Doors 80 mm wide. as per engineer in charge

Supply and Installation of Softra Black square edge Glass fibre core ceiling tiles of size 595x595x15mm having density 100-120Kgs/ m3, weight 1.5-3.0kg/m2 which is suspended by using 1mm thick and 15mm wide pre coated metal T15 grid system.The T15 Grid system of 600x600mm module shall include wall angle with unequal flanges of size 14 & 20mm wide, length 3000mm, 0.43mm thick fixed along the perimeter of walls with the help of nylon sleeves and suitable fasteners at 300mm centers. Then suspend the Main Tee (MT15-L3.6) having flange width 15mm, height 32mm and length 3600mm from the soffit with help of soffit cleat and wire rod with leveling spring clip at 1200mm c/c. Cross Tee (CT15-L1.2) having flange width 15mm, height 32mm and length 1200mm is then interlocked into the pre-cut slots in the Main Tee at 600mm centers in the direction perpendicular to the Main Tee. Finally Cross Tee (CT15-L.6) having flange width 15mm, height 32mm and length 600mm are then interlocked into the pre cut slots in the 1200mm Cross Tee at 1200mm centers and in direction parallel to the Main Tee. Softra Tile square edge of size of size 595x595x15mm thick shall be placed into the grid size of 600x600mm. Ensure arrow marks behind Softra Tile are orianted in one direction to achieve uniform shade.. as per engineer in charge

Supply and installation of 12.5mm thick Gypfirt Lamina board of 3mm square perforations (minimum 13% of perforated area) backed with 50mm thick 1000GSM Echo wool Construction of Frame work Frame work shall consists of GI perimeter channels of size 0.55mm thick (having one flange of 20mm and another flange of 30mm) fixed along with perimeter of the beam or walls with the help of nylon sleeves and screws at 600mm c/c. Then suspend GI main channels of size 45 mm (0.9mm thick with 2 flanges of 15mm each) from the soffit at 1200mm c/c by using soffit angle of size 25mm x 10mm x 0.55mm thick fixed to true ceiling by using suitable fasteners. Cross channels of size 0.55mm thickness having knurled web of Cavity Filling Ceiling frame work shall be back lined by using Echowool having density of 1000 GSM and 50mm A layer of 12.5mm thickness Gyprift Lamina of size 1220 x 1830 mm having perforations of minimum of 13% is fixed on to frame work. Finishing Ensure that board is fixed in plumb level, screw fix gypsum plaster board to channel, cover screw with compound and sand the surface. Joints of Gyprift Lamina to be finished by using jointing tapes and compound.Final finishing is done with two coats of acrylic emulsion paint of approved colour as directed by engineer in charge

Supply and installation of wooden proscenium in front of stage Construction of frame work Proscenium frames are fabricated by using metal tubular section of 100 x 50 x 2mm thick fixed to form a square grid of size 600 x600mm. Proscenium width shall be minimum 5meters (walls) along the sides and minimum of 1.5mtrs drop from the false ceiling Frames are grouted to stage floor/wall by using suitable fasteners.Cavity Filling Boarding Proscenium frame is then covered with 12mm thick plywood from both sides and covered with 1mm thick laminate, finished with polish of approved shade.. as per engineer in charge

Stage Flooring - Cushion vinyl flooring of Beau Flor - Dynasty make from Belgium Supply and installation of Cushion vinyl flooring of Beau Flor -Dynasty make from Belgium on stage having fixed on raised MS framework finished with 18mm high density plywood system.Frame work shall be fabricated by using 50mm high x 50mm wide MS battens fixed on the stage floor at 600mm centres in both directions, by using suitable fasteners. Contractor to co-ordinate with AV vendor and decide final height to conceal stage floor boxes.Cavity Filling Resultant air gap between floor and plywood to be lined by using Aerofiber's Echo Wool having a density18mm thick high density plywood is then fixed to MS frame rigidly by using suitable fasteners and ensure proper level of the plywood surface and fix Beau Flor - Dynasty cushion vinyl flooring of 3.8mm thickness having density of 2200gsm/m3 and roll size 2mtrs x 20mtrs as per approved shade. of 1000 GSM and 25 mm thick Boarding Finishing

P/f of MS suspension grid providing and fixing MS angle rafters above acting area of stage at 1200x600mm centers, 2 x 40x40x4mm thick. MS angle runners & 25x12x12mm thick studs as MS spacers fixed @ 600mmc/c sandwiched between the MS angle runners so as to maintain 12mm gap between MS angle . The grid so formed to be suspended from bottom of roof structure by means of 35 x 5mm thick. MS flat suspenders, fixed with MS cleats & dash fasteners at RCC slab & nuts & bolts at 1200mm centers to the grid. Painting MS suspension grid & suspenders with 2 coats of redoxide primer and 2 or more coats of enamel paint of approved shade. . as per engineer in charge

SITC of MAIN CURTAIN made out of velvet curtain cloth with horizontal sliding arrangement complete with fixing curved rails, brackets, sliding arrangement & motorised operation complete with runners, master runners, pullies, 3mm steel wire rope, 1 HP motor (Crompton) 2nos. air breaker contactors (L&T/SIEMENS), 2nos. micro switches for auto stop, 3 nos push buttons for forward, reverse and stop positions. The curtain should be draped to half area when in closed position. Minimum overlap at centre should be 900mm and should be stitched in double gathering, with Main Frill. Make : Modern Stage Service / Stage Technologies / Waagner-Biro/Shiva Stage Light

SITC of CENTRE CURTAIN made out of glazed cotton cloth with horizontal sliding arrangement complete with fixing rails, brackets, sliding arrangement & motorised operation complete with runners, master runners, pullies, 3mm steel wire rope, 1 HP single phase motor (Crompton) 2nos. air breaker contactors (L&T/SIEMENS), 2nos. micro switches for auto stop, Dual 3 nos push buttons for forward, reverse and stop positions. The curtain should be draped to half area when in closed position. Minimum overlap at centre should be 900 mm and should be stitched in double gathering. Make : Modern Stage Service / Stage Technologies / Waagner-Biro/ Shiva Stage Light

SITC of REAR CURTAIN made out of glazed cotton cloth with horizontal sliding arrangement complete with fixing rails, brackets, sliding arrangement & motorised operation complete with runners, master runners, pullies, 3mm steel wire rope, 1 HP single phase motor (Crompton) 2nos. air breaker contactors (L&T/SIEMENS), 2nos. micro switches for auto stop, Dual 3 nos push buttons for forward, reverse and stop positions. The curtain should be draped to half area when in closed position. Minimum overlap at centre should be 900 mm and should be stitched in double gathering. Make : Make : Modern Stage Service / Stage Technologies / Waagner-Biro

SITC of Masking Legs (Wings) made out of 25X25mm MS square pipe with 2mm in thickness powder coated/Painted of size as per drawing/as under, provided with 1.5meter leg track with grid mount brackes made of 40X50X40mm C track, Pilotable 4-wheeled suspension trolley, Adjustable floor locking screw jacks with rubber grips, Make : Modern Stage Service / Stage Technologies / Waagner-Biro

SITC of Providing and fixing average frills made out of double gathering glazed cotton cloth to be installed above the stage on 40 mm dia dual barrel MS pipe duly powder coated/Painted with manual hoist system . Make : Modern Stage Service / Stage Technologies / Waagner-Biro/ Shiva Stage Light

SITC of CYCLORAMA CUM SCREEN :- Cyclorama Screen in Plastic Perforated /Plain Material. The screen to be fixed on tubular frame made out of 40mm dia MS pipe and Cross MS Pipe 25mm dia (custom). SIze 1400mm*6500mm Make of screen : Galalite / Dalite / Rosco/Shiva Stage Light

SITC of M.S. Pipe Ladders to be provided on sides of the Stage to be fixed on the GI pipe or top grid for fixing of side lights. Made of 50mm x 25mm M S pipe with cable tray . Size: - 0.6 m X 2.4 m Make : Modern Stage Service / Stage Technologies / Waagner-Biro/Shiva Stage Light

SITC of MS "C" track size of 40 x 50 x 40mm, 3mm thick with owal slot of 14 x 40mm at every 200mm, duly powder coated/painted with Matt black texture finish for suspending lighting grid hoist and other equipment for fulfilling all the lighting requirement for Stage Lighting as per drawing . Self- weight 3.3Kg per mtrs Make : Modern Stage Service / Stage Technologies / Waagner-Biro/Shiva Stage Light

SITC of Motorized winch to be used as onstage lighting bar/Cyclorama lighting bar made of 40NB dual barrel of 2 mm thickness along with 1.5HP 3PH AC motor with DC Brake Necessary pulley, guide pulleys GI wire rope of minimum 5mm in diameter constructed with 6 bundles of 19 strands with fiber core at center, winding drum Specially designed compact worm gear box Upper and lower limit controller Requisite cable retractor ensuring smooth movement of all the cable from C track to the Lighting Bar . Length as per drawings . Make : Modern Stage Service / Stage Technologies / Waagner-Biro/Shiva Stage Light

SITC of 750 / 575W Profile Spot Light with Voltage: 220v/50Hz, Lamp: 220v HPL 750W / 575W G9.5 Base, Color Temperature: 3200k, Optional Degree: 19°/26°/36°/50°, Weight: 6kg, Size: 53×26×28cm. Make: Modern Stage Service / Sholite / DTS / ADB / Claypaky/Shiva Stage Light

SITC of 1000W, 240 Volt, PAR Sealed Beam Light with CRC Sheet Metal and alluminium die casting, mat black color, yoke & clamp. Make: Modern Stage Service / Sholite / DTS / ADB / Claypaky/ Shiva Stage Light

SITC of 1000W Halogen Fresnel light consisting of 1000W Halogen Bipin T-11 lamp, 150mm dia imported Fresnel lens, Imported socket, bottom sliding knob, yoke, colour frame & suitable clamp. Make: Modern Stage Service / Sholite / DTS / ADB / Claypaky./ Shiva Stage Light

SITC of 280W Beam Moving Head with Input Voltage: AC110/240V, 50-60Hz, Lamp: 10R 280W, Power: 400W, Average Lifespan: 2000 H, Color Temperature: 8000K, Channel: 16CH, Pan: 540° (16bit), Tilt: 270° (16bit), Color: 14 colors + white, Gobo: 17 fixed gobos + white, Prism: rotation 8-face prism + frost + shake, Lens: high precision optical lens, Focus: 0-100% linear adjustment, Dimmer: 0-100% linear adjustment, Strobe: Double lens strobe (0-13 times/ second), Dimmer: 0%-100% linear adjustment, Beam angle: 0º-30º parallel beam angle, Control Mode: Standard DMX512, Master / slave mode, IP Rate: IP20. Make: Modern Stage Service / Sholite / DTS / ADB / Claypaky

SITC of LED PAR: 36 x 3W, RGB, 15º/30º/45º/60º LED PAR of IP20 rating, deliver 4200 Lumens. The fixture should have capability to work on standby mode, via DMX 512 or integrated sound – 2 light program. Make: Modern Stage Service / Sholite / DTS / ADB / Claypaky/ Shiva Stage Light

SITC of Lighting Controller - 96 Fixture Lighting Control Console, 2-banks 24 fader, 1-bank 48 fader mixing console, controls DMX and has also the capability to be used with MIDI protocol to allow real-time programs, controls 2x24 channels (single bank) or 48 channels, program 96 scenes or chases of 999 steps or a loop with a total of 23976 steps. Programs can be run automatically or by external or internal music input. It is also possible to control your lightshow by the built-in MIDI-interface to allow a real-time live-show to your music. 48 control channels, 24 chaser programs, 3 digit LCD display, MIDI in/out, Audio in, DMX invertible, DMX Out. Make : Modern Stage Service / Sholite / Signify / Zeroo88 / Avolite / ADB / Claypaky

SITC of RDM Compatible DMX Splitter 1 Inputs and 6 Optically isolated output for DMX network as per the technical specification as required. Make:- Modern Stage Service / Signify / Zeroo88 / Avolite / ADB / Claypaky/Shiva Stage Light

SITC of power points with FRLS 3 Core 2.5 SQMM Cable with ISI Mark per the technical specification on existing cable tray etc as required as required. Make:- Polycab / Havells / RR Kable

SITC of FRLS 7 Core 1.5 SQMM Cable with ISI Mark per the technical specification on existing cable tray as required. Make:- Polycab / Havells / RR Kable

SITC of FRLS 4 Core 4 SQMM Cable with ISI Mark per the technical specification on existing cable tray as required. Make:- Polycab / Havells / RR Kable

SITC of PVC Copper unarmoured flexible FRLS insulated multicore cable 1100V grade confirming to IS694 size 12cx2.5 sq mm. Make:- Polycab / Havells / RR Kable

SITC of FRLS PVC copper multistrand flexible cable 24 core x 0.5 sq.mm. Make:- Polycab / Havells / RR Kable

SITC of FR DMX signal Cable with CE Mark per the technical specification as required. Make:-Polyvab / Havells / RR Kable / Falcon / Beldon

SITC of die casted aluminium C - Clamp with rotatable spud with key lock as per the technical specification as required. Make:- Modern Stage Service / Arri / Desisti/Darbari

SITC of Safety bond with lock clip as per the technical specification as required. Make:- Modern Stage Service / Arri / Desisti/Darbari

SITC of MS lighting junction box with 10A 4 Way IEC socket of imported make CE Certified for direct points, Box should undergo through 7 tank process with various chemical treatment to keep them rust free duly powder coated with matt black texture finish for dimmable points along with the FC11 glands. Make :- Modern Stage Service / ABB / Hensal / Arri / Desisti / Darbari

SITC of MS lighting junction box with 16A CE socket of imported make for dimmer points, undergone through 7 tank process with various chemical treatment to keep them rust free duly powder coated with matt black texture finish for dimmable points along with the FC11 glands. Make :- Modern Stage Service / ABB / Hensal / Arri / Desisti / Darbari

SITC of 1 Way 5 Pin/3 Pin DMX Signal IN Socket in MS Fabricated enclosure with black epoxy polyester powder coated per the technical specification as required. Make :- Modern Stage Service / ABB / Hensal / Arri / Desisti / Darbari

SITC of MS Fabricated duly powder coated Recessed Wall Plate DMX loop box with DMX male/Female 500mm loop cord, undergone through 7 tank process with various chemical treatment to keep them rust free duly powder coated with Matt black texture finish for dimmable points along with the FC7 glands. Make :- Modern Stage Service / ABB / Hensal / Arri / Desisti/Darbari

SITC of MS sheet metal fabricated DMX junction box(Outbox) 7 tank process with various chemical treatments to keep them rust free duly powder coated with Matt black texture finish for dimmable points along with the FC7 glands. Make :- Modern Stage Service / ABB / Hensal / Arri / Desisti/Darbari

SITC of MS sheet metal fabricated power cable termination marshalling box duly 7 tank process with various chemical treatment to keep them rust free duly powder coated with Matt black texture finish for dimmable points along with the Brass glands. Make :- Modern Stage Service / ABB / Hensal / Arri / Desisti / Darbari

SITC of Auxiliary marshalling box made of fabricated Sheet 7 tank process with various chemical treatment to keep them rust free duly powder coated with Matt black texture finish for dimmable points along with the FC11&FC13 glands. and connectors to terminate the power and signal cables for the light bars and Teleclimber. Make:- Modern Stage Service / Legrand / ABB / Crompton / Indo / Darbari

SITC of 5 Pin XLR Male / Female cable mount connectors for DMX network as per the technical specification as required. Make:- Modern Stage Service / Neutric / Amphenol

SITC of 5 Pin XLR Termination Plug cable mount connectors for DMX network as per the technical specification as required. Make:- Modern Stage Service / Neutric / Amphenol

SITC of Following size of Perforated Hot/cold Dipped Galvanised Iron cable tray with lid with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. Make : Modern Stage Service / Mec / Premier / Support 75 mm width X 50 mm depth X 1.6 mm thickness

150 mm width X 50 mm depth X 1.6 mm thickness

SITC of Well designed and engineered compartmentalised power distribution center panel with necessary metering, outgoing feeders and incomer and emergency trip arrangement for IEC junction Boxes(Qty as per drawings) way MCB Panel panel mount internally wired for IEC points to control individual light points, Make:- Modern Stage Service / Stagecraft / Thomas Power Distribution center Panel (For complete system)

Motor Control Panel (For all Motors)

Remote Control Panel for Curtain Motors and scenary bars

SITC of Wall Plate MS sheet metal fabricated 2-way power junction box duly powder coated in black Matt texture finish and fitted with 2no 10amps IEC socket ON / OFF switch and FC11 gland. Make : Modern Stage Service / Legrand / ABB / Crompton / Indo / Effectron

SITC of Hardwares required for the system nd Black valcro tape for cable dressing as per the technical specification as required. Make :- Modern Stage Service / Legrand / ABB / Crompton / Indo / Effectron

SITC of Loop earthing of complete system with 4 sqmm copper wire as required. Modern Stage Service / Legrand / ABB / Crompton / Indo / Effectron

SITC of Horn-loaded three-way full-range cabinet with a continuous power handling of 600 watts in a compact, two-way BIAMPED design. It features a custom-built 2X12" (300mm) low-frequency driver and an 8" MF using a 50 mm voice coil and a 1" exit compression driver having a 44 mm voice coil mounted on a constant directivity 40˚ x40˚ horn. At 4 Ohm and sensitivity of 101/109 dB, it has a continuous/Peak SPL of 131/137 dB. With a frequency response to be 75hz ----20 kHz. The cabinet has flying hardware mounted on the sides and behind the loudspeaker cabinet and constructed from a 15/24 mm Baltic multi-laminate Birch it is covered in a highly weather-resistant paint, protected by a sturdy 16 gauge steel grille. , Make : CSC /Martin/L Acoustic /JBL

SITC of flying frames, Make : CSC

SITC of 1600-watt continuous power handling low-profile reflex-loaded Sub Woofer using a custom-built 2x18"(400mm) LF Driver with an industry-standard 4" sandwich cone voice coil. It has integrated hardware to mount the speaker on the ceiling. At 4 Ohm and a sensitivity of 102 dB, it has a continuous/Peak SPL of 132/138 dB. With a frequency response to be 35 Hz ----300 Hz (at plus-minus 3 dB), is constructed from a 15/24 mm Baltic multi-laminate Birch, protected & covered in a highly weather-resistant paint. It has a sturdy 16 gauge steel grille, flying points on the cabinet in addition to Non-Skid Rubber Feet. Make : CSC /Martin/L Acoustic/JBL

SITC of full range cabinet with a continuous power handling of 150 watts in a compact two-way passive full-range enclosure loaded with an 8" (200 mm) LF/ and a 1" compression driver mounted on a 60x40 horn. With a sensitivity of 94 dB, it has a continuous/Peak SPL of 115/121 dB and a Frequency response to be 80hz ----20 kHz. Depending on the application, the cabinet can be both mounted in a horizontal and vertical orientation. Constructed from a 15mm Baltic multi-laminate Birch, protected and covered in a highly weather-resistant paint, a sturdy 16 gauge steel grille, it has a mounting for a U clamp. Make : CSC /Martin/L Acoustic

SITC of High current Power amplifier using Linear power supply Class D Topography having a power rating of 2x 1200/1800 @ 4/2 ohms with a THD of less than .01%, the slew rate of 25V/uS and a damping factor > 1000 having a high pass filter, thermal, short circuit and under/over-voltage protection. Stable into mismatched loads, Input, and link using XLR connectors, Output Speakon, indicators on the front panel indicate Signal/ limit and power/ fault. Stereo and parallel switch. And It is in 2U, weight 16kgs. Can withstand voltages up to 440 v. Make : CSC /Martin/L Acoustic

SITC of High current Linear power supply power amplifier in Class D Topography having a power rating of 2x 1800/2400 @ 4/2 ohms with a THD of less than .01%, the slew rate of 25V/uS, and a damping factor > 1000 having a high pass filter, thermal, short circuit and under/over-voltage protection. Stable into mismatched loads, Input, and link using XLR connectors, Output Speakon, indicators on the front panel indicate Signal/ limit and power/ fault. Stereo and parallel switch. And It is in 2U, weighing 28kgsCan withstand voltages up to 440 v. Make : CSC /Martin/L Acoustic

SITC of Linear power supply power amplifier in Class D Topography having a power rating of 4x 500/600 @ 4/2 ohms with a THD of less than .5%, > 500 with thermal, short circuit, and over-voltage protection. Input and Output use Euro block terminals. Bridge, Stereo, Parallel switch. Indicators on the front panel signal/ limit and power/ fault Stable into mismatched loads. Chassis 2U, Make : CSC /Martin/L Acoustic

SITC of 12 IN 12 OUT DSP, Make : CSC /Martin/L Acoustic

SITC of High-Definition 7.1 Dolby DigitalSound Processor , compataible with Dolby Digital EX, Dolby Digital Plus, Dolby TrueHD, DTS, DTS-ES Matrix, DTS-ES Discrete, DTS 96/24, DTS-HD Master Audio, PCM Multi-Channel , HDMI OUT (1) HDMI . Make : Crestron / BSS / Kramer

SITC of Audio mixing console of 24 total inputs mixing console with Effects, Mid-sweep 3-band mono channel EQ, 4-band stereo channel EQ, 14 buses for flexible signal routing: main stereo bus, four group buses, six auxiliary buses, and send buses for the two internal effect processors etc. Make : Yamaha /Allen Heath/ Soundcraft.

SITC of UHF Wireless Handheld Microphone System, Receiver: Frequency range 506 - 530 MHz, 668 - 692 MHz, Switching bandwidth 18 MHz, SN ratio >100 dB, T.H.D. < 0.5% at 1 kHz, Transmitter: Transducer type: Dynamic, Polar pattern: Supercardioid etc. Make : AKG / Beyerdynamic/ Sennheiser / Audio technica .

SITC of UHF Wireless Lapel Microphone System, Receiver: Frequency range 506 - 530 MHz, 668 - 692 MHz, Switching bandwidth 18 MHz, SN ratio >100 dB, T.H.D. < 0.5% at 1 kHz, Modulation FM, Frequency response 50 Hz - 18,000 Hz etc. Make : AKG / Beyerdynamic/ Sennheiser / Audio technica .

SITC of Dynamic, Vocal / Instrument Wired Handheld Microphone, super cardioid polar, 50-16,000Hz, 100-14,000Hz (1m). Make : AKG / Beyerdynamic/ Sennheiser / Audio technica .

SITC of Microphone Stand , Type Floor Stand , Height 920-1500 mm , Base Dia minimum 230 mm. Make : Bosch / Ahuja /GS.

SITC of Gooseneck Podium Microphone, complete with installation as per the site requirement. With on/off base switch. Make: AKG / Beyerdynamic/ Sennheiser / Audio technica .

SITC of 36U Equipment Rack complete with power strip, cooling fan, back and front door (lockable) alongwith equipment rack tray & wheels. Make: AKG / Beyerdynamic/ Sennheiser / Audio technica .

SITC of Speaker Cable, 14 AWG stranded (19x27) ETP high-conductivity copper conductors, PVC insulation, parallel: (1) tinned, (1) bare etc. Make: AKG / Beyerdynamic/ Sennheiser / Audio technica .

SITC of Microphone Cable ( 32 core snake cable ) for various microphone inputs from control room till the stage. Make: AKG / Beyerdynamic/ Sennheiser / Audio technica .

SITC of Microphone Cable 23/0.76 ATC PVC Sheathed . Make: AKG / Beyerdynamic/ Sennheiser / Audio technica .

SITC of Floor Junction Box with XLR Connector. Make: AKG / Beyerdynamic/ Sennheiser / Audio technica .

SITC of Laser Based Digital Projection System with Native Resolution of Ultra HD 4K (3,840 x 2,160) ,Aspect Ratio 16:9 , Brightness Minimum 10,000 ANSI Lumens , Contrast Ratio Minimum 100000:1 , Technology DLP , Laser liftime 20,000 hours , Inputs HDMI v 2.0 x 2 ports , LAN Control x 1 port ,HDBaseT x 1 port , Power Supply 90 ~ 254V / 50 ~ 60 Hz & Ceiling / Wall Mounting Hardware. Make : Christie / Barco / Vivitek / Epson .

SITC of Long Throw Projection Zoom Lens to project desired size from ( approx. throw required 3 - 4 :1) and as per the specifications , complete as required. Make : Barco / Vivitek / Epson

SITC of Motorised Projection screen 6000 mm (w) x 3390 mm(h) with white Matt fabric, Seamless surface, 3 Step locking position Complete with LVC for Control through touch panel, as per the specifications, complete as required. Make : Draper / Dallite / Harkness.

Supply, Installation, Testing & commissioning of AV Over IP Scaling Multimedia Encoder, Should have 1 HDMI connector at input with 4K (4096 X 2160) @ 60Hz (4:2:0). Should have 1 unbalanced stereo audio connector, 1 RS232, 1 IR Tx & 1IR Rx , 1USB type B connector. Should support (RTSP) real–time 4K60 4:2:0 video/audio/RS–232/IR/USB over standard 1G network. Should support HDCP 2.2. Should have HDMI embedded audio Support - PCM 2, 5.1, 7.1 Channel, Dolby Digital 5.1 Channel, Dolby Digital Plus, Dolby Digital True–HD, DTS 5.1 Channel, DTS–ES, DTS–HD High Resolution, DTS–HD Master Audio Should support Scalable one to many/many to many/video wall/KVM–over IP media distribution Shouldsupport video wall 1 to 256 screens. Should support Built in scaling and cropping for flexible display of source content on the decoder output Should have video encoding compression standard JPEG 2000 Should have audio encoding compression standard (analog in/out) AAC–LC Should support Power — PoE or external power supply Should have Reset button, up and down channel buttons, channel 7–segment display, status, Link and ON LEDs Should be controllable via Web UI, API, command for third party control system support. Should be CE and ISO 9001:2008 compliance Extra component or equipment may be added to match the complete specs.

Supply, Installation, Testing & commissioning of AV Over IP Scaling Multimedia Decoder, Should have 1 HDMI connector at output with 4K@60Hz (4:2:0). Should have 2 left and right unbalanced stereo audio on RCA connectors, 1 RS232, 1 IR Tx & 1IR Rx, 2 USB type A connector, 1 Ethernet on an RJ–45 connector & 1 RJ-45 connector for daisy–chain LAN. Should support (RTSP) real–time 4K60 4:2:0 video / audio / RS–232/IR/USB over standard 1G network. Should support HDCP 2.2. Should have HDMI embedded audio Support - PCM 2, 5.1, 7.1 Channel, Dolby Digital 5.1 Channel, Dolby Digital Plus, Dolby Digital True–HD, DTS 5.1 Channel, DTS–ES, DTS–HD High Resolution, DTS–HD Master Audio Should support Scalable one to many/many to many/video wall/KVM–over IP media distribution Should support video wall 1 to 256 screens. Should support Built in scaling and cropping for flexible display of source content Should have video encoding compression standard JPEG 2000 Should have audio encoding compression standard (analog in/out) AAC–LC Should support Power — PoE or external power supply Should have Reset button, up and down channel buttons, channel 7–segment display, status, Link and ON LEDs Should be controllable via Web UI, API, command for third party control system support. Should be CE and ISO 9001:2008 compliance Extra component or equipment may be added to match the complete specs.

Supply, Installation, Testing & commissioning of Network Switch with 12 ports , L3 manage , Switching capacity : 12.8 Gbps , Forwarding performance (64-byte packet size) 9.52 Mpps , Secure Shell (SSH), RADIUS, TACACS .

Supply, installation, testing & commissioning of PTZ ,Camera with HD Resolution Real High Definition Image with 1/2.3 or 1/2.8 inch or better, high quality HD CMOS sensor , 1920 x 1080 super high quality video ,20 x or more zoom with 12x or more digital zoom, Pan Range: 170deg or more With HD output interface for video & RS 232/ RS 422 for controls 10 or more preset position

Supply, installation, testing & commissioning of Joystics control for the above mentioned cameras with control capacity upto 4 nos. cameras , PAN / Tilt / Zoom feature.

Supply, Installation, Testing & commissioning of Cable Cubby with pneumatic movement and mechanical latching mechanism, Compact size with rectangular bezel, Top surface in black anodized finishes, One CAT 6 RJ-45 network/Data/Phone connectors, One unswitched AC outlet, One Data input on HD 15 Connector, One input on HDMI , One input for Audio on 3.5mm Jack.

Supply, Installation, Testing & commissioning of Data Presenter with Simultaneous Wired and Wireless Presentation and Collaboration Solution Wireless presentation device allows users with laptops or mobile to connect and present, HDMI input to connect a source with HDMI directly, 1 HDMI & 1 Mini DP/VGA output, one Gigabit LAN Ethernet port, audio de-embedding feature with one 3.5mm mini jack line out, Wireless Connection for up to 252 user devices, present minimum 4 users laptops or handheld devices on a single display at a time, capable of replicating any iOS device without any required app/device, 4 nos. of USB3.0 port for connecting peripheral devices like keyboard & mouse, share uninterrupted HD video of 1080p @ 60 FPS, feature to stop someone else from presenting to enable uninterrupted presentation, an audio de-embedding feature, annotation & white board feature on both wired & wireless source connected, DHCP support, inbuilt/external Wi-Fi, feature to call the output view of the wireless presenter on any of the connected devices for viewing or annotation, file sharing option for all participants, minimum 32GB (SSD) inbuilt memory, file viewing/downloading option from inbuilt memory, Powerful security features: user authentication, 1024–bit encryption, dynamic room code, Certification: CE, ISO 9001, ISO 14001, OHSAS 18001 Extra component or equipment maybe added to match the complete specs.

Supply , Installation , Testing & Commissioning of 4k Blue ray Player , MEDIA COMPATIBILITY: BLUE RAY, DivX, CD-R/-RW/ DVD +R/+RW/-R/-RW, CD-R/R Playback,DVD+R/+RW, DVD+R Dual Layer.

Supply , Installation , Testing & Commissioning of Wall & Table Mount PoE Touch Panel have 10” or more IPS color screen. Should have minimum 1280 x 800 resolution, brightness 4000cd/m2, contrast ratio 800:1, 16:10 aspect ratio Should have inbuilt Wi-Fi, 802.11 b/g/n/ac, Bluetooth 4.0 Should have capacitive touch technology. Should support Multitouch. CPU performance : 1.6GHz Quad Core, GPU, 2GB RAM, 16GB ROM Should be able to decode video format HEVC/H.265, H.264, H.263, MPEG–1/2/4, VC–1, VP6/8, RV8/9/10, AVS, MVC, Sorenson Spark, M–JPEG Should be able to encode/stream video format H.264, MVC, VP8, M–JPEG Should have front 2MP camera, HD 720p. Should have Ethernet port 10/100/1000Mbps PoE LAN. Should have inbuilt mic and speaker. Should be provided with table mount & wall mount kit. Secured Operation - Highly secured operation of applications using password protection, hidden control buttons and more. Red LED alert when camera is active. should be possible with Customized GUI using same OEM GUI Software. should support native integration of same OEM enterprise management software. Certification: CE, FCC, ROHS, REACH, ISO 9001, ISO 14001, OHSAS 18001 Extra component or equipment may be added to match the complete specs

Supply , Installation , Testing & Commissioning of Control system have minimum 8 bidirectional RS232, 8 IR, 8 Relays and 8 GP/IO and 1 Ethernet port to control all the devices in the room. Should have inbuilt or external IR sensor/learner to learn IR commands The compatible relay controller to control the Projector screen up down should be supplied as a package (may be from same OEM of controller or different). Should have inbuilt processing power and internal storage to store and process the control program. Should be compatible with any (IOS/Android) wireless or wired Touch screen of any size. Additional ports if required can be added with minimum hassle. Should have the flexibility to add as many user interfaces as required. Should have embedded webpage for control port settings. Should have Status LED to check for Control/Connection status. It should have minimum 5 license each included for both iOS & Android application Certification: CE, ISO 9001, ISO 14001, OHSAS 18001. Extra component or equipment maybe added to match the complete specs.

Supply,Installation,Testing & Commissioning of HD recording & Streaming processor, supporting H.264, with recording of minimum 500 gb , device with Video Input , HDMI x4, Supported Video Input Resolution 1080p 60 , Video Output , HDMI 1.4x1 , SDI loopthrough x1 , Audio Input RCA L/R x1, XLR x2 , Streaming Protocols , TS over UDP unicast & multicast , RTSP over HTTP/TCP/UDP , RTMP/RTMPS , SRT over UDP HLS , ecording File Format , MP4, MOV Storage , SSD/HDD x1 .

Supply installation Testing & commissioning of HDMI Cables with connectors at both ends. Size 1.8 mtr.

Supply installation Testing & commissioning of HDMI Cables with connectors at both ends. Size 5 mtr.

Supply,Installation,Testing & Commissioning of Shielded Twisted Pair Cable , Conductor Metal: Solid Bare Copper with 23 AWG Color Code: Blue/ Grey ( or any combination) , Jacket Material: PVC UL94V-0 .

Supply Installation Testing & Commissioning of Speaker Cable, 14 AWG stranded (19x27) ETP high-conductivity copper conductors, PVC insulation, parallel: (1) tinned, (1) bare etc.

Supply,Installation,Testing & Commissioning of Shielded Twisted Pair Cable , Conductor Metal: Solid Bare Copper with 23 AWG Color Code: Blue/ Grey ( or any combination) , Jacket Material: PVC UL94V-0 .

Percentage BoQ

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

Earth work in excavation in foundation, trenches etc. Includingdressing of sides and ramming of bottoms, including getting out theexcavated material, refilling after laying pipe/ foundation anddisposal of surplus excavated material at a lead upto 50m suitablesite as per direction of Engineer for following depths, below naturalground / Road top level. In all types soils/ saturated soil such as moorum, sand, sandy silt, clay, black cotton soil, kankar, etc.

In ordinary rock.-Depth upto 1.5m (boundary wall)

In ordinary rock.- 3.0 m to upto 4.5 mt

Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. pcc 1:4:8

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).

Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation , footings, strap beam, raft , bases of columns etc. Upto plinth level.

Providing and laying in position cement concrete of specified gradeexcluding the cost of centring and shuttering - All work upto plinth level :1:1:2 (1 Cement : 1 coarse sand : 2 graded stone aggregate 20 mm nominal size) (As per design mix)

Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : new civil work Columns, pillars, posts and struts etc.

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15o landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto two stories excluding the cost of centring, shuttering, finishing and reinforcement 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size new civil work Columns, pillars, posts and struts etc.

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto two stories excluding the cost of centring, shuttering, finishing and vb M-20 Grade Concrete (1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) -As per design mix slab

Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. Thermo-mechanically Treated bars (Conforming of relevent IS code) tata,sail,vizac,krishana.as per director of engineer in charge.

Random rubble masonry with hard stone in foundation and plinth : Cement mortar 1:3 (1 cement : 3 coarse sand)

coursed rubble masonry with hard stone (first or second sort) in superstructure above plinth level and upto two stories. boundary wall

Pointing on tile brick work with cement mortar 1:3 (1 cement :3 fine Flush/ Ruled/ Struck or weathered pointing

White sand stone - Exposed face machine cut and table rubbed withrough backing. 70 MM THICK

Supplying and fixing ashlar coping ordinary 7 to 10 cm. thick 2-line dressed (normal length of single piece not less than 0.90m) (a) White Ashlar

Supplying and fixing in wall jaisalmer stone machine cut stone shelves, Tands & Sills in cement mortar 1 :3 with machine cut edges both sides.( 30 MM THICK ) Amphitheater

Brick work with modular fly ash lime bricks (FALG Bricks) conforming to IS:12894-2002, class designation 100 average compressive strength in super structure above plinth level upto two stories in :Cement mortar 1:6 (1 cement : 6 Coarse sand)

Brick work with modular fly ash lime bricks (FALG Bricks) conforming to IS:12894-2002, class designation 100 average compressive strength in super structure above plinth level upto two stories in :Cement mortar 1:6 (1 cement : 6 Coarse sand) reamining civil work

Surface dressing of the ground including removing vegetation and inequalities not exceeding 15cm deep and disposal of rubbish lead upto 50mtr. and lift upto 1.5Mtr.

Providing and laying lean cement concrete 1:4:8 in Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonnes vibratory roller, finishing and curing complete as per clause 601, 112 of MoRT&H specification including all material, labour, machinery, lighting, guarding and maintenance of diversion.

Marble stone flooring table rubbed, 18-20 mm thick over 20 mm (Av.) thick base of CM 1:4 (1-Cement:4-coarse sand) jointing with white cement mortar 1:2 (1-White cement:2-marble dust) with pigment to match the shade of the marble slab including grinding rubbing and polishing complete.above3601 cm square. ITALIAN MARBLE as directed by engineer in charge

Providing and laying in position cement concrete including curing compaction etc . Complete in specified grade excluding the cost of centering and shuttering. All work up to plinth level using crusher broken aggregate1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

P & F 1st qualityVitrified Porcelain Polished tiles on floor, skirting and steps etc.in different sizes (thickness to be specified by manufactuer) with water absortion less than 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1 : 4 including grounting the joints with white cement and matching pigment etc complete.

P & F 1st qualityVitrified Porcelain Polished tiles on floor, skirting and steps etc.in different sizes (thickness to be specified by manufactuer) with water absortion less than 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1 : 4 including grounting the joints with white cement and matching pigment etc complete. Size 800mm X 800 mm

Providing and fixing Ist quality MAT finished ceremic tile size 300x300mm confirming to IS : 13753 coloured tile expect white, grey, ivory, fume red brown in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry including nicely finished joints using water proof joint filler power (Untile or Roffe make) and finishing with flush pointing in white cement mixed with pigment to match the shade of tile complete (excluding the cost of cement plaster).

kotastone slab flooring 25 mm thick over 20 mm thick base laid over andjointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar ( 1:4) ( 1 cement : 4 corase sand)

Providing and fixing Ist quality MAT finished ceremic tile size 300x300mm confirming to IS : 13753 coloured tile expect white, grey, ivory, fume red brown in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry including nicely finished joints using water proof joint filler power (Untile or Roffe make) and finishing with flush pointing in white cement mixed with pigment to match the shade of tile complete (excluding the cost of cement plaster).

Flooring with Cobble stone of approx. Size 125x125x75 mm (thick) laid on 25 mm average thick cement mortar 1:3

Cement plastering including T&P, scaffolding, material and complete labpour, including cost of water, curing, racking of joints etc. with 20 mm cement plaster of mix : 1:6 (1 cement : 6 fine/ coarse sand)

add extra height more than 3.0 mt

6 mm cement plaster to ceiling of mix 1:3 ( 1 cement : 3 fine sand) new civil work

Cement plastering including T&P, scaffolding, material and complete labour, including cost of water, curing, racking of joints etc. with 20 mm cement plaster of mix 1:6 (1 cement : 6 fine/ coarse sand)

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work

Providing and fixing anodized aluminium work (Anodizing to be got done from approved Anodizer) for doors, windows ventilators and partition with extruded built up standard tubular and other sections of approved make conforming to IS : 733 and IS 1285 anodised transparent and dyed to required shade according to IS : 1868. (Minimum anodic coating of grade AC 15), fixed with rowel plugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gap at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth rust free straight, mitred and jointed mechaincally wherever required including cleat angle Aluminium snap beading for glazing /panelling , C.P. brass/ stainless steel screws, AI. Tower bolt & AI handle & Al. Aldrop etc. all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and panelling to be paid for separtely). For shutters of openable doors, windows & ventilators including providing & fixing hinges / rollers etc. and making provisiion for fixing of fittings wherver required (lockes shall be paid for separately).

Providing and fixing glazing in aluminium door, window, ventilator shutter and partition etc with PVC/Neoprene gasket etc complete as per the Architectural drawings and the direction of Engineer in charge ( cost of aluminium snap beading shall be paid in basic item)With glass panes of 5.5 mm thickness (weight not less then 13.75 kg/sqm) as per IS:2835 make only saint gobain new civil work as item no 45 windows qty

Steel work welded in built up section/framed work including cuting hositing , fixing, & position and applying apriming coat of approvaed steel primer using strucutreal steel etc. as gratings, frame , gurad rail, ladder , railing , brackets, etc.

Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, for doors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge.With stainless steel cover plate

Providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.

Providing and laying 20 to 25 mm size glazed tiles pieces for rooof treatment having colour and shade as approved by the Engineer incharge over 25 mm thick layer of cement mortar mix 1:4 with application of cement slurry including finishing of joints with ordinary cement and curing etc. complete in all respect. Washing with acid.

Providing & fixing door, window, chowkhats and other frames, including antitermite treatment, M.S. flat, hold fasts of size 250 x 40 x 3mm fixed with M.S. bolt 5mm dia 50mm long duly embedded in cement concrete M-15 grade :Sal wood

Structural steel work in single section fixed with or without connecting plate including cutting, hoisting, fixing in position and connecting plate including cutting, hoisting, fixing in position and steps on roof lift portion

Providing and fixing GI wire gauge of average width of aperture 1.56mm with wire of 0.45mm to existing steel door, window shutter frames with necessary M.S. strip beading 20x3mm with suitable screw at not exceeding 150mm distance etc. complete.

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-incharge. In cement mortar

Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level.1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).

Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesin in glue both sides including approved ISI marked Stainless Steel butt hinges fittings with necessary screws complete as per annexure 'A' :35 mm thickDecorative teak veneer both side

Supplying & fixing of M.S. louvered ventilators made out of 65x40mm hollow metal pressed section 1.25 mm thick sheet and louver 60 mm wide, 1.25 mm thick at angle of joints mitred and flush welded with suitable steel lugs etc. complete including applying priming coat of red oxide paint.

Diluting and injection Chloropyrifos Emulsifiable concentrate 20% with 1% concentration for PRE-CONSTRUCTIONAL Anti termite treatment as per IS 6313 part III as amended from time to time and creating a continuous chemical barrier under and around the column pits, wall trenches, basement excavation, top surface of plinth filling,junction of wall and floor along the external perimeter of building expansion joints, over the top surface of consolidated earth of which approach is to be laid surrounding of pipes and conduits etc. complete as per specification (Plinth floor area only shall be measured for payment and excluding the cost of chemical emulsion).

Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Upto 5mm depth and 5 mm width

Providing and fixing stainless steel cramps of required size and shape for anchoring stone wall lining to the backing or securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand) including making the necessary chases in stone and holes in walls wherever required.

Construction of embankment with approved material obtained from borrow pit with all lifts and leads, transporting to site, spreading, grading to required slope and compacting by vibratory roller 8-10 tonne to meet requirement of table 300-2 including cost of compensation for earth taken from private land complete as per MoRT&H specification clause 305. (Lead taken upto 5 km) internal road

Providing laying, spreading and compacting stone aggregates of specific sizes as per Table 400-7 to Water Bound Macadam specification including spreading in uniform thickness; hand packing, rolling with power roller 8-10 tonnes, in stages to proper grade and camber, applying and brooming requisite type of screening (Table 400-8) binding materials to fill up the interstices of coarse aggregates, watering (with water browser) and compacting to required density, making necessary earthen bund to protect edges as per clause 404 of MoRT&H specification including all material, labour, machinery, lighting, guarding and maintenance of diversion. Crusher broken - Grade-II (63-45mm)

Providing laying, spreading and compacting stone aggregates of specific sizes as per Table 400-7 to Water Bound Macadam specification including spreading in uniform thickness; hand packing, rolling with power roller 8-10 tonnes, in stages to proper grade and camber, applying and brooming requisite type of screening (Table camber, applying and brooming requisite type of screening (Table 400-8) binding materials to fill up the interstices of coarse aggregates, watering (with water browser) and compacting to required density, making necessary earthen bund to protect edges as per clause 404 of MoRT&H specification including all material, labour, machinery, lighting, guarding and maintenance of diversion diversion.Crusher broken - Grade-III (53-22.4mm)

Providing, laying, spreading (with paver finisher only) and compacting wet mix macadam (WMM) base course comprising of graded stone aggregate and granular material conforming to MORT&H specifications (Table 400-II) in layers of equal compacted thickness each consolidated, including pre-mixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tippers to site, laying in uniform layers in base course on a well prepared sub-base/ base course and compacting with power vibratory-roller to achieve the desired density complete as per MoRT&H specification clause - 406 including all material, labour, machinery, lighting, guarding and maintenance of diversion. cum

Providing and laying bituminous macadam in 50/75 mm compacted thickness on prepared surface with specified graded crushed stone aggregates as per Table 500-4, Grading-II for base/ binding course, loading of aggregate with F.E. loader, heating and mixing of stone aggregate and bitumen in computerised hot mix plant, transported to site by tippers to paver, laid over a previously prepared surface with paver finisher fitted with electronic sensing device to the required grade, level and alignment and rolling with power roller and vibratory compactor as per clauses 501.6 and 501.7 to achieve the desired compaction complete as per clause 504 of MoRT&H specification and including all material, labour, machinery, lighting, guarding and maintenance of diversion but excluding cost of primer/ tack coat. With CRMB 60 grade @ 3.4% (percentage by weight of total mix)

Providing and applying primer coat over prepared surface of granular base with bitumen emulsion as per IS : 8887 and approved quality @ 0.6 kg/sqm with the help of spray set fitted on bitumen Container (boiler) after cleaning the surface including removing of binding material and other foreign matter with wire brushes and small picks, sweeping with brooms or soft brushes and finally dusting with old gunny bags and compressed air to receive bituminous treatment complete as per clause 502 of MoRT&H specification including all material, labour, machinery, lighting, guarding and maintenance of diversion.

Providing and applying tack coat on the prepared surface with bitumen emulsion as per IS: 8887 and approved quality @ 0.2 kg/sqm with the help of spray set fitted on bitumen Container (boiler) after cleaning the surface with brooms or soft brushes and finally dusting with old gunny bags and compressed air to receive bituminous treatment complete as per clause 502 of MoRT&H specification including all material, labour, machinery, lighting, guarding and maintenance of diversion.

Providing and laying open graded premix carpet 20mm thick (compacted), on prepared surface in a single course as wearing course, composed of specified graded crushed stone aggregate as per Table 500-23, premixed with bituminous binder @ 14.60 kg/ 10sqm (including cost of anti-stripping compound wherever required), including loading of material with F.E. loader, hot mixing of stone aggregate and bitumen in computerised hot mix plant, transporting the mixed material by tippers to paver and laying with paver finisher fitted with electronic sensor control to the required level and grade, compacting smooth wheeled roller 8-10 tonne capacity and finishing to required level to achieve the desired density as per clause 511 of MoRT&H specification including all material, labour, machinery, lighting, guarding and maintenance of diversion but excluding cost of tack coat/ seal coat. With bitumen of grade CRMB-60

Providing and laying premixed seal coat using hot mix plant and paver finisher with aggregate of 6.7mm size defined as 100% passing through 11.20mm sieve and retain on 2.36mm sieve with 0.09 cum per 10 sqm premix with bitumen binder @ 4.5% and rolling with power roller 8-10 tonne complete as per clause 513 of MoRT&H specification including all material, labour, machinery, lighting, guarding and maintenance of diversion. With bitumen of grade CRMB-60

Providing and laying marking of center line and stop line etc with hot thermoplastic compound 2.5 mm thick on road/ plain surface, including reflectorising glass beads @ 250 gms per sqm area with special applicator machine, as per IRC:35 including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control involved. The finished surface to be level, uniform and free from streaks and holes as per clause 803 of MoRT&H Specification including all material, labour, machinery, lighting, guarding and maintenance of diversion.

Providing and erecting direction and place identification retroreflectorised sign as per IRC :67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting 2 mm thick framed to angle iron 40x40x5mm with area exceeding 0.9 sqm supported on two nos mild steel angle iron post 75 mm x 75 mm x 6 mm, firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing including all material, labour.

Providing and erecting overhead signs with retro reflective Type IV sign plate fixed on angle iron frame with vertical and lateral clearance given in clause 802.2 and 802.3 and installed as per clause 802.7 over a designed support system of galvanised steel trestles and trusses of sections and type as per structural design requirements and approved plans. 10.13.1 Truss and Vertical Support

Providing & laying interlocking terrzo cloured block plastic moulded.80 mm thickness having min. crushing strangth 40 N/mm2 laid over 40 mm thick river sand bed complete as per drawing and approved by Engineer In Charge , Complete with all respect .

Carriage of materials by manual labour including loading, unloading and stacking for lead less than 0.5 Km rear portion area having debris

Filling in plinth with river sand under floors including watering ramming consolidating and dressing complete including cost of sand. amphitheatre area

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level 1:1.5:3 (1 Cement : 1.5 fine / coarse snad : 3 graded stone aggregate 20 mm nominal size) nala in new amphitheatre

Providing and fixing in position precast R.C.C. manhole cover and frame of required shape and approved quality Square shape 450mm internal dimension

Spreading of sludge farm yard manure or/ and good earth in required thickness (cost of sludge, farm- yard man ure or/and good earth to be paid for separately)

Supply and planting following species best quality container grown healthy trees of 2 mt. min. height, well established & free from disease at site in 0.90 m dia holes, 1 m deep dug in the ground, mixing the soil with decayed farm yard/sludge manure, backfilling the hole watering etc as required. Plumeria alba ( Champa)

Neem(Azadirachta indica)

Bougain villea

fostal palm

Bottle Brush(Callistemon Lanciolatous)

Gulmohar(Delonix regia)

Rhaphis excelsa with 3-4 suckers ( Lady Palm)

Phonenix sylvertris ( Date Palm)

Providing and fixing 10 mm dia M S pipe drainage arrangement for Sprinkler Headers including stop valve with a maximum Pipe length of 5 Mtr.

Supplying and fixing of Electric Flow switch for sprinkler system annunciation

Providing and fixing MS iron tree guard 60 cm dia and 2 metre high above ground level formed of 4 Nos (25 x 6 mm) and 8 Nos (25 x 3mm) vertical MS riveted to 3 Nos (25 x 6 mm) iron rings in two halves, bolted together with 8 mm dia and 30 mm long bolts including painting two coats with paint of approved brand over a coat of priming, complete in all respects.

Maintenance of lawns or Turfing of slopes (rough grassing) for a period of one year including watering etc. sqm for

Maintenance of Plants ( other than Road side Plantation) -Complete maintenance of plants with watering for 12 months including weeding, hoeing, watering, pruning application of good earth, manure, insecticides, fungicides & fertilizers , security of plants disposal of garden rubbish from the premises to the approved municipal dumping ground replacing casualty of plants occurred due to any reason) by healthy plants

Maintenance of Hedge for 3 year

150 mm diameter Submersible pump shall have following HP Rating, phase, Head, minimum Discharge respectively. 7.5 HP, 3-Ø, (65-135)Mtr, (240-115)LPM

P & F Squatting Pan (Indian type) white glazed vitreous China Ist quality W.C. Pan (IS:2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor (excluding the pair of foot rest). 580 MM SIZE

P & F Automaic Flushing Cistern of first quality (IS: 774 mark) of approved make fitting siphon with coppre tube, C.I. brackets complete including cutting and making good the wall.

P & F WVC wash basin (Ist quality, I.S.: 2556 Mark) of approved make with C.I. brackets duly painted 1 No 15 mm C.P. pillar cock (I.S. : 8934 Mark) & 32 mm C.P. brass waste coupling of approved make, 25 mm G.I. waste pipe complete including cutting & making good the wall. Size 550 x 400 mm

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 1500x450 mm

P & F Towel Rail or Ring of approved quality/ make: C.P. brass towel rail elbow type with concealed screws size 450 mm (Heavy duty)

P & F jet spray for water closet with C.P. Copper tube flange of approved make

P & F Bib Cock (IS : 8931 Mark), Superior quality of approved make:

P & F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin, Gyser etc.

P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make

P & F Flush Cock / Flush Valve (IS : 9758 Mark) for WC of approved quality make :(-do-)exposed 25mm nominal bore.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

Providing at site, lowering & laying in trenches, aligning & jointing of PVC-U pipes (SN 8) as per IS 15328 (amended up to date) and as per specifications with rubber rings with socket and spigot joint, (EPDM/SBR) for all depths for pipe length as per drawing and specification including hydraulic field testing (including the cost and conveyance of water to site for testing) and commissioning etc complete as directed by Engineer. 160 mm Nominal Dia

Constructing brick masonry road gully chamber 50x45x60 cm with bricks of class designation 75 in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm precast R.C.C. horizontal grating with frame complete as per standard design : With bricks

Construction of septic Tank in all types of soil with 40 Cm .thick masonry in CM 1:6, 15 Cm thick C.C bed of 1:5:10, M-15 grade C.C flooring & over stone slab covering ,80 mm thick slab ,jointing of slab in CM 1:3. Ralthal, Kharanja, 50 mm thick stone partition walls, 20 mm thick plaster in CM 1:6 finished with neat floating cement, 4 Nos C.I foot rests of approved design ,two No. 450 mm dia each Ferro cement cover with frame, earth work etc. complete as per approved drawing including disposal of surplus earth within a lead of 50 mtr:-Size 400x140x150 cms (for 50 users)

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink asper IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required :510x1040 mm bowl depth 250mm.

Providing and fixing toilet paper holder : Vitreous china

Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead : 150 mm dia pipe

P&F liquid soap contained with brackets complete of approved make : C.P. brass

P&F Bath shower of approved quality/ make . C.P. brassof Heavy & superior quality, revolving with adjustable key 150mm.

Supply and fixing of wall hung-wc with UF seat cover, Hinges, accessories set size : 360x575x360 including single piece slim concealed cistern body and control plate fusion of Jaquar, Kohler,Roca or Equivalent make complete with all respect.

Providing and fixing uplasticised PVC connection pipe with brass 20 mm nominal bore

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work including cutting chases and making good the walls 15 mm nominal bore

25 mm nominal bore

32 mm nominal bore

Providing and fixing 100 mm sand cast Iron grating for gully trap.

Providing and fixing on wall face Unplasticised - PVC moulded fittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Coupler 75 mm

Single tee with door 75x75x75 mm

Bend 87.5° 75 mm

Providing and fixing on wall face Unplasticised Rigid PVC Single socketed pipes rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. 75 mm diameter

110 mm diameter

SITC of air cooled ducted split air conditioning machine with each having a capacity and details as mentioned below suitable for operation on refrigerant comprising of Scroll / Rotary / Reciprocating type compressor hermatically sealed complete with automatic capacity, safety switches, lubrication system, Suitable capacity squirrel cage induction motor with class 'B' insulation suitable for operation on 415 + 10% volts, 50 Hz, A.C. supply for Blower motor, Necessary drive arrangement for blower motor, Matching Air cooled condenser with necessary fittings for refrigerant piping connections, necessary structural support for mounting condensers, Microprocessor based control panel complete with accessories, machine isolation / disconnect switch as per specifications, Suction line insulation with minimum 19 mm thick polyvinyl rubber insulation, Refrigerant piping up to 10 Mtr. valves and accessories to inter connect compressor and condender including pressure testing, vacuum. Pipe shall be hard drawn copper, Necessary starters suitable for compressor motor complete with O/L , U/V, phase reversal protection, single phase preventors etc complete as required. Group -1 : GENERAl/MITSUBISHI/HITACHI 16.7 TR

2.0 TR with 3 star rating of BEE

1.0 TR with 4 star rating of BEE

SITC of Interconnecting refrigerant pipe work with closed cell elastomeric nitrile rubber tubular insulation between each set of indoor & outdoor units as per specifications including chase cutting, supports etc. as required. 6.35 mm

S & F of FR PVC insulated & sheathed 3 core flexible copper conductor ISI marked (IS:694) of 1.1 kV grade of following rating: 1.5 Sq.mm

S & F of rigid CPVC (25mm) drain piping of 6 kg/ cm2 with 6mm thick nitrile rubber insulation.

SITC of ducting made from GSS of class VIII & fabricated as per IS:655 and as per approved drawings & designs including the cost of hangers, supports , angle , expansion fasteners , closed cell neoprene gasket T&P etc. as required of following gauge: 0.63mm (24 G)

Supply and fixing of acoustic lining of ducts with following thick, density 48kg/cum resin bonded glass fibre insulation rigid board fixed in frame work as per specifications covered with reinforced black fibre glass tissue and finished with 0.50mm perforated aluminium sheet. 25 mm thick fiber glass

Supply & fixing of cross linked closed cell (XLPE) insulation sheet on duct including cost of adhesive complete as per specification and as required. 13mm thick

Supply and fixing of Double louvered extruded aluminum supply air grills without dampers. Front louvers fixed & rear louvers movable.

Supply and fixing of Double louvered extruded aluminum supply air grills with dampers. Front louvers fixed & rear louvers movable.

Supply and fixing of 2 way / 3 way Supply air diffusers of extruded aluminum with dampers, powder coated as specified and complete with Flush, 20mm flanges with PVC gasket, removable core type, square, rectangular as required.

Supply and fixing of 2 way / 3 way Supply air diffusers of extruded aluminum without dampers, powder coated as specified and complete with Flush, 20mm flanges with PVC gasket, removable core type, square, rectangular as required.

Making hole in stone masonary/ RCC with core cutter for accomodating refrigerant pipe/ drain pipe for split/ cassattee/ ductable AC 50mm to 150mm

Supply & fixing MS powder coated stand suitable for 2.5/3.0/4.0 Tr outdoor type of Split/Ductable/Tower AC.

Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq.mm FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) of approved make in surface / recessed ISI marked medium duty PVC conduit & it's accessories, round tiles,18 SWG M.S. box with earth terminal, screwless cage connectors for neutral looping in switch board & false ceiling point. 6 A switch, 3.0 mm thick phenolic laminated sheet, zinc plated / brass screws, cup washers, making connections, testing etc. as required. Short point (up to 3 mtr.)

Medium point (up to 6 mtr.)

Long point (up to 10 mtr..)

Wiring of 3 pin 5 amp. light plug point with 1.5 sq. mm FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq.mm FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) of approved make in surface / recessed ISI marked medium duty PVC conduit & it's accessories, 18 SWG M.S. box with earth terminal, screwless cage connectors for neutral looping in switch board & false ceiling point, 6 A switch, 6 A socket, 3.0 mm thick phenolic laminated sheet, zinc plated / brass screws, cup washers, making connections, testing etc. as required. On board

Short point (up to 3 mtr.)

Medium point (up to 6 mtr.)

Long point (up to 10 mtr.)

S&F following sizes (dia.) of ISI marked medium duty PVC conduit along with accessories in surface / recessed using saddles, clamps, fastener as required including cutting the wall and making good the same as required. 20mm

Wiring of 6 pin 15 amp. Light power point with 6.0 sq. mm PVC insulated unsheathed solid / stranded copper conductor 1.1 kV grade of approved make in surface / recessed ISI marked pvc conduit & it's accessories, 18 SWG M.S. box with earth terminal, screwless cage connectors for neutral looping in switch board , 15 A switch, 15 A socket, 3.0 mm thick phenolic laminated flexible copper conductor ISI marked (IS:694) of 1.1 kV grade and approved make in existing surface or recessed conduit/casing capping including making connections etc. as required. short pt upto 3 mtr

Medium point (up to 6 mtr.)

Long pt. upto 10 mtr

Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694) of 1.1 kV grade and approved make in existing surface orrecessed conduit/casing capping including making connections etc. as required. 1x1.5 mm

2x4mm+1x2.5mm

P & F surface/recessed type 10 mm thick Teak wood board duly antitermite treated, varnished and fixed by using gutties/ PVC fasteners of following size as required. 100 mm x 175 mm

200 mm x 250 mm

250 mm x 300 mm

P&F 240/415 V MCB of breaking capacity not less than 10 KA (B/ C/ D tripping characteristic) ISI marked IS 8828(1996)]/ conforming to IEC 60898 in existing board/sheets including making connections with lugs, testing etc. as required Singal pole MCB 6 A to 32 A rating

Double pole MCB 6 A to 32 A rating

40 A 63 A rating

Four pole MCB 6A to 32A MCB

40 A to 63 A rating

P&F 240/415 V isolator conforming to IS:13947-III/ IEC 60947-3 on existing board / sheet including making connections, testing etc. as required. Double pole isolator 30 A / 40 A rating

63 A rating

Four pole Isolator 30 A / 40 A rating

63 A rating

100 A rating

P&F Recessed/ Surface mounting heavy duty horizontal type sheet steel Distribution board phophatised/ powder painted complete with copper bus bar, shorting link , neutral link, earth link and din bar masking sheet conforming to IS13032 & IS8623 including making internal DB terminations with copper lugs , testing etc. as required 6 way

P & F following modular accessories made out of unbreakable and fire retardant poly carbonate with silver contacts including making connections testing etc. as required 6 A one way switch

6 A 3 pin shuttered socket

16 A 6 pin shuttered socket

TV coaxial socket

5 step fan regulator

Blanking plate

P & F following size mounting grid plates with cover plates 4 Module

5-6 Module

8-module

10-12 Module

P & F following size hot dip galvanized M.S. box with earthing terminal in recess/ surface suitable for modular accessories as required. 4 Module

5-6 Module

8-module

10-12 Module

P & F double ball bearing capacitor start ceiling fan of approved make complete with regulator and other accessories as required. (for estimation purpose only) 1200mm sweep

P & F extra down rod of 12mm dia, B class GI pipem including cutting, threading, drilling, fixing quarter pin etc as reqd.

P & F of shackle (iron hook) made from 2mm nominal thick CRCA sheet and bolts (2nos) of 6mm with spring washer nut, checknut & split pin as required.

P&F of Heavy duty capacitor start 900/1400 RPM single phase ISI marked Exhaust fan,IS:2312 marked in existing opening including making connections testing etc. as required. 450 mm sweep(900 RPM)

P & F ISI marked 32 A D.P. switch with fuse and indicating lamp including making connection testing etc. as required.

P & F ISI marked flush/surface type buzzer including making connection testing etc. as required.

P & F ISI marked single tone electronic call bell including making connection testing etc. as required.

P & F of capacitor start, metal body, metal blade three speed wall mounting fan of following sweep with the help of anchor bolts including making connection testing etc. as required. G2 400 mm sweep(Oscillating type)

Maintenance free gel earthing with pipe in pipe /Strip in Pipe technology filled with anti corrosive conductive compound (CPRI tested) below the ground in 150 -200 mm dia earth pit and surrounding filled with required mineral filling compound (MFC should have hygroscopic proper ty to retain the moisture for long time to create low resistance Zone) and C.C. finished chamber covered with hinge type with locking arrangement C.I cover. C.I. covered with hinge type with locking arrangement C.I cover. C.I frame of size 300mm x300mm complete testing of earth resistance frame of size 300mm x300mm complete testing of earth resistance as required of following sizes With pipe in pipe technology (inner pipe dia / outer pipe dia) 80 -100 micron G.I. coating With pipe in pipe technology with 80-100 micron G.I. coating G.I. pipe 2000 mm long , 50/25 mm , terminal 12 mm G.I. str

S & Laying following size earth wire/strip in horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles,making connection etc. as required 8 SWG G.I. wire

P & F of IP20 LED Recessed/ Surface Mounted Round/ sqaure Dimmable Downlight with die Cast aluminum housing & Heat sink for heat dissipation, high purity reflector with external driver having efficiency >85% and in compliance to IEC standards. (supplied togetherwith luminaire) Power consumption of < 15W/ 20W with1100/1400 lumens system lumen efficeancy of 70lm / Watt output downlights, life time of 50000 Burning Hours with 70% of intial Lumen maintained. CCT 3000° K, 4000° K and 6000° K. Fixture shall be CE compliance surface type LED downlight 12/14/15watt

LED downlight 18/20 watt

P & F of IP20 LED batten type light fixture made from CRCA sheet stlle housing suitable for mounting LED tube system (integral driver), Power consumption of 18W/36W, 1500/3000 lumens, system lumen efficiency 80 lm/ watt output, life time of 50000 burning hours with 70% initial lumen maintained. CCT 3000° K, 4000° K and 6000° K. 4’ LED Tube shape fixture 18W

P/ F IP-65/ IP-66 protected street light luminaries on existing bracket. Fixture made from powder coated single piece pressure die cast aluminum housing with heat dissipation fins on housing with high power LE Ds . Diffuser / glass cover for ensuring IP-65 protection for output of 100 lum/watt high power LED. Integrateddriver shall be high efficiency having efficiency more than 85 % and in compliance to IEC standards. System life of 50000 burning hours with 70 % of initial lumens maintained. Fixture shall be in CE compliance. IP-65 protected LED street light luminaries(Warm Light) LED street light fixture 45 watt

LED street light fixture 100 watt

P & F of IP-66 protected high power LED flood light system with extruded aluminium housing , toughened glass diffuser with suitable lenses on LED to achieve various beam angles, 240 volt, 50Hz, of high power LED lamps supplied with pre wired cable of 1 mtr. Integrateddriver shall be high efficiency having efficiency more than 85 % and in compliance to IEC standards. System life of 50000 burning hours with 70 % of initial lumen be maintained. Light output in red , green , blue, cool white or warm white colour as per engineers choice. Fixtures shall be CE compliance High power LED flood light 150 watt (Warm Light)

P & F of IP68, IK10 protected LED Buried marker light / Step Light Fixture. Fixture made of powder coated die cast alluminium with Toughened Glass cover and appropriate beam angle lens to be used as per requirement. The System level Luminous efficacy must be >90 Lumen/W. High Power LEDs at 1W/2W per LED. The driving current should be Minimum 350 mA per LED. CRI>70, CCT: 3000/6500 K. The integral SMPS based electronic driver must be constant current and surge protection of min. 4KV(L-N) and efficiency > 85%, PF>0.9 and input Voltage range of 90-270V AC at 50Hz. System life of 50000 Burning hours with 70% of Initial Lumens maintained. Light should include quick connecting cable coupled with various mounting accessories. Light output in Cool white or Warm White Colour as per engineers choice. Fixture must be in compliance with IS/CE Standards burial light-10 w

Supply and erection of Octagonal pole of following length and dimension as per table-3 with base plate on the cement concrete foundation of M-15 /M-20 grade (1:1.5:3) with the help of anchor bolts of grade 6.8 (IS 1367 P III ). The pole shall be made of S-355JO grade steel sheet , folded lengthwise to obtained Octagonal shape, having single longitudinal seam weld and hot dipped galvanised internally & externally in accordance with IS 2629. The pole shall have a weatherproof flush door and locking arrangements. The complete work shall be supervised and certified by the manufacturers for satisfactory supply, erection, testing and commissioning. 7 Mtr.

Supply, Erection and Fixing of hot dipped galvanised Overhang (60 X 3.25 mm) with cap (250 x 137.9 x 4.05 mm) over the existing poles Single arm overhang

Double arm overhang

Supply and erection of Decorative Cast Iron pole as per approved design of following length with base plate on the cement concrete foundation of M-15 grade (1:1.5:3) with the help of anchor bolts of grade 6.8 (IS 1367 P III). The pole shall be made of Cast Iron as per IS 210:1993, precision machining and filling job to achieve good finish and a fine coat of primer on each element before assembling. After assembling of each element one coat of primer and two coats of P.U. paint are applied. Approved coloured UV resist coating of mat/ glossy/metallic finish followed after air drying of pole. The pole shall have a weatherproof flush door and locking arrangements, two/ one arm bracket of length of 430/380mm complete in all respect. 3 mtr

P&I of IP65 protected Top/Bottom mounted LED Post top Light system. Fixture made of powder coated die cast alluminium housing with UV stabalized PC diffuser. The System level Luminous efficacy >90 Lumen/W. SMD LEDs , System CRI>70, CCT: 3000/4000/6500 K. The integral SMPS based electronic driver must be constant current and surge protection of min. 4KV(L-N) and efficiency > 85%, PF>0.9, THD<20% and input Voltage range of 90-270V AC at 50Hz. System life of 50000 burning hours with 70% of Initial Lumens maintained. Light output in Cool white or Warm White Colour as per engineers choice. Fixture must be in compliance with IS/CE Standards. External Surge Protection Device(SPD) to be connectedsaparately 40W LED Post Top Fixture Top Mounted

SITC of quick make and quick break 4 POLE current limiting MCCB having following current rating, short circuit breaking capacity at 440/415 V, 50 Hz; O/L & S/C settings and conforming to IS 13947-2 / IEC 60947- 2 with front face and centralised adjustable, line load interchangeability, having positive isolation capability,provision for UVR , shunt trip ,earth fault trip, push (test) to trip , including making connections with lugs /spreaders etc. as required 250 Amp , 35/50kA, adjustable O/L & adjustable S/C

630 Amp , 35/50 kA, adjustable O/L & adjustable S/C

SITC of walll/free standing floor mounted dust and vermin proof compartmentalised cubical panel made out of CRCA sheet, required hardware, duly painted by two coats of zinc/red oxide primer followed by Powder coated / epoxy / PU painted with phosphatisation in grey or required shade after rinsing. The panel having PU/Neoprene rubber gasket of not less than 3mm thickness,separate detachable, gland plate M.S. base channel, hinged door with locking arrangement for equipment/switchgear. Thickness of sheet shall not be less than 1.6mm up to 600mm length/width of any compartment and be of 2.0mm above 600mm. Load bearing structure shall be of 2.0mm thick sheet supported by base M.S. channel if required. Side walls and cable alley compartments having bolted type doors with detachable extension type structure (only outer area on all sides shall be measured and panel to be fabricated from CPRI approved fabricator). sqm

Supplying and fixing of Aluminium / Copper bus bar by means of SMC / DMC type insulator, high tensile nuts and bolts spring washers in existing panel including bending , cutting in required shape and size and colour coding with heat shrinkable PVC sleeves. Electrolytic grade aluminium bus bar

SF of (0-500) V range Volt meter on existing panel , making connection by PVC insulated copper conductor with PVC sleeves /channel etc. as required.Analog type

SF of CT operated direct reading type Ampere meter on existing panel , making connection by PVC insulated copper conductor with panel , making connection by PVC insulated copper conductor with

SF of Current Transformer , with all necessary support in existing panel including connection etc. as required.200/5 to 400/5,10VA

S&f 110/220v LED (22.5mm dia) indicating lamps with interal circuit,terminal block including connection Red/Yellow/Green colour

S&F electrical insulating rubber mat confirming to IS15652/2006 with one side anti skid abberation marks and pasting the mat with synthetic rubber adhesive as required.Grade I 11kv , 25mm thick

P & F of ac operated heavy duty 230 /440 Volt power contactor conforming to IS:13947-4-1/IEC:947-4-1having provision of mechanical interlocking, Din rail mounting type including making connections, testing etc. as required. 4 pole AC 1 Rating contactors 26 to 632 Amp

46 to 60 Amp

Providing & Laying XLPE insulated / P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor Armoured of IS:7098-I/1554-1 approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand, second Class bricks covering, refilling earth, compaction of earth, making necessary connection, testing etc. as required of size. 300 sq mm 3.5 core

120 sq mm 3.5 core

185 sq mm 3.5 core

35 sq mm 3.5 core

6 sq mm 2 core

Providing & Laying XLPE insulated IS:7098/II/85 of approved make H.T.cable for working voltage 11 K.V.Un-Earthed with Stranded Compacted Circular Aluminium Conductor, Conductor Screened with Extruded Semi-conducting compound, XLPE Insulated, Insulation Screened with extruded semi-conducting compound in combination with Copper Tape, cores laid up, inner sheath of Thermoplastic tape, galvanised flat steel strip armoured and overall Extruded PVC Type ST- 2 Outer Sheathed cable direct in ground including excavation of 30cmx100cm size trench, 25cm layer of river sand, second Class bricks covering, refilling earth, compaction of earth, making necessary connection testing etc.as required of size. 3 core 120Sqmm

Providing & making heat shrinkable type indoor/outdoor/straight through terminations /joint kit of approved make suitable for XLPE insulated 11 KV cable, with required components, prepration of cable ends,testing etc. as required of following sizes . Indoor 3 core 120/150/185 Sq.mm

Outdoor 3 core 120/150/185 Sq.mm

Supply and fixing of distribution type Lightning arrestor 9 kV, 5 kA (IS:3070) with mounting base to be installed on existing DP structure. (Type tested by ERDA/CPRI.)

Supply and fixing of 11 kV Danger plates as per specification of Discom on the existing poles complete in all respect as per Discom specification.

SITC of DG Set complete with 1500 RPM Diesel Engine of suitable BHP & AC Brush less SPDP Alternator mounted on a common base Frame & coupled through a flexible coupling or close coupled.Alternator shall be self regulated with standard Alternator Protection( Over voltage, over speed & under voltage). Engine shall have residential silencer, up to 10 M exhaust piping , electronic /Mechanical governor, Manual & electric Start, Batteries, Fuel tank (with Stand) & piping, control panel (16 G) with MCCB (4P; 25 KA), Ammeter, Voltmeter, Frequency Meter, Energy Meter & Hour Meter, Engine instruments panel, AVM and with Weatherproof, powder coated Accoustic enclosure for DG set for sound attenuation fabricated from 1.6 mm CRCA sheet steel (structure) with side wall fabricated from 1.6 mm CRCA sheet and filled with foam as per CPCB norms latest amendments & IS 8183 .The doors are fabricated from 1.6 mm CRCA sheet packed with accoustic material, floor of MS chequrred plate 5.0 mmthick, All doors/ opening are sealed with neoprene/ EPDN gaskets. The enclosure has built in fuel tank, residential silencer (isolated from main DG chamber) with protection and tripping of DG set against temperature of more than enclosure with DG control panel having microprocessor based genset monitoring and control system mccb Ammeter, voltmeter, Pf meter, frequency meter, KWH meter, Ind. Lamps etc. mounted inside enclosure , visible and accessible from outside. The enclosure should be suitable for following capacity DG sets and alternator.Noise level is less than 75 db (A) at a distance of 1 Mtrs. duly certified by authorized agency. Complete in all respect of following capacity : 320 KVA

P&F TP&N 415 V metal clad HBC cum rewire able switch fuse unit with porcelain kit-kat & neutral link and conforming to IS:13947 P-I&III and making connections with lugs testing etc. as required. 100A rating

S & Laying following size' A' class G.I. Pipe with accessories for laying earth conductor/strip in ground/surface/recess as required 32mm dia

50mm dia

Providing and fixing at all height false ceiling including providing and fixing of frame work made of special sections power pressed from M.S. sheet and galvanised in accordance with zinc coating of grade 350 as per IS : 277 and consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 22mm and 37mm at 1200mm centre to centre one flange fixed to the ceiling with dash fastener 12.5mm diax40mm long with 6mm dia bolts to the angle hangers of 25x25x0.55mm of required length, and other end of angle hanger being fixed with nut and bolts to G.I. channels 45x15x0.9mm running at the rate of 1200mm centre to centre to which the ceiling section 0.5mm thick button wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 450mm centre to centre shall be fixed in a direction perpendicular to G.I. channel with connecting clips made out of 2.64mm diax230mm long G.I. wire at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450mm centre to centre with 25mm long drive-all screws @ 230mm interval including jointing and fixing to a flush finish of tapered and square edges of the board with recommended filler, jointing tapes, finisher and two coats of primer suitable for board as per manufactures specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed all complete as per drawing and specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum board conforming to IS: 2095-

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete

Ceiling Painting ( two Coats) with plastic emulsion paint of approved brand and manufature (Asian Paint/Buger Paint/ ICI Paint/J & N paint/ Nerolac or equivalent make as approved by the Deptt.) on new surface to give an even shade after throughly brushing the surface free from mortar droppings and other foreign and sand papered smooth Plastic emulsion paint of approved brand and manufature (Asian Paint/Buger Paint/ ICI Paint/J & N paint/ Nerolac or equivalent make as approved by the Deptt.)

Providing and fixing thermal insulation of ceiling (under deck insulation) with Resin Bonded Fibre glass wool conforming to IS : 8193 density 24kg/m3, 50mm thick, wrapped in 200 G Virgin Polythene bags fixed to ceiling with metallic cleats (50x50x3 mm) @ 60 cm and wire mesh of 12.5mm x 24g wire and mesh, for top most ceiling of building.

Fire pump Providing And Fixcing Local Fire Authority approve diesel Pump With Discharge 1650LPM 55 mtr head Complete with all nesscery Make CRI

Providing And Fixcing Local Fire Authority approve men electrical Pump With Discharge 1620 LPM 56 mtr head Complete with all nesscery Make CRI

Providing & fixing, testing & commissioning ISI marked C.I double flanged type Non- Return valve 150 mm dia

100 mm dia

80 mm dia

SITC of pressure switches for Main, Jockey pump and standby Diesel pumps, including necessary wiring upto control panel and Ball valve.

Supplying and fixing air vessel of continuous welded construction for pump room made of 450 mm dia,fabricated out of 10 mm thick dished ends and 8 mm thick MS sheet, 2000 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia Gun Metal wheel valve, with required accessories, pressure gauge and painting with two coats of Red Oxide and two coat of post office red enamel paint as required.

Providing, installation, testing and commissioning of stainless steel strainer of dia given below fabricated out of 1.6 mm. thick stainless steel sheet with 3 mm. dia holes with stainless steel flange of following sizes. 150 mm dia

Contolled Panale

Supplying and fixing S.S single headed Extrnal hydrant valve with 1 No. 63 mm dia instantaneous Gun metal coupling and cast iron wheel, ISI marked, conforming to IS 5290 (type A) with blank Gunmetal cap and chain as required.

Supplying and fixing Fire Brigade Connection of CI body with S.S. male instantaneous inlet couplings complete with cap and chain as required for 150mm dia MS pipe connection, conforming to IS 904 as required of following way : 2 Way (for Drawout )

Providing and fixing of 4 way suction coupling for fire brigade withdrawal of water from fire tank with 150mm dia pipe and foot valve.

Supplying and fixing 63 mm dia, 15 mtr. Long RRL hose pipe with 63 mm dia male and female Gun metal couplings duly binded with GI wire, rivets etc. conforming to IS 636 (type-A) as required.

Supplying & fixing 63 mm dia Gun metal branch pipe with 20 mm (nominal internal diameter) size nozzle confoming to IS 903, suitable for instantaneous connection to interconnect hose pipe coupling as required

Supply & Fixing of Fire Man's Axe with heavy Insulated rubber tested up to 20 KV and confirming to IS ;926

Providing, laying, testing & Commissioning of 'C' class heavy duty MS pipe conforming to IS 3589 / 1239 for hydrent and sprinkler applications including fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. fixing the pipe on the wall/ceiling with suitable clamps and including painting of two coats of Red Oxide , painting with two or more coats of synthetic enamel paint of Post office red shade complete as required. 80 mm dia

100 mm dia

Double Doar Fire Hose Box

Supplying, fixing, testing commissioning of butterfly valve PN 1.6, with Bronze/ Gunmetal seat duly ISI marked complete with Nuts, Bolts, washers, gaskets, conforming to IS 13095, of following sizes as required. 80 mm dia

100 mm dia

100 mm dia

Providing, installation, testing and commissioning of Brass ball valves of following sizes as required. 25 mm dia.

Supplying, laying, fixing, testing and commissioning of following sizes (NB) of ISI marked heavy C - class M.S. pipes including cutting, threading, welding etc. and providing all fittings e.g. elbows, reducers, clamps, hangers, flanges, gaskets, nuts, bolts and washers etc. including painting of pipes and fittings with red paint over a coat of ready mixed primer, both of approved quality and making good the same etc. complete in all respect as required. 25 mm

Providing and Fixing 15 mm dia gunmetal / brass quartzoid type Sprinkler Head with quartz bulb and set to operate at specified temperature. Pendent/Upright 68° C, Chrome plated

Addressable Smoke detecter

Beam detecter

Mannual Call Point

Hotter

1 loop controlled Panel

2 core 1.5 sq mm wire with pvc conduct

Supply & Fixing ISI marked ( IS : 15683 ) Poratable Fire Exitnguisher, co.2 type 4.5 K.G

Supply & Fixing ISI marked ( IS : 15683 ) Portable Fire Exitnguisher, ABC type,finished externally with red enamel paint, complete in all respects including initial fill and wall suspension of following capacity. 6 K.G

Construction of Tube-well upto 100 Meter depth and above in all type of rocks by DTH system and over burden to accommodate casing pipe of following sizes in all types of soils and over burden including lowering of casing pipes but excluding cost of casing pipes as per IS : 2800 (Part I & II) 1979 specifications. The work would be completed after obtaining sand free water. The tube well should have a throughout bore as per nominal dia of casing pipe:200 mm dia Nominal bore

Supply of strainer pipes made of ERW M.S. black pipe ISI mark of following sizes at the site of work including required size of slotting as per IS:8110-1985 of following nominal bore sizes at site of work.200 mm dia

Supply and fixing of tube well cover of M.S. sheet (6mm thick) with nuts and bolts complete for casing size:200 mm dia

Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms, lift up to 1.5 Mtr, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in lead of 50 mtr. All kinds of soil. Ordinary Rock Depth upto 1.5 m

Hard Rock

Filteration Tank

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Filteration Tank

Random rubble masonry with hard stone in foundation and plinth :Cement mortar 1:6 (1 cement : 6 coarse sand)

Cement plastering including T&P, scaffolding, material and complete labpour, including cost of water, curing, racking of joints etc. with 20 mm cement plaster of mix :1:6 (1 cement : 6 fine/ coarse sand)

filteration Tank

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement - All work upto plinth level :1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Centring and shuttering with plywood or steel sheet upto two stories or height upto 7.5 metre above plinth level including strutting, propping etc. and removal of form for :Suspended floors, roofs, landings, balconies and access platform.

Reinforcement for R.C.C. work at all levels including straightening, cutting, bending, placing in position and binding all complete.Thermo-Mechanically Treated bars. 1.1 % Of Concrete

Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

Brick work with modular fly ash lime bricks (FALG Bricks) conforming to IS:12894-2002, class designation 100 average compressive strength in super structure above plinth level upto two stories in :Cement mortar 1:6 (1 cement : 6 Coarse sand)

Stone Aggregate Stone Aggregate (Single size) : 20 mm nominal size

Aggregates 13.2 mm to 5.6 mm

Stone Aggregate (Single size) : 40 mm nominal size

Stone work (machine cut edges) for wall lining etc. (veneer work) backing filled with a grout of 12mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing by means Red sand stone - Exposed face machine cut and table rubbed with rough backing. 70 mm thick

Labour charges for Animar dressing (old M.G.H. pattern) over Jodhpur or equivalent white Ashlar over already two line dressed surface by using special tools i.e. toothed chisel etc.

Supplying and fixing ashlar coping ordinary 7 to 10 cm. thick 2-line dressed (normal length of single piece not less than 0.90m) (a) White Ashlar

Supplying and fixing Jaisalmer stone Dassa (sills) fine dressed upto 15 cm. Thickness including panny type ornamental work.

Supplying and fixing Jaisalmer stone Galat (moulded cornice) fine dressed and carved with cut stone work complete.

Supplying and fixing Jaisalmer stone Chhajja (including projection) 5 to 7 cm. Thick fully dressed carved with cut stone work weather dripped complete.

Providing dab stone over Chhajjas duly fixed in cement sand mortar 1:6 complete :

Supplying and fixing Jaisalmer stone pillars (Surahidar) with flute fully dressed and carved with ornamental work complte.When fixed in wall

Supplying and fixing Jaisalmer stone side kanwalies (Jambs) upto 15 cm. Thick fine dress including ornamental cut stone work in face complete:-Ornamental cut stone work of flower leaves etc.

Supplying and fixing Jaisalmer stone Moulded arches (Margole) Fully dressed carved with ornamental work 10 to 15 cm. Thick for Tibaries.B) Fully Flowered leaves

Supplying and fixing Jaisalmer stone kangoora fine dressed and ornamental cut work upto half depth complete.

Supplying and fixing Jaisalmer Takiya and Thambli fully dress and with ornamental cut stone work complete for railing and parapet etc.

Supplying and fixing Jaisalmer stone Jali 5 to 7 cm.thick fully dressed carved upto full depth with ornamental cut stone work & with margol for tibaries complete.

Supply and fixing ashlar lintels and Dassa exposed horizontal and vertical faces 3 - lines fine dressed (bearing bed & top surface made perfectly even)Above 150

Supplying and fixing Jaisalmer stone todies 7 to 10 cm thick fully dressed carved upto full depth with ornamental cut stone work complete.

Supply and fixing Jodhpur sand stone Machine cut Dash, Coping,sill,lintel fixed in cement sand mortar 1:4(A) 15 cm (6") thick

Labour charges for Jodhpur or equivalent white Ashlar stone cornice of approved shape and design 18 cm. thick 38 to 40 cm. wide and Animar dressing tools i.e. toothed chisel etc.

Labour charges for fixing of stone chhajja and makin good the same (exposed surface to be measured.(A) White Ashlar