SPECIAL REPAIR TO BUILDING NO P 51 OF ASC SUB DEPOT AND PROVN OF TOILET FACILITY NEAR NAVDEEP DWAR GATE AT COD KANPUR

Amount

Dismantling of asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings including ridges complete all as specified and directed.

Dismantling of unframed timber work scantlings 40 Sqcm and over in section, in any position complete all as specified and directed.

M&L Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe 410 W (Gde-E-250) quality A complete all as specified and directed.

S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes with riveted, bolted or welded attachment etc incl mild steel screw bolts (machine made) with hexagonal or square heads at one end & washers as reqd conforming to Fe 410W .Gde-E-250, quality-A. complete all as specified and directed.

S & F regular modified Polyester colour coated galvanized steel rib profile sheet (TCT) 0.50mm thick E42 (inclusive of protective coating ) overall width 1060mm and total mass coating of 150 Gms/Sqm on both sides as per IS-14246:95 (JIS:3312 polyester coating 30-40 micron) as in roof etc fixed etc fixed to iron /wooden members with self drilling zinkallum coated metal screws having cap with rubber washers more than 3.00sqm patches as required in shapes complete all as specified and directed. Make: (a) Lloyd Insulation (b) Tata bluescope steel building solutions Ltd. (c) Prestar Infrastructure Project Ltd (d) Colour Roof India Ltd.(CRIL) (e) M/s Matco Roof PvtLltd. (f) Ispat Industries Ltd (g) Everest Industries

S&F plain regular modified Polyester colour coated galvanized steel rib profile sheet (TCT) 0.50mm thick having tensile strength of 550 Mpa as in ridge, valley gurtter, drip and straight flashing fixed with self tapping screws of reqd size and dia with head having matching colour PVC cap / painted as of sheet total mass coating 150Gms/Sqm (both side) in roofing complete all as specified and directed. Make: (a) Lloyd Insulation (b) Tata bluescope steel building solutions Ltd. (c) Prestar Infrastructure Project Ltd (d) Colour Roof India Ltd.(CRIL) (e) M/s Matco Roof PvtLltd. (f) Ispat Industries Ltd (g) Everest Industries

S&F wind ties for roof including securing bolts as directed, including all necessary drilling, bolting or riveting, etc. and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

Demolition of unreinforced cement concrete of any description and in position not otherwise specifically provided for complete all as specified and directed.

Demolition of plain cement concrete in ground floor and pavings not exc 15cm thickness below or above ground level complete all as specified and directed.

Demolition of brick work of any description and in any position built in cement mortar including quoins arches and pillars complete all as specified and directed.

M&L for brick work with sub class ‘B’ bricks straight or curved on plan exc 6 mtr mean radius built in cement mortar 1:4 complete all as specified and directed.

All as per item No. 11 here in before but except bricks complete all as specified and directed.

M&L for providing plain cement concrete 1:2:4, type B-0 (using 12.5 mm graded stone aggregate) as in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like with weathering, slightly rounded for chamfered angles and throating including necessary formwork complete all as specified and directed.

Taking down cement plaster on bricks including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M&L 15mm thick rendering in cement mortar 1:6 on brick or concrete surfaces of wall finished fair and even complete all as specified and directed.

M&L 15mm thick rendering in cement mortar 1:4 on brick or concrete surfaces mixed with water proofing compound as per manufacturer's instructions, surfaces finished fair and even complete all as specified and directed.Note:- WPC measured and paid separately.

M&L 15mm thick rendering in cement mortar 1:4 on brick or concrete surfaces of wall finished fair and even complete all as specified and directed.

Supply only integral water proofing compound (ISI Marked) complete all as specified and directed.

M&L 75 mm thick Cement concrete type 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate) as in sub base complete all as specified and directed.

M&L for 18-20mm thick Machine cut kota stone slab flooring over 15 mm thick screed bed in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for 18-20mm thick Machine cut kota stone slab as in riser of steps, skirting, dado and pillar laid over 10mm thick rendering of cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block of any shape and size confirming to IS 15658-2006 of 60mm thick, M-35 grade, set and jointed over 25mm thick sand cushoning complete all as specified and directed.

M&L Providing precast reinforced cement concrete 1:2:4, Type B-1 (Using 20mm graded stone aggregate) as in manhole cover slabs, kerb stone, cover slab (for drain) & RCC lintel etc set in CM (1:4) including necessary form work complete all as specified and directed. Note :- Reinforcement shall be measured and paid separately under appropriate items of the shcedule)

M&L for PCC 1:2:4, type B-0 (using 12.5mm graded stone aggregate) as in roof kerb, benching/ padding over roof surface including chamfered on eges etc complete all as specified and directed.

M&L for cement concrete 1:2:4, type B-1 (using 20mm graded aggregates) as in surface channels and drains etc complete all as specified and directed.

M&L 75 mm thick PCC 1:3:6, type C-1 (using 20 mm graded stone aggregate) as in plinth protection and paving laid in alternate bays finished finish even and smooth wihtout using extra cement complete all as specified and directed.

M&L for preparation of new steel surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.

M&L for preparation of new steel surfaces not exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.

M&L for preparation of old wooden surfaces width or girth exc 10 cm and applying two coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying three coats of white wash as on wall surfaces complete all as specified and directed

M&L for preparation of new plastered surfaces and applying two coat of cement based paint of approved shade on plastered surfaces of wall complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Demolition of RCC roof slab/facia/chajjas/cooking slab and like (reinforcement cut as required to facilitate demolition) complete all directed.

Blank

Excavation in trenches in soft/loose soil not exc 1.5 mtr in width and not exc 1.5 mtr in depth and getting out all as required for laying of cables for foundation, filling of poles or stays, shafts, wells, cesspits, laying pipes, drains or manholes, pier holes and for rerouting of cables etc including trimming sides and forming bottom surfaces to required levels/slopes etc complete all as specified and directed.

All as per item No-35 but depth exc 1.5 mtr but not exc 3.00 mtr complete all as specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25cm each complete all as specified and directed.

Removing excavated material to a distance not exceeding 50 meters and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed.

Surface excavation in soft / loose soil, not exceeding 30 cm deep and averaging 15 cm deep and getting out complete all as specified and directed.

Formwork to sides of column footing / plinth beam etc, rough finished surfaces of concrete flat complete all as specified and directed.

Formwork to sides of columns, rough finished surfaces of concrete square or rectangular complete all as specified and directed.

Formwork to sides of beam/lintel bend and similar structure for flat rough finished surfaces complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

`Formwork to edges of slabs of floor, roofs, cill and similar work etc, and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and directed.

M&L RCC M-25 design mix as in foundations, including rafts, footings, foundation beams; plinth beams; base for columns, etc basement slabs, undereamed piles and mass concrete complete all as specified and directed.

M&L RCC M-25 design mix as in coloums, pillars, piers, posts and struts complete all as specified and directed.

M&L RCC M-25 design mix as in beams, lintel band and gable beams complete all as specified and directed.

M&L RCC M-25 design mix as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for mild steel TMT bars 10 mm dia & over, cut to length, bent to shape required including cranking, bending, spirally hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia complete all as specified and directed.

-All as per item No 49 above but 6mm to 8mm dia bars

All as per item No 49 above but above 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders complete all as specified and directed.

M&L for brick work with fly ash old size bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed.

M&L for brickwork with fly ash old size bricks, straight or curved on plan exc 6m mean radius in half brick thick wall built in CM 1:4 complete all as specified and directed.

M&L for 40 mm thick Damp proof course in cement concrete 1:2:4, type B-0, including necessary form work with WPC as per manufacturer instruction by weight of cement complete all as specified and directed.

M&L for hardcore of gauge not exceeding 63 mm of broken stone or boulders, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

BLANK

M&L 25mm thick PCC 1:2:4, type B-0, (using 12.5mm graded stone aggregate) as in floor to receive tiles complete all as specified and directed.

M&L for Non skid joint free ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the suraface over 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for glazed ceramic tiles coloured, joint free in vertical surface 300X 450X 7mm thick mm thick as on walls over and incl 10mm thick rendering in cement mortar (1:4) and jointing in neet slurry and pointing in coloured cement to match the inside of tiles all complete as specified and directed.

M&L for Plain cement concrete (1:2:4) type B-2 using 40 mm graded stone aggregate in foundation, filling, mass concrete complete all as specified and directed.

S&F CI cowl 100mm dia complete as specified and directed.

M&L for15mm thick rendering in cement mortar 1:4 on top of roof slab surfaces in green stage, mixed with water proofing compound as per manufacturer's instructions, surfaces finished even and smooth complete all as specified and directed. Note:- WPC measured and paid separately.

M&L for Plain cement concrete (1:4:8) type D-2 using 40 mm graded stone aggregate in foundation, filling, mass concrete complete all as specified and directed.

M&L for 10mm thick cement plaster on ceiling in CM 1:3 finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying three coats of white wash as on wall surfaces complete all as specified and directed

M&L for preparation of new plastered surfaces and applying three coats of white wash as on ceiling surfaces complete all as specified.

M&L for preparation of new plastered surfaces and applying two coat of cement based paint of approved shade on plastered surfaces of wall complete all as specified and directed.

M&L for water proofing treatment to roof slab with APP modified polymeric membrane thickness not less than 3 mm, plain membrane (weight of membrane not less than 3.50 Kg +/- 5% per Sqm) and weight of centre core polyster mat shall be 160 gram +/- 15% per Sqm and lower side finished with 10 to 15 micron thermo fusible polyethylene complete all as specified and directed with following courses of descriptions below :- Make of membrane shall be SIKA/Super Thermolay APP (STP) / IWL as approved by GE

(a) The surface of roof, parapet and gutters and drains mouth etc over which waterproofing treatment is to be applied shall be thoroughly cleaned of all foreign matter, moss dust etc by wire-brushing and dusting. For cast iron/PVC drains outlets a grove shall be cut around to tuck in the treatment. Concrete angles-fillets provided at junctions between roofs and verticals faces of walls (parapet and other walls) around obstacles such as pipe, chimney stacks etc and other similar situation to ease up about corners..

(b) On the prepared surface one coat of Solvent based bituminous primer (Sika® WP shield Primer or other techno commercially Equivalent make of STP/IWL ) shall be applied @ 0.35 to 0.50 Kg/sqm till the surface is properly impregnated. The time delay of laying of membrane after application of primer shall be as per manufacturer instructions

(c) Laying of polymeric waterproofing membrane and bonded completely to the substrate & the overlaps are then sealed /fused by flame torch as per manufacturer instructions.

(d) The overlaps shall be of minimum 4 Inch (100 mm) side lap and 150mm at end, sealed by the flame-torch.

(e) Applying two coats of aluminium paint over a coat of primer on APP Membrane for non accessible terrace only (M&L for two coats of aluminium paint over a coat of primer shall be measured and paid seperately under relevant item).

M&L for preparation of new surfaces over 10cm in width or girth and applying two coats of aluminium paint over APP membrane complete all as specified and directed.

S&F factory made steel tubular ventilator with side hung shutter with hinges steel peg stay including 4mm frosted / pin headed sheet glass panes complete all as per HQ CELZ Lucknow Drg No. LZ/C-TD/130 sheet 1/4 to 4/4 complete all as specified and directed.

M&L solid PVC frame (single rebated) of size 60 mmx 30 mm made out of solid pvc foam with homogenous fine cellular structure having smmoth outer integral skin with suitable metal stifner and fixed with 100x8 sheet metal CSK screws complete all as specified and directed.

M&L factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded but Single Side Prelam PVC sheet used instead of Plain colour PVC sheet and stile & rails having one side feathered edge and on other side 10mm 90 degree bent edge 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement complete as per specification & drawing.

S&F PVC handle 150mm size complete all as specified and directed. Make Prayag and equivalent.

S&F PVC but hinges 100mm size complete all as specified and directed. Make Prayag and equivalent.

S&F PVC tower bolt 150mm size complete all as specified and directed. Make Prayag and equivalent.

S&F Vitreous China Squatting pan, `Orrisa` pattern size 580x440 mm (ISI marked) white with integral foot rest with suitable CP Trap including necessary concrete work and finished to match the surface complete all as specified and directed.

S&F vitreous china urinal bowl type flat back size (465 x 355 x 265) mm white grating and union for discharge pipe, including providing and fixing plugs, bedding urinal against wall in CM (1:2) including 60mm brass screws complete all as specified and directed.

S & F in repairs vitreous china wash hand basin, white flat/angle back size 550 x 400 mm complete incl necessary cutting holes and pinning in ends of angle iron brackets, 75 cm long and 25 mm bore PVC waste pipe and 32 mm dia CP waste coupling complete all as specified

S&F 600 mm x 450 mm bevelled edge mirror, mounted on 6 mm thick plywood and fitted to wooden plugs with CP brass screws and cup screws complete all as specified and directed.

S&F 10 litre PVC valveless, syphonic action type flushing cistern low level with inlet valve, float and handle including brackets and PVC outlet suitable for complete all as specified and directed.

S&F chromium plated soap dish, any type, fixed to plugs with brass screws complete all as specified and directed.

S&F bib tap CP, fancy type short body with capstan head 15mm bore including flange complete all as specified .

S&F angular stop cock 15mm bore, chromium plated, screwed down high pressure with capstan head and flange complete all as specified and directed.

S&F pillar taps fency type (ISI marked) cast copper alloy CP with capstan head, screwed down high pressure with or without lettered HOT or COLD with long screwed shanks and fly nut screwed for iron pipe of 15mm bore complete all as specified and directed.

S&F brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges incl brackets complete all as specified and directed.

S&F stainless steel gratings suitable for 75 mm floor trap complete all as specified and as directed.

S&F PVC waste pipe 32/40mm dia suitable for WHB/Urinal/Sink etc complete all as specified and directed.

S&F PVC connection 15mm dia and 300mm long with synthetic metal nut complete all as specified and directed.

S&F 15 mm bore galvanized steel tubes 'medium grade' with all fittings laid concealed/surface in walls complete all as specified and directed.

S&F 20 mm bore galvanized steel tubes 'medium grade' with all fittings laid in walls complete all as specified and directed.

S&F in repair 100 mm dia CI 'P' or 'S' trap complete all as specified and directed.

S&F in repair CI bend 100 mm dia (any radius) diminishing pieces etc complete all as specified and directed.

S&F cast iron floor trap 100 mm dia out let including jointing to waste pipe fixed in cement concrete 1:2:4 complete all as specified and directed.

S&F Salt glazed stoneware gully traps square type 'P' and size of gully trap 150 x 150 mm complete all as specified and directed.

S&F 75 mm bore cast iron soil, waste and vent pipes (spun pipes) in any length with or without ears, with cement joints, laid in floor/trenches or in floors complete all as specified and directed.

S&F 100 mm bore cast iron soil waste & vent pipes (spun pipes) in any length with or without ears, with cement joints, laid in floor/trenches complete all as specified and directed.

S&F 100 mm bore cast iron soil waste & vent sand cast pipe in any length with or without ears, with cement joints, fixed on walls with MS flat iron clamps size 50 x 6mm and 16mm dia round bar stay of required shape and size inclduing drilling holes and embedded in CM 1:3 surface finished complete all as specified and directed.

S&F cast iron tee for 110 mm bore pipe complete all as specified and directed.

S&F 100mm bore cast iron vent cowl complete all as specified and directed.

Providing precast cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate in win- dow or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin). corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throat- ing etc. and setting in mortar complete with joints to match.

Excavation over areas not exc 1.5m depth for foundations etc., and getting out in any type of soil for septic tank etc complete all as specified and directed.

Excavation over areas exc 1.5m depth but not exc 3m in depth for foundation etc., and getting out in any type of soil for septic tank etc complete all as specified and directed.

M&L for plain cement concrete 1:3:6, type C-2 (using 40 nmm graded stone aggregate) as in concrete bed to reinforced concrete pipes of 150 mm bore including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed and shown on draings. Note :- Reinforced concrete pipes shall be measured and paid separately.

M&L Reinforced concrete pipes of 150 mm bore (internal dia) class NP-3, jointed complete with collars and laid in trenches on concrete bed to required slope, jointed and tested complete all as specified and directed. Note :- Excavation/Earth work and concrete bed shall be measured and paid separately under appropriate items)

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms, moulds mitered/stopped ends etc complete all as specified and directed.

S&F CI Branch pipes 100m dia bore (equal or unequal) with parellel branches complete all as specified and directed.

M&L for soakage well (3.0 M dia x 4.5 M effective depth) excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M-30 concrete made of Brick masonary in CM, RCC cover slab in M-30/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size complete all as specified and directed.

EnM Schedule

M&L for point wiring with PVC (FRLS) insulated and unsheathed cable 1.5 Sqmm (Nominal area) multi-stranded copper conductor single core with proper colour coding including PVC conduit medium grade of 25 mm dia concealed in walls and surface on ceiling with and including pressed steel concealed terminal boxes of appropriate size and top cover 3 mm thick of plastic laminated sheet ISI marked of desired colour of make : Hylam, painting terminal boxes inside and outside with a coat red oxidé primer complete with all accessories with and including 1.5 Sqmm PVC insulated and unsheathed green colour multi-stranded copper conductor cable to common earth and connected to earth dolly complete all as specified and directed for the following points:- Note: Cutting chases in walls required for concealed conduit wiring shall be finished with cement mortar 1:4 and, surface shall be matched with existing surface by using putty, plaster of paris etc. and applying finishing coat of existing treatment shall be deemed to be included in the unit rate quoted by the contractor.

One light / fan / bell / exhaust fan point controlled by one switch.

One 3 Pin socket outlet 5 Amps on Independent board.

One 3 Pin socket outlet 5 Amps on same board.

S&F switch piano flush type 5/6 Amps single pole one way complete all as specified and directed.

S&F socket outlet flush type, 5 pin 6 Amps, 240 Volts complete all as specified and directed.

S&F ceiling rose surface bakelite of three terminals 240 Volts complete all as specified and directed.

S & F of lamp holder insulated body with back plate suitable for batten / conduit fitting complete all as specified and directed.

M&L for submain wiring with two single core 4 Sqmm copper conductor PVC insulated and unsheathed multi-stranded cable (FRLS) including PVC conduit medium grade of 25 mm dia, concealed in walls for sub main connection and 4 Sqmm PVC insulated and unsheathed multi-stranded green colour copper conductor cable (FRLS) as an earth wire to common earth and connected to earth dolly including taking down old one complete all as specified and directed.

Blank

S&F in replacement of LED wall security light 25 watt, pressure die- cost aluminium IP-66 road way luminaries with high power LED as light source with acrylic cover with suitable size bracket fixed with clamps, nut bolt, washer and provision of three core flexible of 1.50 Sqmm copper conductor cable from ceiling rose to light fitting complete all as directed Make: Havells cat part no SL25WLED 757SASYTOPCMP/ WIPRO cat part no LR02-291-xxx-57-xx/ C&S cat part no INDUS-E/25W LTESSE25WLED/Bajaj cat part no BCLST25WLEDIV2 or equivalent in Philips/CG.

S & F in replacement of LED mirror light fitting 10/11watt, 6500K, IP65, with efficient heat dissipation & intigrated electronic driver complete including connecting electrically with 1.5 sqmm 3 core wire all as specified and directed. Make : Havells Cat part no LUMILINEPLUSBS10 WLED865SPCSS / Wipro LL20-111-XXX-65NE3 /Bajaj Cat part no BCLSB 10NW/C&S cat part no NAKSHATRA/10W LTTB2F10WLED/W or equivalent in Philips/CG as approved by GE.

S & F sheet metal enclosure double door factory made MCB distribution board Single pole and neutral 240 Volts, 4 way with neutral and earth bus bar having IP-43 protection and double door metal concealed/flush to wall surface including making connections with thimbles as required complete all as specified and directed. Make : Schneider / L & T / Legrand/C&S/ Indo Asian/Havells/ABB

M&L for MCB single pole, 240 volts 6 to 32 amps, with rupturing capacity 10 KA using thimbles of required size. Make : Schneider / L & T / Legrand/Indo Asian/C&S/Havells/ABB

M&L MCB SPN, 240 volts 32 to 63 amps,with rupturing capacity 10 KA using thimbles of required size. Make : Schneider / L & T / Legrand/Indo Asian/C&S/Havells/ABB

M & L for earthing with galvanised steel earth plate electrode 600 x 600 x 6mm thick buried directly in the ground (earth pit not less than 2.25 metre deep below normal ground level) with top edge of plate not less than 1.5 metre below the ground level, connected to galvanised earth lead wire 4 mm dia by means of nuts, bolts, check nuts and washers of galvanised or steel all as specified or shown in electrical plate of SSR (Part-l) including necessary excavation, earth work, GI pipe 15 mm dia light grade for protection of galvanised iron earthing wire, GI pipe 20 mm dia light grade watering pipe etc. including concrete chamber of PCC 1:2:4 type B-2 (using 40mm graded stone aggregate), copping in PCC 1:3:6 type C-1 (using 20mm graded stone aggregate), internal surface of concrete chamber shall be plastered with 12 mm thick cement mortar 1:4 and 50 mm thick RCC cover in pre-cast cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) duly reinforced with 8 mm dia TMT bar @ 80 mm c/c both ways and charcoal dust, common salt etc. including testing after completion complete all as specified and directed.

M&L for sand filling and cushioning to underground cables, 8 cm thick before laying the cable and 15 cm thick after laying, stretching and testing the cable and for under floor complete all as specified and directed.

Supply and laying sub class 'B' bricks old size 230mm x 115mm 75mm complete all as specified and directed.

M&L for drilling manually in any type of soil under road / hard standing / culvert / nala of suitable bore for protection pipe upto 50 mm bore complete all as specified and as directed. Note: Depth of bore shall not be more than 1 Mtr from original ground level.

M&L for GI tubing 'light grade' 40mm bore with fittings laid for protection of cable under road crossing fixed to walls or pole complete all as specified and directed.

All as per srl item No. 125 above but 20mm bore complete all as specified and directed. Note : (clamps for fixing pipe, nuts, bolts washers shall be measured and paid separately )

M&L for cement concrete 1:4:8, type D-2 (using 40mm graded stone aggregate) for foundation filling of poles as mass concrete complete all as specified and directed.

M&L for cement concrete 1:3:6, type C-2 (using 40mm graded stone aggregate) for foundation filling of stays complete all as specified and directed.

M&L for cement concrete 1:2:4, type B-2 (using 40mm graded stone aggregate) for foundation filling of stays complete all as specified and directed.

Supply and laying XLPE insulated heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 25 Sqmm, 4 core in trenches or fixing to wall/pole or passing through pipe including making good disturbed wall surfaces/ flooring/tilling to match with existing specification complete all as specified and directed.

All as per item No.130 above but cable of size 16 Sqmm, 4 core complete all as specified and directed.

All as per item No.130 above but cable of size 16 Sqmm, 2 core complete all as specified and directed.

All as per item No.130 above but cable of size 10 Sqmm, 2 core complete all as specified and directed.

Supply, erecting and installation of steel tubular swaged pole (9 metres long) complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-22 duly painted with two coat of black bituminous paint through out, internally and externally up to planning depth and painting remaining portion of pole with two coat of aluminium paint to the entire exposed surfaces over one coat of red oxide primer making/painting three Nos circular strips each of 30 cm wide with one yellow and 02 Nos black colour strip synthetic enamel paint and marking pole number with black paint complete all as specified and directed. Note : Excavation, earth work, PCC work shall be measured and paid separately under respective items)

S&F of Bus bar chamber with MCB SP 6 Amps-(01 No.), outdoor type of size 400 x 380 x 190 mm made out of 3mm thick MS sheet with suitable aluminium bus bar three phase & neutral step design fixed on insulators and fixing on steel pole with proper clamps, nuts , bolts & washers of required size and making connection of LT cables with thimbles, glands and making good the disturbed surfaces including water proof PVC sticker like danger mark complete all as specified and directed.

Supply and fix in replacement of High power LED street light 60/65 Watt IP 66 Energy saving & environmental friendly long life Versatile pressure die-cast aluminium roadway luminaire with high power LEDs as light source and electronic driver fixed on pole/wall as directed incl electric connection with 1.5 Sqmm multistranded twin core alum cable PVC insulated from junction box to street light by laying in bracket/ pipe/ pole complete all as spfd. Make : Havells cat part no ENDURAPEARLNEOSL60WLED757PASYTOPC / Bajaj cat part no BRTFG 60W LED V3 / Wipro Cat part No LR02-671-XXX-57-G2/ C&S cat part no LTESST60WLED/LS /Philips cat part no BRP062 LED 68 CW SLC S1 PSU/CG as approved by GE..

Supply and laying to wall or poles or fixing or passing through pipe, of 1100 volts grade heavy duty cable with XLPE insulated aluminium multistranded conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or strip and overall PVC sheathed 6 sq. mm nominal cross section 2 core Including making good all distributed wall / flooring/tilling surfaces to match with existing specification complete all as specified and directed.

Supply & Laying, jointing and leakage testing GI tubing medium grade 20mm dia bore with all fittings such as bend, tee, elbow, union, reducer etc, laid in trenches/floor/roofs and making good the disturbed surface to match with existing surface as (PCC work in 1:2:4 using 20 mm graded stone aggregate/ plastering in CM 1:4 and applying finishing coat of existing treatment) complete all as specified and as directed Make: Tata/Jindal/Prakash Surya

S & F 20 mm dia stop valve, gun metal iron, screwed down, high pressure with crutch or butterfly handle, screwed for iron pipe or for ferrule ISI marked complete .

Cutting existing GI 20mm bore pipe in position for making branch connection including excavation & earth work complete all as specified and as directed.

ASIA BUILDER

M/S SDS Construction Co.

M/s DKS Engineering Works