Provn of motor pump for bhosari main water pumping station and Provn of regulated power supply to Bldg No-P-193 at CME Pune

Amount

Supply, install, test & commissioning of centrifugal pumping set for water supply assembled and tested for rated efficiency complete with energy efficient motor conforming to IS-12615, Horizontal split casing single stage pump for liquid clear water at 40°C Temp specific gravity 1.0 make Kirloskar Coupled pump set, Model :- UP 150/38 B, Size 200 X 150mm capable of discharging water at 220 Cum/Hr at 40 mtr head, (Capacity of motor not less than 50 HP) MOC - C.I. Std. C.I., Bronze Impeller, CS shaft directly coupled with suitable induction motor 3 phase 415 V, 50 cycle, SQ cage, IE-2 with MS base plate, coupling Guard mounted of MS channel common base plate and fixed with suitable bolts grouted in PCC foundation in PCC (1:2:4) type B1 using 20 mm graded stone aggregate, 30 cm above floor level including PVC insulated unsheathed copper cable of suiable size 3 core multi stranded in PVC conduit for connection from starter to motor with proper lugs thimbles etc. all as directed. Make :- Crompton/ KSB/ Kirloskar

Supply, install, star delta starter fuly automatic suitable for centrifugal pumping set for water supply assembled and tested for rated efficiency complete with energy efficient motor conforming to IS-12615, horizontal split casing single stage pump for liquid clear water at 40°C temp. Specific gravity 1.0 Kirloskar. Make : Coupled pump set, Model - UP 150/38 B, Size 200 X 150 mm capable of discharging water 220 Cum/Hr at 40 mtr head, (capacity of motor not less than 50 HP) including PVC insulated unsheathed copper cable of suitable size 3 core multi stranded in PVC conduit for connection from startar to motor with proper lugs thimbles etc. all as directed. Make :- Crompton/ KSB/ Kirloskar

Excavation in trenches n exc 1.5m wide and n exc 1.5m deep and making good surface for laying /removing of cable all as specified and directed by Engr in charge

Soft/loose soil

Hard/dense soil

Returning filling in excavated soil in trenches, watering and well ramming in layers n exc 25 cm complete all as specified.

Removal of surplus excavated spoil to distance n exc 50 metre all as specified and directed

M & L for bituminous road cutting to a width of 45 cm and depth 50 cm for laying of pipe for laying of UG cables and making good with PCC (1:3:6) type cI (using 20mm grade stone aggregate)

Supplying and laying GI tubing light grade of size 50mm dia bore for encasing cables for mechanical protection, laid under Plinth / Floors/ Paths Culverts or fixed on wall or concealed in wall/ floor or along poles or as street light poles or as street light mounting bracket with complete accessories such as bends/ sockets/ reducers/ saddles incl necessary threading/ drilling works all as specified and directed by Engr-in-charge.

Supply, laying and testing cable XLPE insulated screened pvc bedded galvanised steel strip or wire armoured, electric power cables ( heavy duty) with stranded aluminium conductor 1100 volts grade in trenches/ passing through pipe/fixing on walls, floors etc incl connection with proper sizes lugs and gland, suitable clamp of cross sectional area 3.5 core 50 Sqmm in and including taking out old one all as specified and directed.

Supply & Laying in replacement of Telerex DWC (Double Wall corrugated) HDPE pipe ISI marked of outer dia of 50 mm and inner dia 38 mm polythylene with smooth internal and profiled external surface for non pressure under ground cable incl couplers & bends complete all as specified and directed.

M&L for MCCB 4 pole, 63 Amps, 415 V, 25 kA thermal magnetic release adjustable type complete with enclosure and mounting on the wall with screws, nut and bolts all as specified and directed.

M & L for earthing complete with GI earth plate electrode of size 60 x 60 x 0.6 cms thick burried directly in ground vertically at a depth of not less than 2.25 Mtrs below normal ground level with top edge of the earth plate not less than 1.5 mtr deep below normal ground level connected to galvanised iton strip of 25 x 4 mm as earthing lead by means of nuts, bolts and washers of steel after welding of GI strip to earth electrode to the full length of earth plate, 40 mm dia GI tubing light grade protection pipe upto test point, 20 mm dia GI watering pipe with funnel and wire mesh, PCC pit 1:3:6 with pit cover of size 30x30 CM made of RCC 1:3:6 with suitable handle, angle iron frame of angle iron size 40 x40x4mm, adequate qty of charcoal dust and salt layers all around the earth plate, removal of surplus soil and returning filling in all as required at site all as specified in plate No 3 of SSR Part-I and directed by Engr-in-Charge.

Mukund Engineers and Contractors

M/S kirpan Enterprises

Sachin Electricals

SKS Electricals