REPAIRS TO TEMP ROOF FLOORING DADOS FLASE CEILING JOINERY ALUMINIUM DOOR AND WINDOW INTERNAL WATER SUPPLY SURVICE TANK CLEANING AND CONNECTED ITEMS IN POL AREA UNDER AGE B/R (SOUTH) NO I OF GE (SOUTH) SECUNDERABAD

Amount

Dismantling of AC sheets (corrugated and semicorrugated etc ) in roofing incl ridge tiles.

M&L 6mm thick asbestos cement, corrugated or semi-corrugated sheets with one and half corrugation side lap, fixed with 'J' type or 'L' type or cranked hook bolts in roofs, walls etc.complete all as specified and directed

M&L 6mm thick AC two piece adjustable serrated ridge for corrugated sheets in roofs fixed with 'L' or 'J' type in cranked hooks bolts all as specified.

S & F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified.

S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified.

Dismantling mild steel/wrought iron work of any description not otherwise provided.

S&F MS flat iron wind ties including securing bolts etc complete

Fixing only MS flat iron wind ties including securing bolts etc complete

M&L Preparation of new steel surfaces of any description, n exc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide. complete all as specified and directed.

Dismantling of wall and ceiling boards (fibre pulp insulation etc) or insulation boards / slabs /blankets any thickness, including cover fillets.

M&L for providing false ceiling with anodised aluminium snap grid frame work with size of grid 605 x 605mm with aluminium main tee size 25 x25 x 1.2mm, cross tee of size 25 x 25 x 1.2mm and aluminium wall angle of size 25 x 25 x 1.2mm fixed to walll hanging from soffits\trusses\bracing using adjustable supporting hanger comprising of GI wire complete all as sepcified and directed by Engr-In-Charge.

M&L perforated particle board/tiles 12 mm thick for insulation and accoustic purposes, 60 x 60cm in size fixed with nails to timber frame work or with staples on snap grid and preparing surface, applying two coats of OBD over a coat of primer. complete all as sepcified and directed by Engr-In-Charge.

S&F 12.5 mm thick gypsum board false ceiling fixed with standard GI section such as channels, angles the grid suspended with GI suspender and cleat from soffit of slab with expension fastners. Gypsum board shall be fixed with screwed to the ceiling section/grid. The board shall be 12.5mm thick and the soffit of board shall be finished with gypsum plaster and levelled to give flush look as per manufacturer's instructions and applying two coats of oil bound distemper over a coat of primer.complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherewise specifically provided including removal of old treatment of any description complete all as specified and as directed.

M&L rendering 15mm thick in CM 1:3 on brick work or concrete surfaces, mixed with integral water proofing compound as per manufactures instructions, finished the surface even and smooth without using extra cement and applying evenly a tack coat of blown bitumen 85/25 @ 1.2 Kg/Sqm over a coat of water based bitumen emulsion primer at the rate of 0.30 Kg/Sqm including cleaning the surfaces thoroughly from dust and dirt and lay water proofing treatment with felt having glass fiber non woven reinforcement and weighing 3.0 Kgs/Sqm to 4.0 Kgs/Sqm in 100mm overlaps both longitudinally and transversely by torch bounding over a coat of blown bitumen 85/25 @ 1.2 Kgs/Sqm on top of felt as in sunken floor (bottom and vertical) complete all as specified and as directed.(Note : Supply of water proofing compound will be measured and paid separately .)

M&L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in filling of sunken portion etc complete all as specified and directed. .

S&F in repair High density polyethylene pipe (HDPE) 40mm bore of pressure rating 6kg/cm2 fixed to wall, ceiling or laid in floor etc complete all as specified and directed.

Supply only integral water proofing compound.

Demolition of cement concrete in ground floor and paving n exc 15 cm thickness below and above ground level

M&L for 75 mm thick PCC 1:4:8 type B2 using 40mm graded stone aggregate as in sub base of floor etc complete all as specified and directed.

M&L for 25 mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregate as in level course on floor etc complete all as specified and directed.

M&L for 15 mm thick screed bed in cement mortar 1:6 for laying floor finishes under floor complete all as specified

M&L for non skid coloured tiles 7 to 8 mm thick area of each tile exceeding 0.06 Sqm but not exc 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match.

M&L for non skid coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 Sqm but not exc 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match.

All as per Sl item No 24 above but in vertical surfaces such as skirting/dado etc complete all as specified.

M&L for vitrified ceramic tiles, area of each tile not exc 0.36sqm , 10mm thick (square or rectangular) of superior quality as in floor surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed.

All as per Sl item No 26 above but in vertical surfaces such as skirting/dado etc complete all as specified.

M&L Machine cut polished shahbad stone slab flooring 20-25mm thick as in flooring, etc and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc over 20 mm thick screed bed in CM 1:6 complete all as specified and directed by Engr-In-Charge.

M&L machine cut polished shahbad stone slab 20 -25 mm thick in riser of steps ,skirting ,dado and piller laid over rendering 15 mm thick in CM 1:4 and jointed jointed with grey cement slurry mixed wirh pigments to match the shade with ditto as per specified and directed.

M&L for machine cut cudappah polished slabs stone of thickness 25 to 30mm thick, over 20 mm thick cement screed bed in cm 1;6 laid and jointed with grey cement slurry mixed with pigment to the match the shade of the slab including rubbing and polishing complete all as specified.

Dismantling floor hearth or wall tiling including cement mortar bedding but not backing.

M&L rendering 10mm thick on fair faces of brick work or concrete surface in CM 1:4 on vertical surfaces/backing coat.

M&L for glazed ceramic coloured tiles of size 300x200mmx7mm thick, on vertical surfaces, set and jointed in neat cement slurry and pointed in coloured cement to match.

M&L for Glazed ceramic coloured tiles of size 450x300x7mm wall tiles set and jointed in neat cement and in white/coloured cement to match with the colour of tile etc, complete all as specified and directed

M&L for 40 mm thick for PCC (1:2:4) type B1 20 mm graded stone aggregate as in flooring finished even and smooth with using extra cement .

M & L for cement concrete 1:3:6 type B-1, 75 mm thick using 20mm graded stone aggregates as in plinth protection finished fair and even without using extra cement.

M&L for chequered cement concrete tile 300 mm x 300 mm x 25 mm thick set jointed and pointed in neat cement slurry in floor with grey cement and pigment and including 20 mm thick screed bed cement mortar 1;6 all as specified and directed.

Demolition of brick work or stone masonry built in cement mortar, or cement line mortar including all quoins, arches pillars etc.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM 1:6. complete all as specified.

M&L brick work with sub class B bricks straight or curved on plan to any radious in half brick thick walls built in CM 1:4. complete all as specified and directed.

Taking down cement plaster and raking out joints, hacking for key,scrubbing down with water built in cement mortar complete all as specified and directed

M&L for rendering 15mm thick in CM 1:6 on fair faces of brick/concrete finished even and smooth without using extra cement complete all as specified and directed

M&L Rendering 5 mm thick in CM 1:3 on fair faces of concrete as in ceiling surfaces even and smooth without using extra cement. all as specified and as directed by Engr -in - charge

M&L for preparation of new plaster surface of walls and applying two coats of oil bound distempers over one coat of primer and two coat of wall care putty complete all as directed by Engr-in-charge.

M & L for preparation of new surfaces of wall and applying three coats of white wash complete all as specified and directed

M&L for preparation of new plastered or un- plastered surfaces and applying three coats of white wash on ceiling, chajja complete all as specified and directed.

M&L in repair 100mm long MS butt hinges for door, window and ventilitor with running welding including greasing and oiling complete all as specified and directed

Taking down frames with shutters (without taking off shutters from the frame) area not exc 1.5 Sqm Each incl iron mangery complete.

S&F PVC moulded door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing all as directed

supply and fixing factory made solid panel PVC door shutter 30 mm thick (style)consisting of frame made out of MS tubes for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site as per specification and drawing.

S&F Butt hinges, 100 mm size extruded aluminium alloy with galvanised mild steel hinge pin, anodised .

S&F steel window with pressed frame including side hung double shutters on both sides to receive glass on one side shutters and to receive gauze on other side shutters including hinges with steel handle on both side shutters and steel peg stay ,complete with glazing bars complete all as specified and directed

S&F for framed work such as grill, gratings, etc with ends of bars shouldered and/or riveted or forged in to spikes, framed guard bars, barred iron doors ladders framed balusters and similar work conforming to Fe 290 Gde E-165 all as specified and directed.

S&F steel Ventilators with top hung/side hung shutter including hinges steel peg stay, complete all as specified and directed

M & L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer up to four storey height .

M & L for preparation of new steel surfaces and applying two coats of synthetic enamel.

S&F in repair galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks and GI wire staples.

M&L sheet glass 3mm thick ordinary quality and glazing with oil putty in square n.exc 0.5 Sqm in Each pane

M&L for sheet glass 3mm thick figured glass, pin headed type and glazing with oil putty or wooden beads not exceeding 0.5 Sqm in Each pane complete all as specified and directed

Hacking out old broken glass from metal frame, including cleaning and removing old putty clip etc and S&F of sheet glass 3mm thick ordinary quality and glazing with oil putty in square n.exc 0.5 Sqm in Each pane complete all as specified and directed

Taking down frames with shutters (without taking off shutters from the frame) area exc 1.5 Sqm but n.exc 4 Sqm Each incl iron mangery complete.

Taking down shutters of any description exc 1 sqm but n exc 2 sqm each complete all as specified and as directed.

Material & labour 2nd class hardwood plain, solid straight chowkhats and frames, wrought, framed rebated on the solid,rounded or chamfered, puttogether with glue pinned at joints, 2nd class HW.

S&F for Factory made 35mm thick 2nd class hard wood, plain framed, paneled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both sides, the side of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, 35 mm thick complete, all as specified and directed by Engr-in-Charge.

S&F 35mm thick 2nd class hard wood factory made glazed and skeleton shutters open rebated and prepared to receive glass/gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass and gauge etc.

S&F 35 mm thick flush shutter ,solid core construction ,with block board core and plywood face panels ,commercial type complete all as specified and as directed.

S&F Mild Steel flat iron 25 x 3mm as in hold fast including black tarring complete all as specified and directed

M&L PCC for hold fast, coping and similar work using B0 1:2:4 (12.50mm graded stone aggregate) including necessary form work complete all as specified and directed

M & L for preparation of new wooden surfaces of any description ,not other wise described over 10 cm width or girth applying two coats of synthetic enamel paint over a coat of primers complete all as specified and directed

S&F in Repairs for prelaminated particle board of 18/19mm thick interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with timber frame work of cupboards book cases etc complete all as specified and as directed.

M&L 2nd class HW plain fillets square ,rectangular or triangular in section clean sawn ,secured with nails or brads exc 3 sq cm but n exc 6 sqcm.

M&L 2nd class HW plain fillets square ,rectangular or triangular in section clean sawn ,secured with nails or brads exc 13 sq cm but n exc 25 sqcm.

S&F hasp & staple 100mm size aluminium anodised fixed with screws.

S&F continous (Piano) hinges , mild steel, bright finished or electrogalvanised width of flaps in 30mm

S&F 40mm dia cupboard knobs fixed with nuts screws and washers of brass polished of approved quality complete all as specified and as directed.

S&F 150mm long Aluminium anodised barrel tower bolt of extruded section .

M&L 150 mm length Aluminium handles fabricated type anodised

S & F 100mm size mild Steel butt hinges medium weight cold rolled.

S & F 300 mm long aluminium alloy anodised sliding door bolt with hasp staple (bolt type ) and fixing clips of sheets ,cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed .

S&F 300 mm ordinary rat rail rod pattern spring including roller and roller plate complete

S&F floor door stoper (140mm length) of aluminium alloy body complete.

S&F in repair rotational moulded polyethylene water storage tanks 500 ltrs(cylindlerical verrtical with closed top) hoisted and fixed in position all as specified in SSR part I inclding dismantaling of existing damaged water tanks.

S&F in repair rotational moulded polyethylene water storage tanks 1000 ltrs(cylindlerical verrtical with closed top) hoisted and fixed in position all as specified in SSR part I inclding dismantaling of existing damaged water tanks.

S&F in repair rotational moulded polyethylene water storage tanks 2000 ltrs(cylindlerical verrtical with closed top) hoisted and fixed in position all as specified in SSR part I inclding dismantaling of existing damaged water tanks.

S&F PTMT ball valves 20 mm dia high pressure with epoxy coated aluminium rod and high density plastic ball screwed for iron pipes and fixed to iron pipes.

S&F in repair PTMT ball valves 20 mm dia high pressure with epoxy coated aluminium rod and high density plastic ball screwed for iron pipes and fixed to iron pipes.

S&F in repairs Gun metal globe or gate valves high pressure with polythene float and fly nut complete screwed for iron pipe or for unions of 20 mm bore and complete all as specified and directed.

S & F steel tubing galvanized, medium grade with all fittings, laid in floors or fixed to walls,15mm bore.including taking down old pipe complete all as specified and as directed.

S & F steel tubing galvanized, medium grade with all fittings, laid in floors or fixed to walls, 20mm bore.including taking down old pipe complete all as specified and as directed.

S&F in repairs Bib taps 15mm standard of PTMT and any colour screwed for iron pipe and fixded.

S&F in repairs pillar taps 15 mm dia of PTMT any colour screwed for iron pipe and fixed .

S&F in repairs stop valve 15 mm dia of PTMT any colour high pressure scrrewed for iron pipe and fixed .

S&F in repairs angle valve 15 mm dia of PTMT any colour high pressure scrrewed for iron pipe and fixed .

S&F in repairs swivel shower of PTMT any colour for fixing with 15 mm pipe (Min weight 40 gms)

S&F in repair 40 mm waste coupling of PTMT ( half or full threaded) (Min weight 60 gms) all as specified and directed.

S&F in repairs 40 mm dia PVC waste pipe for sink and wash hand basin of pressure rating 10 kgf/Sqm complete all as specified and as directed.

S&F in repairs PVC (SWR) Floor trap, 75 mm dia of outlet, plain with grating including jointing with solvent cement including removing old trap and making good. All as directed by Engr-in-charge.

S&F in repair flush pipes of polyethylene for low level cistern 32 mm dia for water closet including all joints and making good to the floor.

S&F in repairs PVC connection 15mm dia and 45cm long with two Nos of PTMT checknuts and washers complete.

S&F in repairs 600mm long tubular towel rail brass chromium plated 20mm dia, D type 60cm long fixed with two plugs (Gutties) of 2nd class hard wood embeded in cement mortor 1:3 with MS screwscomplete all as specified.

S&F in repairs PVC bathroom cabinet with door fitted with looking mirror as per sample approved and all as directed by Engr-in-charge.

Supply and fixing in repairs vitreous china squatting pan,Orrisa pattern of size 580mmx440mm white with integral foot rests excluding flushihng cistertn and flush pipe complete all as specified

S&F in repair Vitreous china ware wash down water closet pan, (pedestal pattern) coloured including connection to drain and to flushing pipe, anti syphonage pipe etc.complete all as specified

S&F in repair WHB vitreous china (flat back or angle back type) any size ,including cutting for pinning in ends size 550x400 mm including brackets ,32 mm CP waste fittings coupling ,connection pipe 450mm long and 15mm dia CP pillar taps fancy type.

S&F in repairs10 ltrs capacity PVC valveless syphonic action type flushing cistern low level with inlet ball valve float and handle complete all as specified .

S&F in repair vitreous china bowl urinal flat back, size 465x355x265 mm white (min) with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe)

S&F in repairs Plastic water closet seat, black or white closed pattern, solid type with flat bottom, and cover and mild steel chromium plated hinging device complete all as specified and as directed.

S&F in repair pillar tap 15mm dia cast copper alloy with capstan head ,chromium plated screwed down high presure with or with out lettered fixed with iron pipe

S & F in repair stop valves cast copper alloy chromium plated with long shank (concealed), screwed both ends for iron pipe 15mm bore

S & F in repair bib taps cast copper alloy with crutch or butter fly handle screwed for iron pipe of dia 15mm fixed .

S&F in repairs 20mm dia aluminium anodised tubular curtain rail with brackets all as directed by Engr-in-Charge

S&F in repairs 125 mm dia brass chromium plated shower rose with swivel joints complete all as specified and as directed.

S&F in repairs sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratary with plugs washer and wastes including bedding in cement mortar to drawf wall or including fixing cantiliver brackets and connecting union to pipes overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm.

S&F in repairs for stainless steel plate rack of size 1200x900mm of approved make and quality complete all as specified and as directed by Engr-in-Charge.

S & F for health faucet fixed in repair all as directed by Engr in charge.

S&f in repairs to PVC water tank cover 500 ltr to 1000 ltrs approval quality all as directed by Engr -in -charge .

Disconnecting existing tanks of exc 500 but n exc 750 ltr capacity setting aside (or lowering if required) for repairs, cleaning, etc and hoisting if required reconnecting and re-fixing in position with cleaning and removing all scale and dirt, etc from tanks and from mouths of circulating pipes etc.

Cleaning of RCC/PVC water tanks with bleaching powder disconnecting the connection & removing all scales and dirt etc from tanks & from mouth of circulating pipes etc including writing with paint out side tanks " tank cleaned on with month and year " capicity of tanks exc 250 & n exc 500 ltrs and recconneting ,air lock complete all as specified.

Cleaning of RCC/PVC water tanks with bleaching powder disconnecting the connection & removing all scales and dirt etc from tanks & from mouth of circulating pipes etc including writing with paint out side tanks " tank cleaned on with month and year " capicity of tanks exc 500 & n exc 750 ltrs and recconneting ,air lock complete all as specified.

Cleaning of RCC/PVC water tanks with bleaching powder disconnecting the connection & removing all scales and dirt etc fromtanks & from mouth of circulating pipes etc including writing with paint out side tanks " tank cleaned on with month and year " capicity of tanks exc 750 & n exc 1000 ltrs and recconneting ,air lock complete all as specified.

M/S DIVIJA BUILDERS

BEEGEE DESIGN SYSTEMS