Karnataka

Active

Works

Buildings

Construction Of Integrated Science Lab At GMPS MODEL HPS and High School RMSA Amruthahalli North-4 in Bangalore North Taluk, Bangalore Urban District. Under PMSHRI/2025-26

Rural Development and Panchayat Raj Department

RDPR Division Office Bengaluru Urban | Bengaluru Urban, Karnataka

Amount: Refer DocsCloses: 15 Sept 20264d left

Timeline

Published31 Aug 2026
Closes15 Sept 2026

Tender Value

Refer Docs

EMD Value

₹44,250

Closing Date

15 Sept 2026, 4:00 pm4d left

Tender Inviting Authority

Office Inviting Bids

Rural Development and Panchayat Raj Department

Contact Person

RAJU C S

Office Number

Work Description

Construction Of Integrated Science Lab At GMPS MODEL HPS and High School RMSA Amruthahalli North-4 in Bangalore North Taluk, Bangalore Urban District. Under PMSHRI/2025-26

Tender Information

Tender ID

RDPR/2026-27/BD/WORK_INDENT28952

Reference Number

RDPR/2026-27/BD/WORK_INDENT28952

Tender Type

Open

Product Category

Buildings

Form of Contract

Electronic Documents, First(One Cover)

Location

RDPR Division Office Bengaluru Urban

Source Website

Subscribe to view

Documents Required

4 documents required · 4 mandatory

Technical Bid

RequiredAnnual Turnover Certificate - CA with UDIN No. last five years period. 2021-22 to 2025-26

RequiredPWD Registration Certificate- Class III and above

RequiredBid Capacity

RequiredBalance sheets , profit & loss statement certified by an Registered chartered accountant if not uploaded tender is rejected

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Submission of insufficient documents required for Qualification of tender document as per K.W.1 of SBD will be technically dis-qualified.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

PWD Department Registration Details

If the tenderers who have been failed to complete the work within the stipulated period in this Division pertaining to already entrusted works such tenderers will not entertained

List of existing commitments and ongoing work

List of works for which tenders already submitted

the tender bidders should furnish EMD as stipulated in tender Notification as furnished in Standard tender Bid Document K.W.1

the available tender capacity will be calculated as stipulated in Sec-3 of KW-1 Corrigendums.

Even though the tenderers meet the above criteria they are subject to be disqualified if they have made any misleading or false representations in the forms statements and attachments submitted in proof of the qualification requirements and or records of poor performance such as abandoning the works not properly completing the contract, inordinate delays in completion, litigation history or financial failures etc and or participated in the previous tender for the same work and had quoted unreasonably high tender prices and could not furnish rational justification

Labour cess will be deducted at 1% from Each Bill of the executed items from the Successful tenderers.

the tenderer shall furnish all requisite details as per Standard Bid tender Document . they must carefully read all the tender conditions as stipulated in I.F.t and K.W.1 and relevant document shall be furnished. Otherwise tenders will be rejected.

Corrigendum pertaining to tender are applicable as per Government Circulars.

Successful tenderer has to make their own arrangement for procurement of all materials and machineries required for the work.

the tenderer should complete the work within the stipulated period, otherwise Security Deposit amount will be forfeited .Action will be taken for black listing of such contractors.

the Photos and Video graphs should be taken before commencement, during execution and after completion of the work in presence of nodal officers

the tenderers who meets all tender conditions stipulated inK.W.1 are only eligible

the undersigned reserves the Right to accept / reject any/ all tenders without assigning any reason.

the defect liability period on contractor is one year from the date of completion of the work.

Conditional tenders will be rejected.

the work shall be implemented within the grants allotted by the Government.

Contractor has to make their own arrangements for procurement of all materials and machineries required for the work. there is no departmental supply of materials. Contractor should procure materials and as defined in specifications prescribed in ISI and submit necessary quality control certificates from the authorized agencies before execution.

Within 20 days of receipt of the letter of acceptance, the Successful tenderer shall deliver to the employer a security deposit in any of the forms given below for an amount equivalent to 5% of contract price plus additional security for un balanced tenders. Bankers cheque /DD/pay order in favour of EE Panchayath Raj Engineering Division, Bangalore Urban District, Bangalore/Specified small savings instrument pledged to EE Panchayath Raj Engineering Division, Bangalore Urban District, Bangalore otherwise the E.M.D. will be forfeited and necessary action will be initiated against the tenderer as per tender Clause

the Furnished E.M.D. will be released only after successfully execution of the tender Agreement by the successful tenderer or 30 days from the date of submission of tender whichever is earlier.

Each item rates are Exclusive of GST 18%. bidder should quote the rates exclusive of GST for each item.

Fee & Financial Details

Tender Fee Amount

₹500

EMD Fee Amount

₹44,250

Important Dates

Last Activity

4 Sept 2026

Published

31 Aug 2026

Download Ends

11 Sept 2026

BOQ Preview

•

Construction Of Integrated Science Lab At GMPS MODEL HPS and High School RMSA Amruthahalli North-4 in Bangalore North Taluk, Bangalore Urban District. Under PMSHRI/2025-26

•

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

•

KSRB 5-14: Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conform...

•

Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3

•

fine sand) on concrete surface / ceilings including rounding off corners

•

wherever required smooth rendering, providing and removing s...

•

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and remov...

•

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mor...

•

Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including

•

making plaster groves (excluding cost of cement concrete and sid...

•

Providing and fixing in position fully panelled Honne wood shutters for

•

doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm

•

wide top rail and stiles 100mm wide as per drawing a...

•

Providing & fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC (Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastom...

•

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...

•

Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings ...

•

Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed ti...

•

Demolishing cement concrete manually/ by mechanical means including disposal of material to the appropriate disposal area as per direction of Engineer-in-charge. --with all lead, lift, loading, unloa...

•

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

•

Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, lai...

•

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

•

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after th...

•

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer to give an even shade after thoroughly brooming the surface to remov...

•

Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, ...

•

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paintof appro...

•

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...

•

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 --with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incid...

•

Providing and fixing chlorinated Polyvinyl chloride (CPVC) pipes , having thermal stability for hot & cold water supply , including all CPVC plain & brass threaded fittings , including fixing the pip...

•

Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

•

Supplying and wiring adopting loop system in existing PVC Conduit/casing capping using2x1.5Sqmm (Phase& Neut ral) & 1x1.0 sqmm (Earth wire) FRLS multistrand PVC insulat ed copper wire(confirming toIS-...

•

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary support ing back plate with required nos. of machine screws, bolts nuts etc., complete on the existing ...

•

Supplying 6A flush/projected type socket and 6 amps flush/projected type SP switch either surface/flush moun ting in a existing gang box or in a 4mm thick plastic sheet and fixing over a flush mounted...

•

Supplying and flush mounting powder coated metal box suitable for mounting modular switch plates.The box should be firmly flush mounted after due groove cutting in Brick/ Stone/C.C wall 16 - 18 Way -...

•

Supplying 4mm thick plastic sheet with necessary nitches for fixing switches regulators etc., and fixing on existing wooden or metal box using N.F. screws. --with all lead, lift, loading, unloading, ...

•

Supplying heavy gauge PVC conduit pipe 20mm dia con firming to IS 2509 with suitable size bends,junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of RCC ceiling and RCC...

•

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C'Type curve,indicator ON/OFF, energy cross-3 with Short circuit breaking cap...

•

Wiring for lighting / power circute using one of PVC insula ted 1100v/grade multies and copper conductor single core cable in open or consealed system of wiri ng A Group materials 2.50Sqmm materials. ...

•

Supplying and fixing PVC/metal conduit deepjunction box. .32mm deep junction box --with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incide...

•

Supplying of .....feet -PVC Batten with integrated LED tube ....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V@ 50/60Hz & Pow...

•

Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated wire...

•

Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball be...

•

Fixing a ceiling /wall mounting fan of all capacities and all types, with necessary clA and 'S' hook made out of 15mm dia MS rod, with 5 A. ceiling rose of approved quality with necessary length of 23...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

KPPP-kw-1-28952-OTHERS.docx

Tender Document • 1.85 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .