REPAIRS MAINTENANCE OF BUILDING AND INTERNAL SERVICES AT AKASH VIHAR AND CLEANING OF

Amount

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Demolition of PCC of any description and in any position as in sunken floor complete all as specified and as directed.

Taking down cement plaster any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed.

M & L for non skid ceramic coloured tiles 7 to 8mm thick square/ rectangular, size of tile 300 x 300 mm or above, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L of Non-skid Ceramic joint free tiles coloured shade size 600 x 600mm, 7 to 8 mm thick in (Squre / Rectangular) polished, area of each tiles not exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc. set and jointed in neat cement slurry of 3kg/sqm and pointed in white or coloured cement match complete incl hacking existing floor for proper bonding of tiles, etc., complete all as specified and as directed.

M & L for screed bed for bedding layer of mortar 15 mm thick for laying floor finishes in cm 1:6 complete all as specified and as directed.

Material and labour for glazed ceramic tiles 450x 300 x 7 mm jointed in cement slurry and pointed in white or coloured cement to match as in dados/skirting complete all as specified and as directed.

M & L for rendering 10 mm thick in cement mortor 1:3 on fair faces of brick work or concrete surfaces complete all as specified and as directed.

S&F in repairs Vitreous China White Squatting Pan, ‘ORISSA’ Pattern of size 580x440 mm with Integral Foot Rests, ‘P’ or ‘S’ Trap, providing Joints between Flush Pipe and Socket of WC Pan and fixed-in-repairs, complete all as specified and as directed.

Supply and fix in repairs vitreous china wash down water closet pan (Pedestal pattern) white, fixed in repairs (excluding fixing bolts, flushing cistern and pipe) including taking down complete all as specified and as directed.

Supply and fix plastic water closet seat cover any colour, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device, fixing in repairs complete all as specified and as directed.

S & F in repairs PVC valveless, syphonic action type flushing cistern 10 ltr capacity low level white with inlet ballvalve float and handle including brackets and flush pipe of polyethylene of density of PVC 32 mm for low level cistern etc complete all as specified and directed.

S&F in repair wash hand basin of size 550 x 400 mm vitrous China white flat back including brackets, waste coupling & PVC waste pipe of 32 mm dia etc. complete all as specified and directed.

S&F PVC connection 15mm size with PTMT Nuts of length 60cm and fixed-in-repairs, complete all as specified and as directed.

Supply and Fixing in repairs health faucets Chromium plated (hand shower) with 8mm dia , 1.50m long flexible hose, wall hook fixed with brass screws and all accessories complete all as specified and directed.

S & F in repairs 15mm bore Pillar taps, cast copper heads, capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and as directed.

S & F in repairs bip taps 15mm chromium plated cast copper alloy with crutch or butterfly handle, screw down for iron pipe or for brass ferrule complete all as specified and as directed.

S&F in repairs two in one Bib tap cast copper alloy chromium plated 15mm dia with fancy type screwed down screwed for iron pipe or brass ferule etc complete all as specified and as directed.

S & F in repairs stop valves 15mm , cast copper alloys, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or unions complete all as specified and as directed.

S&F in repairs Brass CP mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and directed.

S&F in repairs , brass chromium plated shower rose 125mm size complete all as specified and as directed.

M & L PVC floor trap with grating including jointing with solvent cement, 75 mm dia outlet complete all as specified and as directed.

Taking up or down steel tubing and connections, 15mm bore complete all as specified and as directed.

Taking up or down steel tubing and connections, 20mm bore complete all as specified and as directed.

S & F 16 mm bore CPVC pipes SDR 11 & plain CPVC SDR11 fittings on walls and ceiling or laying in floors, with all fittings complete all as specified and as directed.

S & F 20 mm bore CPVC pipes SDR 11 & plain CPVC SDR11 fittings on walls and ceiling or laying in floors, with all fittings complete all as specified and as directed.

Taking down chowkhat with shutter (without taking off shutter from the frame)n. exc. 1.5 Sqm each complete all as specified and as directed.

S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube and fixing in opening as per specifications & drawings complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC `C’ channel having a PVC sheet strips of 20mm width stuck inside with solven cement for styles and plain colour PVC sheets for top rain lock rail and bottom rail on either side and as gap insert for top rail and bottom rails, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles and rails with suitable PVC sheet bedding and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawing complete all as specified and as directed.

S & F butt hinges 125mm size extruded aluminium alloy with galvanised mild steel hinge pin,anodised,complete all as specified and as directed.

S & F in repairs aluminium handles 150 mm size cast type anodised complete all as specified and as directed.

S & F Aluminium anodised bolts barrel tower bolts 200 mm long of extruded section complete all as specified and as directed.

Taking down rainwater pipes (any size or pattern) including all fittings, heads, shoes, bends etc complete all as specified and as directed.

Supply and fix PVC (SWR) pipes single socketed 75 mm bore fixed in walls/Sunken floor complete all as specified and as directed.

Supply and fix PVC (SWR) bends 75 mm bore of any radius complete all as specified and as directed.

Supply and fix PVC (SWR) door Tee of size 75 mm complete all as specified and as directed.

Hacking out old broken glass ( any thickness, size, quality or description) from metal frame frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones including supply and fix 4mm thick sheet glass ordinary quality in square or n. exc 0.5 sqm each pane up to 4th floor complete all as specified and as directed.

Hacking out old broken glass ( any thickness, size, quality or description) from metal frame frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones including supply and fix 4mm thick sheet glass ordinary quality in square or n. exc 0.5 sqm each pane above 4th floor complete all as specified and as directed.

Demolition of brickwork or stone/ boulder masonry, built in cement mortar , incl all quions, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and as directed.

Material and labour for Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width Type C1, 1:3:6 (20 mm graded aggregate ) and setting in mortar CM 1:6 but except Blocks etc. complete complete all as specified and as directed.

Material and labour for Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width Type C1 1:3:6 (20 mm graded aggregate ) and setting in mortar CM 1:6, complete all as specified and as directed.

Material and Labour for PCC (1:2:4) type B1 using 20 mm graded stone aggregate as in coping, mud stops, benching, water tank platform etc.on roof, chajja weathering, slightly rounded or chamfered angles and throating etc. including necessary form work complete all as specified and as directed.

Material and Labour for PCC (1:2:4) type B-0 using 12.5 mm graded stone agg as in padding over roof for filling depression and making proper slope complete all as specified and as directed.

M & L for rendering 5mm thick cement plaster in cm 1:3 on ceiling including finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 10 mm thick in patches in cement mortar 1:6 on other than fare face of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement complete all as specified and as directed.

M&L for rendering 15mm thick in patches in cement mortar in 1:4 on fare face of brick work or concrete surfaces even and smoothe without using extra cement & with using integral water proofing compound complete all as specified and as directed.

M&L for preparation of new surface/undecorated surfaces surface of ceiling and applying three coats of white washing complete all as specified and as directed.

M&L for preparation of new surface/undecorated surfaces of walls and applying two coats of Oil bound distemper over a coat of priming on plastered and other surfaces with alkali resistant priming paint complete all as specified complete all as specified and as directed.

M&L for preparation of new surface/undecorated surfaces of walls and applying two coats of Cement Base Paint of approved tint over a coat of priming on plastered and other surfaces with alkali resistant priming paint complete all as specified and as directed.

S&F in repair galvanised mild steel wire cloth, 0.63 mm nominal dia of wire and average width of aperture 1.40 mm dia and fixed with tinned tacks or galvanised wire staples, complete all as specified and as directed.

Removing demolished material exc 1.5 KM but n.exc 5 KM and depositing where directed at a level n.exc 1.50 M above the starting points complete all as specified and as directed.

S&F in repairs sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm , bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

Cleaning and removing all scale and dirt, etc from tanks and from mouths of circulating pipes etc exc 250 liters and not exc 500 liters and writing date of cleaning with white paint on each tanks complete all as specified and as directed.

Cleaning and removing all scale and dirt, etc from tanks and from mouths of circulating pipes etc exc 500 litres and not exc 1000 litres and writing date of cleaning with white paint on each tanks complete all as specified and as directed.

S&F in repairs rotational moulded polythylene water storage tanks 500 ltrs capacity (cylindrical or vertical with closed top) hoisted and fixed in position, complete all as specified and as directed.

All as per item No.56 above, but, 1000 Ltrs capacity complete all as specified and as directed.

S&F stainless steel plate rack for kitchen of approved make and size all as directed and as specified (Size - 900x600x200mm) complete all as specified and as directed.

Material and Labour for cleaning of sewer lines from Manhole to Manhole of any depth and dia of pipe including testing sewer line by pouring water complete all as specified and as directed.

Cleaning of Manhole upto 2m depth , any size and including taking out sludge, sewer water, any other materials etc and disposal of the same outside MD land complete all as specified and as directed. Note:- Payment of blockage shall be paid again to the manhole if the blockage occurs after the interval of 1 month.

Cleaning of Manhole exc 2m depth but not exc 4m depth, any size and including taking out sludge, sewer water, any other materials etc and disposal of the same outside MD land complete all as directed . Note:- Payment of blockage shall be paid again to the manhole if the blockage occurs after the interval of 1 month.

Excavation in trenches for exposing the sewage line and breaking SGSW pipe horizontally on top to help cleaning the sewer line from Manhole to the location where the SGSW pipe is broken and covering the broken portion of SGSW pipe from the top and sealing the opening in CM (1:3) including returning filling and ramming in trenches with excavated earth and disposal off surplus earth to a distance not exceeding. 50 m complete all as specified and as directed. (irrespective of depth and type of soil).

Cleaning blockages from Nahani trap to Gully trap by Roding etc and cleaning the sludge from NT taking up and refixing the grating in CM (1:3) including testing by pouring the water until smooth flow, complete all as directed by Engineer-in-charge. Note:- Payment of blockage shall be paid again to the manhole if the blockage occurs after the interval of 15 Days.

Cleaning of blockages from Gully trap to 1st Manhole length of sewer line not exceed 5m by roding etc and cleaning all sludge from Gully trap to 1st Manhole including pouring water until the smooth flow and necessary earth work and disposed of sludge etc complete all as directed. Note:- Payment of blockage shall be paid again to the manhole if the blockage occurs after the interval of 15 Days.

Cleaning blockages from water closet including cleaning the soil pipe (for 1St and 6th floor) by removing the access door cover in the bend and refixing it after cleaning the pipe, pouring water until smooth flow including necessary earth work and making good damages if any to plinth protection Manhole etc., all as directed. Note:- Payment of blockage shall be paid again to the manhole if the blockage occurs after the interval of 15 Days.

Demolition of existing SWSG gully trap including PCC kerb etc and supply and fix SWG gully trap square mouthed 100mm size set in PCC (1:3:6) type C1 block measuring 450mm and 100mm thick bed concrete and jointing to drain pipe in CM (1:1) including 100x150mm high PCC kerb in (1:2:4) type B1 with CI perforated grating 150x150mm bituminous coated including disposal of waste/sludge complete all as directed.

Demolition of PCC around floor trap and dismantling existing floor trap and cleaning the blockage of pipe from floor trap to gully trap and supply and fix PVC floor/Nahani trap in existing pipe and embedding in CM (1:1) including lowering or raising with vertical piece with PVC pipe for jointing trap and fixing gratings at true level of floor complete all as directed.

Removing / Bailing of sewage water the septic tank of various capacities and disposal outside MD land including cutting and removing all vegetable growth plants etc in around septic tank and filter bed etc and removing debris outside MD land complete all as specified and as directed.

Removal of sludge/disposal/sediment from septic tank of various capacities and disposal the same outside MD land including cutting and removing all vegetable growth plants etc including uprooting of small plants around septic tanks and filter beds and etc and removing debris outside MD land complete all as specified and as directed.

Removal / taking out of sludge muck consisting of loose aggregate sediments mud etc from filter bed and refilling the same after cleaning/washing into the filter bed complete all as specified and as directed.

Excavation in trenches not exceeding 1.5m wide and n. exc. 1.50 mtr deep and getting out in hard/dense soil complete all as specified and as directed.

All as per item No 71 above, but , exceeding 1.5 m deep and not exceeding 3.00 m deep complete all as specified and as directed.

Returning, filling in including spreading, leveling watering and well ramming in layers not exceeding 25cm thick complete in hard/dense soil complete all as specified and as directed.

Removing excavated soil to a distance exceed 50 m and not exceeding 100 m and depositing where directed at level not exceeding 1.50 m above the starting point complete all as specified and as directed.

Demolition and breaking up drain pipe (salt glazed stone ware) set in Cement Mortar, 150mm bore and getting out from trenches complete all as specified and as directed.

Cutting into existing Manhole for connecting new drains, making good to pipe and rendering, cutting out existing benching and forming branch channel (1/2 round or 3/4 section) in cement concrete PCC (1:2:4) type B1, smooth finished and reforming benching as required internal dia of pipe 150mm complete all as specified and as directed.

Material and Labour for 150mm bore salt glazed stone ware drain pipes laid in trenches and jointed in CM (1:1) and tested complete all as specified and directed

Material and Labour for PCC (1:3:6) type C2 for bed to drain pipes 150 mm bore including packing under and haunching against the sides of pipes after they are laid and tested, complete all as directed.

Material and Labour for brick work with sub class ‘B’ bricks in CM (1:6) straight or curved on plan exc 6m mean radius etc complete all as specified and as directed.

Material and Labour for forming fair finish to channel in manholes using extra cement complete all as specified and as directed.

Material and Labour for PCC (1:3:6) of thk 100mm , type C2 using 40mm graded stone aggregate in foundation complete all as specified and as directed.

Demolition of concrete(reinforced) of any description and in any position not otherwise speifically provided complete all as specified and as directed.

Material and Labour for pre cast cover slab using PCC (1:2:4) type B1 and set in CM 1:6 with top surface finished even & fair complete all as specified and as directed.

M&L for form work to sides of concrete foundation, footings, bases of columns, rafts & rafts beams, sides & soffits (if any) of foundation & plinth beams; & similar work; vertical or to batter fair finished surface complete all as specified and as directed.

Material and Labour for TMT bars 10 mm dia and over cut to length bent to shape required including cranking bending spirally or hoping for columns, hooking ends & binding with and including MS wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Supply only water proofing compound complete all as specified and as directed.

sri sai construction