Supply, installation, testing and commissioning of electro-mechanical Components at water supply scheme Bagh-i-Mehtab of Jal Shakti (PHE) Mechanical Division Srinagar

Amount

Supply, installation, Testing and Commissioning of Horizontal pumping unit as per IS 1520 with following specification:- Pump:- Discharge : 15000 GPH Dynamic Head: 90 Meters Type :- Horizontal split casing Speed= 1440- 1500 RPM Material of construction 1.Impeller:- Stainless Steel/ Bronze/CF8M 2.Shaft:- SS410 3.Pump casing:- Cast Iron The pump shall confirm to IS-1520 code MOTOR :- A) Type :- Horizontal squirrel cage Induction Type B) Rating:- As per OEM. C) No of phases: 3 phase 415 V ± 10%,50 Hz, A C supply D) Winding:-Copper wound squirrel cage E) Type of enclosure:-TEFC F) Method of cooling:- Air cooled with fan mounted G)Method of Starting: star delta Manufactures Test Certificate to be appended Rest of Specification/Details are as per S. No. 1 of Technical Annexure A

Fabrication, Supply, installation, Testing and Commissioning of GI column pipe conforming to IS: 1239 of length 10 Rft into the collection SR up to the desired depth; The job includes Providing and welding of flanges conforming to IS: 6392, Table-17 and PN 16 rating Size: DN 150 Class: C (Heavy) Rest of Specification/Details are as per S. No. 2 of Technical Annexure A

Supply, installation, Testing and Commissioning of G.I Flanged Rising Main from WSS Kanipora to Baghi Mehtab OHT. The Pipe shall be hot dip Galvanized, class-C confirming to IS 1239. The job includes providing and fitting of M.S Flanges conforming to BIS 6392/1997 Table 17 (Rating PN16). Size: DN 150 Class: C (Heavy) Rest of Specification/Details are as per S. No. 3 of Technical Annexure A

Earth work in excavation by mechanical means (Hydraulic Excavator) in trenches for foundation, drains, pipes, cables (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and reaming of bottom lift up to 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed. (All kinds of soil 01 meter from cutting edge)

Filling available excavated earth in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by reaming and watering, lead up to 50 m and lift upto 1.5m.

Providing and laying of stone soling including manual compaction

Centring and shuttering including strutting, propping etc. and removal of form work for Foundation, footings, bases for columns

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. all work upto plinth level with 1: 2: 4 mixes (1 cement, 2 coarse sands, 4 graded stone aggregate 20 mm nominal size)

Fabrication, Supply, installation, Testing and Commissioning of washout Tee. The Tee shall be fabricated out of G.I pipe with M.S Flanges conforming to BIS 6392/1997 Table 17 (Rating PN16) fastened with weld joints on three ends. Size: DN 150 Class: C (Heavy) Rest of Specification/Details are as per S. No. 4 of Technical Annexure A

Supply, installation, Testing and Commissioning of, Ductile Iron double flanged, non-rising spindle soft seated glandless gate/ sluice valves as per BS 5163 part 1 and part 2 / EN 1074 Part 1 & 2 for regulating the water supply outside the pumping units. Rest of Specification/Details are as per S. No. 5 of Technical Annexure A Size: DN150 Rating: PN1.6/16

Supply, installation, Testing and Commissioning of Ductile Iron double flanged, Slanted seat swing check valve (NRV) as per EN 1074- Part -3 / BS 5153. Size: DN150 Rating: PN1.6/16 Rest of Specification/Details are as per S. No. 6 of Technical Annexure A

Providing, fitting, testing and commissioning of ARV (Air Release valve) as per EN 1074- Part -4 to be fitted to G.I rising Main. Size: 50mm Rating: PN1.6/16 Rest of Specification/Details are as per S. No. 7 of Technical Annexure A

Providing, Fabrication and fitting of Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. The drawings and Dimensions will be provided by Site in Charge at the time of execution of job Rest of Specification/Details are as per S. No. 8 of Technical Annexure A

Supply, Installation and testing of manual type triple Spur gear chain pulley block along with monorail geared travelling trolley of following specifications Capacity = 3 ton Lift: 6mtrs Rest of Specification/Details are as per S. No. 9 of Technical Annexure A

S/I/T/C of 11/0.433 KVA, 3 Phase Distribution Transformer with Bimetallic Terminal connectors Energy level -2 Aluminum wound Specifications conforming to IS: 1180 (Part 1) 2014 with latest amendments Rating: 100 KVA HT Transformer, 3 phase (Level 2). Manufacturers Test certificates be appended and Rest of Specification/Details are as per S. No. 10 of Technical Annexure A

Transformer Bed: The HT Transformer has to be erected on a transformer bed of size 2000x2000mm fabricated by welding out of 04 No’s of vertically grouted Mild Steel pipes of 100 MM diameter, including providing and fitting of Channel section ISMC- 100, 2000MM, resting of HT transformer. Rest of Specification/Details are as per S. No. 11 of Technical Annexure A

Providing and fitting G.I Channel of sizes including clamps Rest of Specification/Details are as per S. No. 12 of Technical Annexure A

Supply, Installation, Testing and commissioning of Polymeric Gang operated Air brake switch, outdoor type, triple pole, suitable for vertical installation, complete as per IS specs Rest of Specification/Details are as per S. No. 13 of Technical Annexure A

Supply, Installation, Testing and commissioning of 11KV polymer fuses Set Horn Gap Rest of Specification/Details are as per S. No. 14 of Technical Annexure A

Supply, Installation, Testing and commissioning of Gapless Surge arrestor station class Rest of Specification/Details are as per S. No. 15 of Technical Annexure A

Supply and fitting of 11 KV polymeric composite pin insulator as per S. No. 16 of Technical Annexure A

Supply, installation, errection of 9 mtrs long H.T steel tubular pole of specifications ST- 410 (sp-33) as per S. No. 17 of Technical Annexure A

P/F of Galvanized nuts, bolts of various sizes as per site requirement as per S. No. 18 of Technical Annexure A

P/F Danger Plate with clamps

Providing and fixing G.I Barbed wire for anti climbing/ anti climbing devices with clamps as per S. No. 19 of Technical Annexure A

Providing and fitting of Galvanized stay set complete as per S. No. 20 of Technical Annexure A

Providing and fitting of 0.50 ACSR conductor as per S. No. 21 of Technical Annexure A

Supply, Installation, Testing & Commissioning of 50 Sq mm XLPE Aluminum H.T cable (ABC type) of 11 KV grade with following specs. Size (cross sectional area in sq mm) = 3×50 with reinforced wire with messenger wire Phases: Red, Yellow, Blue Rest of Specification/Details are as per S. No. 22 of Technical Annexure A

Supply, Installation, Testing & Commissioning of 11 KV cable termination kit as per S. No. 23 of Technical Annexure A

Supply, Installation, Testing & Commissioning of LT Distribution box for HT transformer Capacity of transformer: 100 KVA Rest of Details/Technical specification as per S. No. 24 of Technical Annexure A

Supply, Installation, Testing & Commissioning of PRODIGY LT Metre of following specification complete with all fixtures required for fitment at site Rest of Details/Technical specification as per S. No. 25 of Technical Annexure A

Fabrication, Supply, Installation, Testing & Commissioning of modular control panel of appropriate size fabricated out of 14SWG sheet having required openings/vents and protection class: IP-55 and fitted with accessories MU-G75 and Rest of Details/Technical specification as per S. No. 26 of Technical Annexure A

Supply, Installation, Testing & Commissioning Manually operated copper wound, 3-phase, AC power supply multi step voltage stabilizer. Rating:75 KVA Manufacturers test certificate to be appended and Rest of Details/Technical specification as per S. No. 27 of Technical Annexure A

Providing and Fitting of 3.5/2-Core, XLPE Armored Aluminum Cable conforming to IS: 7089-part 1st as service line from the HT transformer to control Rest of Details/Technical specification as per S. No. 28 of Technical Annexure A

95 sqmm , 3.5core, LT cable

10 sqmm, 2 core, LT cable

Providing and fitting of 50 mm square single core copper cable for interconnecting various electrical gadgets as per IS 694: 2010 along with thimbling as per requirement as per S. No.29 of Technical Annexure A

Providing and Fitting of cable tray of 150mm size for carrying the cable inside the machinery room. Job includes P/F of geyser bolts, nuts washers etc. as per S. No. 30 of Technical Annexure A

P/I of earthing station for substation, LT panel, DG set and stabilizer comprising of company fabricated earthing electrode as per IS: 3043. Rest of Specifications/details are as per S. No. 31 of Technical Annexure A

Supply, installation of 6 kg co2 type fire extinguisher manufactured as per IS:15683 OF 2006 with IS mark and comply with DGMS(Approval). Rest of details as per S. No. 32 of Technical Annexure A

Illumination of Premises: Providing and erection of 9 Mtr long Hot Dip Galvanized octagonal pole (single Section) with bottom 150mm, top 75mm wide, thickness 3mm with 70 Microns Zinc coating having inside arrangement for providing of power connection along with following items. 1) 01 No MCB 16 Amp. 2POLE Rest of Details/Technical specification as per S. No. 33 of Technical Annexure A

Providing, installation, testing and commissioning of area lighting 120 Watt LED (Street Light Type) on top of octagonal pole Having following specs: Input: 90-240 V 50 Hz Power Factor: >0.9 Rest of Details/Technical specification are as per S. No. 34 of Technical Annexure A

Providing and installation of Junction Box with DP 32Amp MCB to serve as main switch for LED lighting. Rest of Details/Technical specification are as per S. No. 35 of Technical Annexure A

Providing, Installation and testing of 5KVA fully automatic voltage stabilizer. Rest of Details/Technical specification are as per S. No. 36 of Technical Annexure A

Supply, installation, Testing & commissioning of 1000VA Full Sine wave power inverter with 12V, 180AH Tubular inverter Battery Rest of Details/Technical specification are as per S. No. 37 of Technical Annexure A

Providing, laying & fixing with adhesive/bonding material of insulation rubber mats on the floor of the pump house, covering area around electro-mechanical machinery for safeguarding the life & limb of the workmen. Rest of Details/Technical specification are as per S. No. 38 of Technical Annexure A

TOOL KIT For Maintenance: - The Tool Kit for maintenance as per detailed specification as per S. No. 39 of Technical Annexure A

Providing of good quality convenience and utility items as per S. No. 40 of Technical Annexure A

Fabrication of 7’ (L) x 6’(B) x 1.5' (H) angle iron bed for operators with back-height of 2 feet. The detailed drawing will be provided by site incharge. (01 Nos) Rest of Details/Technical specification are as per S. No. 41 of Technical Annexure A

Providing and fitting of 19 mm thick multilayered ply to Ply sheet of size 6 x 3 feet, 03 nos. Rest of Details/Technical specification are as per S. No. 42 of Technical Annexure A

Providing of CP 12 5WP solar/ electrical lantern chargeable on both solar & electrical 220v supply. Rest of Details/Technical specification are as per S. No. 43 of Technical Annexure A

Providing of Foldable, Portable & Compact Aluminum Telescopic Ladder, EN131 Certified. Rest of Details/Technical specification are as per S. No. 44 of Technical Annexure A

Providing of Industrial Rubber 11 KV Electrical Hand Shock Proof Safety Gloves for handling electrical equipments/connections. Rest of Details/Technical specification are as per S. No. 45 of Technical Annexure A

Providing and fitting of 02 No. angle iron/sheet metal board duly painted showing various specifications of the mechanical and electrical equipments installed at site and the name of Water supply scheme size= 7x5 feet & 2x5 feet Rest of Details/Technical specification are as per S. No. 46 of Technical Annexure A

Providing and fitting of 200Ampere 4Pole Side operated OFF-Load Changeover Switch in Separate SS Enclosure as per S. No. 47 of Technical Annexure A

Electrification of Pump house including heating and lighting points as per S. No. 48 of Technical Annexure A

Providing, installation, Testing & commissioning of 415 ±10%V (output), 3 phase Diesel Generator set as per IS 8528 (2018) and ISO 3046 (2002) for engine and IEC/IS 60034-1 for alternator suitably assembled and fitted in a pollution free acoustic enclosure / canopy of required size as per Ministry of Environment protection rule 1986 read with latest amendments. Rating: 125KVA, Water Cooled. Manufacturers certificate to be appended & Rest of Specification/Details are as per S. No. 49 of Technical Annexure A

Providing and fitting of L. T 50 Sq. mm, 1 core, capable to work upto 1.1 KV, PVC insulated, galvanized steel strip armored copper cable conforming to IS: 7089(part -1) 1988 With latest amendments to be fitted from D.G Set to Modular control panel. Rest of Specification/Details are as per S. No. 50 of Technical Annexure A

Providing, Installation, Testing & Commissioning of complete switchgear unit for protection of D.G Set consisting of 200A MCCB 3- pole, 415 V, 50 KV breaking capacity. Rest of Specification/Details are as per S. No. 51 of Technical Annexure A

Providing/ fitting and installation of HI Rib Colour Coated GI Sheets of 0.50 mm for roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts etc. Rest of Specification / Details are as per S.No.52 of Technical Annexure A

Providing/ fitting and installation of Ridge of 90 cm wide overall in colour coated sheets fixed with polymer coated J. or L. hooks, bolts and nuts 8 mm dia etc 0.50mm thick. Rest of Specification/Details are as per S. No. 53 of Technical Annexure A