SPECIAL REPAIR TO PI MESS -II BLOCK -I AND BLOCK -II, URINAL AT BOY CDT BLOCK 3, 4 AND 11 AND KITCHEN FOR YEP BLOCK AT DG NCC UNDER GE (EAST) DELHI CANTT

Amount

Demolition of cement concrete (reinforced) of any position not otherwise specifically provided for and including reinforcement required to facilitate demolition upto and including fourth story and on the roof top/mumty/parapet and removal of debris and rubbish out side MoD land complete all as specified and directed.

Demolition of brick work built in cement mortar in any description and position complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in Ground floors and paving n.exe 15cm thickness ( below or above ground level ) including removal of rubbish out side complex (MOD land), complete all as specified and directed.

Dismantling of PVC water tanks exc 500 ltr but not exc 1000Ltr capacity of any condition or type complete all as specified and directed.

Dismantling of Cast Iron pipe 100 mm bore complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) laid bedded and pointed in any mortar and removal of old tiles from premises complete all as specified and directed.

Taking up or down 15 mm bore GI tubing and connections including cleaning for re-fixing complete all as specified and directed.

All as per item No. 7 here-in-before but 20 mm bore

Taking down chowkhat or frames exc. 1.5 Sqm and n.exc 4 Sqm each with shutters (without taking off shutters from frames) complete all as specified and directed.

Taking down chowkhat or frames not exc. 1.5 Sqm each with shutters (without taking off shutters from frames) complete all as specified and directed.

Taking down cement plaster, terrazzo, grit plaster dado in any thickness from brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc. including removal of rubbish, vegetation etc. outside complex (MOD land) complete all as specified and directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 65x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Make 'Rajshree or equivalent "

All as per item No 12 here-in-before but size of chowkhat 45 x 70mm

S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, including 3 Nos stainless steel butt hinges of size 100mm, 2 Nos 150mm long stainless steel tower bolt and 01 No 250mm long sliding bolt of all as per direction of Engineer-In-Charge. Make 'Rajshree or equivalent "

All as per item no 14 here-in-before but wire mesh door shutter all as per specification.

M&L for Box type steel window 1.25mm thick made of ERW tube P- Section of size 60x25mm double rebated outer frame comprise of gauzed skelton shutter (two gauged shutters and two glazed of ERW tube P- section size 50 X 20 mm and 1mm thick, one/two numbers openable leaf consisting of two number shsh bar of T- section 20mm X 30mm welded to frame with one number vertical mullion of ERW box type T- section of size 60X25 mm and 1.25 mm thick and FI 2 mm thick welded/ screwed to frame for fixing of glass incl fittings and fixture like handle, Tower bolts, stopper, cleat pintal hings, hold fast etc complete all as specified and directed. (a) Holdfast 150mm long of 120mmx 3mm made to shape 04 Nos per window. (b) Handle of Z section 20mmx25mm,100mm long stopper 01 Nos per leaf. (c) MS Tower bolts 150mm long -2 Nos (d) Z section 20mmx25mm, 100mm long stopper 01 Nos per leaf. (e) Cleat 55mm long of hollow square 15mmx20mm x63mm welded hinges 01 No per leaf. (f) MS pintol hings of size 75mmx12mm , 2 Nos per leaf.

M&L for built in steel cup board of pressed steel frame of size 75 mmx45mmx1.25 mm thick with pressed steel shutter 1mm thick with hinges ,Godrej pattern, fixed to masonry wall by hold fast made out of 25x3 mm flat iron including locking arrangement and two coats of spray painting with synthetic enamel paint over one coat of red oxide primer all around on steel surface of frame & shutter and making good disturbed portion in CM 1:3 or pcc 1:2:4 complete all as specified.

S&F for framed MS brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 complete all as specified and directed

S&F for Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof /chhaja covering/cladding to wall, fixed with self tapping screws as specified

M&L for cutting chases, pinning in. making good to facings where required and pointing in CM 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in brick work complete all as specified and directed.

M&L for framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed

M&L for Brick work with sub class 'B' bricks straight or curved on plan to any radius built in CM 1:6 complete all as specified and directed.

M&L for mild steel TMT bars of 10 mm dia and over cut to length bent to shape required including cranking, bending etc and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings, chajjas and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

M&L for RCC (1:2:4) Ty B-1 using 20mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed

Supply only liquid water proofing compound complete all as specified and directed.

M & L 16-18 mm thick granite (Type, Size and colour as approved by GE and as per site requirement) of any type work table rubbed and polished as in floors, wall, steps, jambs, pillars, window cills, cooking platforms and like in over and incl 15mm thick CM (1:4) and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab , notching, moulding and polishing complete all as specified and directed

M & L for glazed ceramic tiles in vertical surface of size 300mmx450mm or 300mmx600mm and 7-8 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over & incl 10mm thick screed bed in CM 1:4 after dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), complete all as specified and as directed.

Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed

M&L for 75mm thick PCC (1:4:8) Ty D-2 using 40mm graded stone aggregate as in sub base of floor complete all as specified and as directed

M & L for pre-polished kota stone slab flooring 16-18mm thick over & including15mm thick cement screed bed in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing after dismantling of existing kota, stone slab of any description complete all as specified and as directed.

M&L for Mirror polishing on marble/ granite/Kota stone/ stone work where ever required incl filling to existing joints to give high gloss finish complete all as specified and as directed

M & L for glossy finished coloured Chequered cement concrete tiles 30cm x 30cm x 20-22mm thick, set, jointed and pointed in neat cement slurry over & including 15mm thick screed bed in CM 1:6 complete all as specified and as directed

M & L for Machine pressed precast concrete interlocking paver block of any shape and size (Two colour combination) conforming to IS 15658-2006 of 60 mm thick, M-35 Grade laid dry in floor/path complete all as specified and as directed

M&L Rendering 12 mm thick in CM 1:6 on fair face of brick work/ concrete surfaces (either surfaces) and finished even and fair complete all as specified and as directed

M&L Rendering 15 mm thick in CM 1:4 on fair face of brick work/ concrete surfaces with water proofing compound finished even and smooth without using extra cement complete all as specified and as directed. Note :- WPC shall be measured and paid separately under relevant item of this Sch/BOQ

M&L Rendering 10 mm thick in CM 1:3 on ceiling, finished even and fair complete all as specified and as directed

S&F 15mm bore GI tubing medium grade with all fittings and fixed to wall and ceiling or laid in floors etc. complete all as specified and directed.

All as per item No 38 here-in-before but 20 mm bore.

S&F white colour Rotational moulded polyethylene water storage tank 2000 liters capacity, white triple layer construction (cylindrical vertical closed top), hoisted & fixed in position including all fittings complete all as specified and as directed.

S&F in repair 15 mm dia brass chromium plated central hole basin mixture, fancy type with or without lettered 'Hot' or 'Cold' ,with long screwed shanks and fly nut capstan head screwed for 15mm dia pipe fixedcomplete all as specified and as directed. (Make Jaquar Florentine FLR-CHR 5273UPR or equivalent in MARC/Kohler)

S&F CP towel rail 600mm long fixed with and including chromium plated brass screws and wooden/plastic cleats (minimum weight 190 gms) fixed on walls, complete all as specified. (Make: Jaquar/ Marc/ Kohler)

S&F in repair bib taps brass chromium plated 15 mm bore size screwed down screwed for iron pipe or for brass ferrule complete all as specified and as directed (make: Jaquar cat no continental CON-CHR-047 KN or equivalent in MARC/Kohler)

S&F Stainless steel grating 125mm dia with canter hole of best quality as approved by GE including fixing in CM 1:4 to floor/nahani traps etc complete all as specified and directed.

S&F rectangular stainless steel drain with grating cover 84mm wide of best quality as approved by GE including fixing in CM 1:4 to floor/traps etc complete all as specified and directed.

S&F in repair Gun-metal globe or gate valves 20mm bore with iron wheel head, screwed both ends for iron complete all as specified and directed.

S&F in repair 20 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed (Minimum weight 210 gms) complete all as specified and directed.

S&F double bowl stainless steel sink AISI 316 grade with drainage board of 1 mm thick with plug , washer and waste, including bedding in cement mortar to dwarf wall or including CP Waste , PVC Down pipe etc. and fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm or more complete all as specified and as directed

S&F CI pipes of 75 mm bore ( single socketed in any length with rubber ring joints and clamps including all fittings/fixtures fixed on wall or in trenches or in floor complete all as specified and directed.

S & F of stainless steel plate rack of size 758 mm x 600 mm including shelves rod to put plates etc., made out of 0.8 mm thick stainless steel sheet, complete all as specified and directed.

S&F in repair UPVC (SWR) floor trap, 75mm dia plain including jointing with solvent cement with grating including jointing to waste pipe in cement concrete complete all as specified and directed.

M&L Cement concrete 1:2:4 type B0(using 12.5mm graded crushed stone agg) as in coping, complete all as specified and directed

Cutting into existing manholes for connecting new drains making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 or 3/4 section ) in cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate finished smooth and reforming benching as required for 150mm bore pipes complete all as specified and directed.

M & L for preparation of new plastered surfaces of internal wall/ceiling and applying 2 coats of oil bound distemper over and including 2mm thick wall care putty and coat of primer complete all as specified and as directed.

M & L for preparation of new plaster external wall and ceiling surfaces of and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over and 2mm thick wall care putty complete all as specified and as directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/ loose soil complete all as specified and as directed

M&L for PCC (1:4:8) Ty D-2 using 40mm graded stone aggregate as in foundation, filling in mass concrete complete all as specified and as directed

S & F for Precast RCC manhole covers 75 mm thick medium duty conforming to IS-12592, including demolition of existing MH cover of any type complete all as specified and as directed.

M&L for Concrete bed to drain pipes including packing under, and hunching against the sides of pipes after they are laid and tested; in cement concrete (1:3:6) ty C-2 using 40mm graded stone aggregate for 200mm bore pipe complete all as specified and as directed

Demolition and breaking up drain pipes (SGSW/AC/RCC) including haunching and benching set in cement mortar for 200mm dia pipe, and removal of debris from site and deposited where directed at a distance n exc 1 Km from site complete all as specified and as directed.

M&L for 200mm dia reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified and as directed

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed

Removing excavated material (Soil) n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed

Taking down plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed

Dismantling framed iron trusses,not exc 10 mtr in span in any position complete all as specified and as directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed

S & F for Factory made UPVC (white/Off White colour casement (Openable) Door made of extruded profile members with wall thickness of 2.3mm (1-0.2mm). Door profile members with hollow section with multi chamber. Frame (60mm x 60mm), sash bars (60mm x 110mm). T-profile (One vertical length in between two shutters 60mmx 74mm). Glazing head (35mmx 20mm) will be mitered cut and fusion welded at all corners, including making of holes for fixing hardware and drainage of water etc, making arrangement for fixing of hardware EPDM gasket 1.2 to 0.02mm thick galvanised steel frame (28mmx21.50mm), sash bars (31mmx27mm). T-profile (27x17mm) to be inserted in required profile frame and will be fixed to wall 8mm x 100mm long fasteners. Hardware: casement door handle made of zinc alloy (white powder coated), Corner striker, Secondary Strikers, Cylinder, Door transmission gear made of mild steel with multi point locking system with striker, Hinges of zinc alloy (white powder coated) and S.S wire mesh 0.36mm nominal dia of wire and average width of aperture 1.40mm, complete all as specified and directed. (Note: The unit rate quoted by contractor includes cost of glass, hydraulic door closure, lock and includes all other connected accessories. Net opening will be measured for payment purpose.)

S&F Aluminium alloy powder coated standard hollow section for ventilators as per approved sample and as per IS specifications, shutters weighting 0.55 kg/RM, rectangular frames of section 101.6mm x 44.45mm x 3.18mm weighing not less than 2.54Kg/RM including provision of 5.5mm thick tinted glass of superior quality including handles, tower bolt, hinges and all standard fittings complete all as specified and directed.

M & L for fabrication & fixing to horizontal & vertical shelves/ partitions /sides/ top/ bottom/back/ front sides etc for cabinate/ wardrobe/ cupboard/drawers made out of 17/18 mm thick WPC boards with white/ coloured laminated on both sides, of approved quality including paste to all exposed edge by Banding Tape including provision of drawers etc complete all as specified and directed. (Make :Action tesa or equivalent)

S & F for soft closure hinges with all fittings at mounting plate of premium quality, fixed in door/cup board shutters complete all as specified and directed (Make : - Godrej/Hettich/IPSA).

S & F Continuous (piano) hinges, stainless steel, width of flap 30mm complete all as specified and as directed.

S & F 150 mm size designer door handle stainless steel chromium plated for Cabinet/Wall Unit/Overhead Unit/Wardrobe etc complete all as specified and as directed.

S & F for Magnetic catches with steel body ‘H’ type, fixed to shutter, complete all as specified.

All as per item no 23 here-in-before but 6 to 8mm dia

All as per item No 23 here-in-before but 6 to 8 mm dia as in stirrups.

M&L for providing reinforced cement concrete (1:2:4) type B-1 using 20 mm graded crushed stone aggregate as in Beams, cantilevers, bressummers, lintels complete all as specified and directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and as directed

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and as directed

M&L for RCC (1:2:4) Ty B-1 using 20mm graded stone aggregate as chajjas complete all as specified and as directed

M&L removing of existing membrane cleaning of concrete or plastered surfaces of roof and applying priming coat using with bituminous primer @ 0.30kg per Sqm followed evenly by a tack coat @ 1.20 kg per Sqm using 85/25 grade industrial hot blown bitumen , over it laid with 3mm thick APP modified polymeric water proofing membrane minimum weight 3.6 Kg per Sqm reinforced with non-woven polyester fabric (weight not less than 160 Gm per Sqm) unrolled & bonded to substrate with side and end laps 75mm & 100mm as per manufacturer’s instruction and finally finished the top of polymeric water proofing membrane with a coat of aluminium paint @ 0.20 ltr per Sqm as per manufacturer’s instructions over, complete all as specified & directed. (including removal of existing membrane and removal of scrape from site) Notes- 1. The Work Shall be executed through authorized applicator of manufacturer. 2. Authorized applicator shall be approved by GE before starting of work. 3. All material shall be procured directly. 4. Guarantee: The contractor shall furnish a written guarantee for the effectiveness of the water proofing treatment for a period of ten years in favour of the GE. A sum equivalent to 2.5% (Two point Five Percent) of the cost of item shall be retained by the Govt from the contractor’s dues as security deposit. The contractor may, however, furnish a fixed deposit receipt in lieu from a Schedule bank pledged in favour of Garrison Engineer.

M & L for glazed ceramic tiles in vertical surface of size 300mmx450mm or 300mmx600mm and 7-8 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over & incl 10mm thick screed bed in CM 1:4 complete all as specified and as directed.

M & L for Non skid coloured ceramic tiles light shade 8-10mm thick square/rectangular) polished, area of each tile n exc 0.16 sqm but n exc 0.36 sqm each in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6 complete all as specified and as directed

M & L for Washed stone grit plaster on exterior walls in two layers (colour and design as approved by GE), under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern (groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove) complete including scrubbing and washing, the top layer with brushes and water to expose the stone chippings including taking down of existing cement or cement lime plaster of any thickness and any description on brick or stone walls including raking out joints, hacking for key and scrubbing down with water, complete all as specified and as directed.

S&F white colour Rotational moulded polyethylene water storage tank 1000 liters capacity, white triple layer construction (cylindrical vertical closed top), hoisted & fixed in position including all fittings complete all as specified and as directed.

M&L for Concrete bed to drain pipes including packing under, and hunching against the sides of pipes after they are laid and tested; in cement concrete (1:3:6) ty C-2 using 40mm graded stone aggregate for 300mm dia pipe complete all as specified and as directed

Demolition and breaking up drain pipes (SGSW/AC/RCC) including haunching and benching set in cement mortar for 150mm to 300mm dia pipe, and removal of debries from site and deposited where directed at a distance n exc 1 Km from site complete all as specified and as directed.

M&L for 300mm dia reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified and as directed

Dismantling of PVC pipe 75 mm bore complete all as specified and directed.

S&F for 100mm long butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and as directed

S&F for 150mm long aluminium anodised, barrel tower bolts of extruded section and fixed to shutters complete all as specified and as directed

S&F 100mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed

M&L Rendering 5mm thick in cement mortar 1:3 as in ceiling finished even and smooth without using extra cement to match with existing surface complete all as specified and directed.

M & L for Non-Skid coloured ceramic tiles 7-8mm thick (square/rectangular) of size 300mmx300mm or 400mmx400mm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6, after dismantling floor, hearth or wall tiling with cement mortar bedding (but not backing), complete all as specified and as directed.

S&F in repair vitreous China wash basin, white, flat back, size 630x450mm with PVC flush pipe 32mm bore including brackets, cutting for and pinning in ends of brackets or erecting stand complete all as specified and as directed

S&F 15mm bore stop cock Auto Closing System, cast copper alloy , fancy type , chromium plated, screwed for iron pipe and fixed complete all as specified and directed. (Make : Jaquar cat part No. PRS-031 or equivalent in Marc/Kohler)

S&F in repair 15 mm dia stop cock/angle cock long shank, cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle, flinch screwed both ends for iron or for union. (Make : Jaquar / Marc/Kohler)

S&F Brass CP Basin mixer central hole for making hot and cold water fixed as per manufacturers manual with long shunk and cup washers, screwed both ends suitable for 15mm bore GI Pipe joints to GI pipes or unions, complete. (Make : Jaquar Continental CON-CHR-167KNB or equivalent in Marc/Kohler)

S&F in repair Stainless steel grating 100mm dia with centre hole of best quality as approved by GE including fixing in CM 1:4 to floor/nahani traps etc complete all as specified and directed.

S & F in repairs Designer type high quality fancy type looking mirror of size 1000mmx 450mm as approved by Engr-in-Charge 8-10mm thick, fixed to wall with stainless steel studs, screws, brackets and washers etc complete all as specified and as directed.

S&F in repair PVC connection 15 mm bore and 45cm long with washers complete all as specified and directed.

S & F in repair SS soap dish, fixed in repairs, complete all as specified and as directed. (Make - Jaquar/ Marc/ Kohler)

S & F in repair vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement with brackets, flush pipe, grating and Union for discharge pipe with grating complete all as specified and as directed

S & F in repair CP brass urinal spreader with pipe suitable for fixing with 15 mm dia pipe complete all as specified and as directed

S & F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 45 cm long complete all as specified and as directed (Make: Jaquar/Marc/Kohler)

S&F 75mm outer dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed

S&F 75 mm bore PVC (SWR) junction single, (Single T), bends equal or unequal complete all as specified and as directed

S&F in repair UPVC (SWR) floor trap, 75mm dia plain including jointing with solvent cement with grating including jointing to waste pipe in cement concrete complete all as specified and directed.

M & L for preparation of new surface decorated brick/concrete/ plastered or unplaster surfaces of walls, pillars, cornices by brooming down etc. and applying two coats of Oil Bound Distemper over a coat of interior primer complete all as specified and as directed

M & L for preparation of new surface decorated brick/concrete/ plastered or unplaster surfaces of on celling surface and applying two coat of oil bound distemper over a coat of interior primer etc. complete all as specified and as directed

M&L for 12mm thick non transparent toughened glass, fixed with stainless steel clips to wall, complete all as specified and directed

Taking down/ out carefully copper/aluminium point wiring for light/fan/bell/ sockets 5/15 Amps complete without accessories as switches, Sockets, holders, ceiling roses, light fitting regulators etc (to be measured and paid separately under relevent item of this Sch as S&F in repair and credit for these item given in credit schedule here-in-after) and making good the disturbed surface complete all as specified and as directed

M&L of point wiring complete with 1.5 Sq mm (nominal area) FRLS PVC insulated sheathed and multistranded copper conductor cable ISI marked and including PVC concealed conduit ISI marked of size 20 mm dia medium grade and fittings such as tees, bends, elbow, and FRLS PVC insulated unsheathed 1.5 Sqmm copper conductor mulistranded earth wire, connecting to common earth dolly including Metal Flush Box, Cover plate with frame, cutting chases and making good disturbed surface in CM 1:3 to match with existing surface for one light point exhaust fan point controlled by one 1-way switch complete all as directed. (a) one light point / fan point/ wall fan point/ bell/ buzzer controlled by one 1-way switch/ bell push.

(b) one socket outlet point 5 amps on the same board.

(c) one socket outlet point 5 amps on the independent board.

(d) All as per Srl Item No 114 here-in-before but with 4 sq mm FRLS copper wire with 4 Sqmm FRLS copper earth wire for independent point.

S&F in replacement Modular switch 6 Amp, 1 way, 1 module size complete all as directed.Make-Indoasian shynora,Anchor Roma,Legrand Arteor or equivalent.

S&F in replacement Modular socket 6 Amp, 2/3 pin, universal type, 2 module size complete all as directed.Make-Indoasian shynora,Anchor Roma,Legrand Arteor or equivalent.

S&F in replacement Modular switch 16 Amp, 1 way, 1 module size complete all as directed.Make-Indoasian shynora,Anchor Roma,Legrand Arteor or equivalent.

S&F in replacement Modular socket 16 Amp multipurpose shuttered type, 2 module size with indicator lamp complete all as directed.Make-Indoasian shynora,Anchor Roma,Legrand Arteor or equivalent.

S&F in replacement Ceiling rose, insulated body, 3 terminal, 240 volts, 5 Amps and making good surface as original by plastering and whitewash/ colour/ distemper etc complete all as directed.

S&F in replacement of Modular AC 25 Amp SP mini MCB, 230 Volts, 50 Hz suitable for module sheet complete all as specified and as directed.

S & F in replacement surface and wall mounted LED tube light fitting with polycarbonate housing & interated electronic driver with tube rod of 20 Watt. slim elegant design.and including connected with 3 core 23/0.0076 insulated copper wire from celing rose to fittting connector all as specified and directed.

S&F of LED bulk head fitting 10W with inbuilt driver complete all as specified and directed.

Taking down ceiling fan/ Exhaust fan any size sealing cable end, dismentling blades and depositing in MES store yard. complete all as specified and as directed.

M&L Sub main wiring with 2 run of 10.0 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, PVC concealed conduit 25 mm dia with all fittings and including 10.0 Sqmm (nominal area) FR, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire including cutting chases and making good in CM 1:3 and making good disturbed surface to match with the exisitng surface, connected with thimble from main DB to sub main DB complete all as directed.

S&F exhaust fan made metalic body, heavy duty and making electric connection, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 450 mm complete all as specified and as directed.

S&F in replacement of MCCB incommer Distribution Board ( Vertical Load line DB) double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, VTPN 04 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCCB as incommer and MCB as outgoing and making all necessary connections and taking out the old unserviceable DB complete all as directed. Note:- MCCB & MCBs will be measured and paid separately

S&F in replacement MCCB 3 Pole, 100 Amp with breaking capacity 16 KA suitable for 415 volts AC supply, with over load and short circuit protection complete all as specified.

S & F in replacement MCB DB confirming to IP 43 - IK 09 with double door , SPN 12 way complete with din rail Neutral and earthing bar after taking out the oldunserviceable DBs connection and making good the disturbed surfaces complete all as specified and as directed.

S&F in replacement MCB SP, B Curve type, 10 KA, 10 to 32 Amp, with over load and short circuit protection complete all as directed.

S&F in replacement MCB SPN B Curve type, 10 KA, 63 Amp, with over load and short circuit protection complete all as directed.

Taking down water heater (Geyser) 25/35/50 ltre capacity, and depositing to MES store yard.complete all as specified and as directed.

S&F electric water heater of capacity 25 litre, vertical storage type, steel inner tank with glass linen 5 star rating, withstand 8 bar pressure complete with all accessories such as heating element, pressure relief check safety valve, thermostat, connection piece, 3 core wire with plug etc all as specified and as directed.

S&F Steel fastner of 4" long and 8mm dia with Nuts & washer complete all as specified and as directed.

S&F steel wired connection 600mm long and C P brass adopter 15 mm dia with washer for hot and cold water from geyser and to withstand 8 bar pressure of water complete all as specified and as directed.

S & F in replacement energy efficicent LED fittings 45W LED 6K suitable for builing security light pressure die cast aluminium roadway luminaire with high power LEDs and HF electronic driver complete all as directed.

S&F in replacement of street light fitting bracket, 1.0 mtr long bent to shape made out of galvanized iron pipe of 25 mm dia size light grade complete with nut, bolts, washer, clamps etc inclusive of one primer coat, one under coat and one finishing coat of silver paint complete all as directed.

M&L earthing with galvanised steel plate electrode 600 x 600 x 6 mm thick, buried directly in ground( earth pit not less than 2.25m deep below ground level) with top edge of plate not less than 1.5 m deep below normal ground level , connected to and including galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, washers of galvanised steel earth strip protected by and including 20 mm bore “light grade” and connected to main test point as directed and including concrete pit in PCC(1:3:6) type C1 precast RCC M-25 (design mix) precast cover slab (54 x 54 x 5 cm) duly reinforced with and including 8 mm dia TMT steel bars @ 150 mm C/C both way, one lifting handle made of 8 mm dia TMT bar embedded in precast cover slab, funnel, wire mesh, 20 mm bore GI medium grade pipe for watering, charcoal and salt in alternate layers, including necessary excavation and earth work any type of soil complete all as specified and shown in electrical plate No. 5 of SSR Part –I including testing on completion complete all as specified and directed.

S& F in replacement modular Step Fan regulator, 120/70 watts single / double module, fixed in repairs, complete all as specifed and as directed.Make-Indoasian shynora,Anchor Roma,Legrand Avtear or equivalent.

S & F ceiling fan(BLDC) 1200 mm sweep, 5 star rating regulator operated, service value not less than 6.0, 240 volts, 240 Volts. 50 Hz and depositing the old u/s to MES store yard complete all as specified and directed .

S & F Exhaust fan upto 300 mm sweep metalic body heavy body type and making all electric connections complete all as specifed and as directed.

S&F electric water heater of capacity 50 litre, vertical storage type, steel inner tank with glass linen 5 star rating, withstand 8 bar pressure complete with all accessories such as heating element, pressure relief check safety valve, thermostat, connection piece, 3 core wire with plug etc all as specified and as directed.

Supply and fix, laying & testing in replacement cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminum conductor of size 10 sqmm 2 core all as per IS complete all as specified and as directed

M&L in replacement sub main wiring with 2 run of 4.0 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, PVC concealed conduit 25 mm dia with all fittings and including 4.0 Sqmm (nominal area) FR, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire including cutting chases and making good in CM 1:3 and making good disturbed surface to match with the exisitng surface, connected with thimble from main DB to sub main DB complete all as directed.

S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm and depositing the old U/s item to MES store yard complete all as directed

S&F of instant heating Geyser 03 liter capacity vertical type with steel tank and glass inner linen complete including fasteners (02 No) for hanging and CP and PVC connection for inlet and outlet upto stop cock including taking down old existing geyser & depositing to MES store yard complete all as specified and as directed.

Akhil Enterprises (BID ID -3371093)

THE LOTUS BUILDTECH (BID ID -3369209)

garnet engineers contractors (BID ID -3370075)

Atish Builders LLP (BID ID -3364896)

M/s Shubh Enterprises (BID ID -3371402)

M/S Rohit Enterprises (BID ID -3379385)