Package No. Dhubri/MMPNA/BUG/03 Repair / Rehabilitation of BUG/STEEL (1) Br. No. 5/1 on Madakhali to Beguntoli Road (2) Br. No. 1/2 on NH-31 Botertol Road (3) Br. No. 1/1 on NH-31 Targhat to Ashirikandi Road (4) Br. No. 4/1 on Gauripur Bashbari Road

Amount

Bridge No. 5/1 Clearing / Removal of rust from Steel members using sand paper and Iron brush including making and fitting of necessary scaffolding arrangement complete as directed by the Engineer-in-charge.

Greasing of Bearing with ULTRATACK AP3 grease including cleaeing of bearings with steel brush, removal of dusts and dirt with necessary scaffolding etc. complete as directed by the department.

Painting two coats including prime coat with epoxy paint of approved brand on concrete/steel surfaces after through cleaning of surface to give an even shade as per drawing and Technical Specification Clause 1701

Spplying and applying one coat of Zinc based epoxy anticorrosive coating like MasterEmaco P 130 of BASF or euivalent @ 0.2 Lit per Sqm all over the exposed reinforcement over thoroughly cleaned and prepared steel bars including formwork as directed and specified by the department complete.

RCC Guard Post: Supplying, fitting and fixing RCC guard post 150cm long erected 75cm above the ground and 75cm below the ground with M-15 grade (nominal mix 1:2:4 with broken stone aggregate up to 20mm size) of cement concrete and required reinforcement tied in position with annealed black wire including centering, moulding the top, curing including painting concrete surfaces in 23cm strips upto 0.75m from the top alternately in black and white and having 2 nos. reflective band of desired shade etc. complete as per design and as directed. 30 cm dia. RCC guard post with reinforcement of 6nos. 12mm dia TMT main steel bars and 6mm TMT/ MS stirrups at 15cm c/c.

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801. 600mm circular

PCC M15 Grade leveling course below approach slab complete as per drawing and Technical specification

Reinforced cement concrete approach slab including reinforcement and formwork complete as per drawing and Technical specification. TMT-IS 1786 ( Fe-500 D) Secondary Producer (ISI approved)

Bridge No. 1/2 Clearing / Removal of rust from Steel members using sand paper and Iron brush including making and fitting of necessary scaffolding arrangement complete as directed by the Engineer-in-charge.

Greasing of Bearing with ULTRATACK AP3 grease including cleaeing of bearings with steel brush, removal of dusts and dirt with necessary scaffolding etc. complete as directed by the department.

Painting two coats including prime coat with epoxy paint of approved brand on concrete/steel surfaces after through cleaning of surface to give an even shade as per drawing and Technical Specification Clause 1701

Spplying and applying one coat of Zinc based epoxy anticorrosive coating like MasterEmaco P 130 of BASF or euivalent @ 0.2 Lit per Sqm all over the exposed reinforcement over thoroughly cleaned and prepared steel bars including formwork as directed and specified by the department complete.

RCC Guard Post: Supplying, fitting and fixing RCC guard post 150cm long erected 75cm above the ground and 75cm below the ground with M-15 grade (nominal mix 1:2:4 with broken stone aggregate up to 20mm size) of cement concrete and required reinforcement tied in position with annealed black wire including centering, moulding the top, curing including painting concrete surfaces in 23cm strips upto 0.75m from the top alternately in black and white and having 2 nos. reflective band of desired shade etc. complete as per design and as directed. 30 cm dia. RCC guard post with reinforcement of 6nos. 12mm dia TMT main steel bars and 6mm TMT/ MS stirrups at 15cm c/c.

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801. 600mm circular

Bridge No. 1/1 Clearing / Removal of rust from Steel members using sand paper and Iron brush including making and fitting of necessary scaffolding arrangement complete as directed by the Engineer-in-charge.

Greasing of Bearing with ULTRATACK AP3 grease including cleaeing of bearings with steel brush, removal of dusts and dirt with necessary scaffolding etc. complete as directed by the department.

Painting two coats including prime coat with epoxy paint of approved brand on concrete/steel surfaces after through cleaning of surface to give an even shade as per drawing and Technical Specification Clause 1701

Spplying and applying one coat of Zinc based epoxy anticorrosive coating like MasterEmaco P 130 of BASF or euivalent @ 0.2 Lit per Sqm all over the exposed reinforcement over thoroughly cleaned and prepared steel bars including formwork as directed and specified by the department complete.

RCC Guard Post: Supplying, fitting and fixing RCC guard post 150cm long erected 75cm above the ground and 75cm below the ground with M-15 grade (nominal mix 1:2:4 with broken stone aggregate up to 20mm size) of cement concrete and required reinforcement tied in position with annealed black wire including centering, moulding the top, curing including painting concrete surfaces in 23cm strips upto 0.75m from the top alternately in black and white and having 2 nos. reflective band of desired shade etc. complete as per design and as directed. 30 cm dia. RCC guard post with reinforcement of 6nos. 12mm dia TMT main steel bars and 6mm TMT/ MS stirrups at 15cm c/c.

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801. 600mm circular

Providing and erecting direction and place identification retro-\reflectorised sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3, fixed over aluminium sheeting, 2 mm thick with area exceeding 0.9 sqm supported on mild steel angle iron posts 75 mm x 75 mm x 6 mm, 2 Nos. firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per approved drawing and Technical Specification Clause 1701

PCC M15 Grade leveling course below approach slab complete as per drawing and Technical specification

Reinforced cement concrete approach slab including reinforcement and formwork complete as per drawing and Technical specification. TMT-IS 1786 ( Fe-500 D) Secondary Producer (ISI approved)

Bridge No. 4/1 Clearing / Removal of rust from Steel members using sand paper and Iron brush including making and fitting of necessary scaffolding arrangement complete as directed by the Engineer-in-charge.

Greasing of Bearing with ULTRATACK AP3 grease including cleaeing of bearings with steel brush, removal of dusts and dirt with necessary scaffolding etc. complete as directed by the department.

Painting two coats including prime coat with epoxy paint of approved brand on concrete/steel surfaces after through cleaning of surface to give an even shade as per drawing and Technical Specification Clause 1701

Spplying and applying one coat of Zinc based epoxy anticorrosive coating like MasterEmaco P 130 of BASF or euivalent @ 0.2 Lit per Sqm all over the exposed reinforcement over thoroughly cleaned and prepared steel bars including formwork as directed and specified by the department complete.

RCC Guard Post: Supplying, fitting and fixing RCC guard post 150cm long erected 75cm above the ground and 75cm below the ground with M-15 grade (nominal mix 1:2:4 with broken stone aggregate up to 20mm size) of cement concrete and required reinforcement tied in position with annealed black wire including centering, moulding the top, curing including painting concrete surfaces in 23cm strips upto 0.75m from the top alternately in black and white and having 2 nos. reflective band of desired shade etc. complete as per design and as directed. 30 cm dia. RCC guard post with reinforcement of 6nos. 12mm dia TMT main steel bars and 6mm TMT/ MS stirrups at 15cm c/c.

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801. 600mm circular

Bridge No. 5/1 Clearing / Removal of rust from Steel members using sand paper and Iron brush including making and fitting of necessary scaffolding arrangement complete as directed by the Engineer-in-charge.

Greasing of Bearing with ULTRATACK AP3 grease including cleaeing of bearings with steel brush, removal of dusts and dirt with necessary scaffolding etc. complete as directed by the department.

Painting two coats including prime coat with epoxy paint of approved brand on concrete/steel surfaces after through cleaning of surface to give an even shade as per drawing and Technical Specification Clause 1701

Spplying and applying one coat of Zinc based epoxy anticorrosive coating like MasterEmaco P 130 of BASF or euivalent @ 0.2 Lit per Sqm all over the exposed reinforcement over thoroughly cleaned and prepared steel bars including formwork as directed and specified by the department complete.

RCC Guard Post: Supplying, fitting and fixing RCC guard post 150cm long erected 75cm above the ground and 75cm below the ground with M-15 grade (nominal mix 1:2:4 with broken stone aggregate up to 20mm size) of cement concrete and required reinforcement tied in position with annealed black wire including centering, moulding the top, curing including painting concrete surfaces in 23cm strips upto 0.75m from the top alternately in black and white and having 2 nos. reflective band of desired shade etc. complete as per design and as directed. 30 cm dia. RCC guard post with reinforcement of 6nos. 12mm dia TMT main steel bars and 6mm TMT/ MS stirrups at 15cm c/c.

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801. 600mm circular

Abdul Jobber Ali

Md Nabirul Islam

SAMIN PATHAK

S R Construction

M/S Prakalpa

ABBAS SARKAR

SAMSUL HOQUE

EUSUF ALI PRAMANIK