TOILET WORK 133AD

Clearing light/scrup jungle and disposal of waste away from the site as directed by the federation engineers and as per standard specification.

Earth work excavating and depositing on bank with initial lead of 10m & initial lift of 2m in Sand, silt or other loose soil, wet sand or silt not under water, light black cotton soil sandy loam and ordinary soil including excavated earth etc Complete as directed by the federation engineers and as per standard specification.

Supply and filling with clean M- sand for foundation and basement etc Complete as directed by the federation engineers and as per standard specification

Plain Cement concrete 1:5:10 (one part of cement and five part of sand and ten part of aggregate) 40mm size HBG stones for foundation including de-watering if found necessary and laid in layer of not more than 15cm thick etc, Complete as directed by the federation engineers and as per standard specification.

Supply, erecting steel centering using M.S sheet of size 90x60cm and B.G 10 gauge stiffened welded with MS 'L' angle 25x25x3mm laid over silver oak/country wood joist of size 10x6.5cm spaced at about 90cm center to center spacing etc complete and removing the same after a specified period etc, complete as directed by the federation engineers and as per standard specification. Upto basement.Plain Surface

Providing and laying of Reinforcement Cement concrete 1:2:4 (one part of cement and two part of sand and four part of aggregate) using 20mm size HBG stone jelly including curing, labour charges etc complete as directed by the federation engineers and as per standard specification. Upto Ground Level - Upto Basement

Supply, fabricating and placing in position of steel rods for RCC works including binding wire(Black -18G) and Fitter (Pipe laying / Bar bending) I class . etc complete as instructed by the federation engineers and as per standard specification.

Brick work in CM 1:5 (one part cement and five parts sand) using second class ground moulded chamber bricks of size 9”x 4½”x 3” to line and level including necessary curing ,Bricks II class ground mould chamber burnt, labour charges, lifting charges etc. complete as instructed by the federation engineers and as per standard specification. Basement

Brick partition walls of 11.50cm thickness using best quality II class Ground moulded chamber burnt bricks of size 9" x 4-1/2" x 3" in Cement Mortar 1:3 (One Cement and Three M-Sand) using hoop iron reinforcement if found necessary including curing etc. complete and as directed by the departmental officers. Ground Floor

Plastering with cement mortar 1:5 (one part of cement and five parts of sand) 12mm thick including labour charges scaffolding, neatly finishing and curing etc complete as directed by the federation engineers and as per standard specification. (INNER PLASTERING)