Construction of First floor building to the Night Shelter opposite to Maternity Hospital Karaikal

Amount

Code No.15.3 Demolishing R.C.C. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead.

Code No.5.2.2 Reinforced cement concrete work in walls (any thickness), including attached pilasters , buttresses, plinth and string courses , fillets, columns , pillars, piers, abutments, posts and struts etc.upto floor five level excluding cost of centering, shuttering,finishing and reinforcement:1:1.5:3 (1 cement : 1.5coarse sand : 3 graded stone aggregate 20mm nominal size)

Code No.5.3 Reinforced cement concrete work in beams , suspended floors, roofs having slope upto 15 degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centering, shuttering,finishing and reinforcement with 1:2.4 (1 cement :1.2 coarse sand : 4 graded stone aggregate 20mm nominal size).

Code No.5.9.6 Centring and shuttering including strutting, propping etc. and removal of form for: columns, pillars, piers, abutments,posts and struts.-

Code No.5.9.3 Centring and shuttering including strutting, propping etc. and removal of form for : suspended floors, roofs, landings , balconies and access platform.

Code No.5.9.5 Centring and shuttering including strutting, propping etc. and removal of form for: lintels, beams, plinth beams, girders, bressumers and cantilevers.

Code No.5.22.6 Steel Reinforcement for R.C.C work including straightening, cutting , bending, placing in position and binding all complete - Thermo - Mechanically treated bars (TISCON / VIZAG /IISCO /SAIL / JSW) Fe -415 or more.

Code No.6.4.2 Addendem Brick work with common burnt clay FPS (non modular) bricks of class designation 3.5 in superstructure above plinth level upto floor V level in all shapes and sizes in cement mortar 1:6 (1 cement : 6 coarse sand)

Code No.6.13.2 Addendem Half brick masonry with common burnt clay FPS (non modular) bricks of class designation 3.5 in superstructure above plinth level upto floor V level in cement mortar 1:4 (1 cement: 4 coarse sand)

Code No.9.1.2V Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners shall be paid for separately - Vengai wood

Code No.9.5.1.1V Providing and fixing panelled or panelled and glazed shutters for doors , windows and clerestory windows including ISI marked black enamelled M.S pressed butt hinges with necessary screws excluding panelling which will be paid for separately, all complete - Vengai wood - 35mm thick shutters.

Code No.9.7.1V Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves orebates to be measured). Panelling for panelled or panelled and glazed shutters 25mm to 40mm thick: Vengai wood.

Code No. 9.53 Providing 40x5 mm flat iron hold fast 40cm long including fixing to frame with 10mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size)

Code No.21.1.2.2 Providing and fixing aluminimum work for door windows, ventilators and partitions with extruded built up standard tubular sections / appropriate Z sections and other sections of approved make conforming to IS : 733 and IS : 1285,fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e at top, bottom and sides with required EPDM rubber/ neoprene felt etc. Aluminimum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminimum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings. (Glazing and panelling to be paid for separately) : For shutters of doors, windows and ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EDPM rubber / neoprene gasket required (fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron)

Code No.21.3.2 Providing and fixing glazing in aluminimum door, window, ventilator shutters and partitions etc., with EDPM rubber / neoprene gasket etc., complete as per the architectural drawings. (cost of aluminimum snap beading shall be paid in basic item) : With float glass panes of 5mm thickness.

Code No.9.48.2 Providing and fixing M.S.grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc .including priming coat with approved steel primer all complte - fixed to openings / wooden frames with rawl plugs screws etc.

Code No.4.1.10 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering.- All work upto plinth level -1:5:10 (1 cement:5coarse sand : 10 graded stone aggregate 40mm nominal size)

Code No.2.27 Supplying and filling in plinth with sand under floors including, watering, ramming consolidating and dressing complete.

Code No.13.16.1 6mm cement plaster of mix 1:3 (1 cement : 3 fine sand).

Code No.13.1.1 12mm cement plaster of mix :Cement mortar 1:4 (1 cement : 4 fine sand)

Code No.17.13.2 Providing and fixing white vitreous china water closet squatting pan (Indian type) Orissa pattern WC pan of size 580 x 440 mm.

Code No.17.2.1 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever), conforming to IS: 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required. W.C pan with ISI marked white solid plastic seat and lid.

Code No.17.25.2 Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings flat back wash basin of size 550 x 400mm

Code No.17.32.1 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6mm thick hard board backing circular shape 450mm dia.

Code No 12.41.2 Providing and fixing on wall face unplasticised rigid PVC rain water pipes conforming to IS : 13592 type A including jointing with seal ring conforming to IS :5382 leaving 10mm gap for thermal expansion, (i) single socketed pipes. 110mm diameter.

Code No.19.33.1D Providing and fixing on wall face /column face unplasticised - PVC moulded fittings/accessories for unplasticisd - PVC soil and waste pipes conforming to IS:14735-1999 including jointing with seal ring onforming to IS : 5382 leaving 10mm gap for thermal expansion - bend with door 110mm

Code No.12.42.3.2 Providing and fixing on wall face unplasticised- PVC moulded fittings /accessories for unplasticised rigid PVC rain water pipes conforming to IS : 13592 type A including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for thermal expansion. Single Tee with door 110X110X110mm.

Code No.12.42.6.2 Providing and fixing on wall face unplasticised- PVC moulded fittings / accessories for unplasticised rigid PVC rain water pipes conforming to IS : 13592 type A including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for thermal expansion. Shoe (plain)110mm shoe.

Code No.12.43.2 Providing and fixing unplasticised - PVC pipe clips of approved design to unplasticised PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4(1 cement : 4 coarse sand) and making good the wall etc. complete. 110mm

Code No.9.70.1 Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc.complete: - 125x64x1.90mm

Code No.9.96.1 Providing and fixing aluminium sliding door bolts, ISI marked, anodised (anodic coating not less than grade not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with nuts and screws etc.complete:- 300x16mm

Code No.9.97.2 Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc.complete :-250x10mm

Code No.9.100.1 Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc.complete :-125mm

Code No.11.41.2A Providing and laying fully vitrified floor tiles of size 600x600mm (thicknes to be specified by the manufacturer) with water absorption's less than 0.08% and conforming to IS: 15622 of approved make (Nitco / Rak / Johnson / Asian) in all colors and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600mm.

Code No.11.38.1 Providing and laying ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of first quality conforming to IS: 15622 of approved make (Nitco / Kajaria) in all colors, shades, except white, ivory, grey, fume red brown laid on 20mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigments etc., complete.

Code No.11.36A Providing and fixing 1st quallity ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacture of approved make (Jhonson / Asian / Somany / Nitco) in all colours, shades of size 200 x 300 mm as approved in skirting, risers of steps and dados over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm. Including pointing in white cement mixed with pigment of matching shade complete. size 200x300mm.

Code No.18.7.4 Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fitting with one step CPVC solvent cement and testing of joints complete. (Internal work exposed on wall) - 32mm nominal outer dia pipes

Code No.18.7.3 Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fitting with one step CPVC solvent cement and testing of joints complete. (Internal work exposed on wall) - 25mm nominal outer dia pipes

Code No.18.15.1 Providing and fixing brass bib cock of approved quality - 15 mm nominal bore.

Code No.18.17.1 Providing and fixing gun metal gate valve with CI wheel of approved quality (screwed end) - 25 mm nominal bore.

Code No.18.18.3 Providing and fixing ball valve (brass) of approved quality complete. high or low pressure with plastic floats - 25 mm nominal bore.

Code No.18.48B Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI: 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet outlet and overflow pipes but without fittings and the base support for tank Rectangular tank.

Code No.16.95 Supplying fixing and commisioning of Suguna/ Texmo /Sharp 1 HP monoblock pumpset slow speed single phase motor. The rate include the cost of pumpset, pumpset fixing in positionand test run etc. complete as directed by the Engineer- in -charge.

Code No.12.20L Lime concrete terracing on roofs of required thickness laid to fall with 25mm nominal size brick aggregate and 50% lime mortar 1:2 (1 lime putty : 2 surkhi) rammed and finished with gur and belgiri treatment complete including rounding of junctions with parapet wall complete.

Code No.12.15.1 Painting top of roofs with bitumen of approved quality at 17kg per 10sqm impregnated with a coat of coarse sand at 60 cudm per 10 sqm including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete: With residual type petroleum bitumen of grade VG-10

Code No.12.20 Providing and laying pressed clay tiles (as per approved pattern 18mm nominal thickness and of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% intergral water proofing compound laid over a bed of 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) and finished neat complete.

Code No.13.43.1 Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface - water thinnable Cement primer

Code No.13.60.1B Wall painting with plastic emulsion paint-Premium of approved brand and manufacture to give an even shade - two or more coats on new work

Code No.13.61.1 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade - Two or more coats on new work.

Code No 14.54.1 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade - One or more coats on old work.

Code No.1.1.1.2 Supplying and fiixng of following size of PVC conduit alongwith the accessories in surface / recess conduct including cutting the wall and making good the same in case of recessed conduit as required. Make : Avonplast / Vijaya : - 25 mm dia

Code No.1.1.3.4.4 Supplying and fixing of following size of PVC deep junction box in required position along the line of PVC conduit as required .Make:Avonplast/Vijaya:- 25mm deep Junction Box four way

Code No.1.1.3.2.3 Supplying and fixing of following size of PVC junction box in required position along the line of PVC conduit as required. Make:Avonplast/Vijaya:- 25mm Junction Box three way

Code No.1.7.2.1 Supplying and fiixng 3 plate, 5 amp ceiling rose on the existing switch box / cover including connections etc., as required, Make : Kundan/Anchor/Vinay:

Code No.1.3.17 Supplying and fixing of the following sizes of Teak wooden board on recess including cutting the wall and finishing the surface good the same as required - 375mm X 300mm X 50mm. Deep

Code No.1.3.8 Supplying and fixing of the following sizes of Teak wooden board on recess including cutting the wall and finishing the surface good the same as required - 250mm X 200mm X50mm. Deep

Code No.1.6.17 Providing and fixing of following size phenolic coated sheet on existing wooden board: - 375mm X 300mm X 3mm Thick

Code No.1.6.7 Providing and fixing of following size phenolic coated sheet on existing wooden board: - 250mm X 150mm X 3mm Thick

Code No.1.5.1 Supplying and drawing of 1.5 sqmm. FR PVC insulated, coper conductor, single core cable in the existing surface / recessed, PVC / steel conduit / PVC casing and capping as required. Make : Finolex / Polycab:-

Code No.1.5.2 Supplying and drawing of 2.5 sqmm. FR PVC insulated, coper conductor, single core cable in the existing surface / recessed, PVC / steel conduit / PVC casing and capping as required. Make : Finolex / Polycab:-

Code No.1.5.3 Supplying and drawing of 4.0 sqmm. FR PVC insulated, copper conductor, single core cable in the existing surface/recessed, PVC/steel conduit/PVC casing and capping as required.Make: Finolex/Polycab:-

Code No.1.7.1.1 Supplying and fixing S.P 1 way 5/6amps piano/flush type switch on the existing switch box/cover including connections etc. as required. Make: Kundan /Anchor/Vinay :-

Code No.1.7.1.3 Supplying and fixing 3 pin 5/6amps piano/flush type socket outlet on the existing switch box/cover including connections etc. as required. Make: Kundan /Anchor/Vinay:-

Code No.1.7.1.4 Supplying and fixing S.P 1 way 15/16amps piano/flush type switch on the existing switch box/cover including connections etc. as required. Make: Kundan /Anchor/Vinay:-

Code No.1.7.1.6 Supplying and fixing 3 pin 15/16amps piano/flush type socket outlet on the existing switch box/cover including connections etc. as required. Make: Kundan /Anchor/Vinay:-

Code No.2.2.2.1 Supplying and fixing 6 amps to 32 amps rating ,Single pole,240 volts,'c' series,miniature circuit breaker suitable for lighting and other loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Make:ABB/L&T Hager

Code No.2.1.3 Supplying and fixing following way single pole and neutral,sheet steel, MCB distribution board, 240volts, on surface/ recess, complete with tinned copper busbar, neutral busbar, earth bar, din bar, detachable gland plate, interconnections, phosphatized a complete with tinned copper busbar, neutral busbar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powdered painted including earthing etc as required:(But without MCB /RCCB/Isolator) Make:Siemens/ABB/L&T Hager. 8 Way - SPN,double door,MCB DB

Code No.3051 & 3112 1 x 40W box type single tube light fitting with copper choke & starter with tube. Make: Philips/Bajaj

Code No.3116 Supply of 25w CFL lamp for pendent holder. Make: Philips

Code No.3127 1200mm sweep double ball bearing ceiling fan. Make:Almonard/Usha

Code No.1.7.1.15 Supplying and fixing Step type socket Fan Regulator on the existing switch box/cover including connections etc. as required. Make:Kundan/ Anchor/Vinay:-

Code No. 3053 Supplying and fixing of 1x36w/40w single tube street light fittings with sheet aluminium housing and UV stabilized acrylic cover Make. Philips/Bajaj.

Code No.9.118.3 Providing and fixing to existing door frames - 25mm thick PVC flush door shutters made out of a one piece Multi chamber extruded PVC section of the size of 762mm x 25mm or less as per requirement with an average wall thickness of 1mm + or - 0.3mm.PVC foam end cap of size 23x10mm are provided on both vertical edges to ensure the overall thickness of 25mm.An MS tube having dimensions 19mm x19mm and 1.0mm (+- 0.1mm) is inserted along the hinge side of the door.Core of the door shutter should be filled with High density polyurethane foam. The top & bottom edges of the shutter are covered with an end -cap of the size 25mm x11mm.Door shutter shall be reinforced with special polymeric reiforcements as per manufactures' specification to take up necessary hardware and fixtures. Stickers indicating the locations of hardware will pasted at appropriate places.

Code No.11.61 Providing and laying 22mm thick factory made pre polished cement concrete flooring tiles of required colour and design over 20mm thick cement mortar 1:4 ( 1 cement : 4 sand) and jointed with cement slurry mixed with an admixture of pigment to match the shade of the tile - (Endura \ Ultra \ Dazzle \ Technic)