Unit Rate for Installation of 15 Hp Submericble Moter pump set with M.S.Tubewell assembly at Nagar Nigam Area

Transportation, Erection, Dismantling of Rig Machine and its T&P

Transportation, Erection, Dismantling of Compressor 250/350 PSI

Transportation, Erection, Dismantling of 2 Cusec/3cusec O.P Unit and Yield test

Supply of Tubewell Assembly M.S.Tubewell assembly with all required parts like plain pipe, Slotted pipe (as required upto 50% of plain pipes) rings, well cap bail plug, clamp reducer, central guide, suport structure etc. as required & as per typed design complete in all respect. (Note- Axial Length of Reducer without Ring shall be measured with casing pipe)

200 mm dia M.S. Pipe 7.1 thikness

150 mm dia M.S. Plain/slotted 7.1 thikness

PEA-GRAVEL (As per IS:4097)

1.65 mm to 4.50 mm size Pea gravel of Lalkuwan quarry duly screened, washed and properly stacked at site for Tubewell

Drilling of bore by rig machine As Per IS :2800(Part I & II):

Drilling of bore by 500 mm dia bit GL to 100 mt. BGL.

Drilling of bore by 500 mm dia bit GL to 101 mt. BGL. To 120 mt. BGL.

Lowering of tube well assembly With M.S. rings, Bail Plug, Reducer Including welding:

Lowering of 200 mm dia M.S. Housing pipe from GL to 48 m.BGL

Lowering of 150 mm dia M.S. Plain/slotted pipe 49 m. BGL to 100 m. BGL

Lowering of 150 mm dia M.S. Plain/slotted pipe 101 m. BGL to 110 m. BGL

Development of tube well by 250 PSI air compressor and 3 cusec O.P. Unit to yield sand free discharge.

Development and testing of tube well by Air Compressor.

Development and testing of tube Well O.P.Unit to yield sand free Discharge.

Chemical and Bacteriological

test (Analysis of water sample)

Bentonite (per bag 40kg)

NEW PUMPING PLANT & VOLTAGE STABILIZER

Supply, Installation, testing and Commissioning of 900 lpm , 45 mtr Head Pumping Plant including 15 Hp Submserible Moter Pump set (CRI/KSB) 20 Hp Panal (Bantex/ L&T Make) 24 met coloumn pipe (5.4mm thikness), NRV,CI D/F Bend 90 deg., CI A/F Tee, D/F pipe (1.5 met long-2 Nos and 1 met long- 1 No ), Painting, wiring of pump house (with internal & external electrification), etc.

SITC of 100 mm dia size metal sheeted sluice valves

SITC of Star Delta starter for above pumpset with RS 485 Port-400V Class for above pumpset

SITC of 25 kva servo voltage stabilizer for above pumset

Pressure Gauge

Supply, Fabrication and fitting of MS Canopy suitable for fiiting of Starter Panel, Doser and Stabilizer with proper Base of RCC lift upto 3 feet and fitted with exhaust fan,protected from flood and rain.

S/L of 100mm Ø M.S pipe B-Class up to 15mtr. and making Inter connection of this new line with 15 Hp. Tubewell side and exisiting old pipe line side i/e all T&P C.I.D Joint and labour charge etc. complete.

Add GST 18%

Please Enable Macros to View BoQ information