Construction of 60 KL Sump

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD /304 MORTH-For sump Fdn. Up to 3m Depth

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH-Suction pit depth 3m-6m

PCC (1:4:8) using 40 mm HBG metal including cost and conveyance of all materials and labour charges etc., complete as per standard specifications for foundation levelling course

RCC M30 Grade including cost and conveyence of all materials and labour charges but excluding cost of steel and its fabrication charges etc., complete as per standard specifications for Floor slab

RCC M30 Grade including cost and conveyence of all materials and labour charges but excluding cost of steel and its fabrication charges etc., complete as per standard specifications for suction Pit

RCC M30 Grade including cost and conveyence of all materials and labour charges but excluding cost of steel and its fabrication charges etc., complete as per standard specifications for Side wall 150 mm Thick

RCC M30 Grade including cost and conveyence of all materials and labour charges but excluding cost of steel and its fabrication charges etc., complete as per standard specifications for Haunch portion

RCC M30 Grade including cost and conveyence of all materials and labour charges but excluding cost of steel and its fabrication charges etc., complete as per standard specifications for Top Slab-150 mm thick

Acco-proof Plastering with CM(1:3) prop. 20 mm thick with 2% acco-proof powder including cost and conveyance of all materials and labour charges etc., complete as per standard specifications for sump well -Bottom of the sump, Side walls inside & Top dome ceiling

Plastering with CM(1:3) prop. 12 mm thick including cost and conveyance of all materials and labour charges etc., complete as per standard specifications for sump well- Side walls Outside & Top slab

Painting to new walls with 2 coats of plastic emulsion paint on primary coat of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges, overhead charges & Contractors profit etc., complete but excluding VAT and seigorage charges for finished item of work as per APSS No.911 for external walls- Side wall Outside above GL & Top slab

Supplying, fitting and placing HYSD bar reinforcement in foundation complete as per drawings and technical specifications for Bars below 36 mm dia including over laps and wastage, where they are not welded

Provision for RCC central phenial(0.3mx0.3m) with fly proof mesh as per standard specifications

Supplying & fixing 602 x 602 mm CI man hole frame and cover (light weight) 30 Kgs (TBSP-B.II-10)

Provision for RCC inside ladder as per the standard specifications

Providing of stainless Steel railing including cost and conveyance of all materials and labour charges etc., complete

Supply, delivery ,transporation, errection, testing and commisioning of 10.00 HP open well submersible motor pump sets with efficiency not less than 60% of Kirlosker/Crompton /Texmo/CRI/KSB make with water resistant dynamically balanced impeller with stainless steel sleeves pump coupling and pivot with squirrel cage inductor motor of 3phase 415V 50HZ AC supply heavy copper windings with with water proof insulation and high pressure strength not to be efected by chemicals in water with suitable bronze bearings errected with h-type clamps odutable size and strength including cost of all materilas, transportation and all labour chrages as per the directions of the Engineer-in-charge

Supply and Transportation of control panel for three phase submersible motors for 10HP @ 415V 50Hz operating fitted with supply and fixing of Direct - on - Line LTLK /BCH/ SIEMENS / CROMPTON make, 0-500V Volt meter and 0-30A Ammeter, Indication lamps, selector switches, CTS, 32A TP MCB, Single phase preventor, suitable contactor to with stand low voltage pick up and high voltage resistant, with ISI marked capacitors assembled with ISI mark contactors and fitted with Legrand make ISI mark MCB etc., complete

Supply and laying of MS Pipe 100 mm dia 6mm thick

Supply, installation, testing and commissioning of C.I. non - return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc as required Makes: Audco / Kirloskar / BDK / HShankar/ Leader/ Zolotto / Intervalve/ Honeywell./ Kartar

Supply and delivery of 4.00 Sq.mm flat cable wire(ELEC-1.6.3 )

Supply of service main WPSC (Weather Proof Single Core) ISI Alluminium Wire 16 sq.mm (ELEC-1.6.1)

Construction of pipelines for water supply with HDPE as per IS 4984-1995 specifications, with its amendments and revisions thereon including supplying of pipes,necessary specials such as bends, Tees, etc. lowering, laying and jointing of pipe lines true to alignment and gradient, The rates are inclusive of cost and conveyance of all materials and labour charges for finished item of pipeline work-90 mm HDPE 6 Kg

Supply and Fixing of 80 mm dia sluice valve the rate including all charges etc complete

Cutting CC road surface including stacking of excavated materials Excluding all Taxes. For pipe dia 63 mm to 315 mm.

Cement concrete (M 20) Nominal Mix using 20mm metal using concrete mixer- C.C.Road Surface ( laying)