REPAIR/MAINT TO FLOOR, PLASTERING, TILING, ROOFING, AC SHEET WITH FALSE CEILING, JOINERY AND CERTAIN OTHER CONNECTED B/R WORK IN ZONE A AREA AT OLD CANTT ALLAHABAD.

Amount

Demolition of cement oncrete (un reinforced) of any description and in any position not secifically provided, complete all as specified and directed.

Demolition of reinforced cement concrete as in chajja and similar suspended works, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc., laid, bedded in any mortar, complete all as specified and directed.

Taking down cement plaster, any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water including removing of all rubbish off from the site, complete all as specified and directed.

Demolition of brickwork or stone / boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed.

Glazed ceramic coloured tiles as in vertical surface of walls such as skirting / dado and risers to steps, size of tile shall be 600mm x 300mm x 7 mm thick, set and jointed in neat cement slurry and pointed in white cement mixed with colouring pigment to match the colour or shade of tiles, laid over and including provison of 10 mm thick rendering as in backing coat of tiles in cement mortar 1:4, complete all as specified and directed.

Non - skid Ceramic, coloured tiles 7 to 8 mm thick, size of each tile shall be 400mm x 400mm, as in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, laid over and including provision of 15 mm thick screed bed in CM 1:6, complete all as specified and directed.

Non skid ceramic coloured tiles 400mm x400mm x 7 to8 mm thick, in skirting, dados, risers to steps, etc, set and jointed in neat cement slurry and pointed in coloured cement to match tiles over and including 10 mm thick rendering in CM (1:4), complete.all as specified and directed.

Virified Ceramic tiles 9 mm thick (square/ rectangular) polished, 600mm x 600mm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles over and including 15 mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed.

Virified Ceramic tiles 9 mm thick (square/ rectangular) polished, 600mm x 600mm, in skirting, dados, risers to steps, etcskirting, dados, risers to steps etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles over and including 10 mm thick rendering in CM (1:4), complete.all as specified and directed.

Pre-polished rubber moulded smooth finish, exterior, designed, pre-cast interlocking tiles/ pavers, 60 mm thick, over 25mm thick sand cushioning, complete all as specified and directed.

Exterior Heavy duty full body coloured paving tiles of size 300mm x 300mm x 8 to 9 mm thick, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match tiles over and including 15 mm thick screed bed or bedding layer in CM (1:6), complete all as specified and directed.

Machine Cut Granite 20 mm thick table rubbed and polished counter top, cooking plateform bedded & jointed with grey cement slurry and pointed with white cement mixed admixture of pigment to match the shade of granite including cutting, polishing and moulding edges including 15 mm thick screed bed or bedding layer in CM (1:6), complete all as specified and directed.

Machine cut baroda Green marble stone slab 18 to 20 mm thick laid over Kitchen cooking platform in 20 mm thick cement screed mortar (1:6) laid and jointed in grey cement slurrry mixed with pigment to match the shade of the slab including cutting, rubbing and polishing complete and including nosing of the edges half round (stone slab shall be fixed in two piece), complete all as specified and directed.

Machine cut Kota stone slab 18 to 20mm thick, flooring over and including 20 mm thick screed bed in cement mortar 1:6, laid and jointed in grey cement slurry mixed with pigment to match slab including rubbing and polishing mirror finish, complete all as specified and directed.

Machine cut kota stone 18-20 mm thick over 10 mm thick bedding layer CM (1:4) in riser of steps, skirting, pillar etc laid and jointed in grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Cement concrete 1:3:6 type C-1 using 20 mm graded stone aggregate in plinth protection, 50 mm thick, finished even and smooth without using extra cement, including making joints 12mm wide to the full depth of PCC at the length n exc 3 metres and at every change of direction and filling the same with & including bitumen and sand 1:3 by weight complete all as specified and directed.

PCC 1:4:8 type D-2 using 40 mm graded aggregate, 75 mm thick, as in sub base of floor etc complete all as specified and as directed.

Cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate in floors, 40 mm thick, laid in panels fixed with glass dividing strip and finished even & smooth without using extra cement complete all as specified and directed. Note: Glass dividing strip shall be measured and paid separately.

Supply only Glass dividing strips, 3 mm thick and 38 mm wide, inserted in position in floors, complete all as specified and as directed.

Precast reinforced cement concrete as in cover slabs (for manholes) chullah hoods, chajjas, water trough, mangers, shelves and other similar works, type B-1, 1:2:4 using 20 mm graded agg. set in cement mortar 1:4, complete all as specified and directed. Note: Reinforcement to be measured and paid separately.

TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

Brickwork with sub class 'B' bricks, straight or curved on plan exceeding 6 metre mean radius, built in CM 1:6, complete all as specified and directed.

Brickwork with sub class 'B' bricks, straight or curved on plan exceeding 6 metre mean radius, built in CM 1:6, complete all as specified and directed. [Except brick]

Rendering 15 mm thick, on brick work or concrete surface in cement mortar 1:4 as in drain, boundary wall etc finished even and fair, complete all as specified and as directed.

Rendering 15mm thick in CM 1:4, mixed with water proofing compound, on brick work or concrete surfaces of walls, finishing the surface even and smooth without using extra cement, complete all as specified and directed. Note: Water proofing compound shall be measured and paid separately.

Preparation of new plastered surfaces of walls and applying two coats of cement base paint of approved colour over a coat of primer, complete all as specifed and directed.

Rendering 15mm thick in CM 1:6 on faces of brick work or concrete surfaces of walls, finishing the surface even and fair, complete all as specified and directed.

Rendering 5mm thick in CM 1:3 on concrete surfaces of ceilings, finishing the surface even and fair, complete all as specified and directed.

Supply only integral water proofing compound, complete all as specified and directed.

Preparation of new plastered surfaces of walls and applying two coats of acrylic emulsion paint of approved colour over a coat of primer over 1mm thick wall care putty finish, complete all as specifed and directed.

Preparation of new plastered or unplastered surfaces of ceilings and applying three coats of white wash, complete all as specifed and directed.

Preparation of old decorated plastered surfaces of walls including cornices, pilaster etc., by brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and applying one coat of acrylic emulsion paint of approved colour, complete all as specified and directed.

Preparation of old decorated plastered surfaces of walls including cornices, pilaster etc., by brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salt, greasy spots and applying one coat of white wash, complete all as specified and directed.

Plain Cement concrete 1:2:4, type B-1 (20 mm crushed stone aggregate) as in roof kerb, mud stop, gola, rounded or chamfered on edges, complete all as specified and directed.

Taking up or down 15mm bore, steel tubing and connections, including cleaning for refixing or removal to store, complete all as specified and directed.

Taking up or down 20mm bore, steel tubing and connections, including cleaning for refixing or removal to store, complete all as specified and directed.

GI tubing medium grade, galvanised with all fittings including short lengths, fixed to ceilings and walls with and including provision of suitable size of clamps or laid in floors, complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc.,), 15mm bore of pipe, complete all as specified and directed.

GI tubing medium grade, galvanised with all fittings including short lengths, fixed to ceilings and walls with and including provision of suitable size of clamps or laid in floors, complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc.,), 20mm bore of pipe, complete all as specified and directed.

GI tubing medium grade, galvanised with all fittings including short lengths, fixed to ceilings and walls with and including provision of suitable size of clamps or laid in floors, complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc.,), 15mm bore of pipe, complete all as specified and directed. [Except tubing]

GI tubing medium grade, galvanised with all fittings including short lengths, fixed to ceilings and walls with and including provision of suitable size of clamps or laid in floors, complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc.,), 20mm bore of pipe, complete all as specified and directed. [Except tubing]

Rotational moulded HDPE water storage tanks (cylindrical vertical with closed top) of 500 litres capacity, ISI marked, double layered hoisted and fixed in position including connecting up pipes including ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed for 20 mm bore size (minimum weight 210gms), fixed in repair,complete all as specified and directed.

Rotational moulded HDPE water storage tanks (cylindrical vertical with closed top) of 1000 litres capacity, ISI marked, double layered hoisted and fixed in position including connecting up pipes including ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed for 20 mm bore size (minimum weight 210gms), fixed in repair, complete all as specified and directed.

Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe 20 mm bore, fixed in repair, complete all as specified and directed.

Ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed for 20 mm bore size (minimum weight 210gms), fixed in repair, complete all as specified and directed.

PVC (SWR) 75 mm bore pipes single socketed ends, in any length with rubber ring joints, fixed to walls, fixed in repairs, complete all as specified and directed.

PVC (SWR) 110 mm bore pipes single socketed ends, in any length with rubber ring joints, fixed to walls, fixed in repairs, complete all as specified and directed.

PVC (SWR) bends with oval access door, ISI marked of any radius of 75 mm bore pipes jointed with rubber solvent, fixed in repairs, complete all as specified and directed.

PVC (SWR) bends with oval access door, ISI marked of any radius of 110 mm bore pipes jointed with rubber solvent, fixed in repairs, complete all as specified and directed.

PVC (SWR) 75 mm dia, junction single, (single T), equal or unequal with oval access door fixed to PVC pipe joint with rubber solvent, fixed in repairs, complete all as specified and directed.

PVC (SWR) 110 mm dia, junction single, (single T), equal or unequal with oval access door fixed to PVC pipe joint with rubber solvent, fixed in repairs, complete all as specified and directed.

Stack clamps out of 50 mm by 5 mm flat iron and iron stays, including bolts and nuts and securing ends of stays to wall or roof for fixing of 110 mm pipe, complete all as specified and directed.

Stack clamps out of 50 mm by 5 mm flat iron and iron stays, including bolts and nuts and securing ends of stays to wall or roof for fixing of 75 mm pipe, complete all as specified and directed.

PVC (SWR) floor trap, 75mm size, plain with grating including joining with solvent cement concrete 1:2:4, type B-1 (using 20 mm graded crushed stone aggregate) complete all as specified and as directed.

Kitchen Sinks with drainage board made of stainless steel 1 mm thick in kitchen or laboaratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including cantilever brackets of mild steel angle 35 mm x 35 mm x 5 mm, 32mm dia brass waste coupling, 32 mm dia PVC waste pipe (rigid quality) and connecting union to pipe overall size 915 mm x 460 mm, bowl size 410 mm x 330 mm x 160 mm, fixed in repair, complete all as specified and directed.

Angle cock, fancy type, cast copper alloy, screwed down, high pressure, with capstan head, screwed one end for iron pipeand other for PVC connmection and fixed 15mm bore, fixed in repairs, complete all as specified and directed. Make:- Jaquar, Prayag, Cera

Stop valves, cast copper alloy, fancy type, chromium plated (concealed type), with chromium plated wall flange, screwed down, high pressure, long shank and exposed part kit with fitting sleeve, operating lever concealed part, screwed both ends for iron pipe or for unions and fixed, 15mm bore, fixed in repairs, complete all as specified and directed. Make:- Jaquar, Prayag, Cera

Bib taps (fancy type), cast copper alloy, chromium plated with capstan head, screwed down, screwed for iron pipe or for brass ferrule and fixed, 15mm bore, fixed in repairs, complete all as specified and directed. Make:- Jaquar, Prayag, Cera

Grating round 100 mm dia of stainless steel, fixed in repair, complete all as specified and directed.

Grating round 150 mm dia of stainless steel, fixed in repair, complete all as specified and directed.

Pillar taps cast copper alloy with capstan head chromium plated fancy type screwed down high pressure with or without lettered 'HOT' or 'COLD' letter with long screwed shank and fly nuts, screwed for iron pipe 15mm bore pipe, fixed in repair, complete all as specified and directed. Make:- Jaguar, Prayag, Cera

Brass chromium plated shower rose 125 mm size with swivel joints, fixed in repair, complete all as specified and directed.

PVC low level cistern ‘white’ with inlet, 10 litre capacity, float valve including bracket with 32mm dia PVC pipe 600 mm long, fixed in repair, complete all as specified and directed.

PVC connection, 15 mm size, 600 mm long, with brass fly nut at both end, fixed in repairs, complete all as specified and directed.

PVC waste pipe of 32 mm dia, flexible for wash hand basin or urinals, fixed in repairs, complete all as specified and directed.

PVC waste pipe of 40 mm dia, flexible for wash hand basin or urinals, fixed in repairs, complete all as specified and directed.

Vitreous china squatting pan, ‘Orissa’ pattern, of size 580 mm x 440 mm white with integral foot rest complete including provision of cement concrete bedding and connection to trap, outgoing flushing pipe, anti syphonage pipe, CI trap 100 mm Bore of pipe etc, fixed in repairs, complete all as specified and directed.

Vitreous China wash hand basin white flat back of size 550mm x 400mm fixed on cantilever brackets of mild steel a 32mm dia brass waste coupling, pedestal type, fixed in repairs, complete all as specified and directed.

Vitreous China wash down water closet (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), fixing seat cover including connection to drain (or outgoing pipe, and to flushing pipe & antisyphonage pipe etc) with CP mild steel hinging device, fixed in repairs, complete all as specified and directed. Note :- Plastic seat cover shall be measured separately as supply only as considered under respective items.

Supply only Plastic water closet seat, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, complete all as specified and directed.

European type combination pattern WC, casket type christinna with mounted flushing cistern, PVC connection, seat cover and jointed to sewage pipe, fixed in repair, complete all as specified and directed. Make:- Jaguar, Prayag, Cera

PVC Jet for EWC complete set including 1 metre pipe, fixed in repair, complete all as specified and directed .

PVC unbreakable (square) wall mounted shelf with 500mm sides, fixed in repairs, complete all as specified and directed. Make: Prayag Cat No BEA - 47A or any other techno-commercially equivalent make as approved by GE.

PVC unbreakable corner shelf (3 piece set), fixed in repairs, complete all as specified and directed. Make: Prayag Cat No BEA - 44A or any other techno-commercially equivalent make as approved by GE.

Health faucet of superior quality ABS body, with 15 mm dia 1.25 m long flexible tube and wall hook including fixing, fixed in repair, complete all as specified and as directed.

Stainless steel soap dish fixed to wall, fixed in repairs, complete all as specified and directed.

Toilet Roll Holder fixed to wall, fixed in repairs, complete all as specified and directed.

Single Lever Basin Mixer with 450 mm long braided hoses, fixed in repair, complete all as specified and directed.

Towel Rack, 600 mm long with lower Hangers, fixed in repairs, complete all as specified and directed.

Wall mixer with 115mm long Bend pipe, connecting legs & wall Flange, fixed in repairs, complete all as specified and directed.

Towel Rail, 600 mm long, fixed in repair, complete all as specified and directed.

Aluminium (diecast) body hydraulically door closer regulated,designation No.3, universal type,sutable for door shutters of 851 mm to 1000 mm in width and weight between 61 to 80 Kg, fixed in repair, complete all as specified and directed.

Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty, fixed in repairs, complete all as specified and directed.

Taking down aluminium door shutter from frame exceeding 1.0 Sqm but not exceeding 2.0 Sqm and re-fixing in same opening after repair of parts such as clip, easing, rubber beads, greasing/ oiling and including replacement of components i.e. middle rail, top rail and handle complete with locking arrangement, replacement of floor door spring for smooth functioning complete all as specified and directed NOTE: The unit quoted rate deemed to include all spare part for smooth functioning of door and any claim won't be entertained on this account.

Aluminium door (powder coated) single leaf with anodized aluminium frame of section 47.62 x 44.45 x 1.88 mm thick, shutter with bottom & middle rail of section 100 x 44.5 x 2 mm thick and styles & top rail of section 85 x 44.5 x 1.56 mm thick with centrally locking arrangement with lock make of ‘GODREJ’ or ‘LINK’ 7 lever and floor door spring hydraulically regulated including jointing cleats, fixing of 02 Nos of 150mm long aluminium handle & 02 Nos of 150mm tower bolt and glazing with 5.5 mm thick ordinary plain glass including necessary fittings, fixtures & aluminium snap beads, fixed in repair, complete all as specified and directed.

Aluminum window (powder coated) with aluminum anodized frame of aluminum section 47.62 x 44.45 x 1.88 mm thick with shutters having styles & rails of aluminum section 47.62 x 44.45 x 1.62 mm thick including jointing cleats, glazing clips, rubber packing, aluminum snap beading, screws anodized aluminum fittings such as hinges, 02 Nos tower bolts, 02 Nos handles etc including 5.5 mm thick ordinary plain glass complete. Including providing and fixing aluminum chequered grill of anodized section of mesh 100 x 100mm of 08 mm dia of bar fixed to frame with 20x205 mm aluminum flat with screw, fixed in repair, complete all as specified and directed.

Aluminium partition frame work anodized frame of size 62.5 x 37 x 1.5 mm thick with bottom & middle rails of aluminium section 62.5 x 37 x 1.5 mm thick and styles, top of section 62.5 x 37 x 5.5 mm thickincluding jointing cleats, filled with 12mm thick pre- leminated partical board intrerior grade up to middle rail from bottom and 5 to 6 mm thick plain/ frosted glass in balance portion secured with aluminum fillet of size 20mm, including necessary fittings, fixtures, fixed in repair, complete all as specified and directed.

Aluminium grill Decogrill DG-117 with aluminium anodized/ powder coated mesh with Square tube (solid) 6 mm thick sheet, fixed in repair, complete all as specified and directed.

E-board Make: Everest, Design "Lake and Hill" of size 605 x 605 x 4mm thick white prelaminated set embossed reinforced designer ceiling board tiles of approved texture at all height laid on hot dipped galvanised iron imposed grid with 24mm wide T-section (White powder coated). The framework shall comprise of main runner made from 0.33mm thick GS sheet and of size 24 x 32x 300mm and soaced at 1200mm maximum centres securely fixed to structural soffits with hangers of 2mm dia GI wire to be fixed with approved rawl plugs, adjusters and screws. Flush fitting of 1200mmm long cross Tee (with double stiching) to be interlocked between main runners at 600mm centre to form 1200 x 1600 mm modules cross tee longer than 600mm to be supported independently. 600 x 600mm doubles to be formed by fittings 600mm long cross tee centrally between the 1200mm cross tee. Perimeter wall angle shall be of 0.45mm thick GS sheet of size 19 x 19 mm and 300mm long of white colour all as per manufacturers instructions, fixed in repair, complete all as specified and directed. Make of frame work: Armstrong or equivalent.

E-board Make: Everest, Design "Lake and Hill" of size 605 x 605 x 4mm thick white prelaminated set embossed reinforced designer ceiling board tiles of approved texture at all height laid on old / existing frame work all as per manufacturers instructions, fixed in repair, complete all as specified and directed.

Dismantling of AC corrugated or semi corrugated sheet including AC ridges as in roof or wall covering, complete all as specified and directed..

Asbestos cement corrugated sheet, 6 mm thick, fixed with ‘L’ type or ‘J’ type or cranked hook bolts, complete all as specified and directed.

Asbestos cement corrugated sheet, 6 mm thick, fixed with ‘L’ type or ‘J’ type or cranked hook bolts, complete all as specified and directed. [Expect sheet]

Asbestos cement two piece adjustable plain wing ridge, 6mm thick, fixed with ‘L’ type or ‘J’ type or cranked hook bolts, complete all as specified and directed.

Prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of colour having tensile strength of 550 Mpa, as in roof covering / cladding to wall fixed with welf tapping screws, fixed in repair, complete all as speified and directed .

Prepainted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of colour having tensile strength of 550 Mpa, as in roof covering / cladding to wall fixed with welf tapping screws, fixed in repair, complete all as speified and directed .

Dismantling of timber scantlings 40 sq. cm and over in unframed work in any position, complete all as specified and directed.

Second class hard-wood clean sawn in scantlings as in timber framed, complete all as specified and directed.

Second class hard-wood clean sawn in scantlings as in timber framed, complete all as specified and directed. [Expect timber]

Preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with creosote oil, complete all as specified and directed.

Framed work such as grills, gratings, etc.. with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, and similar work conforming to Fe-290 Gde-E-165, complete all as specified and directed.

Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, in repair, complete all as specifed and direcetd.

Hacking out old broken glass (any thickness, size, quality or description) from metal/ wooden frame, complete all as specifed and direcetd.

Sheet glass, 3mm thick, ordinary quality and glazing in squares not exceeding 0.5 sq. m in each pane with oil putty, complete all as specified and directed.

Sheet glass, 4mm thick, frosted on one side ordinary quality and glazing in squares not exceeding 0.5 sq. m in each pane with oil putty, complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and directed.

Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc, conforming to Fe 410-W (Gde- E- 250) quality-A, complete all as specified and directed.

Stainless steel drapery rod cut to size and fixed in position including brackets, 25 mm dia, fixed to wall, fixed in repair, complete all as specified and directed.

Cleaning of HDPE tank of capacity up to & including 500 Litres by flushing out water cleaning & removing of sludge, scale mud etc from wall & floor by rubbing with brushes, cleaning with caustic soda etc complete & finally washing with fresh water, including writing date of cleaning with white synthetic enamel paint and removing sludge, scale mud etc to a distance not exceeding 50 metre and depositing complete all as specified and directed.

Cleaning of HDPE tank of capacity exc 500 Litres but n exc 1000 ltrs by flushing out water cleaning & removing of sludge, scale mud etc from wall & floor by rubbing with brushes, cleaning with caustic soda etc complete & finally washing with fresh water, including writing date of cleaning with white synthetic enamel paint and removing sludge, scale mud etc to a distance not exceeding 50 metre and depositing complete all as specified and directed.

Mild Steel handle (left or right) for steel window of existing size including necessary welding / riveting etc. fixed in repair, complete all as specified and directed.

Spot welding in repair to butt hinges/ single action spring hinges/ double action spring hinges/ projecting type hinges/ box type hinges by welding the same to existing door frame/ mild steel window frame, 100/ 75mm size, complete all as specified and directed.

PVC Covers for PVC water tanks of capacity 500 litres /1000 Litres, fixed in repair, complete all as specified and directed.

Rubber Door Seal 32 mm wide with Aluminium strip of size 19 mm wide fixed with machine made steel screw with washer, fixed in repair, complete all as specified and directed.

Sink coupling of 40mm size complete all as specified and directed.

Brass mortice lock four lever vertical type of size 75 mm with all fittings for fixing in Aluminium door, fixed in repairs, complete all as specified and directed.

Vitreous china half stall urinal white bowl type (back or corner wall type), complete incl providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and incl 60 mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe incl fixing of waste coupling, fixed in repairs, complete all as specified and directed.

ACP panel as in wall panelling or cladding 3 mm thick of required colour, fixed on mild steel framing or grid of specified spacing fixed on face of walls or column by drilling hole with screw and joints of panels shall be sealed with silicon tape as per manufacturer instruction fixed in repairs complete all as specified and directed.

Ball bearing for rolling shutters, fixed in repair, complete all as speciifed and directed.

MDF board 18 mm thick, interior grade, prelaminated one side with decorative type lamination including wooden /pvc beading, fixed in repair, complete all as specified and directed.

Continuous (piano) hinges, mild steel, bright finish or electrogalvanised, width of flap 30mm, fixed in repair,complete all as specified and directed.

Aluminium alloy handles, fabricated type anodised of size 150mm, complete all as specified and directed.

Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections incl necessary packing, union and cap and fixed, 32mm bore, fixed in repair, complete all as specifed and directed.

Solid PVC Wall Panelling consisting of 3 mm thick Plain cover PVC Sheet incl solvent cement and fixing at site on PVC Frame including 3 mm thick PVC Sheet fillet of width 35 mm for wall paneling incl of fixing on to wall to PVC Frame as per specification and drawing, fixed in repair, complete all as specified and directed.

Peg set of six hooks chromium plated, fixed in repair, complete all as specified and directed.

R K GUPTA AND SONS

MOHAMMAD RIZWAN CONTRACTOR

Shivagya Engineering

KRISHNA BAHADUR

shweta constructions

Shivam Constructions

Mohit Enterprises

M/S ATUL CONSTRUCTION

M/S A P CONSTRUCTION