PROVISION OF GD ROOM FOR 10 PERS WITH TOILET BLOCK AT GATE NO.02 OF 8 TH LIGHT CAVALRY AT MIL STN JASAI UNDER GE ARMY BARMER

Amount

Surface excavation not exceeding 30cm and averaging 15 cm deep and getting out in soft / loose soil complete all as specified and as directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 10 Sq.m on plan area and not exceeding 1.5m deep and getting out in hard rock by chiselling complete all as specified and as directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 10 Sq.m on plan area and depth exceeding 1.5m but not exceeding 3.0m deep and getting out in hard rock by chiselling complete all as specified and as directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 10 Sq.m on plan area and not exceeding 1.5m deep in any type of soil complete all as specified and directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 10 Sq.m on plan area and depth exceeding 1.5m but not exceeding 3.0m deep and getting out in any type of soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick of excavated soil complete all as specified and as directed.

Spreading and levelling in layers not exceeding 25cm thick , well ramming including watering as required as in under floors complete all as specified and as directed.

Moorum filling,spreading and levelling in layers not exceeding 25cm thick , well ramming including watering as required as in under floors complete all as specified and as directed. Note :- Approved moorum obtained from out side MD land shall be used.

Removal of excavated material [soils] to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed.

M&L PCC 1:4:8 type D2 by using 40mm graded stone aggregate as in foundations filling and mass concrete complete all as specified and directed.

M&L brickwork with fly ash bricks, straight or curved on plan exceeding 6m mean radius built in CM 1:6 complete all as specified and as directed.

M&L brick work with fly ash brick, straight or curved on plan any radius as in half brick thick walls built in CM 1:4 complete all as specified and as directed.

Use and waste formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide includingrough finished surfaces complete all as specified and directed.

RCC M-25 design mix as in beams, cantilevers, bressummers, lintels over 1.5m span etc complete all as specified and as directed.

M&L rendering 10mm thick in CM 1:6 on brick masonry surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L rendering 5mm thick in cement mortar 1:3 on concrete ceiling surfaces, finished even and smooth without using extra cement, complete all as specified and directed.

M&L rendering 15mm thick in CM 1:4 on brick masonry surfaces, finished even and fair without using extra cement including mixing with liquid water proofing compound complete all as specified and directed. NOTE :- liquid WPC shall be measured and paid separately under respective item.

Supply only liquid water proofing compound ( ISI Marked)

Preparation of new plastered or unplastered surfaces and applying three coats of white wash on walls complete all as specified and as directed.

Preparation of new plastered or unplastered surfaces and applying three coats of white wash on ceiling surfaces complete all as specified and as directed.

M&L 75 mm thick PCC 1:3:6 type C -1 using 20 mm graded stone aggregate laid in alternative bays as in plinth protection including finishing the surface even & fair & filling the joints with mastic filling i.e one part of bitumen 85/25 and 3 parts of sand by weight complete all as specified and as directed.

M&L 75 mm thick PCC 1:4:8 type D2 using 40mm graded crushed stone aggregate for sub base as in floor complete all as specified and as directed .

M&L for machine cut kota stone slab 20 to 25mm thick in floor laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including 20mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L for machine cut kota stone slab 18 to 20mm thick in riser of steps, skirting, dado and pillar laid and jointed with pigment to match the shade of the slab including rubbing and polishing complete over and including 10 mm thick backing coat in CM 1:4 complete all as specified and as directed.

M&L for makarana marble tiles 30cmx20cm x 20mm thick machine cut, bedded jointed and pointed with grey cement slurry including cutting and polishing complete over and including 20mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L 40mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in floors and finishing the surface even and smooth with using extra cement complete all as specified and as directed .

Forming square grooves in plaster n exc 12mm deep and n exc 15mm on face complete all as specified and as directed .

Preparing new or previously untreated wood and wood based surfaces of any description otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint (Ordinary tint) over a coat of pink primer complete all as specified and as directed.

Use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick [horizontal or sloping] including rough finished surfaces complete all as specified and directed.

RCC M-25 design mix as in slabs supported on walls, beams and colunms in floors,roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L TMT steel bars of 10mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping, hooking ends and binding with annealed mild steel wire not less than 0.9mm dia or securing with clips or welded complete all as specified and as directed.

M&L TMT steel bars of 6 to 8 mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping, hooking ends and binding with annealed mild steel wire not less than 0.9mm dia or securing with clips or welded complete all as specified and as directed.

M&L TMT steel bars of 5mm to 10mm dia bars as in stirrups, spacers and binders, cut to length, bent to shape required including cranking, bending, spirally for hooping, hooking ends and binding with annealed mild steel wire not less than 0.9mm dia or securing with clips or welded complete all as specified and as directed.

Use and waste of form work to sides and soffits of lintels, beams, brackets, shelves and similar works for rough finished surfaces of concrete complete all as specified and as directed.

Use and waste of form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits [if any] of foundation and plinth beams and similar work, vertical or to batter for rough finished surfaces complete all as specified and as directed.

RCC M-25 design mix as in foundations including rafts, footings, foundation beams, plinth beams, bases for columns etc complete all as specified and as directed.

Use and waste of form work to sides of pillars, posts, struts, piers, columns and stanchions of any shape / cross section for rough finished surfaces of concrete complete all as specified and as directed.

RCC M-25 design mix as in columns, pillars, piers, posts and struts etc complete all as specified and as directed..

APP based polymeric membrane minimum weighing not less than 3kg / Sqm and minimum 3mm thick reinforced with polyester non woven fabric weight not less than 150 gms / Sqm and on primed surface of one coat of approved bituminous [email protected] Ltr per Sqm by torch application method complete all as specified and as directed .

S&F Factory made steel windows ( glazed) with side hung shutters including box type hinges with steel handle and steel peg stay complete with glazing bars, dovetailed or welded all as specified and as directed.

S&F Factory made steel windows (gauzed ) with side hung shutters including box type hinges with steel handle and steel peg stay complete with out glazing bars, dovetailed or welded all as specified and as directed.

S&F Factory made steel ventilators with top hung shutters including box type hinges, steel peg stay complete all as specified and as directed.

M&L rolled mild steel sections like angle, channel, flat, square etc as in framed work such as grills, gratings, etc, with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars ,barred iron doors; ladders ;framed balusters walk ways railings framed work of water tanks and similar work confirming to Fe-290Gde E-165 complete all as specified and as directed.

Preparation of new or previously untreated steel surface of any description, over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red- oxide, zinc chrome primer complete all as specified and as directed.

S&F for sheet glass 3mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sq.m in each pane complete all as specified and as directed.

S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

M&L factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strips of 20mm width stuck inside with solvent cement for tiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed the stiles and rails with suitable PVC Sheet beading and jointed together with solvent cement supplying and fixing in the frame at site all as per specification and drawing in SSR Part-II , complete all as specified and as directed .

M&L solid PVC door frame of size 50 x 47mm made out of 5mm plain colour PVC sheet re-inforced with M.S. square tube supplying and fixing in opening all as specified as per SSR Part-II, complete all as directed .

S&F aluminium anodised barrel tower bolts of extruded section of 200 mm size complete all as specified and as directed.

S&F 150mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

M&L PCC 1:2:4 25mm thick type B-0 by using 12.5mm graded crushed stone aggregate in base for floors complete all as specified and as directed.

M&L Non Skid ceramic tiles, coloured, of size exceeding 0.06 Sq.m and not exceeding 0.11 Sq.m, 7 to 8 mm thick [Square or Rectangular] as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 complete all as specified and as directed.

M&L Glazed coloured ceramic tiles of size 450mmx350mmx7mm/ 450mm x 300mm x 7mm thick on vertical surface such as dado/ skirting etc., over and including 10mm thick backing coat in CM 1:4 set and jointed in neat cement slurry and pointed in white cement / coloured cement to match the tiles complete all as specified and as directed.

S & F 125 mm X 60 mm size pressed steel frames for door with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc as specified

M&L factory Made flush shutters, 35 mm thick solid core with particle board core construction as per IS 2202(part-I, 1999) . The stiles & rails shall be with out any joint and made with non- coniferous timber hard wood (Hillock/ Mirantee/ Bosum/ Benteak) with moisture content not less than 12% as per IS. The face panel comprising of ply wood or cross band and face veneers shall be glued by hot pressed process. The over all finished thickness of face panel shall not be less than 35mm while the thickness face veneer shall not be less than 0.6 mm complete all as specified and directed.

M&L 35mm thick factory made 2nd class HW glazed and skelton shutter and open rebated and prepared to receive glass, gauge etc (without sash bars), edges or framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR Part-I Section 8 Clause 8.24 (a) complete all as specified and as directed.

S&F 300 mm length aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and as directed .

S&F100mm size butt hinges, medium weight, cold rolled mild steel, complete all as specified and as directed.

S&F 140 mm floor door stopper of aluminium alloy body and tongue , anodised ,with hard drawn steel spring ,fixed in floor, complete all as specified and directed.

S&F vitreous china ware wash hand basin, white, flat back of size 550 mm X 400 mm including 32 mm dia brass chromium plated waste fittings with long screw shanks and fly nuts, flange end bedded in red led cement and other end fixed, rubber plug with rings including CI Brackets, cutting for and pinning in ends of brackets or erecting strand, 32mm bore PVC flexible waste pipe,PVC connection15mm size with PTMT nuts of length 450mm long including pillar tap, cast copper alloy, chromium plated, 15 mm dia, with capstan head, screwed down high pressure with or with out lettered "Hot" or "Cold" with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and as directed.

S&F of PVC (SWR) 110mm bore floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.

S&F of PVC (SWR) 75mm dia floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.

S& F100 mm X 100 mm size, salt glazed stoneware gully traps, square or round mounted, type "S" or "P" set and jointed in cement mortar 1:1 complete all as specified and as directed.

M & L for PCC 1:2:4, type B-0 [using 12.5 mm graded granite stone aggregate] in surface channels and drains including forming fair finished drain or channel using extra cement including forms, moulds, mitred / stooped ends complete all as specified and as directed.

Precast cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in landings, cover slabs (for man holes etc) chullah hoods,chajjas,water troughs,shelves and similar articles with plain faces complete all as specified and as directed .

S&F 32mm bore low density polyethylene pipes (LDPE) pressure rating 6 kg/ cm2 of fixed complete to walls, ceiling or laid in floors , complete all as specified and as directed .

S&F Pillar taps of 15mm bore PTMT any colour high pressure screwed for iron pipe (Minimum weight 15mm -110g) complete all as specified and as directed .

S&F swivel shower of PTMT any colour for fixing with 15mm bore pipe. (Minimum weight 40gms) complete all as specified and as directed .

S&F angle stop valve of 15mm bore PTMT any colour high pressure screwed for iron pipe and fixed,(Minimum weight 15mm-90gms) complete all as specified and as directed .

S&F GI tubing 15mm bore medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and as directed.

S&F GI tubing 20mm bore medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and as directed.

S&F GI tubing 25mm bore medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and as directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exceeding 10 cm girth complete all as specified and as directed.

S&F 1000 ltrs capacity rotational moulded polythene water storage tanks white three layered (ISI marked) (Cylinderically vertical with closed top) hoisted and fixed in postion all as specified in SSR Part-I including PTMT ball valve heigh pressure with epoxy coated aluminium rod and high density plastic ball suitable for 20mm bore pipe weight not less than 210gms including 40mm thick PCC 1:2:4 type B1 using 20mm graded aggregate platform for water tank complete all as specified and as directed.

S&F bib tap 15mm bore standard of PTMT any colour high pressure screwed foriron pipe (Minimum weight 15mm-90gms.) complete all as specified and as directed .

S&F 20 mm bore gun metal, globe or gate valve, with iron wheel head, screwed both ends for iron pipe, complete complete all as specified and directed.

S& F PVC connection of 15mm bore and 450mm long with PTMT nuts complete all as specified and as directed.

S & F Vitreous china ware wash down water closet [Pedestal Pattern], white [ETWC] and 10 Liters capacity, low level flushing cistern, PVC, white, with inlet ball valve, float, handle, flush pipe of polyethylene of low or high density of PVC, 32mm dia including brackets and connections to pipe including plastic water closet seat back closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device and 'P' or 'S' trap complete all as specified and as directed.

S & F white vitreous china squatting pan "Orissa pattern" of size 580 mm X 440 mm with integral foot rests and 'P' or 'S' trap including provision of lime concrete bedding including 10 Liters capacity, low level flushing cistern, PVC, white, with inlet ball valve, float, handle, flush pipe of polyethylene of low or high density of PVC, 32mm dia including brackets and connections to pipe complete all as specified and as directed.

M&L of PVC (SWR) 75 mm bore single socketed in any length with rubber ring joints and laid in trenches complete all as specified and as directed.

M&L of PVC (SWR) 75 mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

S&F 75 mm bore (SWR) PVC bends any radius with access door complete all as specified and as directed.

S& F 75 mm bore PVC [SWR] Junction single [single "T"] equal or unequal with access door complete all as specified and as directed.

M&L of PVC (SWR) 110 mm bore single socketed in any length with rubber ring joints and laid in trenches complete all as specified and as directed.

M&L of PVC (SWR) 110 mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

S& F 110 mm bore PVC [SWR] Junction single [single "T"] equal or unequal with access door complete all as specified and as directed.

S&F 110mm bore (SWR) PVC bends any radius with access door complete all as specified and as directed.

S & F stack clamps made out of 50 X 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 110mm bore pipes complete all as specified and as directed.

S & F 110 mm bore PVC [SWR] vent cowl complete all as specified and as directed.

S & F 150 mm bore reinforced cement concrete pipes, one end socketed, class NP2, laid in trenches and jointed complete all as specified and as directed .

S&F viterous china bowl urinal flat back, of size 465 x 355 x 265mm white (Minimum) with grating and union for discharge pipe including providing and fixing plugs, bedding urinal against wall in CM 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement including CP stop cock 15mm bore, ,PVC connection pipe 15mm bore 600mm length, PVC waste coupling 32mm and waste pipe etc complete all as specified and as directed.

M&L stone slab 25 mm to 35 mm thick dressed true and square, in one length not less than 60cm and n. exc 120cm in copings, window cills, chajjas, sunshades, etc., punched dressed on exposed faces and self faced on the embedded unexposed beds and joints, exposed edges rounded or chamfered as directed, set, jointed and pointed in cement mortar 1:4 complete all as specified and as directed .

M&L random rubble walling, uncoursed well bonded, laid dry in retaining walls , abutments and similar work complete all as specified and as directed.

M & L walling of random rubble masonry,well bonded ,bedded and solidly hearted built in cement mortar 1:6 complete all as specified and directed.

M&L point wiring using approved colour coding as per IS (Red , Black and Green for single phase circuits),with multi stranded copper conductor 1.5 sq mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade, ISI-694 marked with valid CML No.in and including PVC casing& caping with all accessories complete and terminated to and including provision of sunken 1.6mm thick pressed steel terminal boxes with 3mm thick hylam sheet cover on top for fixing switches, sockets / regulators etc.,, inciuding PVC insulated multistranded copper conductor 1.5 sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly for,one way switch One light / fan point controlled by one, one way switch complete all as specified and directed .

All as per Serial Item No.96.00 above but for one 3 pin socket outlet 5 Amps on the same board with other switches.

All as per Serial Item No. 96.00 above but one 3 pin socket outlet 5 Amps on independent board complete all as specified and as directed.

All as per Item No. 96.00 above but for 15 Amps socket point on independent board with 4 Sqmm PVC insulated FRLS multi-stranded copper conductor with 4 Sqmm PVC insulated FRLS multi-stranded copper conductor as earth wire,complete all as specified and as directed.

M&L factory made distribution board in sheet metal enclosure in double door with 200A rated bus bar,SPN 8 way, 240V for fixing MCB's complete all as specified and as directed.

M&L factory made distribution board in sheet metal enclosure in double door with 200A rated bus bar,SPN 4 way, 240V for fixing MCB's complete all as specified and as directed.

M&L MCB SPN ‘C’ Curve 10KA , 40 amps 230V complete all as specified and as directed .

M&L MCB SP ‘C’ Curve 10KA , 6-30 amps 230V complete all as specified and as directed .

M&L switch piano type 5 Amps, single pole, flush type, one way, complete all as specified and as directed.

M&L switch piano type 15 Amps, single pole, flush type, one way, complete all as specified and as directed.

S&F socket outlets 5 Amps 2-in-1, 3 pin 230 V AC flush type, complete all as specified and as directed.

M&L socket outlet combination 5A/15A, 5 in 1, flush type complete all as specified and as directed .

M&L ceiling rose, 3 phase / PVC / Polycarbonate, isolated bodycomplete all as specified and as directed.

S&F LED light fitting 1X10W bulk head luminaries, with lamp holders including 10 W LED bulb complete all as specified and as directed Make : Havells/ Bajaj/Philips/CG

S&F lamp holder, PVC / polycarbonate type suitable for LED bulb including LED lamp 9W 230 volts complete all as specified and as directed .

S & F surface and wall mounted 20W tube light fitting LED batten, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electroinc driver including tube rod and connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed. Make :- Model No. LHEWEBP7IN1W020 of Havells or techno commercially equivalent make in Bajaj / CG / Philips

S&F1200mm sweep ceiling fan with all acessories including 4 step regulator and connected with twin core twisted flexible copper conductor cable from ceiling rose to fitting complete all as specified and as directed.

M&L Exhaust fan of 300 mm sweep complete with bracket frame including making necessary holes in wall with necessary connecting work and fixing the exhaust fan on the bracket frame and making necessary electric connection complete all as specified and as directed .

S&F LED 30 W street light fitting of new generation energy saving and environmental friendly long life, pressure die cast aluminimu housing with high efficient LED as lighting source and PC cover having TOP opening separate driver compartment with IP-66 protection and impact resistance of IK 07 including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed. Make :- Havells Model No. ENDURACITYLITEPLATPLUSSL30WLED757SASYBOPC or techno commercially equivalent make in Bajaj / CG / Philips

Supply and spreading clean dry sand ( Tibba sand) in trenches for cushioning to PVC cable and punning to provide required cover to UG cable complete all as specified and directed . Note :- Punned thickness shall be measured for the purpose of payment.

Supply & laying 40 to 50mm thick roughly hammer dressed Jodhpur stone patti cable cover 25cm to 30cm wide and not less than 60cm long each laid dry abutting with each other with maximum gap between adjacent slabs n. exc 10mm complete all as specified and as directed.

S&F of 2 core 6 Sqmm ,1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and over all PVC sheathed as in service connection complete all as specified and as directed.

S&F GI tubing, light grade of 50mm bore , as in road crossings / laid in trenches / fixed on walls / poles etc., for cable protection complete all as specified and as directed.

S&F GI tubing 20mm bore medium grade with all fittings and laid in trenches complete all as specified and as directed.

S&F GI tubing 25mm bore medium grade with all fittings and laid in trenches complete all as specified and as directed.

S&F 50 mm bore gun metal, globe or gate valve, with iron wheel head, screwed both ends for iron pipe, complete complete all as specified and directed.

Making connection to GI pipe 25mm dia from on existing 50mm CI pipe including clamps etc., and necessary excavation / earth work complete all as specified and as directed.

Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical Plate No 3 of MES SSR Part-I connected to main switch board or main control board all as specified and testing on completion including provision of earth wire protected by galvanized iron 15 mm dia light grade pipe and watering pipe shall be 20 mm bore light grade including all excavation and earth work in any type of strata, PCC pit with pre-cast RCC cover, charcoal/salt, funnel etc complete all as specified and as directed.NOTE :(i) The concrete pit shall be PCC 1:3:6 type C-1, 40 mm thick pre cast cover slab of RCC (1:2:4) type B-1 using 20mm graded stone aggregate reinforced with 8mm TMT bars @ 10 cm C/C on both sides with suitable cast iron handle shall be provided in lieu of cast iron cover shown in electrical plate No 3 of MES SSR Part-( ii) Item includes the cost of GI pipe up to 7.5m for protection of earth wire. any variation in length beyond 7.50 m shall be measured separately.(iii) Item includes cost of lead wire up to 7.5 m Any variation in length beyond 7.50 m shall be measured separately.(iv) PCC pit shall be provided at least 500 mm away from the pit and not on the earth pit itself and the extra cost of additional length of watering pipe, bends, elbow etc shall be deemed included in the unit rate.

M.D. CONSTRUCTION CO.

m/s jogaram sujaram

Godara Construction and General Suppliers