Karnataka

AOC

Works

Buildings

CONSTRUCTION OF PUBLIC TOILET FOR THE DISABLED AND TRANSGENDERS IN THE MANGALORE DISTRICT COURT BUILDING PREMISES

Public Works Department

PWD Division Office Mangaluru | Dakshina Kannada, Karnataka

Amount: ₹8.0 LCloses: 13 Apr 2026Closed

Timeline

Published6 Apr 2026
Closed13 Apr 2026
Awarded—

Bids

1 Bid13 Apr 2026

#	Company	Amount	Status
1	STANLEY ASSOCIATES ₹6.8 Laccepted-aoc	₹6.8 L	accepted-aoc

Tender Value

₹8.0 L

EMD Value

₹20,100

Closing Date

13 Apr 2026, 10:30 pmClosed

Tender Inviting Authority

Office Inviting Bids

Public Works Department

Contact Person

EXECUTIVE ENGINEER

Office Number

Work Description

CONSTRUCTION OF PUBLIC TOILET FOR THE DISABLED AND TRANSGENDERS IN THE MANGALORE DISTRICT COURT BUILDING PREMISES

Tender Information

Tender ID

PWD/2026-27/BD/WORK_INDENT35443

Reference Number

PWD/2026-27/BD/WORK_INDENT35443

Tender Type

Open

Product Category

Buildings

Form of Contract

Two Tender Document System(Two Cover)

Location

PWD Division Office Mangaluru

Source Website

Subscribe to view

Documents Required

4 documents required · 4 mandatory

Technical Bid

Requiredprofit and loss statement ,Balance sheets certified from an Registered Chartered Accountant

RequiredKPWD Class IV and above Registration Certificate.

Requiredexisting commitments and on-going works

RequiredAssessed available tender capacity

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

In the Sanctioned Estimate, the item rates are showing inclusive of all applicable taxes but it is to be noted that rates are exclusive of taxes (GST)

Estimate rates are excluding GST as per Common SR 2023-24 continued to 2025-26 and prevailing GST (18% of Amount Put to tender) amount is kept in the form of Lump sum in sanctioned estimate according to guidelines in Common SR 2023-24 (As per the circular from Govt of Karnataka no.12/2024 Bengaluru dt:09.08.2024). Therefore, Amount put to Tender and ECV amounts are excluding GST even though it is showing inclusive Tax in Draft Tender Schedule Process. Hence, GST will be paid separately for the quoted amount accordingly. The bidder has to quote the rate exclusive of GST and to submit a declaration which is duly signed by the bidder along with their tender proposal.

Tenders from Joint ventures are not acceptable.

The contractor shall submit the details of technical staff employed by him.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of KPP-Portal on or before the last date and time of bid submission.

EMD Payments shall be made through e-payment mode only and same shall be made as one single transaction and payments made in part are liable for rejection.

Conditional tenders will not be accepted.

The tenderer shall bear all costs associated with the preparation and submission of his tender, and the employer will in no case be responsible and liable for those costs.

The cost of the Tender form shall not be refundable.

The employer is not responsible for any delay in accessing Karnataka Public procurement (KPP) portal.

Royalty on construction materials and other applicable taxes will be deducted as per prevailing Government orders.

All the formats prescribed in the bid document shall be filled by the tenderer in complete manner.

All scanned documents to be uploaded shall be in original and the Executive Engineer reserves the right to verify the documents before approval.

The employer reserves the rights to Reject or accept any or all the tenders without assigning any reasons.

All safety precautions, warning signs, night illumination, reflectors, deployment of security guards has to be ensured so that no untoward incidents happens on account of negligence or any project activity. Contractor should indemnify the client to that extent.

The item rates quoted shall include cost of royalty charges on construction materials and other taxes as per the rates provided in prevailing cost & conveyance of all materials, Curing, Watering, unloading with all leads & lifts, labor, hire charges of machinery equipment etc., complete including all incidental charges. All the items shall be executed as directed by the Engineer in charge of the work.

Further particulars, if any queries required to the Contractor, they can get from the office of the concerned Executive Engineer, PWD Division, during office hours on all working days.

Contractor should follow strictly the prevailing rules of labour act.

The Tenderer should furnish all necessary original documents mentioned in the bid document to the Executive engineer at the time of verification of documents during Technical Bid evaluation.

The intending bidders are requested to note that they should abide by the instructions and conditions contained in the bid documents and further orders thereon.

Contractor has to upload the valid EPF registration copy.

The successful bidder has to follow the prevailing Government orders regarding Royalty Charges. The Contractor has to submit MDP Certificate along with the running contractor bills. Otherwise Department will take necessary action as per the Government Orders/Circulars.

Increase in GST shall not be paid in the extended period of contract.

As per Karnataka state Government order LD.300.LET.2006 Bangalore dated 01.01.2007 and Government letter no PW.134.BMS.2007 dated 27.07.2007 a sum amounting to 1 Percent of the bill amount will be deducted towards constructions labour welfare fund.

Contractor should take all precautions to ensure that no damage is caused to the existing works and other similar structures which have been constructed by other agencies during project execution. If any damage is caused, it has to be rectified on his own risk and cost.

Materials like bitumen, steel and cement etc., required for the work shall be procured by the tenderer themselves and should got tested by the Quality Assurance Authority before commencement of the work.

Work shall be carried out according to relevant IS/IRC codes specifications depending on type of work.

The bidder has to establish field laboratory at the work site as per GO No:PWD/243/SEV/2013 Bengaluru dated:22.07.2014.

The Defect Liability period for this work is one year

Technical Criteria

General

Department Registration Details

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of existing commitments and ongoing work

List of works for which tenders already submitted

Banker Details

Capabilities of Vendor

KPWD Class IV and above Registration Certificate.

PWD Registration Certificate (Class I/II/III/IV)

List of existing commitments and ongoing work.

Others -- Existing & Ongoing Commitment Statement.

Assessed available tender capacity: (AxNx2.5-B), where A is the maximum value of civil engineering works executed in any one year during the last five years (updated to current financial year price level) (FY in which tenders are invited), taking into account the completed as well as works in progress. N: Number of years prescribed for completion of the works for which tenders are invited. B: Value, at the current financial year (FY in which tenders are invited) price level, of existing commitments and on-going works to be completed during the next 02 months. (Period of completion of the works for which tenders are invited)

Others -- Assessed available tender capacity.

Financial Status

Attach the last five years profit & loss statement certificate countersigned from a chartered accountant with UDIN Number is to be submitted.(2020-21 to 2024-25)

Others -- Attach the last five years profit & loss statement certificate countersigned from a chartered accountant with UDIN Number as to be submitted.

Work Locations

Fee & Financial Details

Tender Fee Amount

₹500

EMD Fee Amount

₹20,100

Important Dates

Last Activity

13 Apr 2026

Published

6 Apr 2026

Bid Opening

15 Apr 2026

Download Ends

10 Apr 2026

BOQ Preview

•

CONSTRUCTION OF PUBLIC TOILET FOR THE DISABLED AND TRANSGENDERS IN THE MANGALORE DISTRICT COURT BUILDING PREMISES

•

Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Providing and constructing laterite size stone masonry including cost and conveyance of all materials curing etc complete as per specification

•

I.S. 3620/1979 having compressive strength not le...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Providing and constructing laterite size stone masonry including cost and conveyance of all materials curing etc complete as per specification

•

I.S. 3620/1979 having compresSive strength not le...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to open...

•

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixi...

•

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jo...

•

Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings...

•

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light ...

•

Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off c...

•

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 ...

•

Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elasto...

•

Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 15...

•

Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Pr...

•

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even an...

•

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of...

•

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint...

•

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thick- ness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades,...

•

Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...

•

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, w...

•

Providing and fixing Bidet spray made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - class - Economy ---- Including cost and conveyance of all materia...

•

Providing and fixing Bib cock Two way with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - class - Premium ---- Including cost and con...

•

Providing and fixing PTMT pillar cock of approved quality and colour: 15 mm nominal bore, 107 mm long, weighing not less than 110 g ---- Including cost and conveyance of all materials, labour, hire ch...

•

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...

•

Providing and fixing mirror of superior Glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Circular s...

•

Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of app...

•

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :

•

Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete ---- Including cost and conveyance of all materials, labour, hire charge...

•

Providing and fixing Bib cock with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete- class - Economy ---- Including cost and conveyance o...

•

Providing and fixing Towel rail 600mm length made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - class-Economy ---- Including cost and conveyance of a...

•

Steel Fabrication Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/we...

•

Fixingoneexhaustfanaftermakingasuitablenotchinthewallandfinishingwithcementmortarandcolouringtomatchtheexistingwallorbrackets,withboltsandnutsanda5A,ceilingrosewithsufficientlengthof23/0.0076inchPVCin...

•

Wiringforlighting/powercircuitusingoneofFRLSPVCinsulated1100Vgrade,multistrandcopperwirewithlowconductorresistancesinglecoreinopenorconcealedsystemofwiringwithspecifiedIS-694:2010

•

SupplyingheavygaugePVCConduitPipe.dia.mmthickwithsuitablesizebends,metaljunctionboxesadhesivepasteetc.,bygroovecuttinginthewallandfixingbybracingUorJhooksandcementplasteringuptothewallsurfaceandrunwit...

•

Supplyingandfixingofmodularswitch&connectedaccessoriesonexisting modular switch plate as per IS 3854 and IS 1293.6A One Way Switch

•

---- Including cost and conveyance of all materia...

•

Supplyingandflushmountingpowdercoated/galvanizedmetalboxsuitableformountingmodularswitchplates.Theboxshouldbefirmlyflush mounted after due groove cutting in Brick/Stone/C.C wall.1-2 Way

•

Supplyingandfixingsuperiorqualitymodularswitchmountingpolycarbonateplatewithnecessarysupportingbackplatewithrequirednos.ofmachinescrews,boltsnutsetc.,completeontheexistingmetal/PVC box.1 to 2 Module ...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

bid document kw1 35443.doc

Tender Document • 1.47 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

STANLEY ASSOCIATES

₹6.8 Laccepted-aoc