SPECIAL REPAIRS TO BLDG NO P-146 OF HQ 101 AREA UNDER GE SHILLONG

Amount

M&L Glazed ceramic colour tiles of size450 x 300 x 7mm /300x600x7 mm thick in vertical wall like skirting, dados etc set and jointed with neat cement slurry and pointed in white or colour cement to match with the colour of tile over and including 10 mm thick backing in cement sand mortar 1:4 including dismantling old tiles including cement mortar bedding and removing rubbish off the premisess complete as specified and directed.

M&L Non-skid ceramic white/colour tiles 7 to 8 mm thick , (square/rectangular), area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tiles over and including 15 mm thick backing in cement sand mortar 1:4 including dismantling old tiles including cement mortar bedding and removing rubbish off the premisess complete as specified and directed.

M&L 18-20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15 mm thick screed bed in cement and sand mortar 1:4 including dismantling old tiles including cement mortar bedding and removing rubbish off the premisess complete as specified and directed.

S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screwsincluding dismantling of old one any type complete all as specified and directed.

S & F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screwsincluding dismantling of old one any type complete all as specified and directed.

Taking down cement plaster on brick or concrete walls, etc including raking out joints, hacking for key, scrubbing down with water etc.conc block wall and removing of debries complete all as specified and directed.

Demolition of unreinforced cement concrete of any description and in any position not otherwise specified and removing rubbish off the premises complete all as specified and directed.

M&L for 25 mm thick PCC B-0, 1:2:4 using (12.5 mm graded aggregate) as in sub base floors finished even and rough without using extra cement complete all as specified and directed.

M&L rendering 5 mm thick on fair faces of brick work or concrete surface over 10 mm thick in CM 1:4 using water proofing compound @ 2% by weight or cement as per manufacture instruction and finishing even and smooth without using extra cement all as specified. Note: WPC shall be measured and paid for under separate item.

Supply of Integral WaterProofing Compound ISI Marked

Supply and fix, PVC (SWR) pipes 180mm bore single socketed , in any length with rubber ring joints fixed to wall with necesarry clamps etc all as specified and directed complete all as specified and directed.

Supply and fix PVC (SWR ) bend 180mm bore complete all as specified and directed.

M&L for preparation of old painted steel surfaces surfaces of any description, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide primer over 10cm width or girth complete all as specified and directed

S&F in repairs vitreous china wash down water closet pan (padestal pattern ) white incl 10 litre vitreous china valveless, syphonic action type flushing cistern low level , white with in let, ball valve, float and handle with all accessories set as specified and as directed by Engr-in-Charge. Make : Jaquar Cat Part No. LYS-WHT-38751SSM & LYS-WHT-38201 or equivalent in Marc/Kohler

Supply and fix I in repairs brass chromiom plate tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S&F in repairs Wash hand basin vitreous china of size 630x450mm including pedestal and fixing arrangement complete as specified and as directed by Engr-in-Charge. Make : Jaquar Cat Part No LYS-WHT-38801 & LYS-WHT-38801 or equivalent in Marc/Kohler

S&F in repair CP Bib tap with wall flange, complete with all as specified and directed by Engr-in-Charge. Make : Jaquar Cat Part No. QQT-7037 or equivalent in Marc/Kohler

S&F in repair CP Angular stop cock with wall flange, complete with all as specified and as directed by Engr-in-Charge. Make : Jaquar Cat Part No. QQT-7053 or equivalent in Marc/Kohler

S&F in repair CP Bib tap 2 in 1 with wall flange, complete with all as specified and directed by Engr-in-Charge. Make : Jaquar Cat Part No. ORP-10041PM or equivalent in Marc/Kohler

S&F in repair 15 mm bore CP health foucet cock with flexible pipe 1 m long complete as specified and directed by Engr-in-Charge. Make : Jaquar Cat Part No. ALD-565 or equivalent in Marc/Kohler

S&F in repair Soap dish, complete with all as specified and directed by Engr-in-Charge. Make : Jaquar Cat Part No. AKP-35731Por equivalent in Marc/Kohler

S&F in repair Toilet roll holder with flap, with all accessories complete all as specified and directed by Engr-in-Charge. Make : Jaquar Cat Part No. AKP-35753PSS or equivalent in Marc/Kohler

S&F in repair towel ring square shape stainless steel complete all as specified and directed by Engr-in-Charge. Make : Jaquar Cat Part No. AKP-35753PSS or equivalent in Marc/Kohler

S&F in repair Corner glass shelf (with bracket), complete with all accessories set as specified and as directed by Engr-in-Charge. Make : Jaquar Cat Part No. ACN-1173 or equivalent in Marc/Kohler

S&F in repair fancy type CP single lever basin mixer without popup waste with 450 mm long braided hose, complete with all accessories set as specified and as directed by Engr-in-Charge. Make : Jaquar Cat Part No KUP-35051BPM or equivalent in Marc/Kohler.

S & F Powder coated (minimum thickness of powder coating 50 micron) aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing , handles 2 Nos. in each door, hinges, aluminium snap beading, screws, etc. complete all as specified and as directed.

S & F Powder coated (minimum thickness of powder coating 50 micron) aluminium anodised door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing , aluminium snap beading, screws, anodised aluminium fittings such handles 2 Nos in each door, hinges, anodised aluminuim screws etc complete all as specified and as directed.

S & F Powder coated (minimum thickness of powder coating 50 micron) aluminium window and ventilators shutters, side hung/sliding type without sash, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing , aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long, 100 mm long hinges type B-21, suitable handle, etc. complete all as specified and as directed.

Supply and fixing 4.80 mm thick sheet glass ordinary quality & glazing fixed to aluminium frame exc 0.50 sqm in each pane complete all as specified and directed.

Supply and fixing 4.80 mm thick sheet glass frosted type & glazing fixed to aluminium frame exc 0.50 sqm in each pane complete all as specified and directed.

M&L for providing Prelaminated particle board 12 mm thick, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screw to timber frame work complete all as specified and directed

M&L for Vitrified Ceramic tiles light shade, double charged 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matc laid over and including 15 mm thick backing in cement sand mortar 1:4 including dismantling old tiles including cement mortar bedding and removing rubbish off the premisess complete as specified and directed.

All as per item No 32 here in before but in vertical surface such as skirting/dado laid over and including 10 mm thick backing coat in CM 1:4 complete all as specified and directed.

M&L for Chamfer, splays or arris in facework n. exc 15mm wide to granite stone complete all as specified and directed.

M&L for Complete removal of existing treatment of plastered surfaces of wall, and applying one coat of white cement based wall care putty (minimum 1.0mm thick) and preparation of surface with alkali resistant priming paint and applying two coats of distemper oil emulsion, complete all as specified and as directed.

M&L for new plastered surfaces of wall, any description, washing rubbing down and applying two coats exterior acrylic emulsion paint ( 1st quality of exterior grade) over a coat of suitable exterior primer as per manufacturer instruction complete all as specified and directed.

M&L for Complete removal of existing treatment of plastered surfaces of wall, any description, washing rubbing down and applying two coats exterior acrylic emulsion paint ( 1st quality of exterior grade) over a coat of suitable exterior primer as per manufacturer instruction complete all as specified and directed.

Taking down carefully old unserviciable copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, sunken type box etc. and removing materials to store for keeping in safe custody for reuse at site or for taking credit and making good to disturbed surfaces of walls, floors etc with its original specification complete all as specified and directed by Engr-in-Charge.

M&L for point wiring for modular fittings with 1.5 Sqmm (nominal area) PVC insulated1100 volts grade, multistranded, copper conductor, single core, unsheathed cables (FRLSH quality) drawn through and including PVC casing caping of suitable size but not less than 20 mm width (medium grade) with all fittings and accessories including suitable PVC modular box or pressed steel modular boxes made out of 1.6 mm thick mild steel sheet metal conforming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly and coated with two coats of anti corrosive paint both internally and externally including modular cover plate with frame etc and including cutting chases for sinking for boxes and making good to disturbed surfaces, including PVC insulated and unsheathed, single core, multi-stranded, copper conductor cable of size 1.5 Sqmm green in colour as earth continuity conductor connected to common earth and earth dolly for one light point/fan point controlled by one 5 Amps one way switch complete as specified and directed.

All as per item No 39 above but for one 3 pin socket outlet 5 Amps on same board alongwith other suitable switches.

All as per item No 39 above but for one 3 pin socket outlet 5 Amps on independent board alongwith other suitable switches.

All as per item No 39 above but with 2.5 sqmm cable for 3/5 pin 15 Amps switch socket outlet (Power point) complete all as specified.

Supply and fixing of modular switch one way 6 amps 1 module 230/250 Volts complete all as specified/directed. Make: Legrand/L&T/Schneider

Supply and fixing of modular socket outlet 2/3 pin 6 Amps 230/250 volts 2 module complete all as specified/ directed.Make: Legrand/L&T/Schneider

Supply and fixing of modular switch one way 16 amps 1 module 230/250 Volts complete all as specified/directed. Make: Legrand/L&T/Schneider

Supply and fixing of modular socket 6/16 Amps, 230/250 volts, 2/3 pin combined, 2 module complete all as specified and directed.Make: Legrand/L&T/Schneider

Supply and fixing ceiling rose, 3 terminal PVC/polycarbonate, isolated body complete all as specified and directed. Make : Anchor/SSK/Havells

Supply and fixing LED batten fittings 1x18/20 Watt complete pre wired fixed to wall with 2 nos PVC block of suitable size make Havells Cat no LHEXACP7PN1W018 or PHLIPS Model no DX18 UJJWAL or Crompton cat no LCTL20CDL

S & F wall mounted LED batten fittings with all accessories 1X 10 Watt LED, extruded polycarbonate, integrated electronic driver and fixed to wall with 2 Nos PVC block suitable size complete all as specified and as directed. Make - Havells Cat no LHEXACP7IN1W010 or Crompton cat no LCTL 10 CDL or equivalent in Philips

Supply and fixing lamp holder angular PVC/Polycarbonate suitable for batten fittings complete all as specified/directed.

Supply & fix exhaust fans PVC body AC single phase 230/ 240 V of size250 mm sweep with louver including cutting of circular hole finishes with painting/distempering/whitewashing on any type of wall suitable size for fixing of exhaust fan of size 300mm sweep, grouting 04 Nos 100mm long 12mm dia stud bolt including, making good to disturbed surfaces of wall and with to match as per the existing colour complete all as directed and specified by engineer-in-charge.

Supply and fix security building light LED 25 watt including connection with three core cable 1.5 sqmm with suitable size bracket nut, bolt, clamp etc including old security light any type complete all as specified and directed by Engr-in Charge. Make: Havells Cat Part No: ENDURACITYLITE25W or Bajaj cat No BRLEP25 LED WH or Surya Cat No LSTO 25 CDL equivalent in Philips.

Supply and fix flood light LED 180 watt , heat resistant glass, IP-65 protection, better optics for uiform distribution complete including connection with three core cable 1.5 sqmm with suitable size bracket nut, bolt, clamp etc including old flood light any type complete all as specified and directed by Engr-in Charge. Make: Havells /Bajaj/ Surya/ Philips.

Supply and fixing in repair of MCCB TPN DB 4 way vertical type double door,IP-43 protection, isolated neutral bar, insulated busbar assembly, mechanical impact strength of IK08, including MCCB's upto 125 Amps as incomer complete all as specified and directed by Engr-in-charge

Supply and fixing in repair of MCB SPN DB 12 way double door,IP-43 protection, isolated neutral bar, insulated busbar assembly, mechanical impact strength of IK08 complete all as specified and directed by Engr-in-charge.

S&F MCCB,100 Amps 16kA, TPN, 415 volt adjustable all as specified and directed by Engineer-in- Charge.

Supply & fixing of MCB DP 40 Amps 'C' Series 10 KA 415 volts complete all as specified/directed.

Supply & fixing of MCB SP 6 to 32 Amps 'C' Series 10 KA 415 volts complete all as specified/directed.

Supply and fixing in repair of MCB SPN DB 8 way double door,IP-43 protection, isolated neutral bar, insulated busbar assembly, mechanical impact strength of IK08 complete all as specified and directed by Engr-in-charge.

M&L in repair sub main wiring with 2 runs of 6 Sqmm single core, PVC insulated, unsheathed 1100 Volts grade, multi-stranded, copper conductor cables (FRLSH quality) drawn through and including suitable size medium grade PVC casing caping with fitting/accessories as required including 6 Sqmm PVC insulated, unsheathed, multistranded, FRLSH copper conductor, single core cable as earth continuity wire with all fittings complete as specified and directed. Note: Two run of single core cable, casing caping and one run earth wire will be measured as one length.

M&L in repair sub main wiring with 2 runs of 1.5 Sqmm single core, PVC insulated, unsheathed 1100 Volts grade, multi-stranded, copper conductor cables (FRLSH quality) drawn through and including suitable size medium grade PVC casing caping with fitting/accessories as required including 1.5 Sqmm PVC insulated, unsheathed, multistranded, FRLSH copper conductor, single core cable as earth continuity wire with all fittings complete as specified and directed. Note: Two run of single core cable, casing caping and one run earth wire will be measured as one length.

M&L in repair sub main wiring with 2 runs of 4 Sqmm single core, PVC insulated, unsheathed 1100 Volts grade, multi-stranded, copper conductor cables (FRLSH quality) drawn through and including suitable size medium grade PVC casing caping with fitting/accessories as required including 4 Sqmm PVC insulated, unsheathed, multistranded, FRLSH copper conductor, single core cable as earth continuity wire with all fittings complete as specified and directed. Note: Two run of single core cable, casing caping and one run earth wire will be measured as one length.

Supply and Fixing Bulk head fitting ultrta low energy, modern design utility suitable for indoor and outdoor application with IP-65 protection including connection with three core flexible copper cable complete all as specified and directed. Make: Crompton LBHP-10-CDL or Havells Cat Part No LHEOAOP7UZ6W010 or its equivalent make of Philips/WIPRO

Material and labour for Earthing complete with galvanized steel earth plate 60cmx60cmx6mm thick electrode, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to GI earth lead wire of 4 mm dia upto 7.50m up to test point by means of nuts, bolts, check nuts and washers, GI pipe 15mm bore light grade for cable protection, excavation and earth work, PCC 1:3:6 type C-1 pit, 20mm dia GI pipe medium grade, watering pipe and 15mm bore GI pipe, light grade for protection of earth wire, MS angle iron frame 40x40x3mm, 40mm thick RCC 1:2:4 type B-1 cover reinforced with 6mm dia MS bars @ 75mm C/C both ways and with MS handle made out of 12mm dia bars, PGI Funnel, wire mesh, charcoal and common salt in alternate layer of 15cm complete etc all as shown in electrical Plate No. 03 of SSR Part-I (2009) and connected to earthing test point including testing on completion complete.all as specified and as directed.

M/s Chandan Kumar Thakur

M/s M.L Consortium

M/s L A Enterprise