SPECIAL REPAIR TO BLDG NO P-1, P-2, P-3 AND P-4 AT TORANGULLU CAMP UNDER GE (SOUTH) BANGALORE

Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing), removing servicieable tiles to store and rubbish off the premises.

M&L 25 mm thick cement concrete type B-0, 1:2:4 (using 12.5 mm graded crushed stone aggregate), as in sub base of floors.

Demolition of cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground floor)

M&L 75 mm thick cement concrete type D-2, 1:4:8 (using 40 mm graded crushed stone aggregate), as in sub base of floors.

S&F light coloured non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 15 mm thick screed in cement mortar 1:6 all as specified and as directed

All as per item No 05 above but in skirting over and including 10 mm thick plaster in cement mortar 1:4 all as specified and as directed

S&F coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in cement mortar 1:6.

S&F coloured Glazed ceramic tile in verticle surface 300x450x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10 mm thick rendering in CM 1:4

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering.

Dismantling wrought iron or mild steel works of any description not otherwise provided for.

S&F galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails, straning bolts including seucring of type at crossings with and provion of galvanised mild steel wire staple or steel pin etc including dismantling the existing barbed wire etc complete all as specified and directed

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

M&L preparation of new or previously untreated steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enemel paint over a coat of red oxide.

M&L Machine Pre cast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 grade with grey cement and pigment as in ramps/Hardstandings complete all as specified and directed.

M&L for 75 mm thick, PCC 1:3:6 type C1 (using 20mm graded stone aggregate), finished even and and fair as in plinth protection incl joints filling complete all as specified.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar incl removal of debries out side MD land.

M&L 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs,pillars, window cills, cooking platforms and like in cement mortar (1:4), 15mm thick including pointing in white cement (1:2) using marble dust with admixture of pigment to match with the granite complete all as specified and directed

M&L in repairs kitchen cabinets, cupboards etc of openable shutters, shelves partitins, drawers etc made up of 20mm solid core ply finished with 1mm veneer ply on both faces, each shutter having a pair of self closing hinges, stainless steel fancy handles, tower bolt and other fittings as directed, taking down old cabinets, S&F solid wood frame complete all as specified and as directed. Note - 1. Surface area of each member is measured flat for payment. 2. S&F of all necessary hardware deemed to be inclusive in quoted rates.

Taking down chowkat or frames with shutter (without taking off shutters from the frame)n. exc 1.5 sqm complete all as specified and directed.

Taking down chowkat or frames with shutter (without taking off shutters from the frame) exc 1.5 sqm but n.exc 4 Sqm etc complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube and fixing in position with hold fast, complete all as specified and directed. (Cost of hold fast included in the unit rate of this item.)

M &L factory made solid pannel PVC door shutter 30mm thick (style) consisting of frame made out of MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck in side with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame wedded /sealed to the styles and rails with suitable PVC sheet beading and joined together with solvent cement supplying and fixing in the frame at side,including two Nos tower bolts/ Handles for each shutter as per specification and drawing upto complete all as specified and as directed.

M&L for 105x60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed.

M&L for providing cement concrete type B-0, 1:3:6 ( 20 mm graded agg)as in coping, bed plates for angle iron, filling in frames etc complete all as specified and as directed.

S&F 40 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

S&F 35 mm thick Iind class hard wood glazed and skelton shutters open rebated and prepared to receive glass, gauge etc, divided into squares with plain, chamfeerd or rounded mittered and rebated sash bars any numbers edges of framing plain chamfered complete all as specified and as directed.

M&L preparation of new previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying a coat of synthetic enamel paint over a coat of pink primer complete all as specified.

M&L preparation of old previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying a coat of synthetic enamel paint over a coat of pink primer complete all as specified.

M&L preparation of old previously untreated steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described and applying a coat of synthetic enemel paint over a coat of red oxide.

S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hold fasts; wall ties; and similar small articles conforming to Fe-290 Gde-E-165

S&F stainlees steel 304 grade polished 150mm door handles with stainless steel screws all as specified and as directed.

S&F stainlees steel 304 grade polished 150mm tower bolt with stainless steel screws all as specified and as directed.

S&F stainlees steel 304 grade polished 250mm sliding door bolt with stainless steel screws all as specified and as directed.

S&F mild steel 300 mm ordinary rat tail rod pattern springs including roller and roller plate complete (Helical door spring) including welding to steel chowkhats if required all as specified.

S&F stainless steel 100 mm butt hinges for doors complete all as specified.

S&F in sheet glass ordinary quality 3mm thick in square not exc 0.50 Sqm each pane glazing with oil putty, clip in metal frame and wooden beading incl Hacking out old broken glass (any thickness, size, quality or description) from wooden or metal frame including punching or drilling out old glazing pins/spring clips all as specified.

S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperature 1.4 mm and fixed with stainless steel wire staples all as specified and as directed.

S&F framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikers framed guard bars, barred iron doors, hollow section doors, ladders; framed balusters walk ways railings framework of watertanks and similar work conforming to Fe-290 Gde-165.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles

M&L precast cement concrete 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in block masonry with solid blocks, exc 10 cm in width and setting in mortar complete 1:6

Taking down cement plaster on brick or stone walls or concrete ceiling etc, incl raking out joints, hacking for key scrubbing down with water, etc. complete all as specified and directed.

M&L rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 incl finished even and smooth (without using extra cement) complete all as specified and directed.

M&L rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 incl finished even and smooth (without using extra cement).

M&L preparation of old decorated/painted surface of ceiling and apply a coat of white washing including cleaning of splashes of white wash on floor/objects etc all as specified.

M&L preparation of old decorated/painted surface of walls and apply a coat of white washing including cleaning of splashes of white wash on floor/objects etc all as specified.

M&L preparation of old plastered surfaces of walls and applying coat of distemper oil emulsion all as specified and as directed.

M&L Complete removal of existing treatment of old surfaces of walls and applying a two coats of distemper oil emulsion incl 1mm thick wall putty and priming plastered and other surfaces with alkali resistant priming paint on plastered surface complete all as specified.

M&L preparation of newly plastered surfaces of wall and applying two coats of distemper oil emulsion white or tint over primer with 1mm wall putty on plastered surface complete all as specified.

M&L preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of primer surface

Preparing surfaces old plastered surface of walls and applying two coats of cement based paint over, including stopping of nails holes, filling of crack etc and cleaning all windows panes from splashes/droppings complete all as specified.

Supply and laying of 20 mm dia CPVC pipe SDR 11 & plain CPVC SDE 11 fitting on wall/ceiling or laying in tfloors Iincluding taking down old tubes 20mm dia, complete all as splecified.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in stone walls complete all as specified and as directed.

S&F in CPVC brass treaded elbow 20 mm fixed with all as specified.

S&F CPVC brass treaded Tee 20 mm all as specified.

S&F viterous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests Squatting pan orrisa pattern including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor including trap set in and including concrete.

S & F in repair vitreous china washdown water closet pan & trap (pedestal pattern) with plastic water closet seat black closet pattern with flat bottom and cover and mild steel chromium plated or aluminium hinginng device with flush pipe to pedestal pan incl all joints incl connection to drain pipe and flush pipe.

S&F in repair viteous china black top wash hand basin 545x545x185 and including one number brass CP waste cuupling, waste pipe 32mm dia brackets including cutting for and pinning in ends of brackets etc fixed on granite plateform complete all as specified

S&F in repair PVC low level flushing cistern 10 ltr capacity, valveless, syphonic action type with inlet, ball valve float and handle incl brakcet and flush pipe 32 mm dia complete all as specified.

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S & F in repair vitreous china white wash hand basin flat back size 550x400 mm incl brackets chain & plug and waste pipe waste coupling 32mm dia etc.

S & F PVC connection 15 mm dia with PTMT nuts of lenth 450 mm.

S&F 32 mm dia PVC waste pipe for WHB complete all as specified.

S&F in repairs angle valves male/female threaded 15 mm nominal bore, brass, fancy type, chromium plated, screwed down, high pressure with Capston head, screwed ends for iron/CPVC pipes or for unions complete all as specified and directed.

S&F in repair 15 mm bore Fancy type Bib taps, cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed.

S&F in repair 15 mm bore Fancy type Bib taps adjustable body, suitable for kitchen sink, cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed.

S&F in repair 15 mm bore pillar taps, cast copper alloy, fancy type with capstan heads, chromium plated screwed down high pressure with or without lattered 'Hot' or 'Cold' with long screwed for iron pipe and fixed.

S&F in repair Brass chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified

S&F in repair brass chromium plated tubular towel rail 20 mm dia, D type 60 cm long between flanges

S&F shelf of PTMT fixed with and incl Chromium plated brass screws and wooden/plastic cleats (Min wt 300 gms)

S&F chromium plated grating 100/75 mm dia circular with centre hole/ without hole of approved make and fixing with cement mortar 1:3 on Nahani trap or floor trap complete all as specified.

S&F 1000 Ltr rotational moulded poly-ethylene water tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part-I including dismantling of tanks all as specified.

S&F 20 mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed, (Min wt 210 gms)

S&F CPVC tank adaptor 20mm dia.

S&F in repair PVC (SWR) pipes 75 mm size in bore single socketed , in any length with rubber ring joints, fixed to walls including dismantling and breaking of pipe and fittings complete all as specified and as directed.

S&F in repair PVC (SWR) pipes 110 mm size in bore single socketed , in any length with rubber ring joints, fixed to walls including dismantling and breaking of pipe and fittings complete all as specified and as directed.

Demolition of Reinforced precast cement concrete manhole cover slab of any description and in any position including and segregation of reinforcement etc

S&F Pre cast RCC (1:2:4) type B1 for cover slab for man holes and set in cement mortar (1:6)

M&L for mildsteel deformed ,TMT bars 6 to 8 mm cut to length bend to shape require including cranking hooping ends binding in & wine annealed not less than 0.9 mm dia or securing with clips all as specified and as directed.

S&F assembled ready to use stainless steel grade 304, kitchen plate rack inlcuding top/middle shelves of 1.0mm thick sheet, square hollow supports, including bottom hooks, spoon holes, front and back open, size 915x915mm as approved and specified.

S&F PVC (SWR) bends 75mm any radius

S&F PVC (SWR) bends 110mm any radius

S&F in repairs Stainless steel curtain rod heavy duty 25mm dia with and including a pair of chromium plated bracket and end knob, polished all as specified .

Taking down copper / aluminium point wiring ( light, fan, socket or power) complete, including fitting & fixtures such as switches, ceiling roses, pendants, regulators, sockets , light fitting etc. removing materials to store for keeping in safe custady or for taking credit ( credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

Taking down unserviceable main switch/DB, Teak wood boards etc

M & L for point wiring with 1100 Volts grade 1.5 sqmm PVC insulated FRLSH unsheated cable with multistandred copper conductor conforming to IS: 694:1990 (for Phase, Neutral and and Earth) in and including Non metalic PVC rigid condiut medium grade with ISI mark of appropriate size with all accessories in wall/ ceiling/floor etc, concealed / open as required at site with GI flush in box/terminal boxes of sutaible size, including front plate for mounting of modular switch/ socket and combined cover plate with fitting screw washer, including cutting chasses in wall/floor/roof for fixing of conduit and flush in box and making good the distributed surfaces matching with existing complete all as specified and as directed for following-

One light point controlled by one switch complete all as specified and as directed by Engr-In-Charge.

One fan point controlled by one switch complete all as specified and as directed by Engr-In-Charge.

One 3 pin 5 Amps socket outlet point on independent board complete all as specified and as directed by Engr-In-Charge.

One 3 pin 5 Amps socket point on the same board with other switches complete all as specified and as directed by Engr-In-Charge.

All as per item No 86 here in before but wiring with 2.5 sqmm unsheathed single core PVC insulated multistranded copper conductor for 3 pin 15 Amps socket outlet complete all as specified and as directed by Engr-In-Charge.

M & L switch piano, flush type single pole, one way 5 Amps complete all as specified and as directed by Engr-In-Charge.

M&L switch socket outlet 2in1, 3pin,5A complete all as specified and as directed by Engr-In-Charge.

M&L switch socket outlet 2in1, 3pin 15A complete all as specified and as directed by Engr-In-Charge.

M&L ceiling rose surface bakelite 65x50 mm two to three terminals complete all as specified and as directed by Engr-In-Charge..

S&F steped type electronic fan regulator flush type, 230 volt, AC complete all as specified and as directed by Engr-In-Charge.

S & F VTPN DB - Dobule Door made out of CRCA mild steel sheet flushed in wall, TPN 4 way with 200 Amp rated bus bar, 415 volt with PVC MCB blanking plate, stove enamelled for incorporated of MCBs, insulators and MCCB of capacity upto 125 Amps TP/FP etc, complete all as specified and as directed by engineer in charge

Supply and fixing MCCB FP 415 Volts 125 Amps, 16 KA complete all as specifed and directed by Engr-In-Charge.

S&F sheet metal enclosure (for DB's when MCBs to be used), Single pole and neutral double door, 8 way, 240 Volts complete all as specified and as directed by Engr-In-Charge.

S&F MCB Single pole, 240 volts 6 to 32 Amps complete all as specified and as directed by Engr-In-Charge.

S&F MCB Single pole and neutral 06 to 32 Amps, 240 Volts complete all as specified and as directed by Engr-In-Charge.

M&L submain wiring with 2 runs of single core 6 sqmm size PVC insulated unsheathed cable 1100 volts grade with multistranded copper conductor drawn through and including PVC conduit and its accessories including provision of one run of 6 sqmm PVC insulated single core unsheathed copper multistranded conductor cable as earth continuity wire complete all as specified and directed including taking down of existing submain wiring casing and caping/conduit type with 2 runs of 6 sqmm aluminium conductor complete all as specified and as directed by Engr-In-Charge.. Note :-2 runs of cable, one run of earth wire (copper cable) & one run of PVC conduit shall be measured as one running metre.

M&L submain wiring with 2 runs of single core 10 sqmm size PVC insulated unsheathed cable 1100 volts grade with multistranded copper conductor drawn through and including PVC conduit and its accessories including provision of one run of 10 sqmm PVC insulated single core unsheathed copper multistranded conductor cable as earth continuity wire complete all as specified and directed including taking down of existing submain wiring casing and caping/conduit type with 2 runs of 10 sqmm aluminium conductor complete all as specified and as directed by Engr-In-Charge.. Note :-2 runs of cable, one run of earth wire (copper cable) & one run of PVC conduit shall be measured as one running metre.

Supply and fixing surface mounted Mini Mirror light LED batten 2feet with extruded aluminium housing and robust construction 10 W system lumen with all accessories if required flexible copper 2 core wire from fitting to ceiling rose all as specified and directed by Engr-in-Charge.

Supply and fixing surface & wall mounted LED batten 4feet with extruded aluminium housing and robust construction 20 W system lumen including flexible copper 2 core wire from tube light fitting to ceiling rose required length with all accessories all as specified and directed by Engr-in-Charge.

S&F in replacement building protection light fitting to be mounted on pole type bracket of minimum 35 Watt, 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, corrosion resistant including optics for scattering light complete all as specified and directed by Engr-In-Charge.

Taking down unserviceable ceiling fan, wall mounted fan, cabin fan, exhaust fans etc of any type and size from position, disconnecting electric supply, repair/replacement of unserviceable items, including cleaning oiling/greasing,tightening of nut bolt and refixing matching with existing. complete all as specified and directed by Engr-In-Charge.

Supply, laying, testing and commissioning of LT under ground cable XLPE in repair insulated armoured, heavy duty, elelctric cable, size 25 Sqmm 4 Core with stranded aluminium conductor, 1100 Volts grade conforming to IS -7098 (Part-I) 1988 fixed with saddle and clamps complete with cable ends connection with proper thimbles nut bolts washer including taking down of existing cables Complete all as specified and as directed by Engr-In-Charge.

Supply and laying 25 mm GI pipe fitting tubes medium grade galvanished with all fittings complete laid in trenches including taking down the old unserviceable GI pipe from trenches Complete all as specified and as directed by Engr-In-Charge.

Supply and laying 20 mm GI pipe fitting tubes medium grade galvanished with all fittings complete laid in trenches including taking down the old unserviceable GI pipe from trenches Complete all as specified and as directed by Engr-In-Charge.

S & F of float valves of size 20 mm and as reqired at site as complete brass fitting with rod and plastic ball Complete all as specified and as directed by Engr-in-in Charge.

S & F gun metal gate valve with inner wheel head, screwed both ends in iron pipe and fixed of Size 20 mm Complete all as specifed and as directed by Engr-In-Charge.

M & L earthing complete with GI earth plate Electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth plate not less than 2.25 Metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level connected to galvanished earth wire 4.0 mm dia by means of bolts, nuts check and washers of G I or steel all as shown in electrical plate No. 3 of SSR Pt -I connected to earthing test point all as specified or indicated including GI pipe 15 mm dia light grade for earth wire protection, 20 mm dia GI pipe medium grade for watering purpose,necessary excavation, earth work in any type of soil, PCC chamber and RCC cover slab, connecting lead wire from test point to DB complete all as specified and as directed by Engr-In-Charge.