REPAIRS TO SEWAGE LINE, SEPTIC TANK, SOCKAGE PIT AND MISC WORK IN VARIOUS SECTORS BLDGS ETC UNDER GE (AF) CHILODA

Amount

Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sqm on plan and n exc 1.5 in depth and getting out in soft/loose soil complete all as specified and directed.

All as per Item No 01 here in before but exc 1.5 m and upto 3.0m depth.

All as per Item No 01 here in before but exc 3.0m and upto 4.5m depth.

Returning filling in including spreading,levelling,watering and well ramming in later on exceeding 25 cm in soft and loose soil complete all as specified and directed.

Removing excavated material n exc 50 m and depositing where directed at level not n exc. 1.5 m above the starting point complete all as specified and directed.

M&L for PCC (1:3:6) type C2 (40mm graded broken stone aggregate) as in foundation of manholes including necessary for work complete all as specified and directed.

Demolition of brick work built in cement mortar incl all quoins, arches, pillars etc all as specified and directed.

M&L Brick work with fly ash brick, old size bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed

M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in coping or benching of manhole etc including necessary formworks complete all as specified and directed.

Demolition and breaking up 150 mm bore salt glazed stone ware drain pipe(SGSW), RCC NP-2 & DWCPE incl PCC packing under hunching against the sides of bed and complete PCC bed complete all as specified and directed.

All as per Item No 10 here in before 200 mm dia pipe.

Dismantaling of 75mm dia cast iron or reinforced concrete drain pipe incl PCC packing under haunching against the sides of bed and complete PCC bed complete all as specified and directed.

All as per Item No 12 here in before but 100 mm dia pipe

M&L for cement plaster 10mm thick plaster in CM 1:3 with WPC on fair faces of brick work or concrete surfaces of walls finished even & smooth with out using extra cement. (WPC shall be measured seperately) complete all as specified and directed.

M&L for 150 mm internal dia class 'A' salt glazed stone ware drain pipe laid in trenches and jointed in CM 1:1 complete all as specified and directed.

All as per Item No 15 here in before but 200 mm dia pipe

M&L for Reinforced concrete pipes, class NP2, 150 mm bore pipe, laid in trenches and jointed complete with collars jointed with cement mortar (1:1) complete all as specified and directed.

All as per Item No 17 here in before but 200 mm dia pipe

S&F Double wall corrugated pipe (SN8) confirming to IS-16098, 150mm nominal bore pipe laid and jointed including testing with necessary jointing material tees/union/socket etc complete all as specified and directed.

S&F Double wall corrugated pipe (SN8) confirming to IS-16098, 200mm nominal bore pipe laid and jointed including testing with necessary jointing material tees/union/socket etc complete all as specified and directed.

M&L Concrete bed to 150mm dia drain pipes including packing under,and haunching & packing against the sides of pipes after they are laid and tested in; cement concrete 1:4:8 type D-2 ,40mm graded complete all as specified and directed. .

All as per Item No 21 here in before but 200 mm dia pipe

S&F 75 mm dia Cast iron soil, waste and vent sand cast pipes, in any length with or without ears with cement joints, laid in trenches or in floors, fixed in repairs complete all as specified and directed.

All as per Item No 23 here in before but 100 mm dia pipe.

S&F 75 mm dia Cast iron soil, waste and vent sand cast pipes, in any length with or without ears with cement joints, fixed to wall ,fixed in repairs complete all as specified and directed.

All as per Item No 25 here in before but 100 mm dia pipe.

Desilting of man hole up to 1.50m depth and stacking the silt at the distance exc 100m but not exc 250m, all as directed by Engineer-In-Charge.

All as per item No. 27 above, but depth of man-hole exceeding 1.50m and not exceeding 2.50m complete all as specified and directed.

All as per item No. 27 above, but depth of man-hole exceeding 2.50m and not exceeding 3.50m complete all as specified and directed.

Desilting of soakage well/septic tank for 50 users with dewatering including carriage of sludge from tank and disposed to a distance out of MOD land, all as directed by Engineer-in-Charge.

All as per Item No. 30 above, but septic tank of 100 users complete all as specified and directed.

All as per Item No. 30 above, but septic tank of 150 users complete all as specified and directed.

All as per Item No. 30 above, but septic tank of 200 users complete all as specified and directed.

All as per Item No. 30 above, but septic tank of 300 users complete all as specified and directed.

Cleaning of WC/EWC and removal of blockage by pumping of waste up to first manhole with steel road/ flexible rod or bamboo or through mechanical sewage cleaning apparatus and finally washing with fresh water complete all as specified and directed.

Cleaning of Nanhi trap and removal of blockage by pumping of waste up to first manhole with steel road/ flexible rod or bamboo or through mechanical sewage cleaning apparatus and finally washing with fresh water complete all as specified and directed.

Cleaning of Gully trap and removal of blockage by pumping of waste up to first manhole with steel road/ flexible rod or bamboo or through mechanical sewage cleaning apparatus and finally washing with fresh water complete all as specified and directed.

Removal of blokage/choke up obstructing the flow of sewage line of stoneware pipe and RCC pipe between two consecutive manholes at any depth by rodding and flushing water in line after rodding to clean the line for 100mm dia pipe complete all as specified and directed.

All as per Item No. 38 above, but for 150 mm bore pipe complete all as specified and directed.

All as per Item No. 38 above, but for 200 mm bore pipe complete all as specified and directed.

Cutting in to existing manhole for connecting 150mm dia new drain pipe, making good to pipe and rendering, cutting-out existing benching, for and forming branch channel ( ½ round or ¾ section) in cement concrete 1:2:4 type B1, smooth finished and reforming benching as required complete all as specified and directed.

All as per Item No. 41 above, but for 200 mm bore pipe complete all as specified and directed.

Demolition of Reinforced cement concrete manhole cover/slab of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for Pre cast RCC 1:2:4 type B1 using 20 mm graded stone aggregates as in cover slab for soakage well / manhole and similar works supported on walls and set in cement mortar 1:4 incl necessary form work and demolition complete all as specified and directed.

S&F TMT steel bars but 6mm to 8mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S&F TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Dismantling of floor hearth or wall tilling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for 15mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified and directed.

M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:4 to receive tiles etc on vertical surfaces of walls complete all as specified and directed.

M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 SQM but not exceeding 0.11 SQM, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for Glazed ceramic coloured tiles in vertical surfaces 300x450x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 SQM but not exceeding 0.18 SQM, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. .

S & F in repair vitreous china wash down water closet pan (pedestal pattern ) 100mm bore p or s trap (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed.

S&F in repairs 10 litres capacity PVC valveless symphonic action type, flushing cistern, low level, white, with inlet, ball valve float handle including brackets complete all as specified and directed.

S&F in repairs vitreous china squatting pan, Orissa pattern of size 580x440mm, white with integral foot rest including connection to trap and flushing pipe complete all as specified and directed.

S&F cast iron pipes bends (any radius), diminishing pieces or tapers 75mm dia(larger bore measured) complete all as specified and directed.

S&F cast iron pipes cowls of 75mm dia complete all as specified and directed.

S&F cast iron pipes bends (any radius), dimisishing pieces or tapers 100mm dia (larger bore measured) complete all as specified and directed.

S&F Cast iron pipes cowls of 100mm dia complete all as specified and directed.

Taking down rainwater pipes(any size or pattern), including all fittings, heads, shoes, bends, swan necks etc complete all as specified and directed.

S&F PVC (SWR) pipes single socketed 110mm bore, in any length with rubber ring joints, laid in trenches or in floors, fixed in repair complete all as specified and directed.

S&F PVC (SWR) pipes single socketed 110mm bore, in any length with rubber ring joints, fixed to walls, fixed in repair complete all as specified and directed.

S&F PVC (SWR) pipes single socketed 75mm bore, in any length with rubber ring joints, fixed to walls, fixed in repair complete all as specified and directed.

S&F PVC (SWR) pipes single socketed 75mm bore, in any length with rubber ring joints, laid in trenches or in floors, fixed in repair complete all as specified and directed.

S&F PVC (SWR) bends any radius 75mm dia complete all as specified and directed.

S&F PVC (SWR) bends any radius 110mm dia complete all as specified and directed.

S&F in repair plastic water closet seat cover, white or black colour closed pattern with flat bottom including taking down old seat cover complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Dismantling of stone slabs & tiles of any description or thickness in floor aprons etc laid, bedded and pointed in any mortar complete all as specified and directed complete all as specified and directed.

Dismantling of stone slabs & tiles of any description or thickness in floor aprons etc laid dry or laid dry and pointed complete all as specified and directed.

M&L for 75 mm thick PCC 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in sub base of floor , mass concrete or similar work including necessary formwork complete all as specified and directed.

M&L for chequered cement concrete tiles of size 30cm x 30cm x 25mm thick,set, jointed and pointed in neat cement slurry in floors with grey cement and pigments over and including 20 mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed.

M&L for sand filling/sand cushioning of interlocking tiles under floors or in foundations of any description of work including watering and consolidation complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment conforming to IS-15658-2006 of 60mm thickness M-35 grade complete all as specified and directed.

All as per Item No 74 here in before but above except tiles complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment conforming to IS-15658-2006 of 80mm thickness M-40 grade complete all as specified and directed.

All as per Item No 76 here in before but above except tiles complete all as specified and directed.

M& L factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever omplete all as specified and as directed.

M&L for preparation of old painted surfaces of wall / concrete surfaces over 10cm width or girth not otherwise described and applying one coats of synthetic enamel paint complete all as specified and directed.

M&L for preparation of new surfaces of wall / concrete surfaces over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

S&F in repair Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws asspecified complete all as manufacturers instruction complete all as specified and directed.

S&F in repair Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as in ridges, hips, valley gutter, drip, and straight flashing complete all as specified and directed.

S&F in repair 2mm thick fibre glass reinforced translucent corrugated/plain sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S & F MS steel work in tubular /post/trusses/purlin including special shaped washers base and bed plate cleat nut and bolt etc confirming to IS 1161- 1979 graded St 240 complete all as specified and directed.

S&F Stairs (framed) including stringers, treades, landing balusters, hand rails etc. including cleats brackets Fe 290 (Gde E-165) etc complete all as specified and directed.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed.

M&L for Plates (Plain or Chequered) channels, square or notched (Ordinary and counter sunk) forming holes, without any attachment of Fe 290 (Gde E-165) completely all as specified and as directed by Engineer in Charge.

S&F Expanded metal wire mesh weigth n exc 4 Kg per Sqm, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members complete all as specified and directed.

Material and labour for applying one coats of synthetic enamel paint on old steel surfaces of any description, over 10 cm width or girth, not otherwise described including preparing complete all as specified and directed.

Material and labour for applying two coats of synthetic enamel paint on steel surfaces of any description over a coat of Red oxide primer , over 10 cm width or girth, not otherwise described including preparing complete all as specified and directed.

Ramdev and Sons (BID ID -3413899)

Haritwal traders (BID ID -3414241)