REPAIR TO DRAIN FENCING AND HARDSTANDING ROOFING OF DOMESTIC AREA AND FIRING RANGE AT AIR FORCE STATION PATHANKOT

Amount

Material & Laying for dismantling of existing fencing of any description,shape etc complete all as specified and as directed by Engineer-in-Charge.

Material & Laying for dismantling of existing posts or struts any description (wood, steel or R.C.C.) any section, includinguding taking out embedded portion and making good disturbed portion. Post embeded in natural ground complete all as specified and as directed by Engineer-in-Charge. .

Excavation in post holes each not exc 0.5 cum in any type of soil, getting out, returning, filling in and ramming each or broken rubble mixed with each around in layers not exc 25 cm complete all as specified and as directed by Engineer-in-Charge.

Material & Laying for PCC in 1:4:8 type D2 (using 40mm graded crushed stone aggregate ) as in foundation filling and mass concrete complete all as specified and as directed by Engineer-in-Charge.

Supply & Fixing for mild steel as in posts and struts, angle as in fencing includinguding cutting tops to shape as directed drilling holes notching for wire etc flat iron fillets (for securring wire mesh etc) includinguding all necessary drilling bolting or riveting etc and similar work like purlins , rafter etc for sheds confirming to Fe-290 Gde E-165 complete all as specified and as directed by Engineer-in-Charge.

Material & Laying for Steel work in tubular trusses includinguding special shaped washer etc. for parking shed complete using ERW or induction butt welded tubes conforming to I. S.1161 1979 grade St.-240 complete all as specified and as directed by Engineer-in-Charge.

Supply & Fixing for mild steel screw bolts machine made with hexagoanl or square heads at one end and screwed the other on screwed both ends each screwed to be fitted with washers and one hexagonal or square nut langth of boltn exc 5cm long and 11 to 15 mm dia complete all as specified and as directed by Engineer-in-Charge.

Supply only for chain link fencing any mesh size and type to any type of standards rails straining bolts etc includinguding provission of binding wire complete all as specified and as directed by Engineer-in-Charge.

Material & Laying for Mild steel round bars 10 mm dia and over cut to ength ,bent to shape required as in line wires in chainlink fecing conforming to Fe 290 Gde E-165 complete all as specified and as directed by Engineer-in-Charge.

Fixing only chain link fencing includinguding line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. includinguding provision of binding wire complete all as specified and as directed by Engineer-in-Charge.

Material & Laying painting with black bitumonous paint two coats over a coat of red oxide primer including preparing the new untreated steel surfaces of any description over 10cm in width or girth complete all as specified and as directed by Engineer-in-Charge.

Material & Laying for preparation of new or previously untreated steel or iron surfaces of any description, not exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red-oxide primer complete all as specified and as directed by Engineer-in-Charge.

Material & Laying painting with synthetic enamel paint two coats over a coat of red oxide primer including preparing the new untreated steel surfaces of any description over 10cm in width or girth complete all as specified and as directed by Engineer-in-Charge.

Supply & Fixing Galvanised 2 strand steel barbed wire 2.24mm dia, barbed with 2.00 mm dia barbs at 75mm spacing, straining and fixing to any standard rails and straining bolts including securing or typing at crossing with and provisions of galvanised mild steel wire stapples or steel pins etc complete all as specified and as directed by Engineer-in-Charge.

Refixing (obtained from taking down)Galvanised 2 strand steel barbed wire 2.24mm dia, barbed with 2.00 mm dia barbs at 75mm spacing, straining and fixing to any standard rails and straining bolts including making straight the bent barbed wires, securing or typing at crossing with and provisions of galvanised mild steel wire stapples or steel pins etc complete all as specified and as directed by Engineer-in-Charge.

Material & Laying prepration of old painted steel surfaces of any description, by scrapping off old marks, tints of any kind, not other wise described over 10 cm width or girth and applying one coats of synthetic enamel paint by spray painting , white or tinted complete all as specified and as directed by Engineer-in-Charge.

Material and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 includinguding making joints with or without groovesv (thickness of joints except at sharp curve shall not to more than 5 mm), includinguding making drainage opening wherever required complete all as specified and as directed by Engineer-in-Charge.

Material & Laying for 60 mm thick Machine pressed coloured (red/yellow combination) precast cement concrete interlocking paver block with rubber moulding and glossy finish any shape and sizs as directed, confirming to IS 15658-2006, M-35 Grade as in floor etc. with grey cement and pigment complete all as specified and as directed by Engineer-in-Charge.

Material & Laying for precast Cement concrete paver block of thickness 80mm with matt finish of M-40 grade , laid in design ( as approved and sample kept in GE office) by combination of two size of blocks 8 inch x 4 inch ( grey) and 4 inch x 4 inch( Coloured) as per the sample kept in GE office complete all as specified and directed by Engr-in-Charge.

Material & Laying for 80 mm thick Machine pressed coloured (red/yellow combination) precast cement concrete interlocking paver block with rubber moulding and glossy finish any shape and sizs as directed, confirming to IS 15658-2006, M-40 Grade as in floor etc. with grey cement and pigment complete all as specified and as directed by Engineer-in-Charge.

Material & Laying for sand filling under floors,(paver blocks) of required thickness n. exc 50mm thick, spreading and levelling complete all as specified and as directed by Engineer-in-Charge.

Material & Laying for dismantelling and refixing paver blocks of any description after proper sand filling and maintaining proper slope and necessary repair complete all as specified and as directed by Engineer-in-Charge.

Material & Laying for Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with white cement and pigment complete all as specified and as directed by Engineer-in-Charge.

Material & Laying for 75mm thick PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in sub base of flooring to recive pavers complete all as specified and as directed by the Engineer-in-charge.

Material & Laying for 100 mm thick PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in sub base of flooring to recive pavers complete all as specified and as directed by the Engineer-in-charge.

Material & Laying for 40mm thick Cement concrete type B- 1, 1:2:4 (20mm graded crushed stone aggregate) as in floors finished even and smooth with using extra cement complete all as specified and as directed by Engineer-in-Charge.

Material & Laying for Hardcore of gauge of broken stone or boulders n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface as in sub base to floors complete all as specified and directed by Engineer - in- charge.

Material & Laying for PCC 1:2:4 Type B-1 (using 20mm graded crushed stone aggregate) as in rounded or chamfered on edges or in coping to top of brick work in any description or other similar works including necessary formwork complete all as specified and as directed by Engineer-in-Charge.

Material & Laying for dismantelling AC sheets( corrugated/ semi corrugated, etc. ) in any position complete all as specified and as directed by Engineer-in-Charge.

Supply & Fixing Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof coverings/cladding to wall,fixed with self tapping screws including washers complete all as specified and as directed by Engineer-in-Charge.

Supply & Fixing Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in ridge or sheeting,fixed with self tapping screws including washers complete all as specified and as directed by Engineer-in-Charge.

Material & Laying for cutting holes in brick/ stone walls built in cement /lime mortar for inserting holdfasts/iron frames and making good the dismanteled portionin cement concrete 1:2:4, type B1 as required of size 15 x 15x 15cm of PCC block complete all as specified and as directed by Engineer-in-Charge.

Demolition of cement concrete in ground floors and pavings n exc 15cm thickness(below or above ground level) Complete includinguding removal of debries from the site not exceeding 50 metre all as specified and complete all as specified and as directed by Engineer-in-Charge.

Demolition of brick masonry of any description built in cement mortar of any description complete all as specified and as directed by Engineer-in-Charge.

Material & Laying for brick work with old size bricks straight or curved on plan exc 6m mean radius, built in Cement Mortar 1:4 complete all as specified and as directed by Engineer-in-Charge.

ditto as above but except bricks complete all as specified and as directed by Engineer-in-Charge.

Material & Laying for forming fair finished drain or channel 30 cm inner girth in cement concrete , using extra cement, includinguding forms, moulds, mi- tred/stopped ends etc complete all as specified and as directed by Engineer-in-Charge.

Material & Laying for Cement concrete 1:3:6 type C2 ( using 40mm graded crushed stone aggregate) as in surface channels and drains complete all as specified and as directed by Engineer-in-Charge.

Material & Laying rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and fair complete all as specified and as directed by the Engineer-in-charge.

Taking down cement plaster on brick wall or cement lime plaster,any description etc including racking out joints hacking for key scrubbing down with water etc complete all as specified and as directed by the Engineer-in-charge.

Providing precast reinforced cement concrete 1:2:4, type B-1 (using 20 mm graded crushed stone aggregate)as cover slabs (for drain etc.), slabs supported on walls etc with plain faces includinguding chamfers, weatherings, throating etc. and setting in cement mortar 1:6 complete with joints to match includinguding form work complete all as specified and as directed by the Engineer-in-charge. ( Note:-Reinforcement will be measured and paid separately under the respective item).

Material & Laying for mild steel TMT bars 10 mm dia and over cut to length, bent to shape and binding with and includinguding mild steel wire (annealed) not less than 0.9 mm dia or securing with clips etc complete all as specified and as directed by Engineer-in-Charge.

Material & Laying for MS angle iron frame work for Manhole frame includinguding necessary cutting , welding ,drilling ,bolting etc as required complete all as specified and as directed by Engineer-in-Charge.

Material & Laying for preparation of old decorated plastered or unplastered surfaces of Walls by brooming down or steel wire brushing ,scrapping down smoke soots, moulds and efforescent salts and trading oil and greasy spots including cornices washing down etc and applying one coat of Exterior Weather Coat paint in cameoflaguing pattern/grey colour, white or tinted includinguding taking down existing grass, vegetation, small tree and making good the disturbed surface with Cement Mortar (1:3) complete all as specified and as directed by Engineer-in-Charge.

Material & Laying preparation of new plastered surface of external wall surface applying two coat of Exterior Weather Coat paint in camouflaging pattern/grey color including curing and priming coat complete all as specified and as directed by Engineer-in-Charge.

dadwal engineers (BID ID -3332637)

M/S NAVEEN PATHANIA (BID ID -3334288)

M/S P.S CONSTRUCTION CO (BID ID -3325053)

Vijay Kumar Contractor and Engineers (BID ID -3323999)

pardeep singh marwaha (BID ID -3324287)

A R ENTERPRISES (BID ID -3320999)