GE 861 EWS-53/2023-24

Amount

Taking down carefully aluminium/copper point wiring (light fan socket or power) complete with fitting such as switches, tube lights, ceiling rose, pendants, regulators, MCB DB, MCB'S, Main switch from control board and making good disturbed surfaces of walls, floor to match with existing and keeping items aside in safe custody for reuse/credit such as regulators, light fitting, MCBs complete all as specified and directed.

Point wiring for one light point/fan point controlled by one switch with 1.5 sqmm PVC FRLS insulated unsheathed copper conductor single core multi strand flexible cable and 1.5 sqmm PVC FRLS insulated unsheathed copper conductor single core cable (green colour) as earth lead in and including PVC casing and capping/conduit medium grade of suitable size run on wall/surface/concealed with all fittings (ISI Marked) controlled by one switch including CI/MS/ wooden sunk box of required size, & as directed by Engr in Charge & 3mm thick plastic laminated sheet, including cutting chases to wall making good the disturbed surfaces to match with the existing specification complete all as specified and directed.

All as per srl item No-2 here in before but for One 3 pin socket outlet, 5 Amps on the same board with other switches, with cables 1.5 sqmm size complete all as specified and directed.

All as per srl item No-2 here in before but for One 3 pin socket outlet, 5 Amps, independent board, with cables 1.5 sqmm size complete all as specified and directed.

All as per srl item No-2 here in before but for One 3 pin socket outlet, 15 Amps on independent board, with cables 4 sqmm size complete all as specified and directed.

S & F Modular Switch one way 6 A, 1 module complete all as per specified and directed.

S & F Modular Switch one way 16 A, 1 module complete all as per specified and directed.

S & F Modular Socket,6A - 2/3 pin combined 2 module complete all as per specified and directed.

S & F Modular Socket, 6A/16A - 2/3 pin combined 2 module complete all as specified and directed.

Supply and Fixing in repairs Fan regulator step type, 120W - 2 module type electronic fan regulator, duly ISI marked with and including connector complete all as specified & directed.

S & F in repair Modular white cover plate with frame, 3 module complete all as per specified and directed.

S & F in repair Modular white cover plate with frame, 4 module complete all as per specified and directed.

S & F in repair Modular white cover plate with frame, 6 module complete all as per specified and directed.

S & F in repair Modular white cover plate with frame, 8 module complete all as per specified and directed.

Supply & fixing of ceiling rose, 3 phase/PVC/polycarbonate isolated body complete all as specified and directed.

Supply & fixing lamp holder (Angular / Straight), insulated body, with back plate for batten fitting complete all as specified and directed.

Supply and fixing LED lamp 9 W complete all as specified and directed.

Supply and fixing round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light fitting complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F decorative ultra slim linear LED 20 Watt 4' long lighting fixture with extruded al heat sink, environment friendly, energy efficient ready to use pack including LED tube complete with inbuilt electronic driver, PCB, connector block etc. including connecting up three copper flexible cable from ceiling rose to fittings including connecting up and fixed on including two nos PVC square box of required size complete all as specified & directed.

S&F LED in repairs Bldg security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all specified and directed.

S&F in repairs sheet metal enclosure Vertical type, Triple pole and neutral, AC, 415 volts, 4 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces complete all as specified and directed.

Supply and fixing in repairs sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 8 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces complete all as specified and directed.

S&F in MCCB 4 Pole 63Amps, AC 415 V, 25KA complete all as specified and directed.

Supply and fixing MCB, SP, AC, 240 volts "B" series capacity of 06 to 32 Amps, 10KA and making connections complete all as specified & directed.

Supply & fixing MCB, SPN (single pole neutral), AC, 240 volts, B series capacity 32 Amps 10KA and making connections complete all as specified & directed.

M & L for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick burried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No.3 of SSR part I connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 150mm center to center both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1 , Angle iron 40x40x5mm frame for pit cover including testing on completion complete all as specified and directed.

S & F in repairs exhaust fan 300 mm sweep PVC body with louver, 240 volts AC single phase, 50 Hz, ISI marked, including necessary work in wall/sheet, including connection cable, nut bolt and other fixing material complete all as specified and directed.

S & F in repairs ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

S & F in repairs electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specified and directed.

M & L in replacement for sub main wiring with two single core PVC insulated FRLS cable with Copper conductor unsheathed cable of size 2 x 6 sqmm drawn through in and including PVC Concealed with 1 x 6 sqmm PVC insulated copper conductor single core for continuous earthing complete including PVC casing capping 25 mm size ( Note : Two run of single core PVC insulated cable with Copper conductor unsheathed cable of size 6.0 Sqmm and one run of 6.0 Sqmm PVC insulated copper conductor single core,one run of PVC casing capping shall be measured as single run) complete all as specified and directed.

Supply and laying in replacement cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cables (Heavy duty) 1100 volts grade with stranded aluminium conductor of size 35 Sqmm 3.5 core complete all as specified and directed.

Supply and laying in replacement cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cables (Heavy duty) 1100 volts grade with stranded aluminium conductor of size 10 Sqmm 2.0 core.

Excavation in trenches not exceeding 1.5 m wide and n.exc. 1.5 m deep for foundation of poles/stay/cable etc including getting out in loose/soft soil complete all as specified and directed.

Sand cushioning to cable with dry fine sand in trenches 8 cm below the cable and 15 cm above the cable after laying complete all as specified. Note : Punned thickness 18 cm will be measured and paid.

Bricks laid in trenches flat with width equal to length of brick for cable protection well burnt sub class 'B' laid across the cable complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm complete all as specified and directed.

Removing excavated material n.exc. 50m and depositing where directed at a level n.exc. 1.5 m above the starting point complete all as specified and directed.

Supply, laying, jointing in replacement and testing in trenches, galvanized iron water tubing medium grade (ISI marked) including provision of all necessary steel fittings/ accessories complete all as specified and directed for the size 50 mm bore complete all as specified and directed.

Supply and fixing in replacement LED flood light fitting 70 watt 230 V AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics with IP-65/66 protection complete all as specified and directed.

Supplying and fixing in repairs 1100 volts grade heavy duty cable insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers nor more than 1 mtr apart including 4mm dia GI suspension wire, one twin core cable flat or circular 10 Sqmm complete all as specified and directed.

Supply and laying in repairs 2.5 Sqmm cable with copper conductor PVC round sheathed (flexible) industrial cable twin core complete all as specified and directed.

Supply and fixing in repairs MCCB 100 Amps rupturing capacity 16 KA 4 pole 415 volts fixed type complete all as specified and directed.

Supply and fixing in repairs connecting and testing change over switch 4 pole 415 volts on load of rating 100 Amps and including sheet enclosures complete all as specified and directed.

M/S GASSI CONSTRUCTION AND CO

M/S AKMAL CONSTRUCTIONS

M/S MIR SAJAD ENTERPRISES

M/S RATHER STEEL WORKS

osho traders

M/s M Ashraf and Brothers