WARD NO 20 SANEG PUR ME CORNEL RAI KE KHET SE RAM PRAVESH RAJBHAR KI DUKAAN HOTE HUWE RAMAKANT RAI KE KHET TAK PITCH ROAD KA NIRMAN KA KARYA

Cleaning of site silt etc all complete

Earth work in filling including cutting cortage up to 8.00 km distance loading and unloading etc all Complete. Si No. 253 (A)

WBM Grading-2 Providing, laying, Spreading &compacting stone aggregate of specifie size of water bound macadam specification including spreading in uniform thikness hand packing, rolling with smooth wheel roller 80-100Kn in stages to proper grade and camber applying and brooming stone screening to fill up the

WBM Grading-3 Providing layidng, spreading and copmpacating Graaded stone of specifie size to water bound macadam specefication including spreading thickness hand packing rolling with smooth wheel roller 80-100 kn in stage proper grade and camber of applying and

Prime Coat: Providing & applying Primer coat with bitumen emulsion (SS,1) on prepared Surface of granular base including cleaning of road surface and spraying primer at the rate öf 0.70kg/sqm using mechanical means as per clause 502.

Tack Coat: Providing and applying tack coat with bitumen VG-10 using pressure distributor on the rate of 0.35kg/ sqm on the prepared bituminous surface cleaned with mechanical broom as per clause 503.

Premix Carpetting: Providind laying and rolling of premix carpet of umm twickness composed of 13.2mm to 5.6mm aggregates either using penetration grade bitumen or emulsion to required line grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80- 100kn static roller capacity.Finished to required level and grades to be follwed by seal coat of either as per

Brick edging on both side of the S.O.B bick 8 cm(3") wide and 12 cm (4 1/2) deep laid with mud mortor all labour finished to the required Including etc all complete.

Seal coat: Providing and laying seal coat cleaning the voids in a bituminous surface laid to the spesifide levels, grade and cross fall using type C as per technical specification clause 510.

Cartage of materials by head load up to 3.00 (chainage) lead. S.I.No. 231 (A)