REPAIRS TO PVC DOOR, SANITARY FITTINGS, SOIL/WASTE PIPE AT AF STATION MANAURI

Amount

Taking up or down steel tubing & connection 15mm bore including S & F for GI tubing medium grade 15mm dia galvanised with all fitting & fixed complete to wall, floor & ceilings complete all as specified & directed

Taking up or down steel tubing & connection 15mm bore including S & F for GI tubing medium grade 20mm dia galvanised with all fitting & fixed complete to wall, floor & ceilings complete all as specified & directed

Cutting chases for concealed water tubing and making good to disturbed surfaces in CM 1:3 cutting not exc 10cm in girth complete all as specified and directed

Demolition of brick masonry built in cement mortar complete all as specified and directed

M & L for brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed

M & L for brick work with sub class 'B' bricks straight or curved on plan any radius as in half thick wall built in CM 1:4 complete all as specified and directed

M & L rendering 15mm thick cement plaster 1:6 on fair faces of brickwork or concrete surface and finishing even and smooth without using extra cement all as specified and directed

Taking down chowkat with shutter (without taking off shutter from the frame) area n.exc 1.5 Sqm each complete all as specified and directed

Taking down shutters of any description exc 1.0 Sqm but n.exc 2.0 Sqm each complete all as specified and directed

S & F factory made solid PVC door frame of size 50 x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, as per specification & drawing mentioned in SSR

M & L factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC C channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading & jointed together with solvent cement, and as per specification & drawing mentioned in SSR and directed by Engr-in-Charge.

S & F stainless steel wire cloth 0.36mm nominal dia of wire & average width of aperture 1.40mm and fixed with stainless steel wire staples

S & F in repairs aluminium alloy anodised sliding door bolt with hasp, staple and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy of 250mm long complete all as specified and directed

S & F in repairs butt hinges, medium weight, cold rolled mild steel 100mm size

S & F in repairs butt hinges, medium weight, cold rolled mild steel 75mm size

S & F in repairs aluminium anodised barrel tower bolts of extruded section 150mm long complete

S & F in repairs aluminium handle fabricated type anodised 150mm long complete

S & in repairs plain aluminium sheet 0.56mm thick fixed with nails to wooden shutters

S & F in repairs mild steel handle left/right for steel window including necessary welding.

S & F in repair 450mm long MS stay

Hacking out old broken glass (any thickness, size, quality or description) from wooden/metal frame including punching or drilling out old glazing pins/spring clips complete all as specified & directed

S & F 3mm thick figured glass pin headed type and glazing with oil putty in square n.exc 0.5 Sqm in each pane complete

S & F 4mm thick figured glass pin headed type and glazing with oil putty in square n.exc 0.5 Sqm in each pane complete

M & L welding in repairs, n.exc 2.5cm in length, thickness of metal to be welded n.exc 6mm complete

Taking down eaves gutters, rain water pipes (any size or pattern) including all fittings, heads, shoes, bends, swan-necks etc including cleaning or refixing or removal to stores complete

S & F 110mm PVC SWR pipes single socketed in any length laid in trenches or in floor complete

S & F 75mm PVC SWR pipes single socketed in any length laid in trenches or in floor complete

S & F in repair PVC (SWR) bends any radius 110mm dia

S & F in repair PVC (SWR) single T equal or unequal 110mm dia

S & F in repair PVC (SWR) bends any radius 75mm dia

S & F in repair PVC (SWR) single T equal or unequal 75mm dia

S & F in repair 75mm dia PVC floor trap including grating fixed in floor with cement complete

S & F in repairs vitreous china wash hand basin white flat back size 550 x 400mm including angle iron brackets, CP waste coupling and 32mm dia waste pipe complete.

S & F in repairs vitreous china wash down closet (pedestal pattern/EWC) pan white with 'P' or 'S' trap including connection to drain or outgoing and to syphonage pipe complete.

S & F in repairs vitreous china squatting pan Orissa pattern long pan size 580 x 440mm white with 'P' or 'S' trap, front or back inlet with murga bend and including provision of lime/cement concrete bedding complete

S & F in repairs vitreous china bowl type urinal, flat back of size 465 x 355 x 265mm, white with grating and union for discharge pipe & waste pipe complete.

S & F in repairs for 15mm bore Pillar taps, cast copper alloy, with capstan heads, FancyType chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed (Make:-Prayag/ Jaguar/ Parryware/ Hindware)

S & F in repairs for 15mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed (Make:-Prayag/ Jaguar/ Parryware/ Hindware)

S & F in repairs cast copper alloy CP stop cock/angle cock of 15mm bore complete (Make:-Prayag/ Jaguar/ Parryware/ Hindware)

S & F in repairs 15mm bore, fancy type bib tap cast copper alloy, CP with crutch or butterfly handle complete (Make:-Prayag/ Jaguar/ Parryware/ Hindware)

S & F in repairs 15mm bore bib tap cast copper alloy, CP with crutch or butterfly handle complete (Make Prayag, Jaguar, Plumber)

S & F in repairs 15mm bore fancy type shower rose CP complete (Make Prayag, Jaguar, Plumber)

S & F in repairs hand shower (health faucet) with 1 Mtr flexible tube with hot & cold water supply wall hook, bracket etc complete set of superior quality (Make:-Prayag/ Jaguar/ Parryware/ Hindware)

S & F stainless steel peg set of 5 pins

S & F in repairs stop cock (concealed type) cast copper alloy screwed down high pressure with clutch or butterfly handle screwed both ends for iron pipes of for unions and fixed to 15mm bore complete (Make:-Prayag/ Jaguar/ Parryware/ Hindware)

S & F in repairs brass CP wall mixer for mixing hot & cold water with provision for over head shower with arm and long bend pipe and wall flanged screwed down for iron pipe of 15mm bore size complete (Make:-Prayag/ Jaguar/ Parryware/ Hindware)

S & F in repairs 15mm bore bib tap, fancy type PTMT screwed for iron pipe complete (Make Prayag or as specified in Appendix B to Particular specifications)

S & F in repairs 15mm bore pillar tap, fancy type PTMT screwed for iron pipe complete (Make Prayag or as specified in Appendix B to Particular specifications)

S & F in repairs 15mm bore angle stop valve, fancy type PTMT screwed for iron pipe complete (Make Prayag or as specified in Appendix B to Particular specifications)

S & F in repairs 32mm bore brass CP bottle traps for wash basin with inlet & outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete (Make:-Prayag/ Jaguar/ Parryware/ Hindware)

S & F in repairs 40mm bore brass CP bottle traps for wash basin with inlet & outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete (Make:-Prayag/ Jaguar/ Parryware/ Hindware)

S & F in repair Mild steel chomium plated soap dish fixed to plugs with chromium plated brass screws complete & as directed

S & F in repairs toilet paper holder CP box type complete (Make:-Prayag/ Jaguar/ Parryware/ Hindware)

S & in repairs PVC connection 450mm long 15mm size with brass CP nuts at ends complete

S & in repairs PVC connection 600mm long 15mm size with brass CP nuts at ends complete

S & F in repairs low level flushing cistern PVC 10 Ltrs capacity with all internal fittings, bracket and 32mm bore PVC flush pipe complete

S & F in repairs PVC flush pipe 32mm bore for low level flushing cistern complete

S & F in repairs PVC grating doom 125mm dia with waste hole complete

S & F in repairs PVC grating doom 100mm dia with waste hole complete

S & F in repairs tubular towel rail 20mm dia 'D' type, 600mm long of CP fixed with and including CP brass screws and wooden/plastic cleats

S & F in repair 20mm ball valves high pressure PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete

S & F in repair 15mm ball valves high pressure PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete

Dismantling of floor, hearth or wall tiling including cement mortar bedding but not backing and removing serviceable tiles to store yard and rubbish off the premises complete all as specified

M & L for non skid coloured ceramic tiles in floor of any shade area of each tile exc 0.06 Sqm but not exc 0.11 sqm & 7 to 8 mm thick in floors etc set and jointed in neat cement slurry and pointed with cement to match over and including 15mm thick screed bed or bedding layer in CM 1:6

M & L for glazed coloured ceramic tiles size 450mmx300mm & 7 to 8 mm thick in vertical surfaces set and jointed in neat cement slurry and pointed with cement to match over and including 10mm thick backing coat in CM 1:3.

Demolition of cement concrete of any description and in any position & disposed off where directed.

M & L for providing PCC 1:2:4 (using 12.5mm graded aggregates) in sunken portion

M & L for providing PCC (1:5:10) type E-2 using 40 mm graded stone aggregate as in sub base of floor.

Supply only integral water proofing compound

Taking down existing water proofing treatment and cleaning roof or sunken floors by washing and rubbing etc and removing the material retrieved to a distance n.exc 500m where directed and providing water proofing treatment to sunken floors all as given below :- (a) Making fillet of size 25mm x 25mm at corner of slab and wall with polymer modified cementitious (PMC) mortar consisting of one part of tapecrete P-151, two parts of cement and 6 parts of fine sand by weight. (b) Sealing joints of pipe with epoxy putty CICO POXY LC or epoxy mortar CICO POXY 2125. (c) Cleaning the concrete surface by brushing and watering and applying a coat of tapecrete P-151 Acrylic Polymer Modified cementitious slurry consisting of one part of TAPCRETE P-151 and two parts of cement by weight. The coating shall be carried out upto 300mm above FFL and shall be allowed to dry for 4-6 hours. (d) Applying a coat of TAPCRETE brush topping 1.5mm thick consisting of one part of TAPECRETE P-151, two parts of cement and two parts of silica sand by weight and cured for 2 days. (e) Applying 15mm thick plaster in CM 1:4 mixed with CICO super at 100ml per 50 Kg cement on treated surface

Note :- Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material. The contract amount shall be arrived at after deduction of Schedule of Credit from the total quoted amount in BOQ.

RK Enterprises

HIMANSHU TRADERS

Minakshi Construction

GITANSH CONSTRUCTION CO.