SPL REPAIRS TO BLDG NO 504 AND 508 MD ACCN, PROVN OF RAIN WATER HARVESTING POND AT FORT AREA NAGPUR AND PROVN OF GUARD ROOM WITH URINAL POINT AT MD ACCN PROJECT LINE OF CERTAIN UNIT UNDER GE KAMPTEE

Amount

Demolation of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone wall, etc including raking out joints hacking for key, scrubbing down with water etc complete all as specified and directed.

Dismantling of brick work or stone/ boulder masonary built in cement mortar including ashlar facing dressed stone and pre-cast concrete articles complete all as specified and directed.

Taking down door / window frame with shutter of any description (without taking off shutter from the frame) area not exc 1.5 sqm complete all as specified and directed.

Taking down door / window frame with shutter of any description (without taking off shutter from the frame) but area exc 1.50 sqm but not exc 4 sqm complete all as specified and directed.

Taking down shutters of any description exc 1.00 Sqm but not exc. 2.00 Sqm complete all as specified and directed.

Dismantling of PVC pipes (110mm/ 75mm bore), jointed in cement mortar and taking out of trenches/ from walls including fittings as bands, branch pieces, traps etc complete all as specified and directed.

Demolition of 150mm dia cement concrete bed in haunching and breaking up drain pipes SGSW set in cement mortar complete all as specified and directed.

M&L for TMT bars of 10mm dia and over cut to length, bent to shape as required and binding with mild steel wire (annealed) not less than 0.90 mm dia etc complete all as specified and directed.

M&L for mild steel TMT bars 8mm dia in spacers, cut to length, bent to shape required, including cranking, bending and binding with mild steel (anneal) wire not less than 0.90mm dia complete all as specified and directed.

S&F mild steel TMT bars 8 to 10mm dia as in stirrups, spacers and binders complete all as specified and directed.

M&L for cement concrete 1:2:4 type B-I (using 20mm graded stone aggregate) as in lintels up to 1.5m clear span, cills, steps, seismic bands and other similar bands, parapets, copings, benching, bed plates, kerbs and the like including weathering, slightly rounded or chamfered angles and throating including formwork complete all as specified and directed.

M&L for brickwork with old size fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed.

All as per item No 14 above but half brick wall in CM 1:4 complete all as specified and directed.

M&L for rendering 10mm thick on surfaces of ceiling in cement mortar (1:3) and surfaces finished fair and even complete all as specified and directed.

M&l for rendering 15mm thick in cement plaster in cement mortar 1:6, finished even and smooth without using extra cement complete all as specified and directed.

M&L for 15mm thick rendering CM 1:4 on fair faces of brick work using water proofing compound as per manufacturer's instruction (WPC shall be measured separately) complete all as specified and directed.

Supply only liquid water proofing admixture of Make- Pidilite or equivalent complete all as specified and directed.

M&L for colored glazed ceramic tiles in vertical surface 300x 450x 6-7mm thick set and jointed in neat cement slurry and pointed in white or colored cement to match including rendering 10mm thick in cement mortar 1:3 complete all as specified and directed.

M&L for joint free colored non skid ceramic tiles 6 to 7mm thick (square or rectangular) area of each tile exceeding 0.18 sqm but not exc 0.38 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or colored cement to match over 15mm cement screed bed in cement mortar 1:4 complete all as specified and directed.

M&L for joint free colored non skid ceramic tiles 6 to 7mm thick (square or rectangular) area of each tile exceeding 0.18 sqm but not exc 0.38 Sqm in skirting etc set and jointed in neat cement slurry and pointed in white or colored cement to match including rendering 10mm thick in cement mortar 1:3 complete all as specified and directed.

M&L for joint free colored non skid ceramic tiles 6 to 7mm thick (square or rectangular) area of each tile exceeding 0.06 sqm but not exc 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or colored cement to match over 15mm cement screed bed in cement mortar 1:4 complete all as specified and directed.

M&L for RCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in landings, cover slabs, (for man holes etc) and similar articles with plain faces set in cement mortar 1:4 complete all as specified and directed.

M&L 75mm thick cement concrete type B-2, 1:2:4 (using 20mm graded stone aggregate), finished fair and even without using extra cement for plinth protection, paving and similar work complete all as specified and directed.

M&L for cutting chases, pinning in, making good to facings where required and Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.;and cutting chases for concealed cills, sunshades, shelves, lintels, etc. water tubing or concealed conduit complete all as specified and directed.

S&F 2nd class hard wood plain solid straight chowkats & frame wrought framed on the solid rounded or chamfered put together with glue pinned joints complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening complete all as specified and directed.

S&F Factory made solid PVC panelled door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain coloured PVC 'C' channel having PVC sheet strip of 20mm width struck inside with solvent cement for styles and plain colour PVC sheet for Top rail: panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the style and rail with suitable PVC sheet beading and jointed together with solvent cement etc fixed with frame at site complete all as specified and directed.

S&F 35mm thick plain framed panelled factory made shutter made out of IInd class hard wood rail and styles and panel of 12mm thick veneered particle board or 9mm thick plywood with commercial veneering on both faces the size of rail and style as per IS 1083 (part-I) kiln seasoned and chemically pressure treated of any number of panel complete all as specified and directed.

S&F factory made solid PVC panelled door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain coloured PVC 'C' channel having PVC sheet strip of 20mm width struck inside with solvent cement for styles and plain colour PVC sheet for Top rail but wire gauzed i.e. panel will be of wire gauze in lieu of PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly complete all as specified and directed.

S&F 30mm thick flush shutters solid core construction with Block board and plywood face panels commercial type both side complete all as specified and directed.

S&F 150mm aluminium handles, cast type, anodised complete all as specified and directed.

S&F 300mm aluminium anodises sliding door bolts, with hasp, clips of sheet, cast or extruded section and fixing bolts and sections or cast aluminum alloy and fixed complete all as specified and directed.

S&F 150mm long aluminium anodised, barrel tower bolt of extruded section complete all as specified and directed.

S&F 100mm size mild steel butt hinges medium weight cold rolled, complete all as specified and directed.

S&F Harrison rails, mild steel, chromium plated Curtain rod and mounting hardware including telescoping brackets modular type complete all as specified and directed.

S&F Anodized aluminium frame (powder coated) for doors, window, ventilator with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

S&F aluminium (powder coated) three track sliding window comprising of one fly proof shutter and two glazed shutters with frames of size 92.0mm x 31.75mm x 1.30mm thick and shutter frames of size 40mm x 18mm x 1.55mm thick with necessary joining cleats, glazing clips, rubber gasket, anodised aluminium snap beading and connected locking arrangement complete all as per manufacturer's catalogue and specifications complete all as specified and directed. Notes:- (i) Glass filling in panels of windows and aluminium wire mesh/wire cloth shall be deemed to be included in the quoted rate for the item; (ii) Aluminium alloy wire cloth in panels of wire gauzed shutter shall be 0.45 mm nominal dia of wire and avg width of aperture 1.40 mm, fixed with aluminium wire staples; (iii) Glass filling in panels of glazed shutter shall be 4 mm thick tinted sheet glass of approved make and shade/tint Make of Aluminium Sections powder coated: Jindal or equivalent.

S&F 3mm thick sheet glass ordinary quality not exc 0.50 sqm in each pane and fixed with oil putty in square etc complete all as specified and directed.

S&F framed work such as grills, guard bars with mild steel square bars with ends of bars shouldered and/ or riveted and similar work confirming to FE 290 Gde-E-165 complete all as specified and directed.

S&F Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperature 1.18mm as in gauze door /window/ ventilators shutters complete all as specified and directed.

S&F GI tubing 15mm bore medium grade with all fittings and fixed to wall including taking up or down existing GI tubing complete all as specified and directed.

S&F GI tubing 20mm bore medium grade with all fittings and fixed to wall including taking up or down existing GI tubing complete all as specified and directed.

S&F 15mm GI tubing 'Medium grade' with all fitting and fixed complete to wall and celing or laid in floor complete all as specifed and directed.

S&F 20mm GI tubing 'Medium grade' with all fitting and fixed complete to wall and celing or laid in floor complete all as specifed and directed.

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 500 litres capacity hoisted and fixed in position and including dismantling water tank and removing from site complete all as specified and directed.

S&F in Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 1000 litres capacity hoisted and fixed in position complete all as specified and directed.

S&F in Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 2000 litres capacity hoisted and fixed in position complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 1000 litres capacity hoisted and fixed in position and including dismantling of existing water tank and removing from site complete all as specified and directed.

S&F 15mm bore ball brass valves high pressure with polythene float and fly nut complete, screwed for iron pipe or brass ferrule complete all as specified and directed.

M&L for PCC 1:5:10 type E-2 (using 40mm graded stone aggregate), as in sunken floor fillings and mass concrete, complete all as specified and directed.

M&L for rendering 10mm thick in CM 1:3 on fair faces of brick masonry or concrete surfaces by using water proofing liquid compound as per manufacturer instructions, finished even & smooth without using extra cement in sunken portion complete all as specified and directed. Note:- Liquid water proofing compound shall be measured and paid separately under respective items.

M&L for providing and applying two coats of Brushbond-acrylic polymer modified cementtations water proof coating after carrying out proper surface preparation including removing loose concrete, foreign materials, cleaning of concrete surface, etc pre dampning of concrete surface, mixing all components of Brush bond using heavy duty slow speed drill fitted with mixing paddle followed by application of two coats using a suitable brush as per manufacturer's instructions complete all as specified and directed.

S&F in repairs vitreous china squatting pan Orissa pattern 580 X 440mm long with integral foot rest, S or P trap including connection to trap and to flushing pipe etc complete including making good to floor complete all as specified and directed.

S&F in repairs 10 ltr capacity PVC valve less symphonic action type flushing cistern low level, white with inlet ball valve, float and handle including bracket etc complete all as specified and directed.

S&F in repairs Wash Hand basin of size 455 x 355 x 165mm white including fixing accessories complete all as specified and directed. Make: Essco by Jaquar (Cat No- ECS-WHT-803) or equivalent.

S&F in repairs sinks made of stainless steel, 1mm thick for kitchen or laboratory with pIngs including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repairs wall mixer with provision for overhead shower with 115mm Long bend pipe on upper side, connecting legs & wall flange complete all as specified and directed. Make: Essco by Jaquar (Cat No:APR-101273) or equivalent.

S&F in repairs Angular Stop Cock with wall flange complete all a specified and directed. Make: Essco by Jaquar (APR-101053) or equivalent

S&F in repair Overhead shower 100mm dia round shape Single flow (ABS body chrome Plated with Gray Face Plate) with Rubit cleaning System including shower Arm of 240mm long complete all as specified and directed. Make: Essco by Jaquar (Cat No- EOS-542N & ALE-536A) or equivalent.

S&F single towel rail 600mm long, stainless steel, fixed to walls with chromium plated (CP) brass screws complete all as specified and directed. Make:- Essco by Jaquar (AEC-1111) or equivalent.

S&F in repairs 32mm waste fittings, brass, chromium plated for glazed are sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F in repairs 40mm waste fittings, brass, chromium plated for glazedware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F in repairs bib cock with wall fange complete all as specified and directed. Make:- Essco by Jaquar (Cat No:APR-101037) or equivalent

S&F in repair brass CP fancy type 15mm bore pillar cock woth 450mm long Braided hose complete all as specified and directed. Make:- Essco by Jaquar (Cat No:APR-101001) or equivalent

S&F PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed.

S&F grating dome 100mm dia of PTMT (Min weight 25 gms) complete all as specified and directed.

S&F in repairs floor trap 100mm dia with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B1 complete all as specified and directed.

M&L for Granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platforms and other similar situations complete all as specified and directed.

S&F in repairs PVC (SWR) bends any radius of 75mm bore complete all as specified and directed.

S&F in repairs PVC (SWR) bends any radius of 110mm bore complete all as specified and directed.

S&F in repairs PVC (SWR) junction single, (Single T), equal or unequal of 75mm bore complete all as specified and directed.

S&F in repairs PVC (SWR) junction single, (Single T), equal or unequal of 110mm bore complete all as specified and directed.

S&F in repairs PVC (SWR) vent cowl of 110mm bore complete all as specified and directed.

S&F in repairs PVC (SWR) vent cowl of 75mm bore complete all as specified and directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed in floor/ wall 75mm bore complete all as specified and directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/ floor 110mm bore complete all as specified and directed.

S&F in repairs 32mm bore of pipe of low density polyethylene pipe (LDPE) of pressure rating 6kgf/Sqcm fixed complete all as specified and directed.

S&F in repairs 40mm bore of pipe of low density polyethylene pipe (LDPE) of pressure rating 6kgf/Sqcm fixed complete all as specified and directed.

M&L for concrete bed to drain pipes for 150mm dia pipe including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete (1:3:6) type C2 complete all as specified and directed.

M&L for salt glazed stoneware drain pipe 150mm dia laid in trenches and jointed complete all as specified and directed.

S&F in repairs 25mm thick block board grade-I quality interior grade decorative type with decorative face veneer on both face fixed with screw to timber frame work with beading as required complete all as specified and directed.

M&L for preparation of newly steel surfaces of any description over 10cm width or girth & applying two coats synthetic enamel paint complete all as specified and directed.

M&L for preparation of old steel surafces of any description over 10cm width or girth & applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.

M&L for preparation of old wooden surfaces of any description over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description over 10cm width or girth & applying two coats synthetic enamel paint over a coat of primer complete all as specified and directed.

M&L for preparation of new surface of wall and applying two coats of oil bound distemper over a two coats of birla white care putty complete all as specified and directed.

M&L for complete removal of existing treatment of walls and applying two coats of oil bound distemper over a coat of birla white care putty complete all as specified and directed.

M&L for complete removal of existing treatment of ceiling and applying two coats of oil bound distemper over a coat of birla white care putty complete all as specified and directed.

Removing building materials etc to a distance of up to 5.00 Km, beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified and directed.

M&L for complete removal of existing treatment and preparation of surfaces and applying two coats of weather shield paint (apex) over coat of primer complete all as specified and directed.

M&L for preparing new plastered surface and applying two coats of weather shield paint (apex) over coat of primer complete all as specified and directed.

M&L for PCC (1:2:4) type B-1, using 20mm graded stone aggregates, as in kerb or side of path, on chajja top and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

Excavation in trenches not exc 1.5m in deepth and 1.5m in width and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm in hard/ dense soil complete all as specified and directed.

Removing excavated material (soil) not exc 50m and deposited where directed at a level not exc 1.5m above the starting point complete all as specified and directed.

S&F in repairs 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

M&L for providing cement concrete 1:4:8 type D2 (Using 40mm graded stone agg) as in foundation, mass concrete and fillings complete all as specified and directed.

M&L for form work to side of concrete in fdns, footing base, base of columns, side and soffits of plinth beam and simillar work complete all as specified and directed.

M&L for providing RCC 1:1 1/2:3 type A-1 (nominal mix) as in footing, foundation, beams, plinth beams, base for columns and mass concrete etc complete all as specified and directed.

M&L for form work to side of columns and similar work complete all as specified and directed.

M&L for providing RCC 1:1 1/2:3 type A-1 (nominal mix) as in columns and pillars etc complete all as specified and directed.

M&L for form work to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, and similar work complete all as specified and directed.

M&L for providing RCC 1:1 1/2:3 type A-1 (nominal mix) (using 20mm graded stone aggregate) as in Beams, cantilevers, bressummers, lintels over 1.5m span concrete etc complete all as specified and directed.

M&L for form work to chullah hoods, chajjas, troughs and similar items including edges and similar work complete all as specified and directed.

M&L for providing RCC 1:1 1/2:3 type A-1 (nominal mix) (using 20mm graded stone aggregate) as in chajja etc complete all as specified and directed.

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

M&L for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs not exc 20cm wide complete all as specified and directed.

M&L for providing RCC 1:1 1/2:3 type A-1 (nominal mix) (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall applying two coats of cement base paint over a coat of primer compete all as specified and directed.

M&L for Moorum/red bajri filling in floors or pavings, laid in layers not exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

M&L for hardcore of gauge not exc. 63mm deposited, spread and levelled in layers not exc 15cm thick watered and rammed to a true surface for plinth protection/ path complete all as specified and directed.

M&L for mild steel angle iron as in framed chowkats for door shutters cut to length including necessary welding and making holes for fixing butt hinges and fixing 10mm dia as tie bar complete confirming to Fe-410 -O etc complete all as specified and directed.

S&F 30mm thick flush shutters solid core construction with block board core and plywood face panels commercial type on both sides and both face is covered with decorative face veneer with lipping/ frame to match complete all as specified and directed.

S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 4mm thick moulded laminated PVC Sheet on the front face & 4mm plain colour PVC sheet on back face, with wood free EPS supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

S&F Extruded Aluminium alloy handles, fabricated type anodised of 125mm long complete all as specifed and directed.

S&F Aluminium anodised barrel tower bolts of extruded section and fixed of 100mm long complete all as specifed and directed.

S&F aluminium alloy, anodised, 250mm long sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F steel window with side hung shutters including projecting or box stype hinges with steel handle peg stay and divided into square with glazing bars dovetailed or welded, to receive glazing, or gauzing including one coat of primer including fixing of hold fast of size 25 x 5mm flat iron etc all complete all as specified and directed.

All as per item No 123 but without glazing bars complete all as specified and directed

S&F steel ventilator with top hung shutter including hinges peg stay to receive glazing or gauzing and one coat of primer including fixing of hold fast size 25 x 5mm of flat iron etc complete all as specified and directed.

M&L for 4mm thick frosted sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each panes complete all as specified and directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and as directed.

S&F towel rail 20mm dia of chromium plated fixed with and including chromium plated brass screws and wooden/ plastic cleats complete all as specified and directed.

S&F Wash Hand basin (flat back or angle back) of size 550 x 400mm, white including waste coupling, chain and plug, porcelain stopper including for & pinning in ends of brackets including supply & fixing of waste pipe complete all as specified and directed.

S&F pillar taps 15mm bore dia cast copper alloy with capstan heads, chromium plated, fancy type screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwd shank and fly nut screwd for iron pipes, complete all as specified and directed.

S&F Vitreous China urinals, half stall type, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and directed.

S&F 15mm bore CP Urinal spreader for urinals complete all as specified and directed.

S&F bib taps fancy type chromium plated, with crunch or butterfly handle screwed down,screwed for iron pipe or for brass ferrule and fixed of 15mm bore complete all as specified and directed.

S&F stop/angle cock fancy type chromium plated, screwed down, high presure with cruntch or butterfly handle screwed both ends for iron pipe of 15mm bore pipe complete all as specified and directed.

S&F PVC (SWR) floor trap, plain with grating including jointing with solvent cement of 75mm dia complete all as specified and directed.

M&L for excavation in trenches in depth not exc 1.5m in soft/ disintegrated complete all as specified and directed.

Removing of excavated material exc 250m but not exc 500m and depositing where directed complete all as specified and as directed.

M&L for walling of random rubble, uncoursed, well bonded, bedded and hearted, built in cement mortar (1:6) complete all as specified and as directed.

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

M&L for formwork to sides of wall and similar work etc for rough finish surface of concrete complete all as specified and directed.

M&L for RCC type B1 1:2:4 (using 20mm graded stone aggregate) slabs supported on walls, beams, retaning wall and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for 40mm thick sand stone slabs, dressed close picked on exposed faces, set and jointed in cement and stone dust mortar 1:3 and pointed in cement mixed with approved pigment to match complete all as specified and directed.

Supply, fixing, testing and commitioning of sprinklers complete all as specified and directed.

Taking down point wiring with aluminum conductor cable of light point fan & socket light & power complete including light fittings any type switches, sockets, ceiling rose, switch boards, bell/ buzzer, bell push, tube light fitting, regulator etc, and making good to the disturbed surfaces of walls/ floor etc to match with existing surfaces including white washing/ colour washing/ distemper to match with existing wall /floor /ceiling finishes complete all as specified and directed.

Taking down sheet metal enclosure DB, MCB, main switch etc and making good disturbed surfaces to match with existing surfaces complete all as specified and directed.

Taking down sub main wiring of any size/ capacity complete all as specified and making good disturbed surfaces to match with the existing surfaces complete all as specified and directed.

M&L for point wiring 1100 volt grade single core FRLSH PVC insulated and unsheathed cable with multistranded copper conductor 1.50 sqmm drawn in and including electrical grade PVC conduit not less than 20mm dia with IS 9537 (Part-III) 1983 marked medium grade concealed on surface of wall/ ceiling including FRLSH PVC insulated unsheathed earth wire with multistranded copper conductor of size 1.50 sqmm pressed steel modular boxes sunk on wall for mounting of modular switches, switch sockets, fan regulator etc including modular cover with frame any size complete all as specified and making good disturbed surfaces for one light point controlled by one, one way switch. Note:- Cost of cable provided from sub main DB to respective switch board in rooms shall be included in the quoted point wiring rate. All switches, fan, sockets, ceiling roses and holders shall be connected to common earth dolly.

All as per item No 168 above but one ceiling /exhaust fan point controlled by one switch and regulator complete all as specified and directed.

All as per item No 168 above but one 3 pin 5 amp socket out point on the same board with other switches complete all as specified and directed.

All as per item No 168 above but one 3 pin 5 amps socket out let point on independent board complete all as specified and directed.

All as per item No 168 above but one light point controlled by two two-way switches complete all as specified and directed.

All as per item No 168 above but one bell/buzzer point controlled by one bell push complete all as specified and directed.

All as per item No 168 above but wiring with 2.5 sqmm multi stranded cable and earth wire with copper conductor of size 2.5 sqmm for 15 amps power point complete all as specified and directed.

All as per item No 168 above but wiring with 4 sqmm multi stranded cable and earth wire with copper conductor of size 2.5 sqmm for 15 amps power point complete all as specified and directed.

M&L for sub main wiring with two single core PVC FR LSH insulated unsheathed stranded copper conductor and earth wire 1100 volt grade and drawing into PVC conduit not less than 20 mm dia, medium grade, concealed in wall of size 2x6.0 Sqmm with earth wire of 1x4.0 Sqmm complete all as specified and directed. Note :- Accessories for point/sub main wiring like PVC junction box, bend, Tee, elbow shall be of same make.

S&F ceiling rose surface type 2/3 terminal 5 amps complete all as specified and directed.

S&F bell ding dong, AC 230 volts, single phase complete all as specified and directed.

S&F modular switch one way 6A, 1 module complete all as specified and directed.

S&F modular switch two way 6A, 1 module complete all as specified and directed.

S&F modular switch one way 16A, 1 module complete all as specified and directed.

S&F modular switch one way 6/16A, 3 pin complete all as specified and directed.

S&F modular bell push 5A, 1 module, one way complete all as specified and directed.

S&F modular socket 6A 2/3 pin combined 2 module complete all as specified and directed.

S&F modular socket 6A/ 16A 2/3 pin combined 2 module complete all as specified and directed.

S&F modular fan step regulator, 120 watt 2 module complete all as specified and directed.

S&F lamp holder insulated body with back plate for angle / batten fittings complete all as specified and directed.

S&F 18/20 watt LED tube light fittings complete with aluminium body including tube rod, driver with not less than 2000 lumen output and input rated voltage 240V connecting with 2 core 1 sqmm copper conductor cable complete all as specified and directed. Make:- Philips Astraline 20W/ CG cat No LCTLN-18/20-CDL / Bajaj BCLSB 18W

S&F highly durable surface mounted 18/20 watts LED batten/ surface constructed of fire retardant engineering grade extruded aluminium body 100 lumen per watt, min 2000 lumen and decorative end cap complete with driver including 3 core 1.0 sqmm copper conductor cable for connection and accessories complete all as specified and directed. Make:- CG cat No LCTLN-20-CDL or equivalent in Philips/ Luker.

S&F light fitting 9W bulk head luminaries with lamp holders etc complete with all accessories and including connecting up with twin core twisted flexible cable suitable size of 230V, 50HZ complete all as specified and directed. Make:- CG cat No LBHP-10-CDL or equivalent in Philips/ Luker.

S&F in repairs LED baton fitting 2' length including drivers having energy consumption, 10/11W, 230 V, 50Hz, 6500K, not less than 800 lumen prewired, complete all as specified and directed. Make:- CG Cat No LCTLN-9/10WCDL / Surya SLE BT 10 / Bajaj BCLSB 10W.

S&F in repairs 7 watt LED lamp cool day light 240 volts, 50 Hz complete all as specified and directed.

S&F building security light LED 25 W with Lumen O/P 1800 with driver with rated voltage 240 V, 50Hz, including mounting GI (made out of 25 mm dia light grade pipe 0.8 m bent two shape including FI clamps nut bolts etc) complete all as specified and directed. Make:- CG Cat No LST-25-CDL or equivalent in Philips/ Luker.

S&F sheet metal enclosure single pole & neutral for 240 volts 4 way with 200 Amp rated bus bar flush /surface mounting double door complete all as specified and directed.

S&F sheet metal enclosure single pole & neutral for 240 volts 8 way with 200 Amp rated bus bar flush /surface mounting double door complete all as specified and directed.

S&F sheet metal enclosure triple pole & neutral for 415 volts 4 way with 200 Amp rated bus bar flush /surface mounting double door complete all as specified and directed.

S&F MCB single pole 240 volt 6 to 40 amps 10 KA breaking capacity, 'C' series complete all as specified and directed.

S&F MCB single pole and neutral 240 volt 6 to 40 amps 10 KA breaking capacity, 'C' series, complete all as specified and directed.

S&F MCB single pole and neutral 240 volt 40 to 63 amps 10 KA breaking capacity, 'C' series, complete all as specified and directed.

S&F MCB triple pole and neutral 415 volt 40 to 100 amps 10 KA, 'C' series, and current carrying capacity in the DB with connection testing and commissioning complete all as specified and directed.

M&L for earthing complete with galvanized street earth plate electrode 600 x 600 x 6mm thick buried directly in ground (earth plate not less than 2.25mtr deep below normal ground level) with top edge of the plate not less then 1.50 mtr. below the normal ground level connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washer of galvanized iron or steel all as shown in electrical plate No 5 connected to earthing test point all as specified and testing on completion including the material and labour for:- (a) Excavation and earth work or drilling hole for electrode in any type of soil. (b) PCC pit in cement concrete 1:2:4 type B-1. (c) Pre cast RCC cover with suitable handle 40mm thick in PCC (1:2:4) reinforced with welded steel wire fabric weighting not less than 1.87 Kg/sqmm. (d) Funnel with watering pipe of GI 20mm nominal bore medium grade and Aluminum lugs etc all as specified. (e) 15mm nominal bore medium grade GI protection pipe up to 7.50 meter long for protection of earthing lead. (f) Requisite quantity of charcoal and common salt. (g) Connection to earthing test point and testing on completion.

S&F electric water heater, storage type steel body with copper inner tank and heating element upto 2KW capacity 25 litre, BEE 5 star rated with accessories such as safety valve, thermostat, NRV, connection piece etc complete all as specified and directed. Make:- Bajaj / Havells / CG

S&F exhaust fan PVC body 300mm sweep, 240V, 50Hz with all fixing accessories complete all as specified and directed.

S&F exhaust fan steel body AC single phase, 230V of size 300mm sweep with blades and frame and louvers with nuts, bolts, washers and connected electrically complete all as specified and directed.

S&F ceiling fan complete with electronic type and accessories 230V, 1200mm sweep, with squirrel cage induction motor, BEE 5 star rated complete all as specified and directed.

S&F double wall corrugated high density polymer ethyl (HDPE) pipe for laying of electric cable of size 50mm outer diameter and 38mm inner diameter with IS 14930 (part 2):2001 laid in trenches, wall, floor, pole including bends, sockets and other connected accessories complete all as specified and directed. Make:- Dura Line/ Tijaria/ REX/ Ketron

Supply and laying in trenches or fixing in walls / poles or drawing through pipe XLPE insulated, screened, PVC bedded, galvanised steel strip, electric power cables (heavy duty) with aluminium conductor, 1100 volts, grade cross sectional area 16 sq mm, 4 core including testing after laid and jointed complete all as specified and directed.

S&F in repairs 25mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe including taking down / removing old unserviceable valve complete all as specified and directed.

S&F GI tubing 25mm bore medium grade with all fittings and fixed to wall / ceilings or laid in floors complete all as specified and directed.

S&F GI tubing 50mm bore light grade with all fittings inside the fountain, wherever required complete all as specified and directed.

Supply and install monoblock submercible pump set, 3 HP, 3 phase, 415 volt, 2760 RPM head to give desired effect of ISI mark as per the system with all fittings etc suitable for water fountain complete all as specified and directed.

S&F LED water proof fountain light, cast aluminium body suitable for 60W GLS lamp (coloured filter) complete with fixing clamps, nut, bolts and washers fixed to wall of founatain complete all as specified and directed.

M&L for wiring with flexible cable 0.5sqmm 3 core PVC insulated and sheathed submercible type with stranded copper conductor (for light) complete all as specified and directed.

M&L for wiring with 3 core 2.5 sqmm cable PVC insulated and sheathed submercible type with stranded copper conductor (for pump) complete all as specified and directed.

M&L for Cable 4 core 16 sqmm 1100 volt grade heavy duty PVC insulated and sheathed, laid in trenches / wall, with stranded aluminium conductor served with an inner sheathing overall armoured complete all as specified and directed.

S&F garden irrigation green hose pipe PVC material with fibre reinforce 50mm bore including MS clamp of size 20x3mm for fixing bracket and fitting with suitable metal clamps, nut and bolts complete all as specified and directed.

NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs.66,760.00]

M/s Rahul Traders

Bidder Name

M/s Rahul Traders

Devika Constructions