REPAIR TO SOFA SETS AND CERTAIN MISC STEEL WOODEN and TP FURNITURE ITEMS UNDER GE DIPATOLI

Amount

Sofa sets 4/5 seater FD-281 S&F New components of 1st class HW (Teak/shisham) including dismantling unservicable one all as specified and as directed. (a) Front Legs

(b) Rear legs

(c) Battens

(d) back rail (3 seater)

(e) Front rail (3 seater)

(f) Back rail (single seater)

(g) Front rail (single seater)

(h) Hand rest

(j) Providing new M & L cushion of 40 density cool foam of size 560 x 530x100mm thick duly upholstered with new tapestry cloth as approved (rate not less than Rs 400 /Mtr) complete all as specified and as directed.

(k) Providing new tapestry cloth cover for seat foam and back foam of sofa sets of approved shade & quality (as per sample held with office) with 04 nos velcrow duly stitched as directed for easy removing/closing purposes etc to cover the foam of size 560 x 530x100mm thick Cost of tapestry cloth shall not be less than Rs 400/- per meter. complete all specified and as directed.

Preparation of sufaces of following sofa set by throughly rubbing with emery paper, applying raw/burnt seina uniformly from sofa set and polishing with french polish one or more coat to obtain a glossy finish complete all as specified and as directed. (a) Sofa set 4 seater

(b) Sofa set 5 seater

Table 900 x 600 mm with/ without drawer FD- 223 & 224 S&F new components of 1st class HW (Teak/shisham) including dismantling unservicable one all as specified and as directed. (a) Leg

(b) Top rail (long/front)

(c) Top rail (short/side)

(d) Top18mm thick pre-laminated MDF board alongwith 4mm thick teak wood beading including dismantling unserviceable one all as specified and as directed.

(e) Drawer made of 12mm thick commercial plywood and front side made of 18mm thick pre-laminated MDF board including provision of knob completed all as specified and directed.

(f) Preparation of surfaces with sand/emery paper and applying french polish one or more coat of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax complete all as specified and as directed.

Table Dressing Gents with mirror FD-230 (a) S/F new Looking mirror with frame of 5mm thick of appropriate size with frame along with 6mm thick commercial plywood back of the mirror complete including dismantling unserviceable one all as specified and as directed.

(b) S & F new top/bottom of box made up of pre-laminated MDF board 18mm including dismantling unserviceable one all as specified and as directed.

(C ) S & F new both sides of box made up of pre-laminated MDF board 18mm including dismantling unserviceable one all as specified and as directed.

(d) Drawer made of 12mm thick commercial plywood and front side made of 18mm thick pre-laminated MDF board and provision of knob including dismantling unserviceable one all as specified and as directed.

(e) Preparation of surfaces with sand/emery paper and applying french polish one or more coat of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax complete all as specified and as directed.

Table Dressing Ladies with mirror FD-251 (a) Looking mirror with frame of 5mm thick of appropriate size with frame along with 6mm thick commercial plywood back of the mirror complete including dismantling unserviceable one all as specified and as directed.

(b) Drawer made of 12mm thick commercial plywood and front side made of 18mm thick pre-laminated MDF board one side laminated finish and provision of knob including dismantling unserviceable one all as specified and as directed.

(c) S &F new complete leg base as per drg including dismantling unserviceable one all as specified and as directed.

(c) S &F new twin aluminium channel fitted with glass shutter (02 nos) complete as per drg including dismantling unserviceable one all as specified and as directed.

(d) Preparation of surfaces with sand/emery paper and applying french polish one or more coat of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax complete all as specified and as directed.

Trestle store room wooden(FD-86) (a) S & F long rail of trestle made up of seasoned sal wood including dismantling unserviceable one complete all as specified, directed.

(b) S & F side stiffner of trestle made up of seasoned sal wood including dismantling unserviceable one complete all as specified, directed.

(c) S & centre stiffner of trestle made up of seasoned sal wood including dismantling unserviceable one complete all as specified, directed.

(d) S & leg of trestle made up of seasoned sal wood including dismantling unserviceable one complete all as specified, directed.

(e) M & L for preparation of old surfaces including minor repair wherever required and painting with two coats black enammeled paint complete all as specified and as directed.

Chair dining cushioned FD/E6/MAP/10 (R) S&F new components of 1st class HW (teak/shisham) including dismantling unservicable one all as specified and as directed. (a) Rear leg

(b) Front leg

(c) Side/back/front rails

(d) Stiffener

(e) Providing new 75mm Cushion with new tapestry cloth fixed with 12mm ply of appropriate size of 32 density cool foam complete with dismantling old one as per sample of tapestry held with this office,complete all as specified and as directed.

(f) New tapestry cloth cover for cushion of approved shade & quality as per sample held with office to cover the foam of appropriate size and dismantling old one,Cost of tapestry cloth shall not be less than Rs 400/- per meter. complete all as specified and directed.

Tightening of all parts/joints of whole Chair dining cushioned with bamboo pins, complete all as specified and directed.

(g) Preparation of sufaces of chair dinning cushioned by throughly rubbing with emery paper, applying raw/burnt seina uniformly from chair dinning and polishing with french polish one or more coat to obtain a glossy finish complete all as specified and as directed.

Chair visitors /Chair Writing MAP Trade Pattern (a) Chair visitors of different Make and Model (SEAT & BACK) and re-upholstering with new tapestry/ (approved quality) including dismantling of old one complete all as specified and dircted.

(b) Supply and Fix New SEAT & back (Cushion,tapestry & ply) 50mm thick cushion complete (approved quality) of different make and model including dismantling of old one complete all as specified and dircted.

(c) Supply and fix handle of chair visitors of (soft/PV) suitable size and design as per original Pattern of different Make and Model including dismantling of old one complete all as specified and as directed.

(d) M&L for painting two coats of Black paint in Iron frame of Chair Visitor of various Make & Models including scraping old painted/rusted parts by emery paper all as specified and as directed.

Book Case FD-45 (a) S & F new top made out of 18mm thick commercial plywood pasted with 0.8mm thick laminated sheet of approved shade including 4mm thick teakwood beading including dismantling unserviceable one all as specified and as directed. Note :- (i) Knob shall be aluminium anodized (dark brown chromium plated of approved size & quality). (ii) Hinges shall be 50 mm of approved quality.

(b) S & F Side portion of Book case made out of 18mm thick commercial plywood pasted with 0.8mm thick laminated sheet including 4mm thick teakwood beading including dismantling unserviceable one all as specified and as directed.

(c) S & F back made out of 6mm thick commercial ply wood including dismantling unserviceable one all as specified and as directed.

(d) S & F door shutter of book case made out of / 18mm thick commercial plywood pasted with 0.8mm thick plastic laminated sheet of approved shade hang on 02 Nos 75mm SS hinges including fixing of 75mm CP handle including dismantling unserviceable one all as specified and as directed.

(e) S & F new complete legs (Four legs along with rectangular wooden frame) made out of shisham wood including dismantling unserviceable one all as specified and as directed.

(f) Preparation of surfaces with sand/emery paper and applying french polish one or more coat of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax complete all as specified and as directed.

Table Dressing Ladies with Stool FD/MAP-II/07 (a) S & F new looking mirror with frame of 5mm thick of appropriate size with frame along with 5mm thick commercial plywood back of the mirror and minor repairs including dismantling unserviceable one all as specified and as directed.

(b) S & F drawer of dressing ladies run on 02 Nos telescopic channel including 50mm SS handle including dismantling unserviceable one all as specified and as directed.

(c) S & F door shutter of dressing ladies hang on 02 Nos SS hinges including magnetic catcher and 75mm SS handle including dismantling unserviceable one all as specified and as directed.

(d) S & F front side of stool including 75mm SS handle including dismantling unserviceable one all as specified and as directed.

(e) S & F new 75mm thick 32 density cushion with approved tapestry/latherire of stool including dismantling unserviceable one all as specified and as directed.

(f) S & F new heavy duty castor wheel as approved including dismantling unsercieale one all as specified and as directed.

(g) Preparation of surfaces with sand/emery paper and applying french polish one or more coat of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax complete all as specified and as directed.

Form without back (a)Supply and fixing in replacement of seat plank of form without back of size 1525 x 255 x 25mm thick of 1st class hard wood teak duly wrought both side painted including nuts, bolts & rubber shoes all as specified and shown on drg. (FD-77(M) & FD-1027) and directed.

All as per item No. 59 but size 1900 x 255 x 25mm. (FD-77(M) & FD-1027)

All as per item No. 59 above but seat plank of form with back of size 1800 x 255 x 25mm. (FD-78(M).

All as per item No. 59 but but back plank of form with back of 1800 x 150 x 19mm.(FD-78(M).

Supply and fixing in replacement of unserviceable portions of form with or without back with 25mm square conduit pipe of wall thickness 1.6mm duly electric welding complete all as directed by Engr-in-Charge. (FD-77(M), FD-78(M) &FD-1027)

M & L for spray painting to frame of form without back except seat planks with synthetic enamel paint of OG colour all as specified and as directed. (FD-77(M) & FD-1027).

Rack for records 6`x2`x 6` (a) S & F leg of size 1800x 65x65 mm of rack made up of seasoned teak/shisham wood including dismantling unserviceable one complete all as specified, directed.

(b) S & F Plank of rack of size 1800x150x20mm made up of seasoned Teak/shisham wood including dismantling unserviceable one complete all as specified, directed.

(c) S & F stiffner of rack of size 550x50x40mm made up of seasoned Teak/shisham wood including dismantling unserviceable one complete all as specified, directed.

(d) M & L for preparation of old surfaces including minor repair wherever required and painting with grey/White enammeled paint complete all as specified and as directed.

Y P ANAND

M/S SURYA BUILDERS

M/s Ray construction