Repair/Maint and periodical services to existing Comdt Residence at Bn HQ Kiphire of AR Bn at Kiphire (Bldg No. AR/P/Kiphire/05).

Amount

SCHEDULE ‘A’ PART-I (REPAIR/MAINT AND PERIODIAL SERVICES)

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Material and labour 15 mm cement plaster on the rough side of single or half brick wall of mix : 1:6 (1 cement: 6 fine sand) on internal wall.

Material and labour 20 mm cement plaster of mix : : 1:6 (1 cement: 6 fine sand)

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade : Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface

Distempering with 1st quality acrylic distemper (ready made) having VOC content less than 50 gm per ltr. of approved manufacturer and of required shade and colour complete. as per manufacturer's : One or more coats on old work. specification.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work

Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: G.S. Sheet.

Fixing Only pre painted CGI Sheet 0.63 mm thick (Pre painted CGI Sheet supplied by Dept)

Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete : 0.63 mm thick with zinc coating not less than 275 gm/m²

Renewal of old putty of glass panes (length)

Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm)

Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked, with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately) :18 mm thick

Varnishing with varnish of approved brand and manufacture: One or more coats with copal varnish.

Supply and Fixing of U-PVC pipes (working pressure 4 kg / cm²) Single socketed pipe110 mm dia.

C.P. Brass Centre Hole Basin Mixer With Cast Spout.

M/s. Janki Enterprises

Aien Meren Enterprises