SPECIAL REPAIR TO CERTAIN SECURITY INFRASTRUCTURE AND BLDG NO P/107 AND CERTAIN MAJOR REVNUE AND MINOR WORKS AT AIR FORCE STATION AVADI

Amount

Taking down plastering on lathing (other than wire-netting), without removing lathing, in cement or cement-lime mortar (one side only measured in cases where both sides are plastered) etc complete all as directed

M&L for rendering 10mm thick on wall/vertical surface of brick work/concrete work in CM 1:6, surfaces finished even and smooth without using extra cement all as specified

M & L for complete removal of existing treatment and preparing wall surfaces and applying two coats of oil emulsion distemper over a coat of alkali resistant primer over 3mm thick wall care putty all as specified and as directed.

M&L for preparation of old surfaces including brooming down or steel wire brushing, scrapping down smoke soot,moulds, moss and efflorescent salts and trading oil and greasy spots on walls and applying one coat of cement base paint including cleaning the floor/ joinery surfaces, glass panes all as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises. complete all as specified and directed.

S&F vitrified tiles 10mm thick (Square/rectangular) polishedin light shade, area of each tiles n.exc 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in cement mortor 1:4 complete all as specified and directed.

M&L for Non skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular ) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors etc . set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over 20 mm thick screed bed in CM 1:4 complete all as specified and directed.

S & F Glazed ceramic coloured tiles of 300x200x 7mm thick tiles on vertical surfaces using glazed economy finish grade B III ceramic tiles set and jointed in neat cement slurry and pointed in white or coloured cement to match over rendering in CM 1:3 , 10mm thick on fair faces of brick/concrete wall surfaces complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar.

Material and labour for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. including grinding and polishing complete laid over screed bed or bedding layer of 15 mm thick in cement mortar (1:4) for laying floors, steps, window cills, cooking platforms etc , complete all as specified and as directed.

S&F in repairs Vitreous China wash Basin (flat back or angle back type) , of size 550x400mm including brackets, PTMT waste coupling 32mm, and PVC 32mm dia waste pipe including cutting for and pinning in ends of brackets or erecting stand etc, complete all as specified and directed

S&F in repair tubular towel rail alumunium anodised , 20mm dia, D type 60 cm long between flanges all as specified and directed

S&F 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement, all as specified and directed.

S&F 15mm in repairs dia Pillar taps cast copper alloy, with capstan heads,chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts,screwed for iron pipe, complete all as specified

S&F in repairs 15mm dia stop valve/Angle valve, chromium plated fancy type cast copper alloy, screwed down high pressure, with crutch or butter fly handle, screwed both ends for PVC/iron pipes or for unions and fixed of,complete all as specified and directed.

S&F in repair 15mm dia bib tap cast copper ally with crush or butterfly handle scrwed down screwed for iron pipe or for brass ferrule and fixed

Taking up or down steel tubing 15 mm bore and connections, etc all as directed.

All as per item No 18 above but for 20mm bore

S&F Unplasticised PVC pipes and fittings of 15mm dia of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc. complete all as specified and directed.

All as per item No 20 above but for 20mm bore.

M&L for Cutting chases or making holes in brick walls for concealed water tubing, making good to facings where required, cutting not exc 10 cm girth all as directed

S & F PVC connections 15mm size with PTMT nuts of length 600 mm.

Taking down Steel/wooden window or frame exc. 1.50 sqm but nexc 4 sqm each with shutter (without taking of shutter from the frame) and removing from site complete all as specified and as directed.

S&F anodised aluminium sliding windows, all as given here-in-after complete all as specified and as directed. Frame:- Three track section shall be of weight not less than 1.060 kg/m. Shutter:- Consists of 03 Nos Shutters i.e 02 Nos od Glazed shutters and 01 No of Gauzed shutter. Sections of shutter (stiles and rails) sections shall be of weight not less than 0.562 kg/m. Builders hardware:- Standard locking device for glazed shutters. Note :- (a) All aluminium sections including glazing clips, snap beading, joining cleats, rubber packing, screws etc., as required are deemed to be included in the rate quoted. (b) Glass or wire cloth as required shall be measured and paid separately. (c) The fixtures given are for window unit of size exceeding 1.0 sqm but not exceeding 2.20 sqm.

M&L for forming jambs to openings in CM 1:4 including cutting, toothings and properly bonding into old work including facing and pointing to match existing work, complete all as specified and directed.

S & F anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.

S&F MS framed work such as grills, gratings etc with ends of bards shouldered and/or riveted, or forged into spikes; framed guard bars, barred iron doors, ladders, frames balusters, walk ways, railings, framework of water tanks and similar work confirming to Fe 290 Gde E-165 all as specified and directed.

Taking down shutters of any description exc 1 Sqm & nexc 2 Sqm each and removing from site complete all as specified and as directed.

S & F 35 mm thick flush door shutter solid core construction with block board core and plywood face panels commercial type on both side complete all as specified and directed.

S & F 35mm thick 2nd class HW glazed and skeleton shutters (partly pannelled and partly glazed) open rebated and prepared to receive glass/wire cloth gauge etc,(without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR part I, sectiion 8, clause 8.20(a).

M & L Preparation of new wood surfaces of any description over 10cm width or girth and applying two coats of Synthetic enamel paint over a coat of pink primer complete all as specified & directed.

S&F Galvanised mild steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks,or galvanised wire staples complete all as specified and as directed

S&F 100mm size, butt hinge medium weight cold rolled mild steel & fixed complete all as specified & directed.

S&F 300 mm long Aluminium alloy anodised sliding door bolts with hasp and staple(bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium and fixed.

S&F for 150mm length aluminum, anodised, barrel tower bolts of extruded section and fixed.

S&F 150mm size aluminum handles, cast type anodised complete all as specified & directed.

S&F Mild Steel 300mm ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed.

S&F in repairs Stainless steel plate rack of size 900X800X230mm with screws and necessary fittings incl cutting to hole fixed to wall complete all as specified and directed.

S&F rotational moulded polyethylene water storage tank consisting of three laver cylindrical vertical with top closed hoisted and fixed in position inluding dismantling of old water tanks and removing to store all as specified and directed capacity 1000 ltrs.

S&F Ball valves, high pressure, with of PTMT with epoxy coated aluminium rod & high desity plastic ball screwed for iron pipe of 25 mm bore (Minimum weight 455 gms) and fixed complete all as specified and directed.

S & F in repairs stainless steel sinks with drainage board made of 1mm thick kitchen with plugs washer, waste pipes, cast iron cantilever brackets, connecting union to pipe over all size 915mm x 460mm bowl size 410 x 330 x 160mm, including bedding in cement mortar to dwarf wall including fixing cantilever brackets and connecting unions to pipe. All as specified.

S & F PVC (SWR) pipes in any length with or without ears, with rubber ring joints 75mm dia fixed to walls including taking down existing unserviceable pipes all as directed.

All as per item No.43 herebefore but 110 mm

S&F PVC(SWR) bends any radius of 75mm dia

S&F PVC(SWR) bends any radius of 110 mm dia

Complete Removal of existing water proofing treatment over roof including PCC of any thickness description in any position including cleaning wire brushing, watering remove of debris up to 1500 mtr distance etc., complete all as specified and as directed.

Material and Labour PCC for 1:2:4 type B-0 using 12.50 mm stone aggregate as in, levelling course using integral water proofing compound as per manufacturers instructions all as specified and directed. Note:- WPC shall be measured & paid seperately.

Material and Labour for Rendering/ bedding layer of mortar 10mm thick in CM 1:3 on brick or concrete surfaces mixed with integral water proofing compound as per manufactures instruction while the concrete is green. Note:- WPC shall be measured & paid seperately.

Supply only liquid water proofing compound all as specified.

M&L for preparing the rendered surface thoroughly to remove all loose particles, dirt / dust particles and applying a uniform coat of blown grade bitumen VG-10 @ 1.20 kg/sqm conforming to IS 702 over a coat of bitumen primer @ 0.40 Litres / Sqm followed by APP membrane reinforced with polyster non woven fabric 3mm thick weighing not less than 3.6 kg / sqm laid on primed surface by forced application followed by a finishing coat of solar reflective aluminium paint @ 0.10 litres / Sqm complete all as specified and as directed. complete all as specified and as directed.

Excavation in post holes or (Similar holes) each n.exc 0.5cum, getting out, returning filling in and ramming earth or broken rubber mixed with earth around in layers, n.exc 25 CM watering and removing surplus soil to a distance n.exc 50m and making good surfaces in soft/loose soil all as specified.

M&L for PCC 1:3:6 type C2 using 40mm graded Stone aggregate as in foundation of post holes filling and mass concrete all as specified and directed.

S&F Steel work in tubular trusses including special shaped washer, connecting plates etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed.

M&L for two coat of synthetic enamel paint over one coat of red oxide primer on newly prepared steel surfaces over 10cm in width or girth all as specified.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Demolition of plain cement concrete in ground floors and pavings n exc 15 cm thikness (below or above ground level) all as directed.

M&L for PCC 1:5:10, type E2, 100mm thick using 40mm graded stone aggregate as in sub base all as specified.

M&L for chequered cement concrete tiles mixed with grey cement and pigment of size 300x 300 x25 mm thick set jointed and pointed in neat cement slurry in floors incl 20 mm thick screed in CM 1:4 complete all as specified and as directed.

Taking down chowkhats or frames with shuttters (without taking off shutters from frames) n.exc 1.5 sqm each all as directed.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm thick plain colour PVC sheet reinforced with 19mm thick MS square tube of 19 gauge mitre cut at two corners and joined by inserting two Nos of 150mm long brackets of 15mmx15mm MS square tube inside the 19mm MS square tube and suitably screwed complete all as specified and as directed.

S&F factory made solid PVC moulded door shutter with wood free EPS 28 to 30mm thick (styles) with 2,4 or 6 raised panel design with 2mm thick moulded PVC sheet on front face and 2mm plain colour PVC sheet on backface, supplying and fixing in frame at site as per specification complete all as specified and as directed.

S&F 75mm size type C21 Butt hinges extruded aluminium alloy with galvanised mild steel hinge pin anodised complete .

S&F aluminium handle 100 mm cast type anodized

S & F aluminium anodized tower bolt 100mm size complete all as specified and directed.

M&L for second hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints etc complete all as specifed and directed

S&F second class Hard wood factory made plain framed panelled shutters of 30mm thick (any No of pannels ) with pannel of 9mm ply BWP commercial type all as specified and directed

S&F second class hard wood factorymade Glazed and skeleton shutters of 30mm thick, open rebated and prepared to receive glass, gauze, etc., divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc.

S&F 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed with screws

Powder coated aluminium sliding windows, all as given here-in-after complete all as specified and as directed. Frame:- Three track section shall be of weight not less than 1.060 kg/m. Shutter:- Consists of 03 Nos Shutters i.e 02 Nos od Glazed shutters and 01 No of Gauzed shutter. Sections of shutter (stiles and rails) sections shall be of weight not less than 0.562 kg/m. Builders hardware:- Standard locking device for glazed shutters. Note :- (a) All aluminium sections including glazing clips, snap beading, joining cleats, rubber packing, screws etc., as required are deemed to be included in the rate quoted. (b) Glass or wire cloth as required shall be measured and paid separately.

M&L for complete removal of existing treatment including preparation of wall surfaces and applying two coats of oil emulsion distemper over a coat of alkali resistance primer all as specified and directed.

Taking down cement plaster on brick or concrete walls/ ceiling surfaces in patches etc. of any description including racking out joints, hacking for key, scrubbing down with water; rubbish off the premises etc., complete all as specified and as directed.

Material and labour for rendering 5mm thick in cement mortar 1:3 on fair faces of concrete surfaces as in ceilings, finished even and smooth without using extra cement etc., complete all as specified and as directed.

Material and labour for rendering 10mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces as on walls, finished even and smooth without using extra cement etc., complete all as specified and as directed.

Material and labour for Preparation of newly plastered surfaces of walls and applying two coats of oil emulsion distemper over a coat of alkali resistant primer all as specified and as directed.

Material and labour for Preparation of newly plastered surfaces of ceilings and applying three coats of white wash all as specified and as directed.

Material and labour for Preparation of old plastered or unplastered surfaces of walls including brooming down, steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash all as specified and as directed

All as per item No. 77.00 described here-in-before but on ceiling.

Material and labour for preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint etc., complete all as specified and as directed.

Material and labour for preparation of old painted steel and iron surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint etc., complete all as specified and as directed.

S & F in repair PVC Bib taps PTMT (Symet) 15mm dia (Any colour) screwed down for iron pipe or for brass ferrule.

S&F in repairs 15mm dia Pillar tap standard of PTMT any colour screwed for iron pipe (minimum weight 15 mm -110 gm)

S&F in repairs 15mm dia stop valve of PTMT any colour screwed for iron pipe and fixed (minimum weight 15 mm -90 gm)

S&F in repairs 15mm dia angle valve of PTMT any colour screwed for iron pipe and fixed (minimum weight 15 mm -90 gm)

S&F in repairs Swivel shower of PTMT any colour for fixing with 15 mm pipe ( minimum weight 40 gm) complete all as specified and as directed.

S & F in repair PVC grating 140mm round PTMT (minimum weight 100 gms) with or without dome.

S & F in repair 32mm bore PVC waste pipe for sink / wash basin 90cm long.

S & F in repairs PVC connections 15mm size with PTMT nuts of length 450mm.

supply only PVC valve less flushing cistern syphonic action type, low level, inlet, ball valve, float & handle 10 litre capacity including brackets, flush pipe and all accessories all as directed.

S & F in repairs 20mm bore, ball cock, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gms) all as specified.

S&F in repairs 15 mm dia Bib taps, two way chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for PVC/ iron pipe or for brass ferrule and fixed complete all as specified and directed

S & F in repairs of 2-in-1 faucet with 1.5m tube stainless steel and hook all as directed.

S&F in repairs tubular towel rail brass chromium plated, 20mm dia, D type 60 cmm long between flanges complete all as specified & directed.

S & F in repairs Vitreous china squatting pan of 'Orissa' pattern of size 580x 440mm white with "integral foot rests, complete incl trap set in concrete provision of lime concrete bedding all as directed.

M&L Non skid light coloured ceramic tiles 7 to 8mm thick (Square/Rectangular) area of each tiles exc. 0.06 sqm but not exc. 0.11 sqm, in floors etc,confirming to IS: 15622 : 2006 grade B II (a) matt superior finish flooring, set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed 15 mm thick in CM 1:4 as bedding layer for floor finishes complete all as specified and as directed.

M&L Non skid light coloured ceramic tiles 7 to 8mm thick (Square/Rectangular) area of each tiles exc. 0.18 sqm but not exc. 0.38 sqm, in floors etc,confirming to IS: 15622 : 2006 grade B II (a) matt superior finish flooring, set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed 15 mm thick in CM 1:4 as bedding layer for floor finishes complete all as specified and as directed.

Taking out old serviceable glass of any description, from old wooden or metal frames, or stone, concrete or brick surrounds, any thickness or size; hacking out old putty or removing beads etc. including making good breakages in taking out and removing from site, all as specified and as directed .

S&F 3mm thick plain sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 Sqm.m in each pane. All as specified.

S&F 4mm thick figured glass pin headed type and glazing with oil putty in squares not exc 0.5 sqm in each pane all as specified and as directed .

S&F in repair for Harrison Curtain rails, mild steel, chromium plated with fixing brackets, stops, rollers etc in repair all as specified and as directed.

Taking down shutters of any description exc 1 Sqm & nexc 2 Sqm and easing, adjusting and also refixing builders hardware as required and renewal of unserviceable screws and refixing in the same opening incl painting touch up to match with the existing colour complete all as specified and as directed.

Dismantling PVC water tanks of capacity exceeding 500 litres but not exceeding 1000 litres complete all as directed.

M&L Demoliion of plain cement concrete (unreinforced) concrete of any description and in any position not otherwise specifically provided complete all as specified snd as direted.

M&L for 25mm thick Plain Cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in floor, finished fair and even all as specified.

M&L Screed bed or bedding layer 15 mm thick in CM 1:4 for laying floor finishes all as specified.

S&F in repairs PVC (SWR) bends 110mm bore

Excavating in post holes each not exc 0.5 Cum getting out hard and dense soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance not exc 50m and making good surface all as specified.

M&L PCC 1:2:4 type B1 using 20mm graded stone aggregate in bed plates in foundations etc.all as specified.

S&Fmild steel roof trusses (any type frame ) trussed purlins,crane gantries rail and fastering and havy brackets framing ( beam tee angle, chenal or flate section plate including distance pices , cleats etc. all as specified

S&F Joist, channel, angle, or tee sections, fixed independently, without connection plate, etc all as specified.

S&F mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment of Fe-410-W (Gde-E-250) quality ‘A’ complete all as specified and as directed.

M&L Pre painted galvalume aluminium zinc coating GI based plain steel sheet in ridges 0.50mm thickof an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall,fixed with self tapping screws as specified.

Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exc 5cm long and dia of bolt 16 to 20 mm all as specified.

S&F Framed work as in door or gates of angle or other section with gusset plates, rails, braces, etc complete drilled for fixing of steel sheeting or other covering Doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging also fastening and fixing complete Fe-410-W(Gde-E-250) Quality A

Cutting holes in brick walls for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required exc half brick but not exc one brick complete

Taking down carefully unserviceable point wiring copper / aluminium (light, fan, socket or power) complete, including removal of batten / conduit / gutties / wooden board etc., including fittings and fixtures such as switches, ceiling roses, regulators, sockets, light fittings, fans etc., removal from site under Sch of credit and removal of unserviceable items out of site and making good the disturbed surfaces of walls, ceilings etc., complete all as specified and as directed.

Point wiring on stone / brick masonry wall complete with two 1.5 sqmm single core PVC insulated FRLSH ,1100 volts grade unsheathed cable confirming to IS-694, 1977 with multistranded copper conductor, drawn through and including non-metalic rigid PVC conduit, conduit fittings and conduit accessories not less than 25 mm dia fixed on wall / ceiling / roof trusses etc., and including provision of one 1.5 sqmm PVC insulated single core multistranded copper conductor FRLSH green in colour as earth continuity conductor and connected to common earth dolly, including steel box of required module for modular switches/sockets and regulators all as specified complete.

One light point controlled by one switch.

One Ceiling fan point controlled by one switch.

One Exhaust fan point controlled by one switch.

One 3 pin 5 amps socket point on independent board

One 3 pin 5 amps socket point on same board

One wallmounted fan point controlled by one switch

One bell point controlled by one bell push switch

M & L for pointing wiring with 4 Sqmm (nominal area) PVC insulated,FRLSH unsheathed, multistrand, 1100 volts grade copper conductor cable single core, drawn through with and including non metallic PVC conduit 25mm dia and its accessories fixed on wall/ ceiling/ trusses /steel structure with suitable clamps , screws etc including one run of 4 Sqmm PVC insulated copper conductor cable green in colour for continuous earthing, 1.6 mm thick MS terminal box finished to wall steel structure and with 3 mm thick laminated hylam sheet top cover all as specified for One 5 pin 5/15 amps socket point on independent board complete all as specified

M&L ceiling rose, 3 phase/PVC/polycarbonate, isolated body complete all as specified.

S&F switch piano, flush type single pole, one way 5 Amps complete all as specified.

S&F switch socket outlet 2 in 1, 3 pin, 5 and 15 Amps flush type complete all as specified.

S&F switch socket 3 pin 5 amps , multi pin , flush type,complete all as specified.

S&F electronic fan regulator, flush type phenolic laminated sheet etc; as required.

S&F Surface and wall mounted LED tube light fitting, 20 W, batten type, PC housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver complete with all accessories , suitable for operation on AC, single phase 220 / 230 Volts , 50 Hz supply, and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting complete all as specified and as directed.

S&F LED building security light 25W, made up of pressure die cast housing with toughed glass and individual high power LEDs with secondary optics, IP66 protection and impact resistance of IK07, complete pre wired and connecting up with suitable twin core flexble copper wire including provision of necessary GI tubing medium grade 25mm bore of pipe 1.5 bent to shape with necessary clamps made out of mild steel, nuts and bolts etc., including two coats of synthetic enamel paint over a coat of red oxide primer on exposed steel surface for fixing the fitting to Bldg etc complete all as specified and as directed.

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified.

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 40 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified.

Supply and fixing 415V 10KA 'B' curve miniature circuit breaker (MCB) of TPN and current carrying capacity 40-100 Amp in the DB complete with connection testing and commissioning complete all as specified.

S&F MCCBs100 Amps 415V,16KA, 4 Pole complete all as specified .

Supply and Fixing of Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps complete all as specified.

S&F Load line vertical distribution Board, TPN 4 way double door, fixed on wall semi flush, loadline DB are fitted with Bus bars, neutral links, blanking plates, including incommer MCCB 100 Amps,TP and suitable outgoing MCB 40 /63Amps,SP/TP with all accessories suitable for DB including taking down old unserviceable DB all as specified and as directed. Note :- Incoming MCCB and Out going MCBs measured seperately relevent items.

Taking down unserviceable ceiling fan/Exhaust fan from site and re-fixing in position duly rectifying the defects (replacing of ball and bearing, oiling / greasing,winding etc.) and make it serviceable in all respect including painting and marking MES No complete all as specified and as directed.

M&L for wiring for circuit / power /sub main with two runs of single core 6 Sqmm size and one run of single core 6.0 Sqmm (green colour as earth continuity conductor) PVC insulated, unsheathed, muilti stranded copper conductor FRLSH cable drawn through and including PVC conduit suitable dia for 6 sqmm submain wiring with complete fixing accessories including taking down old wiring complete all as specified.

Supply and fixed on wall or steel trusses for cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 4 core including fixing materials like lugs,cable glands etc including taking down old unserviceable UG Cable complete all as specified and directed.

Material and labour for earth continuity conductor or main earthing lead fixed to valve on batten or recess or chases or burried in ground or drawing in conduit or any other situation for loop earthing etc as reqd 4 mm dia galvanized steel wire complete all as specified and directed by Engr-in-Charge

Earthing complete with galvanised iron earth plate electrode 600mm X 600mm X 6mm thick, with and including earthing of 4mm dia GI wire protected by 15mm dia GI pipe light grade upto a length of 7.5m. The plate shall be buried directly in ground vertically to a depth not less than 2.25 metres below ground level with top edge of the earth plate at a depth not less than 1.5 metres below ground level, connected to earth lead as described here-in-before by means of bolts, nuts, washers and checknuts made out of galvanised iron or mild steel, earthing lead protected by as described here-in-before and connected to main switch board or main control board or electric pole all as shown on electrical plate No.3 of MES Sch Part-I including necessary earth work and excavation in any type of soil, plain cement concrete 1:3:6, type C1 chamber, reinforced cement concrete cover slab with locking arrangement and handle of 10mm dia MS round bars 450mm long, 1:2:4 type B1, 50mm thick with 8mm dia TMT bars at 140mm centre to centre both ways, GI pipe of bore 20mm medium grade for watering with funnel, wiremesh, salt, charcoal, lugs including testing complete all as specified and directed.

S&F Bell push, flush type, single pole, 5 Amps, 240 volts complete all specified.

S&F Bell , ding-dong type , AC, 215 volts, 50 HZ complete all as specified.

S&F of Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified.

Fixing only emergency LED lamp for capacity 12 w with accessories complete all as specified. Note:- LED lamp shall be shall be issued under sch 'B' free for fixing only

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of SPN and current carrying capacity 40-63 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified.

S&F Surface and wall mounted LED tube light fitting, 10 W, batten type, PC housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver complete with all accessories , suitable for operation on AC, single phase 220 / 230 Volts , 50 Hz supply, and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting complete all as specified and as directed.

S&F MCB DB SPN 8 way, double door, powder coated, 240 volts, AC, 50Hz, IP 43 protected, with provision for MCB double pole as incomer and SP MCBs as outgoing with tinned copper bus bar, neutral link, earth link and connecting up complete all as specified and as directed. Note : Incoming and Outgoing MCB measured separately relevent items.

S&F MCB DB SPN 4 way, double door, powder coated, 240 volts, AC, 50Hz, IP 43 protected, with provision for MCB double pole as incomer and SP MCBs as outgoing with tinned copper bus bar, neutral link, earth link and connecting up complete all as specified and as directed. Note : Incoming and Outgoing MCB measured separately relevent items.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) all as specified and as directed.

Supply and fix wall mounted fan of 450 mm sweep 230 V ,50 Hz, including clamps, nuts and bolts etc. all as specified and as directed.

Exhaust fan, heavy duty, 300mm sweep, 1370 RPM, with louvers, metal body conforming to IS-2312-1967, AC single phase, 240 Volts, 50 Hz and connecting including provision of two way PVC connectors, 1 sqmm flexible three core multistranded copper conductor cable from ceiling rose or connector to fan including earthing and fixing arrangements like making hole in wall and finishing to shape to match adjoining surface and writing MES No.20mm height with synthetic enamel paint black complete all as specified and as directed.

S&F Sheet metal enclosure (DB) Single Pole and neutral 4 way, 240 Volt with 200 Amps rated bus bar double door complete all accessories complete all as specified.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5m depth and getting out soft / loose soil for laying cables / pipes / erection of poles etc all as specified

Removing excavated material (soil) not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point all as directed.

Returning filling in soil including spreading levelling watering well ramming in layers not exceeding 25 cm each all as specified and directed.

Supply and laying of common burnt clay building bricks, sub class B of size 230x115x75mm for cable protection all as specified as directed

Laying of fine sieved excavated soil including spreading, levelling, punning for cushioning of cable all as specified and as directed.

Supply & Lay cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor extruded PVC Type ST2 Outer sheathed, 650/1100V as per IS 7098 (part-I) of size 2 core, 16sqmm all as specified as directed. Note:- (i) Lugs and glands are deemed to be included in the rate quoted for laying of cable and to be used properly where ever required while connecting cables to the board. (ii) Earth work such excavation, refilling, etc. shall be measured separately under relevant items.

Supply & lay GI pipe light grade including necessary fitting of 25mm bore complete all as specified and as directed.

Shri Varaghaa

M/s Omm Muruga Enterprises

S K ENTERPRISES