Loading
Loading…
Loading…
Tender Value
₹8.3 L
EMD Value
₹16,700
Closing Date
29 Jul 2026, 5:00 pm4d left
Executive Engineer
EXECUTIVE ENGINEER D.W. and S.DIVISION NO.1 DUMKA
Construction of HYDT well and Providing DC Solar Motor Pump complete set in Gopikandar and Raneshwar Block in different Villages under Drinking Water and Sanitation Division No. 01, Dumka.
2026_DWSD_116439_5
DWSD/DUMKA-1/ 07/2026-27
Open Tender
Civil Works
Turn-key
15 days
Dumka
Please refer Tender documents.
2 documents required · 2 mandatory
₹1,250
₹16,700
Yes
23 Jul 2026
23 Jul 2026
30 Jul 2026
23 Jul 2026
29 Jul 2026
23 Jul 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | HYDT :
Cost of drilling 200mmX165mmX280 Mtr deep bore well in all kinds of soil and rock in rural area for installation of pump bore set with Hydraulic DTH Rig machine, all complete including supplying all materials, tools, drilling rig, Air Compressor and equipments, as well as fuel, lubricants and cost of transportation of Rig machine and other vehicles up to the site. | - | - | - | - |
| 2 | (a) 0.00m Up to 50.00m depth below G.L. In Rural Areas (DWSD 116) | 50 | P/M | 847 | ₹42,350 |
| 3 | (b) Above 50.00 m depth. In Rural Areas | 230 | P/M | 884.4 | ₹2,03,412 |
| 4 | Supplying all tools, tackles & lowering of 200 mm dia MS ERW casing pipe of 6mm wall thickness including welding charges, cost of pipe etc. all complete job. (DWSD Item 117) | 15 | P.M | 1,760 | ₹26,400 |
| 5 | Supplying all materials, labour, tools & equipments for fitting & fixing 200mm dia MS cap over casing pipe complete job. (DWSD Item 117 B) | 1 | Each | 242 | ₹242 |
| 6 | Designing, Supplying, Installation, Testing & Commissioning with all tools & Parts of following Solar Photovoltaic (SPV) Solar Submersible D.C. Water Motor Pump Suitable for minimum 125mm x 115mm bore well as per MNRE Guideline with following specifications & accessories. | - | - | - | - |
| 7 | SPV arrays contains specified No of same capacity type & specification modules connected to series or parallel to obtained the required voltage & current the power output of individual PV modules should be minimum 200 watt peak. | - | - | - | - |
| 8 | i) The SPV modules should be as per IEC-61215 and IEC 61730 part 1.0) | - | - | - | - |
| 9 | ii) All external parts of motor pump used in submersible pump which are in contact of water is stainless steel grade 303 or higher as required. | - | - | - | - |
| 10 | iii) The PV modules should be mounted on metallic structure of adequate strength and appropriate design which can withstand load of modules & High wind pressure up to 200Km/h. | - | - | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 2.65 MB
BOQ_157379.xls
BOQ • 0.60 MB
TermConditions.pdf
Tender Documents • 1.18 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].