Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.7 LAccepted-AOC | L1 | Accepted-AOC Accepted | |
| 2 | L2₹25.5 L+₹3.8 L (17.3%)Rejected-Finance | L2 | Rejected-Finance Second lowest | |
| 3 | L3₹26.8 L+₹5.1 L (23.4%)Rejected-Finance NO 16 TULASA NIWAS GANESH NAGAR SAMBRA BELAGAVI 591124 | BELAGAVI | BELAGAVI | KARNATAKA | 591124 | L3 | Rejected-Finance Third lowest | |
| 4 | L4₹28.9 L+₹7.2 L (33.0%)Rejected-Finance | L4 | Rejected-Finance Fourth lowest | |
| 5 | L5₹29.7 L+₹7.9 L (36.5%)Rejected-Finance HARIPUSHPA APARTMENT BUILDING NO E 1 FLAT NO 01 REST CAMP ROAD DEOLALI CAMP 422 401 | DEOLALI CAMP | NASHIK | MAHARASHTRA | 422401 | L5 | Rejected-Finance Fifth lowest |
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
24 Apr 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF Sambra
GE AF Sambra ATS Sambra Belgaum 591124
REPAIR TO SEWAGE LINE AND CONNECTED WORKS IN MES COLONY, NORTH CAMP, MUTAGA CAMP, TILAKWADI AT ATS BELAGAVI
2024_MES_648795_1
GE(AF)/SAM/TOK-12 OF 2024-25
Open Tender
Civil Works
Item Rate
180 days
GE AF Sambra
Please refer Tender documents
8 documents required · 8 mandatory
₹500
GE AF Sambra
₹70,000
Yes
10 Jun 2024
1 Apr 2024
26 Apr 2024
1 Apr 2024
24 Apr 2024
19 Apr 2024
Amount
Demolition of reinforced cement concrete in roofs, manhole cover slab, floors not exc 15 cm thickness (below or above ground level) complete all as specified and directed.
Taking down cement rendering/plastering of any thickness and of any description including racking out joint, hacking for key, scrubbing down with water etc., over wall or ceiling surface complete all as specified and directed.
Demolition of cement concrete (unreinforced) of any description and in any position complete all as specified and directed.
Demolition of plain cement concerete in ground floor and pavings not exc. 15cm thickness (below or above ground level) complete all as specified and directed.
Excavation in trenches not exc. 1.5m wide and not exc 1.5m depth for sewage line and manholes, drain etc and getting out in hard/dense soil complete all as specified and directed.
M&L for 75mm thick plain cement concrete 1:2:4 , type B-1 (using 20mm graded crushed stone aggregates) for sub-base of floors & pavings or similar work finished fair and even complete all as specified and directed.
M&L for 75mm thick plain cement concrete 1:4:8, type D-2 (using 40mm graded crushed stone aggregates) for sub-base or similar work finished fair and even complete all as specified and directed.
M&L for 75mm thick plain cement Concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregates) as in flooring including necessary form work and finished the surface even and smooth using extra cement complete all as specified and directed
M&L for plain cement concrete 1:2:4, type B-1 (using 20mm graded stone aggregates) as in coping, channel, benching of manhole or similar works complete all as specified and directed.
M&L for pre-cast reinforced cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregates) as in man hole covers or similar type of items complete all as specified and directed.
M&L for Salt-glazed stoneware drain pipes 200mm bore grade 'A' laid in trenches and jointed and tested including demolition of existing drain pipes complete all as specified and directed.
M&L for Salt-glazed stoneware drain pipes 150mm bore grade 'A' laid in trenches and jointed and tested including demolition of existing drain pipes complete all as specified and directed.
Removing excavated material not exc. 50m and depositing where directed at a level not exc. 1.5 m above the starting point complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm, soil retreived from excavation complete all as specified and directed.
M&L for PCC (1:3:6) type C2 (using 40 mm graded crushed stone aggregates) for concrete bed to drain pipes including packing under and haunching against side of pipes 200 mm bore after they are laid down, jointed and tested complete all as specified and directed.
M&L for PCC (1:3:6) type C2 (using 40 mm graded crushed stone aggregates) for concrete bed to drain pipes including packing under and haunching against side of pipes 150 mm bore after they are laid down, jointed and tested complete all as specified and directed.
S&F in repair 0.63mm thick galvanised mild steel, plain sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed.
M&L for cutting or uprooting grass on old mud phuska/APP/RCC roof treatment etc., removing rubbish off the premises, cleaning surface without disturbing the existing treatment over roof including removal of tree/roots over wall surface of that building complete all as specified and directed. (Note :-only roof surface area will be measurement and paid)
M&L for plain cement concerete 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in foundation filling and mass concerete complete all as specified and directed.
M&L for pre-cast plain cement concrete masonry work with solid blocks using type C-1 , 1:3:6 concrete mix (using 20mm graded crushed stone aggregates) and setting in cement mortar 1:4 having minimum compressive strength of 50 Kg per Sqcm including demolition of existing masonary work complete all as specified and directed.
S&F 4mm thick sheet glass including new glazing pins, glass putty, wooden beading for fixing glass including taking down of glass from wooden/steel section complete all as specified and directed.
M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 mixed with WPC @ 2% by weight of cement on iternal surfaces and the surface is finished even and smooth without using extra cement complete all as specified and directed. Note : WPC shall be measured and paid separately.
M&L for rendering 15mm thick cement plaster on external surfaces of brickwork with cement mortar (1:4) and finished fair and even complete all as specified and directed.
Supply only Integral water proofing compound complete all as specified and directed.
S&F mild steel TMT bar 10 mm dia and over, cut to length, bent to shape as required including cranking bending or hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.
M&L for cleaning of septic tank by blocking temporarily the inlet with approprite wooden plugs and bailing/pumping out water in liquid/semi liquid state from septic tank/soak pit and scraping out sludge, organic matter /inorganic matter, soft/semi solid material and removing to outside of MoD land in sealed tank container mounted over trolley/transport vehicle, self driven electrical/mechanical pump and filling into shallow pits at their own arrangement with due permission from local municipal/civil authorities at his/her own arrangement and removal of wooden plugs and channeling the water back into soakage/septic tank on the same day complete all as specified and directed. Note:- Measurement will be carried out in cubic meter capacity of sealed/closed container under which all sludge/water will be measured as capacity of tank and nothing extra will be paid on this account. Complaint Slip Book shall be provided by contractor without any extra cost. (Format of complaint slip attached)
M&L for clearing of blokage from Manholes, Grease trap, Nahani trap, WC, Floor trap, etc including washing/cleaning upto 1st manhole complete all as specified and directed. Note:-Clearing of blockage up to 15 (Fifteen) days interval in one pit in the same place is deemed to be included in the quoted rate and after 15 (Fifteen) days of cleaning if bolcked in the same pit shall be measured separately). Measurement shall be carried out for each qtr wise. Complaint Slip Book shall be provided by contractor without any extra cost. (Format of complaint slip attached)
M&L for cleaning of sewage line of any diameter by roding and of any description including manholes by machines or other means of mechanical tools to clear the sludge/ blockage inside the sewage line The manholes will be flushed with water to drain out sludge etc. inside the sewage line from manholes to ease the flow of sewage including removing the sludge and re-fixing the manhole cover complete all as specified and directed. Note: Minimum two safaiwala alogwith two helpers with all tools and plant will be engaged by the contractor per day irrespective of one complaint and complaint will be attended and completed within same day. Clearing of blockage up to 15 (Fifteen) days interval the same place is deemed to be included in the quoted rate and after 15 (fifteen) days of cleaning if bolcked in the same pit shall be measured separately. Complaint Slip Book shall be provided by contractor without any extra cost. (Format of complaint slip attached)
M&L in repair PVC (SWR) nahani trap, with PVC 150X150mm size openable at center grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed.
S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls 110mm bore fixed with mild steel clamps of suitable size over walls including dismantling and breaking up drain pipes complete all as specified and directed.
S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls 75mm bore fixed with mild steel clamps of suitable size over walls including dismantling and breaking up drain pipes complete all as specified and directed.
S&F PVC (SWR) bends any radius 110mm bore with access door complete all as specified and directed.
S&F PVC (SWR) bends any radius 75mm bore with access door complete all as specified and directed.
S&F PVC (SWR) junction single, (single T) equal or unequal 110mm bore pipe with access door complete all as specified and directed.
S&F PVC (SWR) junction single, (single T) equal or unequal 75mm bore pipe with access door complete all as specified and directed.
S&F PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches 110mm bore including dismantling and breaking up drain pipes complete all as specified and directed.
S&F PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches 75mm bore including dismantling and breaking up drain pipes complete all as specified and directed.
S&F PVC (SWR) 75mm internal bore cowl complete all as specified and directed.
S&F PVC (SWR) 110mm internal bore cowl complete all as specified and directed.
S&F 100m dia SS grating with or without hole fixed over floor/nahani trap with white cement including taking down of existing grating and floor cutting complete all as specified and directed.
S&F 32/40mm dia PVC waste pipe for urinal/wash hand basin/kitchen sink of suitable length including taking down of existing pipe complete all as specified and directed.
M&L for preparaing old decorated plastered or unplastered surface of wall and apply two coats of cement base paint including scrapping down of old finish completely complete all as specified and directed.
M&L for preparaing new un decorated plastered or unplastered surface of wall and apply two coats of white wash complete all as specified and directed.
Taking down carefully structural steel work including doors, gates but excluding framed truss by cutting the hinges with grinder and welding from existing opening complete all as specified and directed.
S&F framed work such as in fancy gates, sliding gates, including their moving tracks made with hollow tubes, angle, flats, "C" channels, Tee, plain mild steel bar, MS sheet etc., or of similar type of work conforming to Fe.290.Gde-E-165 complete all as specified and directed.
S&F purpose made butt hinges, steel roller, rigid castor with bracket, sliding door bolts, tower bolts, fancy spikes or similar type of work fixed with welding conforming to Fe-290 Gde-E-165 suitable for stone/concrete door, steel gates and window frames complete all as specified and directed.
M&L for sand filling under paver block/floors or in foundations including watering and consolidation complete all as specified & directed.
M&L for 60mm thick machine pressed precast concrete interlocking paver block, rubber moulded of any shape and size confirming to IS 15658-2006, M-35 Grade of concrete with grey cement and pigment including dismantalling of existing paver block complete all as specified and directed.
S&F framed work such as in grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe. 290, Gde-E-165 complete all as specified and directed.
M&L for preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint duly filled the voids with enamel based putty over one coat of red oxide primer complete all as specified and directed.
M&L for preparation of old decorated wall surface and applying two coats of oil bound distemper finished smooth surfaces complete all as specified and directed
M&L for preparation of old plastered ceiling surfaces and applying two coats of white wash all as specified and directed
M&L for preparing, washing, rubbing down and complete removal of existing treatment for applying two coats of acrylic emulsion paint of Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives over and including priming coat of exterior primer applied on old decorated surfaces of walls including necessary filling of voids with wall care putty complete all as specified and directed.
M&L for preparation of old steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint duly filled the voids with enamel based putty on existing steel gate, fencing post etc., complete all as specified and directed.
M/S MAHADEV M PATIL
PURVIK CONSTRUCTIONS
DHANSHRI ENTERPRISES
Vinod Enterprises
ASHIRWAD ELECTRICALS
M/s. VIJAY ELECTRICALS
M/S. ADARSH ENTERPRISES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .