8716REPAIRS/MAINT OF INTERNAL WIRING FITTINGS AND FIXTURES AND CONNECTED ACCESSORIES IN TECH AREA UNDER AGE E/M WEST OF GE M AF JALAHALLI BANGALORE

Amount

Taking down copper/aluminum point wiring (light fan, socket or power) complete including fittings such as switches, sockets, celing/rose, pendents, regulators, sockets, light fittings, wooden boards, bell push, call bell, regulators etc (credit scheduled for the items should be made as per condition separately) and making good to disturbed wall and surface complete all as specified.

Supply and fixing for surface conduit Point wiring with 1.5 Sq mm multistranded copper conductor FRLS PVC insulated and unsheathed cable ISI Marked & drawing in and including non-metallic PVC conduit 20 mm bore medium grade & ISI marked on walls/ceilings/steel frame structure (with necessary arrangement as required at site) including cutting chasing for wiring , pinning in making good & finishing of disturbed surfaces,white wash matching with the existing surface colour & including all conduit fittings, clamps, gutties etc. for one light/fan point controlled by one switch or one fan point controlled by one switch and regulator each including provision of new pressed steel terminal boxes not less then 1.6 mm thick; with provision of new 3 mm thick plastic laminated sheet of and PVC insulated stranded copper continuous earth wire 1.5 Sqmm size FRLS to common earth and connecting to earth dolly, complete all as specified and directed. (Switch/socket, regulators shall be measured & paid for separately). Note- All the wires will be used with approved colour coding and as directed by Engr in-charge.

All as per item 2.0 here in before but for 3 pin socket outlet 5 amp independent but not below the main board In the same vertical plane complete all as specified.

All as per item 2.00 here in before but for 3 pin socket outlet 5 amp on the same board controlled by separate switch complete all as specified.

All as per item 2.0 here in before but with 2.5 sqmm copper conductor for 15 amp switch socket outlet combination . including 1.5 sqmm copper earth wire complete all as specified..

Supply & fixing in replacement of switch piano flush button type 6 Amp 240 Volt one way single pole complete all as specified.

Supply and fixing Socket outlet 2 in 1, 3 pin, 5A complete all as specified.

Supply and fixing Socket outlet 2 in 1, 5 pin, 15A complete all as specified.

Supply and fixing Switch socket combination 2 in 1, 5 A flush type complete all as specified and directed.

Supply and fixing switch socket combination multi purpose 5 Amp /16 Amps, 5 in1, flush type complete all as specified and directed.

Supply and fixing electronic double space rotary step fan 5 speed socket type regulator 120- 280 Volts complete all as specified.Make-SSK/HPL/Havells

Supply and fixing ceiling rose surface bakelite 3 terminals 65 x 50mm

Supply and fixing modular type switch 6 Amps, one way complete all as specified.

Supply and fixing modular type switch 16 Amps, one way complete all as specified.

Supply and fixing Modular Type Socket, 6A - 2/3 pin combined 2 module,complete all as specified.

Supply and fixing Modular Type Socket, 6/16A - 2/3 pin combined 2 module, complete all as specified.

Supply and fixing Modular Fan step regulator, 100/120W - 2 module Electronic step type complete all as specifed and directed.

Supply and fixing the White cover plate with frame 2 Module complete all as specified and directed by Engr-in-charge.

Supply and fixing the White cover plate with frame 3 Module complete all as specified and directed all as specified and directed by Engr-in-charge

Supply and fixing the White cover plate with frame 6 Module complete all as specified and directed all as specified and directed by Engr-in-charge.

Supply and fixing the White cover plate with frame 8 Module complete all as specified

Supply and fixing LED light fitting,4 feet ,1x20 watt 230 Volt, 4Feet slim body with reflector,drivers,LEDs Astra is a surface & wall mounted LED batten complete with all accessories including LED Tubes internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed including taking down old fitting.

Supply and fixing LED Tube light fitting 2 feet 1x10 watt 230 Volt, 2 feet slim body with reflector,drivers,LEDs and , complete with all accessories including LED Tubes internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed including taking down old fitting.

S & F of LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed including taking down old fitting..

Supply & fix the Square LED down lighter 15 watt fit at surface/Ceiling complete all as specified and directed and including taking down old fitting

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete and including taking down old fitting

Supply and fixing LED building Security Light Fittings 18/20 watts of turbo street lights are made up of pressure die cast housing with integrated lenses and high power LED's with IP66 protection. Efficacy ≥ 100LPW and other connected accessories including service bracket of GI pipe 32/40 mm bore medium grade of length 0.9 mtr with MS clamps, bolts, nuts, and washers as per required at site and making electrical connection with Copper wire 2 core of 1 Sqmm and taking down old unserviceable light any capacity any type complete all as specified and directed and including taking down old fitting.

Supply and fix Electronic LED FTL rod 4 Feet capacity 20W complete and including taking down old tube rod.

Supply and fix PVC insulated and FR PVC Round Sheathed, Copper Conductor (flexible) industrial cable of size 0.75 Sqmm 2 core , 1100 Volt, conforming to IS 694 connecting up the light fittings all as directed.

Supply and fixing for sheet metal enclosure MCB DB, IP-43, SPN, 240 volts ,8 way, double door type grouted in wall in cement mortar 1:3 and making electrical connection, complete all as specified and directed and including taking down old DBs.

Supply and fixing MCB SP, 5 to 32 Amps, 240 volts, 10 KA, 'C' Curve characteristics, including taking out old unserviceable MCB/Isolator, electrical connections and removal from the site complete all as specified and directed.

Supply and fixing MCB SPN,32 Amps, 240 volts, 10 KA 'C' Curve characteristics, including taking out old unserviceable Isolator & electrical connection and removal from the site complete all as specified and directed.

Supply and fixing in replacement of TPN Vertical Type Distribution Board, IP-43 protection, fitted with bus bars, neutral links, blanking plates (with out MCCB), 415 volts, 4 way double door type, grouted in wall in cement mortar 1:3 and making good of disturbed surface and matching with existing surface, complete all as specified and directed and including taking down old DBs.

Supply and fixing in replacement of MCCB, 4P, rated current 63 Amp, breaking capacity 16/18 kA thermal magnetic type and making electrical connection, complete all as specified and directed and including taking down old MCCB.

Supply and fixing sub-main wiring with two single core flame retardant PVC insulated and unsheathed cable with stranded copper conductor of 2.5 Sq mm drawing in & including medium grade PVC conduit pipe 20 mm bore ISI marked with all accessories on walls and making good of disturbed surfaces including all conduit fittings, clamps, gutties etc and one additional earth wire of 2.5 Sq mm but green in colour for earth DBs and boxes with proper thimbles connecting up and taking down old submain wiring complete all as specified and directed.Note : Two run of wire and one run of earth wire shall be measured as one RM.

Supply and fixing sub-main wiring with two single core flame retardant PVC insulated and unsheathed cable with stranded copper conductor of 4 Sq mm drawing in & including medium grade PVC concealed conduit pipe 20 mm bore ISI marked with all accessories on walls and making good of disturbed surfaces including all conduit fittings, clamps, gutties etc and one additional earth wire of 4.0 Sq mm but green in colour for earth DBs and boxes with proper thimbles thimbles connecting up and taking down old submain wiring complete all as specified and directed.Note : Two run of wire and one run of earth wire shall be measured as one RM.

Material and labour in replacement of 3 mm thick 75 x 100 mm size laminated sheet cover ISI mamrked including cutting of holes for mounting, switches, sockets, fan regulator etc complete all as specified and directed and including taking down old fitting.

All as per item No-37 but 100 x 100 mm laminated sheet cover with 04 Nos screw with washers complete.

All as per item No- 37 but 100 x 150 mm laminated sheet cover with 04 Nos screw with washers complete.

All as per item No -37 but 150 x 200 mm laminated sheet cover with 04 Nos screw with washers complete.

All as per item No . 37 but 250 x 200 mm laminated sheet cover with 04 Nos screw with washers complete.

Disconnecting and taking down the complete ceiling fan from ceiling hook/bolts/fan box any size/make/sweep from any OTM of technical Area and refixing after repairs/replacement of various component of ceiling fan and reassemblings,refixing and Testing complete.(Repair/replacement of various component of ceiling fan shall be measured and paid seperately against respective items). Note -The cost of replacement of unserviceable mild steel screws, nut bolt and washers cleaning of blades/down rod and body of ceiling fan greasing, oiling of bearing/bushes is included in the quoted rate against this item.

Material and labour for rewinding of motor of ceiling fan 1200/1400 mm sweep with super enameled copper wire of appropriate gauge as per existing including necessary varnishing testing commissioning and Cutting and taking out the burnt out copper winding complete

Supply and Fixing Ball bearing suitable for 1200/1400 mm sweep ceiling fan of ball bearing N0 6201/6202/6203 complete all as specified and directed. make- SKF/NBC

Supply and fixing for replacement of bush made out of stainless steel approved make for Ceilling fan any sweep/size/model complete all as specified

Supply and fixing for replacement of hanging/shackle clamp (hanger) with nut/bolt and rubber bush suitable for mounting/hanging of ceiling fan any type/any size all as specified and directed.

Supply and fixing in replacement of safety split pins of down rod of suitable size for any sweep make model of ceiling fans complete all as specified'

Supply and fixing for replacement of capacitor 2.15/2.5 mfd for ceiling fans of any make /model/sweep, complete all as specified and directed .

Supply and fixing fan blade set (set of three) made out of MS iron sutaible for 1200 mm sweep ceiling fan, as per exisitng size and guage all directed

Supply and fixing in repair bottom cover suitable for 1200/1400 mm sweep of any make as required at site & directed by Engr- in charge.

Supply and fixing in repair top cover suitable for 1200/1400 mm sweep of any make as required at site & directed by Engr- in charge.

Supply & fix PVC canopy of 1200/1400 mm sweep ceiling fan any make.

Supply and fixing in repair stator suitable for 1200/1400 mm sweep of any make as required at site & directed by Engr- in charge.

Disconnecting and taking down the complete Exhaust fan with bracket any size/any type form any OTM of technical area and refixing after repairs/replacement of various component of Exhuast fan and reassemblings,refixing and Testing complete.(Repair/replacement of various component of Exhaust fan shall be measured and paid seperately against respective items). Note - (i) The cost of replacement of unserviceable mild steel screws, nut bolt and washers cleaning of blades/down rod and greasing, oiling of bearing/bushes is included in the quoted rate against this item.(ii) Material and labour for rewinding of fans shall be measured and paid separately.

Material and labour for rewinding of motor of exhaust fan 300 to 375 mm sweep with super enamelled copper wire of appropriate gauge as per existing including necessary varnishing testing commissioning and Cutting and taking out the burnt out copper winding complete all as directed by Engr-in-charge.

Material and labour for rewinding of motor of exhaust fan 450 mm sweep with super enameled copper wire of appropriate gauge as per existing including necessary varnishing testing commissioning and Cutting and taking out the burnt out copper winding complete all as directed by Engr-in-charge.

Supply and fixing for replacement of capacitor 3.15 mfd for Exhaust fans of any make /model/sweep, complete all as specified and directed .

Supply and fixing for replacement of capacitor 4 mfd for Exhaust fans of any make /model/sweep, complete all as specified and directed .

Supply and fixing for replacement of blade assembly suitable for exhaust fan of same size make/model for 300 to 375 mm sweep single phase 230 volt completed all as directed .

Supply and fixing for replacement of blade assembly suitable for exhaust fan of same size make/model for 450 mm sweep single phase 230 volt completed all as directed.

Supply and fixing for replacement of gun metal bush of approved make for exhaust fan any sweep/size/model complete all as specified

Supply and fixing for replacement of rubber pad sutaible for mounting exhaust fan any size complete all as specified

Supply and fixing for replacement of mounting brackets with nuts and bolts 300/350 mm size for exhaust fan of any make/size complete all as specified and as directed.

Supply and fixing for replacement of mounting brackets with nuts and bolts 450 mm for exhaust fan of any make/size complete all as specified and as directed.

Supply and fixing for rewinding of motor of wall mounted air circulating fan of 450 mm sweep any make with super enameled copper winding of appropriate gauge including replacement ocsillation knob, greasing and testing including taking down and refixing after rewinding complete all as specified and as directed.

Supply and fixing for replacement of blade assembly with locking nut and spinnner for wall mounted air circulating fan 450 mm sweep of any make /model complete all as specified

Supply and fixing for replacement of Mounting plate with screw of wall mounted air circulating fan 450 mm sweep of any make /model complete all as specified and as directed.

Supply and fixing for replacement of Rear and front grill locking screw of wall mounted air circulating fan 450 mm sweep of any make /model complete all as specified and as directed.

Supply and fixing for replacement of rotary knob with pull cord speed control of wall mounted air circulating fan 450 mm sweep of any make /model complete all as specified and as directed.

MBN Enterprises