Resurfacing of 6 Percent Abadi plots roads in Village Patwari, Greater Noida.

Supplying and stacking at site. (DSR-18/16.3) 53mm to 22.40 mm size stone aggregate (DSR-18/16.3.3)

Supplying and stacking at site.: Moorum. (DSR-18/16.3.10)

Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road/vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate, watering and compacting to the required density . (DSR-18/16.4)

Providing and applying primer coat with SS1 grade bitumen VG-10 on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.75 kg/sqm using mechanical means. (MORTH 502)

Providing and laying dense graded bituminous macadam with Higher capacity batch type HMP using crushed aggregates of specified grading Premixed with bituminous binder VG-30 @4.5% by weight of total mix and filler, transporting the hot mix to work site, laying with hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve to desired compaction as per MoRT & H Specification CLAUSE No 505 complete in all respects (Morth/5.04/505(B))

40mm compacted thickness with bitumen peretration of [email protected]% by weight of total mix. (MORTH-/5.05/507(B))

Providing and applying primer coat with SS1 grade bitumen VG-10 on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.75 kg/sqm using mechanical means. (MORTH 502)

Providing and laying Bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder VG-30 @5.40 Percent of mix and filler transporting the hot mix to work site, laying with hydrostatic paver finisher with sensor control to the required grade, level, and alignment rolling with smooth, wheeled vibratory and tandem rollers to achive the desired compaction as per MORTH specification clause No 507 complete in all respects. (MORTH/5.05/507(B))

30mm compacted thickness with bitumen penetration of [email protected]% by weight of total mix. (MORTH-5.05/507(B))

Providing and laying of hot applied thermoplastic compound 2.5mm thick including reflectorising glass beads @250gms per sqm area, thickness of 2.5mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes, Rates are inclusive of all taxes, royalty etc. all T&P/machine material and labour required for proper completion of work. (SOR-2020/New item/Sr.No.19.01)