Improvement of CC Drain and Road and drilling of 2 nos of bore well in ward no 18 Roza in Kalaburagi city Under KKRDB for the Year 2024-25 (Workcode - KLB2412123669)

Improvement of CC Drain and Road and drilling of 2 nos of bore well in ward no 18 Roza in Kalaburagi city Under KKRDB for the Year 2024-25 (Workcode - KLB2412123669)

Dismantling of existing structures like culverts, bridges, retaining

walls and other structure comprising of masonry, cement concrete,

wood work, steel work, including T&P and scaffolding wherever

Earth work excavation by manual means for drains, canals, waste weir, draft,

approach channels, key trenches, foundation of Buildings & bridges and such

simillar works in all kinds of soils, as per dr...

Providing and laying in position Cement Concrete for levelling course for

all works in foundation. The granite/trap/basalt crushed graded coarse

aggregates and fine aggregates as per relevant IS Codes...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement

including cost of all materials, machinery, labour, cleaning, straightening,

cutting, bending, hooking, laping/welding joints, tyin...

Providing and laying in position Cement Concrete for all Sub structures of

building, Irrigation works, Sub structure works of bridges, Drain works &

other parallel works from 0.50m to 3.50 m height. T...

Addendum I-Percentage Additionalities for Formwork,

Centering & Scaffolding for Cement Concrete Drain Walls add 35%

Earth work excavation by manual means for drains, canals, waste weir, draft,

approach channels, key trenches, foundation of Buildings & bridges and such

simillar works in all kinds of soils, as per dr...

Providing, laying, spreading and compacting graded stone

aggregate to wet mix macadam specification including premixing

the Material with water at OMC in mechanical mix plant carriage

of mixed Materia...

Providing and laying 80mm thick factory made precast M -30

grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS

15658 for Commercial Traffic Axle load repetitions upto 10MSA

& for Residential ...

Repairs to Machinehole for different depths including removal of debris,

levelling the brick masonry, construction of brick masonry upto Ground

level, providing CC coping alround the MH cover, plaster...

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig

of capacity 300 PSIG & above 1100 CMF & above in all strata including

over burdern upto 20 m. Fixing of casing pipes, collars and ...

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig

of capacity 300 PSIG & above 1100 CMF & above in all strata including

over burdern upto 20 m. Fixing of casing pipes, collars and ...

Supply of ISI mark 175mm nominal bore,plain and steel casing pipe

grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and

latest ammendments, electrical resistance welded steel tubes, m...

Providing and fixing MS casing collars as per IS 1239 (part-II) 1982 with

all latest amendments if any for any dia. The thickness of plate used for

covering one end shall be 3mm (minimum). The dimensi...

Providing and laying at site of work MS casing caps as per IS 1239 (part-

II) 1982 with all latest amendments if any for any dia. The thickness

of plate used for covering one end shall be 3mm (minimum...

Providing PVC ringtite pipes conforming to IS 4985:2000 with latest

amendments and conveying to worksite, rolling and lowering into

trenches, laying true to line and level and perfect linking at joint...

Providing Submersible Pump Set of 150mm dia suitable for bore well and

confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt

Motor as per specifications, to work site as per necessary am...

Supply and delivery at site Brand new best make PVC insulated cable of

Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990

with ISI Mark and as per its latest amendments. 1x3x4 S...

Supply and delivery at site of brand new best make pressure gauge

bourdon type as per IS 778/1984 with ISI Mark and as per its latest

amendments. Size 100 mm

Earthing: Providing and fixing and wiring earth electrode for grounding

circuits IC cutouts and other equipments on the meter board in the pit.

The pits should be filled up with equal proportion of sa...

Supply and delivery at site of brand new best make non-return valve as

per IS 778/1984 with ISI Mark and as per its latest amendments Size 65 mm

Providing, laying and jointing HDPE pipes of specified grade and

conforming to IS 4984-2016 with latest ammendments and conveying

to work site including loading and unloading at both destinations and

Providing and erecting direction and place identification retroreflectorised

sign as per IRC:67:2022 made of high intensity

grade sheeting vide clause 801.3, fixed over aluminium

sheeting, 2 mm thick ...