SPECIAL REPAIRS TOILET BLOCK (P-03, P-04, P-14, P-15, NP-35 AND NP-18) (DAO OFFICE), SPL REPAIR TO DRAINAGE SYSTEM FROM WORKER CANTEEN TURNING TO DAO OFFICE CORNER AND ADDITION ALTERATION TO BLDG NO P-9A (DINING HALL) IN AFMSD MUMBAI UNDER GE (NORTH)

Taking down cement plaster on brick or stone walls, ceilings etc., without disturbing brick work, including raking out joints, hacking for key, scrubbing down with water and removing of debris outside MD land complete all as specified and as directed by Engineer-in-Charge

Material and labour for point wiring concelead type with proper colour coding complete with and including PVC insulated unsheathed, flexible bright annealed multi stranded copper conductor single core FRLS cable 1.5 Sqmm (22/0.30) 1100 volt grade confirming to IS 694 drawn through in and including (medium grade) rigid non metallic PVC conduit pipe 25 mm size ISI marked with conduit accessories / fittings / junction box / inspection covers etc of ISI marked and cutting chases for concealed conduit with all surfaces by means of screws and sunk / cup washers, with Modular metal flush box including white cover plate with frame for mounting of switches sockets fan regulators etc including 1.5 sqmm (22/0.30) 1100 volts grade PVC insulated FRLS unsheathed flexible, multi stranded copper conductor cable (green colour) as continuous earthwire connected to metallic bodies of luminaries / fans etc at one end and to common earth dolly at other end for one light / Fan / Exhaust fan / bell point controlled by one, one way switch all as spe

Dismantling floor hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish out side MD land complete all as specified and as directed by Engineer-in-Charge.

Demolition of brick work/stone masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, PCC coping etc, but excluding ashlar facings, dressed stonework and precast concrete articles and removing of debris outside MD land complete all as specified and as directed by Engineer-in-Charge.

Supply and fix mild steel TMT bars, 10mm dia and over cut to length bent to shape required including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed by Engineer-in-Charge.

Demolition of reinforced cement concrete of any description (beam, chajja, fins, RCC water tank, roof sla etc) & in any position including necessary scaffolding arrangement (reinforcement cut as required to facilitate demolition) and removing concrete debris and depositing outside MD land all as specified and as directed by Engineer-in-Charge.

Material & labour for repairing of damaged concrete portion by using superfluid dual shrinkage compensated structural grade M-40 micro concrete of at all levels with all leads and lift as directed including mixing, laying, levelling, finishing and curing complete all as specified and directed by Engineer-in-Charge. Make: Fosroc / SIKA / BASF / Krishna Conchem or equivalent approved .

Material and labour for providing and applying two coats of anticorrosive epoxy phenolic rebar protective system IPNet RB of Krishna Conchem or equivalent of approved make and quality comprises of resin and hardener mixed as per manufacturer's instructions with minimum 9-10 hours between the coats, sprinkling dry sand when 2nd coat is tacky so as to provide rough finish and ensuring air curing of minimum 10 hours after the top coat before any subsequent treatment etc. including scaffolding etc complete all as specified and as directed by Engineer-in-Charge. Make- Dr FIXIT/ FOSROC/ Krishna Conchem/BASF/Sika as approved by GE Note: (a) New Reinforcement shall be measured and paid separately under respective item. (b) Cost of welding deemed to be inclusive in this item of work.

Currency Convertion against EACH Item

Material and labour for 10 mm thick rendering in Cement Mortar (1:4) on internal wall surface including dubbing out plaster in Cement Mortar (1:6) of any thickness & finishing the surface even & smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.

Material and labour for rendering 15mm thick plaster in cement mortar (1:4) on external surfaces of the brick, PCC block or concrete surfaces including dubbing out plaster in Cement Mortar (1:6) of any thickness & finishing the surface even & smooth without using extra cement using water proofing compound complete all as specified and as directed by Engineer-in-Charge.complete all as specified and as directed by Engineer-in-Charge. Note: waterproofing compound shall be measured and paid separately

Material and labour for Plain Cement Concrete 1:4:8 type D2 using 40mm graded stone aggregate as in foundation / mass concrete/filling complete all as specified and as directed by the Engineer-in-charge

Material and labour writing letters or figures (Block, Roman, Italic or Indian) to building with flurocent synthetic enamel paint of EACH 30 cm high in words and figures such as (P-23, P-25 like etc) over synthetic enamel fluorescent painted surface complete all as specified and as directed by Engr-in-Charge.

Supply and fix MCB SPN, 32 Amps, 240 volts,10 KA, 'C' curve including taking down unserviceable complete all as specified and as directed by Engineer-in-Charge. Make : Legrand / L&T / Havells / ABB / Siemens / Schneider

Material and labour for coloured glazed ceramic tiles of size 350mm x 250mm x 7 mm thick/ 450mm x 350mm x 7mm (or nearest size) ,on vertical surface such as skirting, dado, riser/steps etc, set and jointed in neat cement slurry and pointed in white or colour cement to match over & including cement plaster 10mm thick in Cement mortar 1:4 complete all as specified and as directed by Engineer-in-Charge. Make:M/s H R Johnson/M/s Orient Bell Tiles/M/s Kajaria/M/s Somany Tiles Ltd/M/s Nitco tiles/M/s Swastik Tiles / RAK tiles/ Orient bell

Material and labour for 50mm thick cement concrete (1:3:6) type C2, using 40mm graded stone aggregate as in plinth protection laid in panel surface and finishing the surfaces even and smooth without using extra cementcomplete all as specified and as directed by Engineer-in-Charge.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed by Engineer-in-Charge.

Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC s

heet, reinforced with M.S. square tube and fixing in opening as per specification & drawing on Serial Page No 151 of SSR Part II (pertaining to item No 08095) and edges to be painted to match with prelam sheet complete all as specified and as directed by Engr-in-Charge. Make : RAJSHRI / SINTEX / TUFFFLON / M/s Navratan Specialty Chemical LLP – ‘Brand : GIZA’

Supply and fix anodised aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and as directed by Engineer-in-Charge

Supply and fix in repair vitreous china wash down, white, water closet pan (pedestal pattern) with 'P' of 'S' trap (of size 465mm x 355mm x 265mm),including plastic seat cover to match with colour of WC, closed pattern with flat bottom & cover and chromium plated mild steel or aluminium anodized hinging device including connecting to trap and flushing pipe, anti-syphonage pipe etc complete all as specified and directed by Engineer-in-Charge. Make : Cera/Hindustan/Parryware/Jaguar/Hindware/Johnson

Taking up or down steel tubing and connections for 20mm bore of pipe complete all as specified and directed.

Taking up or down steel tubing and connections for 15mm bore of pipe complete all as specified and directed.

Refixng old steel tubing and connection in new or old position (walls, ceiling, floor etc ) bore of pipe in 20mm dia complete all as specified and directed.

M&L for 30 mm thick factory made moulded PVC door (Wood free) consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 20mm x 40mm for stiles as well as top, bottom & lock rail. M.S. frame shall have a coat of metal primer of approved make & manufacturer. The inside panel shall consist of 20mm thick multi-chamber hollow PVC section of 1mm wall thickness, bonded using solvent cement / cynoacrylate adhesive with 5 mm (+0.25) thick moulded PVC sheet of density 600 kg/cbm with 2, 4, 6 raised panel design in plain / prelam colours after routing the moulded design on one side of the inside panel. 5 mm (+0.25) plain / prelam PVC sheet to be pasted using solvent cement / cynoacrylate adhesive on other side of the hollow PVC section. All the four edge of the panel to be sealed with lipping of 10 mm thick & 20 mm wide PVC sheet baton made by sticking 2 nos. foam PVC sheets of 5 mm (+0.25) thickness using PVC solvent cement adhesive. Door edge lipping to be painted with PVC ink of matching colour of Plain/Prelam moulded PVC sheet of door 20 mm thick (5 mm x 4 nos.) thick PVC sheet to be given for lock provision at lock height. Door to be fixed with frame with 3 nos. stainless steel butt hinges of size 100mm x 25mm x 2mm and 50 mm long steel screws drilled suitable to pass through both the walls of the M.S. tube other hardware should be fixed with 25mm x 8mm size steel screws etc, complete as per manufacturer's specification and drawing or direction of Engineer-in-charge Make : RAJSHRI / SINTEX / TUFFFLON / M/s Navratan Specialty Chemical LLP – ‘B rand : GIZA’

Refixng old steel tubing and connection in new or old position (walls, ceiling, floor etc ) bore of pipe in 15mm dia complete all as specified and directed.

Supply and fix in repairs stop valve, cast copper alloy, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes or for unions of 20mm bore complete all as specified and directed by Engineer-in-Charge Make : Jaquar/ Marc/ CERA/ Kohler/ Player

Supply and fix in repairs PVC (SWR) bends any radius, 110mm dia. complete all as specified and

ditto as per item no.8 above but 5mm dia and over up to incl. 10mm dia in stirrups, spacers and binders complete all as specified as directed by Eng-in-charge.

Material and labour for cement concrete 1:4:8, type D2 (using 40mm graded stone aggregate), as bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested in as specified in Clause 18.68 of MES schedule Part I, bore of pipe 200mm bore of pipe complete all as specified and as directed by Engineer-in-Charge

Material & Labour for cutting into existing manholes for 100mm internal dia of pipes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B1, smooth finished and reforming benching as required complete all as specified and as directed by Engineer-in-Charge.

Material and labour for preparation of old plastered surfaces of ceiling and applying two coats of white wash complete all as specified and directed by Engineer in Charge.

Material and labour for complete removal of existing treatment of plastered wall surface and applying one coat of cement base paint as per manufacturer's recommendation upto a height of bldg roof including formwork/scaffolding/ladders and safety belts with precautions etc complete all as specified and as directed by Engineer-in-Charge. Make : Super Snowcem/ Duracem/ Aquacem/ Shalimar/ Berger

Earth work in excavation by mechanical means (Hydraulic excavator)/ in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m complete all as specified and as directed by Engr-in-Charge..

Material and labour for Pre-cast cement concrete block masonry 1:3:6 type C1, (using 20mm graded stone aqggregate), with solid blocks, exceeding 10 cm in width and setting in cement mortar 1:4 complete all as specified and as directed by Engineer-in-Charge.

Removing excavated material to a distance exceeding 250 m but not exceeding 500 m and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and as directed by Engineer-in-Charge

M & L for extra for forming fair finished drain or channel 30cm inner girth in cement concrete with using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and as directed.

Material & labour for Rolled mild steel as in MS base plates (plain or chequered), channels , square cut or notched ( ordinary and counter sunk) forming holes including cutting ,welding or connecting conforming to Fe-290 (Gde E-165) complete all as specified and directed by Engineer in charge.

Supply & Fix hilti wedge anchor fastner, 12mm dia 100mm long or similar approved make fixed with anchor grout lokfix E77 or approved make of similar characteristics, the thixotropic nature of lokfix polyester resin grout P reduces flow of grout out of the hole, in overload or horizontal holes incl. drilling holes of required sizes cleaning with the same with air pressure and filling with chemical as secified above placing of MS plate of required size and shape and drilling/ fixing the anchor bolt fastner complete all as specified and directed by Engineer-in- Charge. Note:- All MS items weight will be measured seperatly.

Material and labour for plain cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, holstring courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, kerbs, water troughs, bed plates, concrete block for hold fast etc and the like including necessary form work for fair finished surfaces including weathering, slightly rounded or chamfered angles and throating, as directed etc complete all as specified and as directed by Engineer-in-Charge.

Material and labour for preparing new steel surfaces /previuosly untreated surface of any description, over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engineer-in-Charge. Make: Make : Asian Paints/ Nerolac Paints/ Dulux ( Akzonobel)/ Nippon Paint India Pvt Ltd

Material and labour for preparation of old plastered wall surface and applying two coats of Acrylic weather proof coat 100% exterior grade paint over one coat of acrylic weather coat primer over 1mm thick layer of external grade putty complete a

Supply and lay double wall corrugated (DWC) HDPE pipe 40/ 32 mm outer dia , as per IS-16205 including couplers and bend for cable protection laid in trenches etc complete all as specified and as directed by Engineer-in-Charge Make : TELEREX 450N/ Rex Polyextrusion Ltd/ Finolex/ Prince Pipes and fittings ltd/Kisan/Supreme/JAIN IRRIGATION SYS/ Astral

ll as specified and as directed by Engineer-in-Charge. Make : APEX ULTIMA” of Asian Paints/ “WEATHER COAT ALL GUARD” of Berger Paints/"EXCEL TOP GUARD” of Nerolac/ “DULUX WEATHERSHIELD MAX” of ICI India

Estimated Rate in Rs. P

S&F for 75mm thick steel fibre reinforced (SFRC) factory made man hole cover with iron frames (medium) complying to the standard specifications as mentioned in the IS 12592 BIS Standard, minimum load bearing capacity 5 ton/sqm, in square, rectangular or circular shape complete all as specified & as directed.

Supplying, laying,connecting, testing & commissioning LT UG XLPE insulated, heavy duty, 1100 V grade (earthed ) electric cable with aluminium conductor, served with an inner sheathing of PVC tape, armoured with galvanised steel wire or tape and overall PVC sheathed of size 10 Sqmm x 2 core, laid in trenches or passing through pipe or fixed to wall, making all connections with and including provision of necessary glands, lugs, bushing etc as required including taking down old unserviceable cable complete all as specified and as directed by Engineer-in-Charge Make: Cable Corporation of India (CCI)/ Asian Cable Co, Chattisgarh/ Finolex/ Polycab/ Gloster/Universal/ RPG Cables Ltd , Thane/ Havells India Ltd/ RR Kabel/ KEI Industries Ltd(KEI)

Supplying, laying,connecting, testing & commissioning LT UG XLPE insulated, heavy duty, 1100 V grade (earthed ) electric cable with aluminium conductor, served with an inner sheathing of PVC tape, armoured with galvanised steel wire or tape and overall PVC sheathed of size 10 Sqmm x 2 core, laid in trenches or passing through pipe or fixed to wall, making all connections with and including provision of necessary glands, lugs, bushing etc as required including taking down old unserviceable cable complete all as specified and as directed by Engineer-in-Charge Make: Cable Corporation of India (CCI)/ Asian Cable Co, Chattisgarh/ Finolex/ Polycab/ Gloster/Universal/ RPG Cables Ltd , Thane/ Havells India Ltd/ RR Kabel/ KEI Industries Ltd(KEI)

Material and labour for complete removal of existing treatment on wall surfaces and applying two coats of distemper oil emulsion with roller including a coat of white JK Birla wall care putty 2mm thick over a coat of alkali resistant wall primer complete all as specified and directed by Engineer in Charge Make: M/s SHALIMAR / M/s BERGER / M/s NEROLAC /M/s ASIAN (Tractor Brand)

Supply and install wall-mounted split units indoor/outdoor, operating voltage 110 to 285volts, 50Hz complete with cordless remote control unit and with in-built anti-microbial air filtration, dehumidifier for better indoor air quality with minimum 5starrating, DNNS Self Heal Coating and EER upto 3.2of capacity 2TR, inverter type, 6in1convertible or adjustable mode, high swing typel eft}/right}/up}/down}, with high ambient temperature upto 52degree celcius including fixing of voltage stabilizer 5KVAwith digita ltemperature display and MS bracket for outdoor unit on wall with copper cooling tube extra upto 15RMetccomplete all as specified and directed by Engineer in Charge. Make: 1.5TR- 4503517/ 245VVectra Plus or equivalent in BlueStar/ Lloyd/Daikin/Hitachi

Material and labour for providing and applying a priming cum bonding coat of two component Epoxide Resin conforming to ASTM-C-882-91 of approved make and quality to clean and sound concrete area by brush or any other established method by mixing base and curing agent 2:1 proportion by weight for joining old and new concrete as per technical specifications of manufacturer complete all as specified and as directed by Engineer-in-Charge. Make- Dr FIXIT/ FOSROC/ Krishna Conchem/BASF/Sika as approved by GE Note-Work shall be carried out as per the manufacturers specifications & certificate on this account shall be taken from consultant and as approved by Engineer-in-charge Note for Item No.7 to 17:- (i) The work under Item No. 7 to 17 shall be carried out by authorised applicator only. (ii) Defect liability for these items shall be 5 years from certified date of completion. (iii) Amount of 5% of these items shall be retained during RAR and FB. This amount shall be released after successful completion of Defects liability period as mentioned above. (iv) Non destructive testing shall be got carried out through IIT / NIT / College of Engineering Pune to decide fulfillment of fitness criteria of structure. (v) The test shall be carried out at EACH discrete location or locations decided by GE or testing authority. (vi)The cost of testing shall be deemed to be included in the rate quoted by the contractor. Completion shall be issued by GE after only getting structural stability certificate of EACH respective building from testing authority.

BASIC RATE In Figures To be entered by the Bidder Rs. P

Supply and fix Single pole and neutral enclosure with a 3 pin plug and socket of 16 Amps complete with one single pole MCB 20 Amps 240volts, fixed on wall complete all as specified and as directed by Engineer-in-Charge. Make: L&T/ABB/Siemens/Schneider/Havells

Supply and fix in repairs exhaust fan, AC, single phase, 230V, 250mm sweep, 1200 RPM, 5 blade, metal body complete all as specified and as directed by Engr-in-Charge. Note: Old exhaust fan will be deposited at MES store yard Make- Crompton Greaves, Bajaj, Orient, Khaitan, Havells

Supply and fix in repairs exhaust fan, AC, single phase, 230V, 250mm sweep, 1200 RPM, 5 blade, metal body complete all as specified and as directed by Engr-in-Charge. Note: Old exhaust fan will be deposited at MES store yard Make- Crompton Greaves, Bajaj, Orient, Khaitan, Havells

Material and labour for 25mm thick Plain Cement Concrete 1:2:4 type B0 using 12.5mm graded stone aggregate as in levelling course for laying floor tile complete all as specified and as directed by Engineer-in-Charge

S&F celling rose, 3 phase/PVC/polycarbonate isolated body ISI(marked) complete all as specified and directed. Make : Legrand /crabtree/ Honeywell/ Anchor

S&F modular switch , SP, one way, 6A, one module, 240 V, all as per relevant IS complete all as specified and directed. Make : Anchor(Panasonic)r / Legrand / Havells/.Crabtree/Leader

Supply, fix and jointing steel water tubing of 25mm bore medium grade, galvanised iron with all fittings such as Tees, elbows, sockets, bends, unions, short pieces, nipples, brass nuts and diminishing pieces complete all as per IS 1239 including fixed to wall / ceiling or laid in floor with suitable size GI clamps including taking down existing GI pipe and making good disturbed surfaces as per existing surfaces complete all as specified and as directed by Engineer-in-Charge. Make: Tata / Jindal / Surya Prakash / Zenith

Supply and fix gun metal globe/ gate valve, 25mm bore, with iron wheel head, screwed both ends for iron pipes, ISI marked and fixed with suitable size of new union, nipple and reducer complete all as specified and as directed by Engineer-in-Charge. Make : Leader/Zoloto/Seiko/Sant/ Essco/Prayag

TOTAL AMOUNT in Rs. P

the contractor. Completion shall be issued by GE after only getting structural stability certificate of EACH respective building from testing authority.