Improvement of Water Supply Scheme Gidder Block Nathana District Bathinda

Removing Doors and windows with chowkhats by making recesses in walls when the wall is not to be dismanteled. b) windows of area 3 sqm and below. (Item No. 8.26)

White washing three coats. (Item No. 16.3)

Finishing walls with cement based water saluble exterior paint such as snowcem, robbiacem etc. two or more coats to give an even shade. (Item No. 16.13)

Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade. (Item No. 16.17)

Applying priming coat with metal primer on new steel or iron work including preparation of surface. (Item No. 16.20)

Hollock wood doors shutter windows shutter including hinges, screws, chocks, cheats, stops cords etc. complete fixed in position. a) Panelled, glazed or glazed and panelled (Double leaf) ii) 35 mm thick (Item No. 17.10 (xvii) )

Supply & fixing of pressed steel frames (chowkats) consisting of 18 gauge thick steel sheet of the specified section (standard design latest) including iron lugs iron hinges, confirming to PWD specifications including bolts for fixing stops, lock etc. complete. a) Doors and windows frame of size 118 mm x 60 mm wide single rebate weighing 3.43 kg per meter. (Item No. 18.24)

Providing & fixing CI/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts slucie valves ISI marked, 14846-2000, including jointing, testing & cost of Nut, bolt & insertion sheet all carriage complete (with the approval of Engineer-in-charge). A) Class PN-1 as per ISI c) 150mm i/d Sluice Valves Flanged (Item No. 28.27)

Construction of masonary Sluice Valve Chamber excluding sluice valve cover as per standard design and drawing of public health deptt. B) Size 0.90m x 0.90m (Item No. 28.66)

Supplying,fixing and testing at site Automatic electronic type water level indication system with gun metal float sensor and electrical cable suitable for three phase pump submersible/ monoblock to be fixed on existing panel for OHSR 150 cum capacity complete in all respects. (Item No. 28.90)

Providing & fixing Orient Electric Apex-FX 1200 mm Ceilling Fan (White) & Regulator etc. Complete. (Item No. NS)

Repair of leakage of dome for RCC OHSR 150 Cum Complete in all respects. (Item No. NS)

Construction of Plinth Protection of RCC OHSR 150 Cum complete in all respects. (Item No. NS)

Dismentaling existing steel ladder from water tank of OHSR 150 cum capacity & placeing the same near pump chamber at site etc. complete (Item No. NS)

Providing & fixing Aluminium Ladder inside the tank should consist of 60 cm wide ladder make from aluminium section LS 974 size, 66.68 x 31.75 x 4mm, weight 1.27 kg/mtr with steps made out of aluminium section H, SP 3024 Size 35 x 16.70 x 1.60 mm, weight 0.362 kg/mtr to be fixed one side in the top dome and other side in the bottom dome including liffiting from ground to vessel of the OHSR 150 Cum capacity etc. (Item No. NS)

Providing, Laying,Fixing & Jointing of P . V. C Pipes 6 Kg f/sqm ISI Marked as per ISI- 4985 along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications.including specials & excavation for pipe line in trenches and pits upto required depth and cover on pipe minimum 1 mtr. with earth etc. complete in all respects. 63 mm o/d (Item No. NS)

Cost of Painting of Sign Board etc. complete in all respects. (Item No. NS)

Providing house hold connection with laying, jointing, fixing, testing MDPE Pipes (as approved by Engineer-in-charge) including cost of excavation, refilling water meter, CI bib cock as per IS : 210 with stainless steel spindle, 20mm i/d MDPE Pipe 2.00 mtr. 15mm i/d GI Pipe 2.50 mtr.(length on average basis) 3" i/d clamp, GM Ferrule ISI marked connection of 15 mm i/d ferrule midium specials such as tees, bends, sockets, elbows, nipples (100 mm & 150 mm) union couplings, GI hooks etc. & gun metal peet valve (heavy pattern) with hand wheels on MDPE Pipe lines laid in the ground or inside buildings, cutting, threading, making hole in wall and testing in treanches in the ground all materials should be approved make (to the approval of Engineer-in-charge) Complete Job in all respects including cost of carriage. (Refer CSR item No. 28.34b, 30.65b, 28.40a, 28.43a, 28.46) No. of Connections on existing Pipe Line (Item No. NS)

No. of Connections on Proposed Pipe Line

Repair of existing Connections. (Item No. NS)

Credit of old material i.e. Chokates, Window & Sluice Valve etc. ( - )