ADDN ALTN TO AMENITY ROM OF INDUSTRIAL STAFF CONSTR OF 08 X WASHING POINT WITH 1000 LTR WATER TANK ALONG WITH BASE STAND AND CERTAIN MINOR WORKS AT KANKINARA UNDER GE NORTH KOLKATA

Amount

Surface excavation not exe 30cm deep and averaging 15cm deep getting out in soft /loose soil complete all as specified and as directed

Demolition of Stone sett paving laid bedded and pointed in any mortar of any description or thickness complete all as specified and as directed.

Excavation in trenches n exc 1.5 m wide and n exc 1.5 m depth for foundation etc, n.exc 10 sqm on plan and n.exc 1.5 m in depth and getting out in soft and loose soil complete all as specified and as directed.

Excavation in trenches exc 1.5 m wide and n exc 3.0 m depth for foundation etc, n.exc 10 sqm on plan and n.exc 1.5 m in depth and getting out in soft and loose soil complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed

Material and labour for cement concrete type D2, 1:4:8 (using 40mm graded stone aggregate) in foundation filling and mass concrete complete all as specified and as directed

M&L for RCC Foundations Type B1 1:2:4 (using 20mm graded stone aggregate) including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed

M&L for RCC Foundations Type B1 (1:2:4 ) (using 20mm graded stone aggregate) Columns, pillars, piers, posts and struts complete all as specified and as directed

M&L RCC 1:2:4 (using 20mm graded aggregate) in Slab supported on walls, beams and columns in floor, roofs, landing, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed

M&L RCC (using 20mm graded aggregate) in Chajja complete all as specified and as directed

M&L RCC 1:2:4 (using 20mm graded aggregate) in Beams, cantilevers, bressumers, lintels over 1.5m span, complete all as specified and as directed

Formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and as directed

Formwork to soffit of suspended slabs such as roof slabs, floor slabs, landing and similar work n. exc 200 mm thk (horizontal or sloping) complete

Formwork to chajjas, troughs and similar items incl edges complete all as specified and as directed

Formwork to sides and soffit of floor or roof beam, lintels, shleves including supports, etc. complete all as specified and as directed

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and as directed

Material and labour Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed

Material and labour for brick work with brick class gesignation 75, old size,straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) complete all as specified and as directed

Material and Labour for 25 mm thick D.P.C to horizontal surface of brickwork with cement concrete 1:2:4 type B0 ( using 12.5 mm graded stone aggregate ) including necessary formwork and applying evenly a coat of blown type bitumen @ 1.50 Kg per sqm and blinding with clean dry sand @ 0.05 cum per sqm complete all as specified and as directed.

Material and Labour for sand filling under floor including watering and consolidation complete all as specified and as directed .

Material and labour for 100 mm thick PCC 1:2:4 type B1 using 20 mm graded aggregate for flooring complete all as specified and as directed.

M&L Chequered cement concrete tiles 30cm x 30cm x 25mm thick, over 20 mm thick screed bed or bedding layer of mortar in CM (1:6) for laying floor finishes set, jointed with grey cement and pigment and pointed in neat cement slurry in floorscomplete all as specified and directed.

Material and labour for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but n.exc. 0.18 sqm as in floors laid over 15mm thick screed bed in CM(1:6) including set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

Material and labour for glazed ceramic colour tiles (300x300) x7mm thick in skirting/dados etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour tiles over and including 10mm thick backing layer/rendering in CM(1:4) complete all as specified and as directed.

Material and labour for rendering 15mm thick in cement mortar (1:6) on fair faces of brickwork or concrete surfaces, finished the surfaces even and smooth without using extra cement complete all as specified and as directed.

Material and labour for 5mm thick cement plaster in Cement mortar (1:3) on ceiling finishing the surface even and smooth without using extra cement complete all as specified & directed.

Material and labour for applying three coats of white wash on new plastered surface of wall including preperation of newly plastered surface complete all as specified and as directed .

Material and labour for applying three coats of white wash on new plastered surface of ceiling including preperation of newly plastered surface complete all as specified and as directed .

Material and Labour for 20 mm thick rendering with CM 1:4 in two layer , 10 mm thick in each layer and mixed with integral water proofing liquid admixture on top layer of external surfaces of brick work or concrete surfaces including finish the surface even and fair complete all as specified and as directed (Water proofing liquid admixture shall be measured and paid seperately)

M&L for Water proofing treatment with APP based standard membrane over PCC padding of roof with the following course of treatment:- (a) Apply bituminous primer @ 0.40 Kg/Ltr per sqm of the surface area including cleaning the surfaces (b) Apply APP plastomeric bituminous based mineral finished water proofing membrane polyster reinforced(4Kg/sqm) with 10 cm over laps and torch bonded at joints including surface preparation and after application of treatment as per manufacturers instruction complete all as specified and as directed

Supply and fix Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed

Supply and fix factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed

Supply and fix 100mm size extruded aluminum alloy handle fabricated type anodized (ISI Marked) complete all as specified and as directed.complete all as specified and as directed

Supply and fix 100mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

Supply and fix 100 mm long MS butt hinge , medium weight , cold rolled complete all as specified and as directed .

Supply and fix Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and as directed .

Supply and fix 3.0 mm thk sheet glass ordinary quality and glazing with oil putty in square n. exc 0.50 sqm in each pane, complete as specified and as directed.

Material and labour for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending lapping etc. as required complete all as specified and directed.

Material and labour for mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders as required complete all as specified and directed.

Supply and fix 15mm bore medium grade galvanized steel tubes with all fittings and fixed to wall and celing or laid in floors etc complete all as specified and as directed.

All as per item No. 41 above but 20mm bore.

Supply and fix wash hand basin , white , flat back of size 550 x 400 mm including brackets complete all as specified and as directed .

Supply and fix vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including 'P'or 'S' trap (excluding flushing cistern and flush pipe) including provision of lime concrete bedding complete all as specified and as directed

Supply and fix urinal Vitreous China size 625x375x315mm white including necessary fittings complete all as specified and as directed.

Supply and fix 10 litre capacity PVC valve less, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC 32 mm dia, for low level cistern including PVC connections 15mm size with brass nuts and washer both side of length 450mm complete all as specified and as directed.

Supply and fix 15 mm bore pillar tap Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed .

Supply and fix 15 mm bore bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed

Supply and fix 15 mm bore Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed .

Supply and fix 32 mm dia waste coupling of PTMT full threaded complete all as specified and as directed .

Supply and fix PVC connection 15 mm bore with PTMT nut of length 600 mm complete all as specified and as directed

Supply and fix 20 mm bore gun metal gate valve with iron wheel head,screwed both ends complete all as specified and as directed.

Supply and fix 20 mm ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball complete all as specified and as directed .

Supply and fix grating doom 100 mm dia of PTMT ( Min weight 25 gms ) complete all as specified and as directed.

Supply and fix Rotational moulded polythene water storage tank 500 ltr capacity ( cylindrical vertical with closed top ) hoisted and fixed in position complete all as specified and as directed .

Supply and fix 50 mm dia High density polyethylene pipes ( HDPE ) of pressure rating 6 Kgf/ Sqcm fixed complete to walls , ceiling or in floors complete all as specified and as directed .

Material and Labour for 75 mm thick plain cement concrete 1:3:6 type C2 ( using 40 mm graded aggregate ) as in plinth protection, laid in bays including filling joints with bitumen gola using 80/25 (1 part of bitumen mixed with 3 parts of sand) finish the surface even and fair complete all as specified and as directed .

Material and labour for hardcore with broken stone or boulders n.exc 63 mm gauge , deposited , spread in layer n.exc 15 cm thick , watering and ramming to a true surface complete all as specified and as directed.

Material and Labour for applying two coats of cement based paint , first quality ,on new wall surface including preperation of new plastered surfaces complete all as specified and as directed .

Material and labour for PCC (1:3:6 ) type C-2 using 40 mm graded stone aggregate as in concrete bed to drain pipe including packing under, and haunching against the sides of pipe after they are laid and tested complete all as specified & directed following 100 mm dia of pipes .

Material and labour for salt glazed stoneware drain pipe 100 mm bore grade 'A' laid in trenches and jointed in cement mortar (1:1) and tested complete all as specified and directed.

Supply and fix UPVC(SWR) pipe 110 mm dia single socketed in any length with rubber ring joint , laid in trenches or in floor complete all as specified and as directed

Supply and fix 110 mm bore PVC (SWR) junction single 'T' equal or unequal complete all as specified and as directed .

Supply and fix 110 mm bore PVC (SWR) bend , any radius complete all as specified and as directed.

Supply and fix 110 mm bore PVC (SWR) Vent Cowl complete all as specified and as directed

Excavating over areas, n exc 1.5 m deep and getting out complete all as specified and as directed

Removing excavated material exe 50m and n exe 250m depositing where directed surplus soil and depositing where directed at level n exe 1.5m above starting point complete all as specified and as directed

Excavation in post holes(or similar holes) in soft/loose soil each n exe 0.50cum,getting out,returning fiiling in and ramming earth or broken rubble mixed with earth around , in layers not exe 25cm, watering and removing surplus soil toa distance n exe 50m and making good surface complete all as specified and as directed

Material and labour MS rolled section as in Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) confirming to Fe-410W(Gde-E-250) Quality A painted one shop coat of zinc chromate primer paint (including preparation of surface) at Contractor’s workshop before fabrication Complete all as specified and as directed

Supply and fix Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.11611979 grade St.-240 painted one shop coat of zinc chromate primer paint (including preparation of surface) at Contractor’s workshop before fabrication complete all as specified and as directed

Supply and fix Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and as directed

Material and labour for cement concrete type C-2 (1:3:6 ) 100mm thick 40mm graded stone aggregate as in floors complete all as specified and as directed

Material and labour for rendering 15mm thick in CM(1:6) on brickwork or concrete surfaces,finished the surfaces,finished the surfaces even and smooth without using extra cement including preparing newly plastered surfaces of walls and applying three coats of white wash complete all as specified and as directed

Supply and fix in Pre-painted galvalume Zinc coating GI based corrugated steel sheet 0.50mm thick(total coated thickness) of any colour having tensile strength of 550Mpa as in roof coverings,fixed with using hot dip galvanised self drilling and self tapping screws complete as specified and as directed. Make of galvalume sheet-M/s spat industries ltd/M/s Tata bluescope &Steel Ltd(colour bond steel) or equivalent in M/s JSW Steel Ltd/M/s Bhusan Power &Steel Ltd. Note: sheet shall be coated with hot dip alloy of 55% aluminium,43.50% Zinc,1.50% diliconand finished with resin coat on both surfaces @ 150gm/Sqm of coating(total both surfaces) s specified and as directed

Supply and fix in Pre-painted galvalume Zinc coating GI based corrugated steel sheet 0.50mm thick(total coated thickness) of any colour having tensile strength of 550Mpa as in ridges,600mm girth,fixed with using hot dip galvanised self drilling and self tapping screws complete as specified and as directed. Make of galvalume sheet-M/s spat industries ltd/M/s Tata bluescope &Steel Ltd(colour bond steel) or equivalent in M/s JSW Steel Ltd/M/s Bhusan Power &Steel Ltd. Note: sheet shall be coated with hot dip alloy of 55% aluminium,43.50% Zinc,1.50% diliconand finished with resin coat on both surfaces @ 150gm/Sqm of coating(total both surfaces) s specified and as directed

Preparation of new steel surfaces of any description not otherwise described over 10cm width or girth and applying two coat synthetic enamel paint ,first quality, over one coat of red oxide primer complete all as specified and directed by Engr-in-charge.

Supply and fix anodized aluminium snap grid frame work (size of grid 605x605mm) for false ceiling including suspenders / hangers 6mm dia GI wire (upto 1200 mm length) adjusting level fixed to roof sheds by means of ceiling cleats made out of GI flat 40x3 mm size 60 mm ling and expansion hold fasteners 12.5 mm dia 40 mm long, complete all as specified and directed.

Supply and fix of 6 mm thick high pressure steam cured non asbestoes fibre cement designer ceiling board of size to suit grid mould (605x605 mm as specified above) and fix in grid mould with necesssary fixing arrangement as per manufacter's instruction complete all as specified and as directed. (Make : Everest/Rhino/Charminar)

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc including Brushing neat cement slurry with 3.0kg of cement per sq. metre complete all as specified and directed.

Material and labour for Cement concrete type B-1, 1:2:4 (20mm graded stone aggregate) n exe 125 mm thickness for floors complete all as specified and directed.

Taking down cement plaster on brick or stone wals, etc. including raking out joints, hacking for keys, scrubbing down with water, etc. complete all as specified and as directed .

Preparation of new plastered surfaces of wall and applying two coats of oil bound distemper, first quality ,over a coat of alkali resistant primer complete all as specified and as directed.

Material and labour for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing including 15mm thick screed bed or bedding layer in CM(1:4) complete all as specified and as directed

M&L Chequered cement concrete tiles 20CM x20CM x 25mm thick over 20mm thick screed bed or bedding layer of mortar in CM (1:6) for laying floor finishes set jointed with grey cement and pointed in neat cement slurry in floors complete all as specified and as directed

Material and labour for two coat of white wash on new wall surface including preparation. complete all as specified and as directed.

Supply only integral water proofing liquid administure for concrete / mortar complete all as specified and as directed

Material and labour for mild steel TMT bars 6 to 8mm bar, cut to length, bent to shape required, including cranking, bending, lapping etc as required and welding with existing bar complete all as specified & directed. (Welding shall be measured and paid separately).

Cutting Chases , pinning in , making good to facing where required and pointing in CM 1:3 to ends or edges of landings , steps , cills , sunshades , shelves , lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good of cutting in brick wall n.exc 10 cm girth complete all as specified and as directed

M&L for 75 mm thick cement concrete 1:2:4 type B2 (using 40 mm graded stone aggregate) as in sub base complete all as specified and as directed

Supply and fix 25 mm bore medium grade galvanized steel tubes with all fittings and fixed to wall and celing or laid in floors etc complete all as specified and as directed.

S&F Rotational moulded polyethylene water storage tanks(trippled layer ) 1000 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed.

M&L 20 mm bore brass ball valves, high pressure, with polyethyelene float and flynut complete, screwed for iron pipe or brass ferrule complete all as specified and as directed Make:- KALPANA / Upadyaya / Veenus / Zoloto / Leader / Audco./ Lakshmi.

Supply and fix 15 mm Gun-metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed

S&F bib taps cast copper alloy chromium plated fancy type with crutch or butterfly handle screwed down screwed down for iron pipe 15 mm bore complete all as specified and as directed

Demolition/Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and as directed

Dismantling of wall and ceiling boards ( fibre , pulp ,insulation etc ) or insulation boards /slabs/blankets , any thickness , including cover fillets complete all as specified & as directed .

M & L for roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc.complete all as specified and as directed

Material and labour for light shade vitrified tiles 10mm thick (square/rectangular) polished, area of each tiles exc 0.18 sqm and nexc 0.38 of each tile in floor set and jointed in neat cement slurry & pointed in white cement and pigment to match the colour of tiles over and including 15mm thick screed bed in cement mortar (1:6) complete as specified and directed.complete all as specified and as directed

Preparation of old treated plastered surfaces of wall and distempering walls with two coats of oil based distemper, first quality, complete all as specified & directed.

Preparation of old treated plastered surfaces of wall and distempering walls with two coats of cement based paint complete all as specified & directed.

Preparation of new treated plastered surfaces of wall and distempering walls with two coats of oil based distemper , first quality, complete all as specified & directed.

Taking down chowkahts of frames with shutters (without taking off shutters from the frame) not exceeding 1.5 sqm each complete all as specified and as directed.

Taking down chowkahts of frames with shutters (without taking off shutters from the frame) exc. 1.5sqm but not exceeding 4 sqm each complete all as specified and as directed.

Supply and fix straight chowkhats and frames,framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, of 2nd class hardwood complete all as specified and as directed.

Preparing surfaces of wood and wood based materials, steel and iron work, new or old, of any description and girth, not otherwise described, and treated with tar or coal tar black paint complete all as specified and as directed

All as per item no 106 but, treating ends of posts, backs of chowkats, etc., area tarred exc 0.1 sq. m but n exc 0.5 sq. m each complete all as specified and as directed

All as per item no 106 but treating small articles such as stop, covers, gully gratings, holdfasts, ends of posts, area n exc 0.1 sq. m each, complete all as specified and as directed

M&L Cutting holes in brick walls in mud mortar for inserting holdfasts for exc half brick but n. exc one brick wall and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required.

Material and labour for PCC (1:2:4) type B-0 (using 12.5 mm graded stone aggregate) for filling concrete in brick wall for fixing holdfasts complete all as specified and as directed.

Supply and fix 35mm thick 2nd class hard wood factory made plain framed panelled door shutters, (two panel) with lock rail and panel of 12mm veneered particle board with commercial veneered on both faces and rail and stiles as per IS 1003(Pt-I), kiln seasoned and chemically pressure treated etc. complete all as specified and as directed.

Material and labour for two coats of synthetic enamel paint , first quality ,over a coat of pink primer on new wooden surfaces over 10 cm width or girth including preparation of new wooden surfaces all as specified and directed.

Supply and fix 150mm size extruded aluminum alloy handle fabricated type anodized (ISI Marked) complete all as specified and as directed.

Supply and fix 150mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

Supply and fix small fittings such as window/doors stoppers brackets of any type, made out of 2nd class hard wood article n.exc. 200cu cm each complete all as specified and as directed. (50mm but hinges shall be paid separately under “supply only” rate).

Supply and fix 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed with rolled or drawn brass bolts and fixed

Supply only 50 mm size butt hinges, medium weight, cold rolled mild steel (ISI marked) complete all as specified and directed.

Providing and fixing factory made uPVG white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose.) Area not exceeding 2.00 sqm each

Supply and fix framed work such as grills, gratings etc. with ends of bars shouldered and /or riveted or forged into spikes, framed guard bars, barred iron door, ladders, framed balusters, walk ways, railings framework of water tank and similar work conforming to Fe 290 G-E-165 complete all as specified and directed.

Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube with EPDM gasket as per specification and drawing complete all as specified and as directed.

Supply and fix factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, as per specification and drawing complete all as specified and as directed.

Supply and fix 100 mm size stainless steel butt hinges, medium weight fixed with cadmium plated screws complete all as specified and as directed.

M & L PCC for 75mm thick cement concrete type D2, 1:4:8,(40mm grade aggregate) as in plinth protection finish even and smooth without using extra cement complete.

M & L PCC for 75mm thick cement concrete type B2, 1:2:4,(40mm grade aggregate) as in plinth protection finish even and smooth without using extra cement complete.

Taking down copper / aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.surfaces, complete all as specified and directed.

Taking down ceiling fan / exhaust fan / wall mounted fan from existing position of high rise shed/ bldg, dismantling blades and removing fan and blades complete all as specified and keep in safe custody/ in office store for refixing the same complete all as specified and directed by Engr-in-charge.

Hanging only ceiling fan and connecting up including provision of cable fromceiling rose or connector to fan complete all as specified and directed.

Hanging only exaust fan and connecting up including provision of cable fromceiling rose or connector to fan complete all as specified and directed.

Material and labour for concealed point wiring (concealed type) with FRLS PVC insulated 1100 volts grade unsheathed single core multi-stranded copper conductors 1.5 sqmm (nominal area) for phase, neutral and 1.5 sqmm FRLS PVC insulated unsheathed multi-stranded copper conductor cable for earth continuty conductor drawn through and including PVC conduit medium grade of suitable size but not less than 20 mm and conduit accessories of adequate size with fittings and accessories as required at site including suitable size of pressed steel sunken terminal box made out of 1.2 mm thick MS sheet duly painted with two coats of synthetic enamel paint of approved colour over a coat of red oxide zinc chrome primer and covered with 3 mm thick insulated hylum sheet cover for fixing of switches switches, sockets, regulator etc and earth continuty conductor shall be connected to common earth complete all as specified as directed for One light point controlled by one switch complete all as specified and directed..

All as per Item No. 129 above but for One ceiling/ exaust / wall mounted fan point controlled by one switch and one regulator complete all as specified and directed.

All as per Item No. 129 above but for One 3/5pin 6 Amp Socket outlet on the independent board complete all as specified and directed.

All as per Item No. 129 above but for One 3/5pin 6 Amp Socket outlet on the same board complete all as specified and directed.

All as per Item No. 129 above but for One call bell point controlled by one switch complete all as specified and directed.

Material and labour for concealed point wiring (concealed type) with FRLS PVC insulated 1100 volts grade unsheathed single core multi-stranded copper conductors 2.5 sqmm (nominal area) for phase, neutral and 2.5 sqmm FRLS PVC insulated unsheathed multi-stranded copper conductor cable for earth continuty conductor drawn through and including PVC conduit medium grade of suitable size but not less than 20 mm and conduit accessories of adequate size with fittings and accessories as required at site including suitable size of pressed steel sunken terminal box made out of 1.2 mm thick MS sheet duly painted with two coats of synthetic enamel paint of approved colour over a coat of red oxide zinc chrome primer and covered with 3 mm thick insulated hylum sheet cover for fixing of 16 A switches, sockets, etc and earth continuty conductor shall be connected to common earth complete all as specified as directed. Note :(i) Cost of cutting of wall, if any, for housing of GI box, ceiling rose, etc and also making good the disturbed surfaces are deemed to be included in unit rate. (ii) Cost of GI box of suitable size shall be deemed to be included in the qouted rate. (iii): Cost of chase cutting if any for wiring shall be deemed to be included in the quoted rate). Note for item Nos. 129 to 134 (i) Cost of cutting of wall, if any, for housing of GI box,ceiling rose, etc and also making good the disturbed surfaces are deemed to be included in unit rate. (ii) Cost of GI box of suitable size shall be deemed to be included in the qouted rate. (iii) Cost of chase cutting for wiring shall be measured and paid separately. Make for item Nos. 129 to 134:- Make for cable:- Polycab / Finolex / Havells / / KEI / HPL / Plaza / Standard / RR Kabel. Make for conduit:-Plaza / Presto Plast / Precision/ M/S AGK Industries

Supply and fix switch piano flush buttom 5 Amp single pole one way 240 volt complete all as specified as directed

Supply and fix socket out let 3/5 pin 5 Amp 240 volt.complete all as specified as directed

Supply and fix switch socket combination 3/5 pin 5 Amp 240 volt.complete all as specified as directed

Supply and fix switch socket combination 3/6 pin 15 Amp flush type 240 volt.complete all as specified as directed

Supply and fix celling fan regulator (step regulator) switch type AC 230 volt suitable for ceilling fan any sweep all as specified and directed

Supply and fix bell push 6 amps complete all as specified as directed

Matetial and labour for call bell ding dong type AC 230 volt single pole complete all as specified as directed

Matetial and labour for lamp holder PVC/Polycarbonate type with backplate suitable for battel fittings complete all as specified as directed

Supply and fix celling rose surface,3 terminal of min da 63.5mm and ISI marked all as specified and directed

Supply and fix box type luminiare, pre coated in white and pre-wired for single LED tube light 4 ft capacity suitable for single T8 LED tube rod 4ft 20 watt complete with LED tube rod T8, 20 W, 4ft long with extruded aluminium body, PC diffuser and inbuilt driver, holder, prewired fitted on two Nos 2nd class hard wood round block and connecting up with three core twisted flexible copper conductor cable of suitable size from ceiling rose to connector of tube light fitting including taking down old unserviceable fitting any type complete all as specified and as directed. Make of T/L fitting - Century LED Ltd Cat Part No. - KCCF02000863 / Philips Cat Part No. - TMC 501 P 1xT-LED 22W P3241 / Wipro Cat Part No. - WIO921208 Make of LED T/L Rod - Century LED Ltd Cat Part No. - TWPP020C / Philips Cat Part No. - MAS LEDtube 1200mm 18W865 T8 I / Wipro Cat Part No. - LL13-181-65SE

Supply and fix LED light fitting (cealing) recessed/ surface mounted 600mm x 600mm 36 watt LED provided with high transmission crylic cover polycarbonate diffuser modular to be fitted on POP/ Gypsum cealing lampwhite powder coated CRCA housing luminare including necessary electric connection with three core twisted flexible copper cable of suitable size from ceiling rose to connector of of light fitting complete including taking down unsv light fitting all as specified and directed. Make : Century LED Ltd Cat Part No. PCRA036C2033 or equivalent in Wipro/ Philips

Supply and fixing LED batten mirror light 10 Watt extruded aluminium body, PC diffuser and inbuilt driver, prewired with electronic driver and diffuser and all accessories fitted on including two Nos 2nd class hard wood round block to be fitted on wall / ceiling including connecting up with three core twisted flexible copper conductor cable of suitable size including taking down the old light fitting any type complete all as specified and as directed. Make : Century LED Ltd Cat Part No. BWMP010C2136 or equivalent in Wipro/ Philips

Matetial and labour for sub-main wiring in repairs with two run of FRLS PVC insulated unshethed single core multi-stranded copper conductor of size 6 sqmm and one run of 6 sqmm copper conductor as continuity earth wire drawn in and including PVC conduit of suitable size but not less than 20mm dia on shed/ wall / iron channel etc, including PVC fittings such as bends Tee and boxes including taking down old unserviceable sub main wiring of any size in steel/ PVC rigid conduit complete all as specified and directed (Note : (i) Two run of 6 sqmm cable one run of 6 sqmm cable alongwith PVC conduit shall be measured and paid as one unit. (ii) Cost of cutting of wall/ fixing material such as GI wire of suitable size / any item, if any, required for housing of PVC casing conduit etc and also making good the disturbed surfaces are deemed to be included in unit rate. (iii) Cost of chase cutting if any for submain wiring shall be deemed to be included in the quoted rate).

Matetial and labour for sub-main wiring in repairs with two run of FRLS PVC insulated unshethed single core multi-stranded copper conductor of size 4 sqmm and one run of 4 sqmm copper conductor as continuity earth wire drawn in and including PVC conduit of suitable size but not less than 25 mm dia on shed/ wall / iron channel etc, including PVC fittings such as bends Tee and boxes including taking down old unserviceable sub main wiring of any size in steel/ PVC rigid conduit complete all as specified and directed (Note : (i) Two run of 4 sqmm cable one run of 4 sqmm cable alongwith PVC conduit shall be measured and paid as one unit. (ii) Cost of cutting of wall/ fixing material such as GI wire of suitable size / any item, if any, required for housing of PVC casing conduit etc and also making good the disturbed surfaces are deemed to be included in unit rate. (iii) Cost of chase cutting if any for submain wiring shall be deemed to be included in the quoted rate).

Supplying, laying, commissioning and testing XLPE insulated PVC sheathed armoured heavy duty electric cable of size 16 Sqmm 4 core with aluminium conductor for working voltage upto and including 1100 volts, ISI marked to be laid on wall, fixed to pole, wall/roof with suitable size of clamp/ GI wire complete with cable end, lugs including required size of aluminium thimble for making connection including taking down old unserviceable cable of any type and size completed all as specified and directed.

Supplying, laying, commissioning and testing XLPE insulated PVC sheathed armoured heavy duty electric cable of size 25 Sqmm 3.5 core with aluminium conductor for working voltage upto and including 1100 volts, ISI marked to be laid on wall, fixed to pole, wall/roof with suitable size of clamp/ GI wire complete with cable end, lugs including required size of aluminium thimble for making connection including taking down old unserviceable cable of any type and size completed all as specified and directed.

Supply and fixing TPN DB 4 way double door horizontal type suitable for four pole MCB TPN as incomer including make good of damaged surface/wall including re-connection with existing earth wire to DB incuding taking out the old unserviceable one complete all as specified and as directed.Note:- MCB shall be measured and paid seperatly. Make: C&S /Indoasian/ Havells

Supply and fix powder coated sheet steel enclosure fitted with busbar, DIN channel, neutral link & earth link superline SPN DB (Double door) 8 way, including taking down the old unserviceable DB complete all as specified as directed. Make: C&S /Indoasian/ Havells

Supply and fix powder coated sheet steel enclosure fitted with busbar, DIN channel, neutral link & earth link superline SPN DB (Double door) 4 way, including taking down the old unserviceable DB complete all as specified as directed. Make: C&S /Indoasian/ Havells

Supply and fix MCB TPN 63 amps, 240 volts, 'C' series with all incoming / outgoing connections with proper size of lugs complete all as specified as directed. Make: C&S /Indoasian/ Havells

Supply and fix MCB single pole & neutral 40 Amps, 240 volts, 'C' series with all incoming / outgoing connections with proper size of lugs complete all as specified as directed. Make: C&S /Indoasian/ Havells

Supply and fix MCB single pole & neutral 32 amps, 240 volts, 'C' series with all incoming / outgoing connections with proper size of lugs complete all as specified as directed. Make: C&S /Indoasian/ Havells

Supply and fix MCB single pole 6 to 32 amps, 240 volts, 10 KA, 'C' series with all incoming / outgoing connections with proper size of aluminium lugs complete all as specified as directed. Make: C&S /Indoasian/ Havells

Supply and fix Blanking plate for MCB DB complete all as specified as directed

Materials and labour for earthing complete with galvanized earth plate electrode 600 x 600 x 6.0 mm thick, buried directly in ground (earth pit not less than 2.25 m deep below normal ground level ) with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanized iron earth lead wire 4.0 mm dia length upto 7.5 mtr by means of bolts, nuts, check nuts and washers of galvanized iron or steel, earth lead wire protected by and including 15mm dia GI pipe (light grade) not exc 7.5 mtr, alternate layers of charcoal and salt, including 20 mm bore GI tubing for watering to earth electrode, earth lead connected to test point/ distribution panel /feeder pillar etc as directed including necessary earth work, concrete pit with PCC (1:3:6) type C1, pre cast RCC(1:1:5:3) type A1 cover slab duly reinforced with 8 mm dia TMT bar 150mm c/c both way and two numbers lifting handle made of TMT bar and set in cement mortar (1:4), funnel, wire mesh, all as shown in electrical plate No 3 of SSR part-1 and testing on completion including taking out old earthing complete all as specified and directed.

S&F Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4mm dia galvanised iron or steel wire including taking out old wire complete all as specified and directed.

S&F GI pipe 15 mm bore 'light grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors including taking out old pipe complete all as specified and directed.

Supply and fix sheet steel enclosure fitted with plug & socket metal clad AC box with MCB SP 20A including insulated neutral link, adjustable DIN rail channel and connecting links complete after taking down the old socket board and connection complete all as specified as directed. Make: C&S /Indoasian/ Havells

Supplying, laying, commissioning and testing XLPE insulated PVC sheathed armoured heavy duty electric cable of size 16 Sqmm 2 core with aluminium conductor for working voltage upto and including 1100 volts, ISI marked to be laid on wall, fixed to pole, wall/roof with suitable size of clamp/ GI wire complete with cable end, lugs including required size of aluminium thimble for making connection including taking down old unserviceable cable of any type and size completed all as specified and directed by Engr-in-Charge.

Supply and fix LED bulk head light fitting 10/12 Watt IP 65 protection with inbuilt driver prewired to be fixed on wall/ ceiling complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed. Make - Century LED Ltd Cat Part No. HWAR012C0168 or equivalent in Wipro/ Philips

Supply , fixing , testing and commissioning of exhaust fans metal body AC single phase 230/ 240 V of size 300 mm sweep heavy duty with blades, frame and louver complete with all accesories suitable for single phase 230 Volts AC supply with necessary electrical connection with three core flexible cable of suitable size and fixing arrangement such as suitable size of fastener, nut bolts and washer and making hole on wall for fixing arrangement complete all as specified as directed. Make :Havells / Bajaj /Philips/ Crompton

Supply and fix LED STREET light 45 Watt die cast aluminium housing with IP-65 protection and surface mounting device LED 45 Watt with lens with inbuilt driver prewired and SPD 5 KV building security luminaire including all fixing arrangement required to fixed on pole/ wall with suitable size of GI bracket including suitable size of fixing items such as clamps, nut bolts and washer of suitable size and connecting with existing electric supply with three run single core 1.5 sqmm copper conductor cable with flexible PVC conduit and making connections complete all as specified as directed Make - Century LED Ltd Cat part No. - SPSP045C / Philips Cat part No. - BRP 409 LED 040 CW HO MR FG S1PL PSU GR / Wipro Cat part No. - LR02-501-XXX-57-XX

Supplying, laying, commissioning and testing XLPE insulated PVC sheathed armoured heavy duty electric cable of size 10 Sqmm 2 core with aluminium conductor for working voltage upto and including 1100 volts, ISI marked to be laid on wall, fixed to pole, wall/roof with suitable size of clamp/ GI wire complete with cable end, lugs including required size of aluminium thimble for making connection complete all as specified as directed

Supply and fix powder coated sheet steel enclosure fitted with busbar, DIN channel, neutral link & earth link superline SPN DB (Double door) 4 way complete all as specified as directed.

Materials and labour for earthing complete with galvanized earth plate electrode 600 x 600 x 6.0 mm thick, buried directly in ground (earth pit not less than 2.25 m deep below normal ground level ) with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanized iron earth lead wire 4.0 mm dia length upto 7.5 mtr by means of bolts, nuts, check nuts and washers of galvanized iron or steel, earth lead wire protected by and including 15mm dia GI pipe (light grade) not exc 7.5 mtr, alternate layers of charcoal and salt, including 20 mm bore GI tubing for watering to earth electrode, earth lead connected to test point/ distribution panel /feeder pillar etc as directed including necessary earth work, concrete pit with PCC (1:3:6) type C1, pre cast RCC(1:1:5:3) type A1 cover slab duly reinforced with 8 mm dia TMT bar 150mm c/c both way and two numbers lifting handle made of TMT bar and set in cement mortar (1:4), funnel, wire mesh, all as shown in electrical plate No 3 of SSR part-1 and testing on completion complete all as specified and directed.

S&F Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4mm dia galvanised iron or steel wire complete all as specified and directed.

S&F GI pipe 15 mm bore 'light grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S.P. SINGHA

SREE GURU CONSTRUCTION CO