SPL REPAIR OF BLDG NO H-06 AT VRG LINE COD KANPUR UNDER GE (I) KANPUR AT KANPUR CANTT

Demolition of plain cement concrete in ground floor and pavings not exc 15cm thickness below or above ground level complete all as specified and directed.

Taking down or shutter (chowkats without taking off shutter from chowkats) area n.exc 1.5 Sqm each complete all as specified and directed.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) area exc 1.5 Sqm and not exc 4 Sqm each complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of decorative type/wood grain printed colour of size 50 X 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length ccomplete all as specified and directed. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

All as per item No. 5.00 above but size 65 x 125 mm complete all as specified and directed.

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type/wood grain printed colour flush door shutter of size 35 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade),calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moistureproof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed.

S&F for Factory made solid panel PVCdoor shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded decorative type/wood grain printed colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain printed PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; wire gauzed i.e. panel will be of wire gauze in lieu of wood grain printed PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly of wood grain printed colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (900) used instead of exposed portion of PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified and directed.

S&F 200mm stainless steel fancy handle of approved make fixed with SS screws etc complete all as specified and directed.

S&F 200 mm stainless steel barral tower bolt of extruded section complete all as specified and directed.

S&F 300 mm Stainless steel sliding door bolt with hasp and staple (bolt type) including fixing with necessary accessaries complete all as specified and directed.

S&F 300mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F 75mm long aluminum anodised extruded type door stopper of double legged with rubber shoes in bottom complete all as specified and directed.

M&L Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing, conforming to Fe 410 W (Gde-E-250) quality A complete all as specified and directed.

S&F 1.25 mm thick mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including, steel gates and similar work, cut size, holes punched; including round headed screws, and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded , including bending or turning up, mitred angles, etc. as required. complete all as specified and directed.

S&F hold fast of flat iron 25 x 3 mm complete all as specified and directed.

Dismantling of boarding, any descripsion, fixed in any position with nails complete all as specified and directed.

M&L 19mm thick coloured MDF board prelaminated both side as in kitchen cabinet, almirah shutter including side lipping etc complete all as specified and directed.

All as per item No 18.00 above but in shelf and partition etc complete all as specified and directed.

M&L 100mm size stainless steel hinges auto close type complete all as specified and directed.

M&L 125mm size stainless steel handles complete all as specified and directed.

S&F powder coated aluminium three track panels sliding window, shutter glazed and gauged of stainless steel wire cloth nominal dia of wire 0.36mm and average width, of aperture 1.40mm along with aluminium section with 50 micron anodizing size of frame 100mm x 25mm x 16 gauge, size of shutter, top bottom and side rail 19mm x 38mm x 16 gauge aluminium section with 50 micron anodizing and 5mm thick / tinted sheet glass to be fixed on glazed portion and necessary jointing cleats, glazing clips, rubber packing attached aluminium snap beading, screws anodized aluminium fitting such as suitable handle & auto locking arrangement etc complete all as specified and directed.

S&F aluminium grill of mesh size 65 x 75mm of 6mm dia aluminium bar fixed with 'Y' or 'H' aluminium sec complete all as specified and directed.

M&L solid PVC frame (single rebated) of size 60 mmx 30 mm made out of solid pvc foam with homogenous fine cellular structure having smmoth outer integral skin with suitable metal stifner and fixed with 100x8 sheet metal CSK screws complete all as specified and directed.

M&L factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded but Single Side Prelam PVC sheet used instead of Plain colour PVC sheet and stile & rails having one side feathered edge and on other side 10mm 90 degree bent edge 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement complete all as specified and directed.

S&F 100mm size mild steel, butt hinges, medium weight, cold rolled and fixed with mild steel screws complete all as specified and directed.

S&F 200mm long barrel tower bolt of aluminium extruded section complete all as specified and directed.

S&F 150mm long handle of aluminium extruded section fabricated anodized type complete all as specified and directed.

S&F 100mm long handle of aluminium extruded section fabricated anodized type complete all as specified and directed.

S&F in repairs 25 mm dia MS powder coated decorative finish conduit as in curtain rod and fixed to brackets complete all as specified and directed.

S&F in replacement MS brackets suitable for 25mm dia cutain rod fixed with screw and gutties in wall as approved complete all as specified and directed.

Dismantling wall or ceiling boards (fibre, pulp insulation etc) any thickness & at any height including fittings/grids etc complete all as specified and directed.

Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of size 595 x 595 mm of approved texture with semi perforated 12mm thick micro tegular edged GRG false ceiling tiles, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRCO.50 to 0.75 as per IS 8225 : 1987, Noncombustable as per BS 476 (part 4) - 1970 and light reflectance of 85% (minimum) including and to be laid in true horizontal level suspended on interlocking metal T-Grid of not dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15 x 32 mm of length 3000mm, cross-T of size 15 x 32 mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600 mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @80 grams per sqm) i.e. 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L-shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24 x 24 x 0.40mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications complete all as specified and directed.

Dismantling of asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings including ridges complete all as specified and directed.

Dismantling of unframed work timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed.

All as per item no 35.00 above but in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section framed work complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

M&L Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe 410 W (Gde-E-250) quality A complete all as specified and directed.

S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes with riveted, bolted or welded attachment etc incl mild steel screw bolts (machine made) with hexagonal or square heads at one end & washers as reqd conforming to Fe 410W .Gde-E-250, quality-A complete all as specified and directed.

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws of required size and dia complete all as specified and directed.

S&F Pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws of required size and dia complete all as specified and directed.

S&F wind ties for roof including securing bolts as directed, including all necessary drilling, bolting or riveting, etc. and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

M&L for PCC type B0 (1:2:4 using 12.5mm graded stone aggregate) as in roof kerb, benching/ padding over roof surface including chamfered on eges etc complete all as specified and directed.

Demolition of unreinforcement cement concrete of any description and in position not otherwise specifically provided for complete all as specified and directed

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed. (Note : Debris obtained from dismantling will be dispossed off as directed)

Demolition of stone slabs and tiles of any description or thickness in floors, approns etc laid, bedded and pointed in any mortar complete all as specified and directed. (Note : Debris obtained from demolition will be dispossed off as directed)

Demolition of brick work of any description and in any position built in cement mortar including quoins arches and pillars complete all as specified and directed.

M&L for brick work with fly ash old size bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:4 for manholes, drains, septic tanks, soak wells etc. complete all as specified and directed.

Cutting openings, through cement mortar brick walls for door, window/ventilar and other openings or enlarging existing openings, converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc to store and rubbish not exc. 50m complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in copings, kerbs, filling for fixing of hold fast etc including necessary formwork etc complete all as specified and directed.

M&L 25mm thick PCC (1:2:4) type B0, (using 12.5mm graded stone aggregate) as in floor to receive tiles complete all as specified and directed.

M&L 75 mm thick Cement concrete type D 2, 1:4:8 (using 40 mm graded crushed stone aggregate) as in sub base complete all as specified and directed.

M&L for non skid joint free ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the suraface over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

All as per Item No 53.00 above but as in skirting over and including 10 mm thick rendering in CM (1:4) complete all as specified and directed.

M&L for non skid joint free ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.18 sqm but not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the suraface over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

All as per Item No 55.00 above but as in skirting over and including 10 mm thick rendering in CM (1:4) complete all as specified and directed.

M&L for glazed ceramic tiles coloured, joint free in vertical surface 300X 450X 7mm thick mm thick as on walls over and incl 10mm thick rendering in cement mortar (1:4) and jointing in neet slurry and pointing in coloured cement to match the inside of tiles complete all as specified and directed.

Material and labour for 16 to 18 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms/slabs and like laid over 15mm thick screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite half round on exposed projected surfaces complete all as specified and directed.

M&L for non skid coloured heavy duty parking tiles of size 300x300x9-10 mm thick impact resistance over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for 50mm thick cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) in floor finished even & smooth with using extra cement complete all as specified and directed.

M&L 75 mm thick PCC (1:3:6) type C1(using 20 mm graded stone aggregate) as in plinth protection and paving laid in alternate bays finished finish even and smooth wihtout using extra cement complete all as specified and directed.

Taking down cement plaster on bricks including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M&L 15mm thick rendering in cement mortar 1:6 on brick or concrete surfaces of wall even and smooth complete all as specified and directed.

M&L 15mm thick rendering in cement mortar 1:4 on brick or concrete surfaces, mixed with water proofing compound as per manufacturer's instructions, surfaces finished even and smooth complete all as specified and directed. Note:- WPC measured and paid separately.

M&L 15mm thick rendering in cement mortar 1:4 on brick or concrete surfaces of wall finished even and smooth complete all as specified and directed.

Supply only integral water proofing compound ISI Marked complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying two coats of oil bound distemper on surfaces of wall over and including a coat of primer complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying two coat of cement based paint of approved shade on plastered surfaces of wall complete all as specified and directed.

M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over and including a coat of red oxide & over 10cm width or girth complete all as specified and directed.

M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over and including a coat of red oxide n.exc 10cm width or girth complete all as specified and directed.

M&L preparation of old steel surfaces of any description over 10 cm width or girth and apply two coats of synthetic enamel paint complete over truss, purlin etc complete all as specified and directed.

M&L for Cutting chases, pinning in. making good to facings for concealed water tubing n exc 10cm grith amd making good with cement mortar 1:3 complete all as specified and directed.

Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

Refixing only old 15 mm bore steel tubing and connections in new or old position (walls, ceiling, floors, etc) complete all as specified and directed.

S&F 15 mm bore galvanized steel tubes medium grade with all fittings laid concealed/surface in walls complete all as specified and directed.

Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

Refixing only of old 20 mm bore steel tubing and connections in new or old position (walls, ceiling, floors, etc) complete all as specified and directed.

S&F 20 mm bore galvanized steel tubes medium grade with all fittings laid in walls complete all as specified and directed.

Dismantling PVC water tanks of capacity exc 250 ltr but n exc 500 ltr and removing to store complete all as specified and directed.

S&F HDPE triple layer rotational moulded polyethylene water storage tanks in white colour (cylindrical vertical with closed top) 500 litres capacity hoisted and fixed in position all as specified in SSR Pt-I including for hoisting into position either inside or outside of building, connecting up pipes, securing access cover etc including GI nipple of suitable size complete all as specified and directed.

S&F in repairs ball valve high pressure of PTMT with epoxy coated aluminum rod and high density plastic ball screwed for iron pipe and fixed 20mm bore complete all as specified and directed.

S&F in repairs 15mm dia of bore Gun - metal globe or gate valves with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repairs 20mm dia of bore Gun - metal globe or gate valves with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repairs stainless steel sink with drainage board made out of 1 mm thick stainless steel sheet for kitchen and fixed with plugs, washers and waste pipe including fixing on cast iron cantilever brackets and connecting union to pipe over all size 1000 x 510 mm and bowl size 460x410x200 mm complete all as specified and directed.

S&F plate rack made out of 1mm thick stainless steel of size 750 mm x 650 mmx 250 mm fixed to wall with chromium plated brass spacers 30 to 50mm size, including all internal fittings of plate rack complete all as specified and directed.

S&F in repair vitreous china WHB white flate back size 550x400mm complete all as specified and directed.

S&F 600 mm x 450 mm bevelled edge mirror, mounted on 6 mm thick plywood and fitted to wooden plugs with CP brass screws and cup screws including taking down old unserviceable mirror complete all as specified and directed.

S&F in repair vitreous china squatting pan 'Orrisa pattern' size 580x440mm white with integral foot rests any pattern and making connection with & including CI P/S Trap, etc complete all as specified and directed.

S&F in repair of PVC low level flushing cistern white 10 Ltrs capacity with inlet 15mm bore ball valve, float and handle incl brackets, incl PVC connection 300mm with flanges at both ends screwed down to 15mm bore pipe and 32mm bore PVC flush pipe of required length complete incl taking out of existing flushing cisterns complete all as specified and directed.

S&F in repairs Chromium plated brass soap dish/ tray fixed with wall complete all as specified and directed.

S&F in repair 15mm bore CP fancy type long body bib tap with capstan head complete all as specified and directed including flange.

S&F in repair 15mm bore CP fancy type short body bib tap with capstan head complete all as specified and directed including flange.

S&F in repair stop valve concealed type 15mm bore of cast copper alloy,fancy type of CP with long shank and cup,high pressure screwed both ends for iron pipe or unions and fixed complete all as specified and directed.

S&F in repair Angular stop cock 15mm bore chromium plated screwed down high pressure with capstan head and flange complete all as specified and directed.

S&F in repairs pillar taps fency type (ISI marked) cast copper alloy cp with capstan head, screwed down high pressure with or without lettered HOT or COLD with long screwed shanks and fly nut screwed for iron pipe of 15mm bore complete all as specified and directed.

S&F in repair brass chromium plated shower roses with or without swivel joints, 125mm size, including fixing to steel pipe or union complete all as specified and directed.

S&F in repair brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges incl brackets complete all as specified and directed.

S&F in repair stainless steel gratings suitable for 100 mm floor trap complete all as specified and directed.

S&F in repair stainless steel gratings suitable for 75 mm floor trap complete all as specified and directed.

S&F in repair PVC waste pipe 32/40mm dia suitable for Sink/Urinal etc complete all as specified and directed.

S&F in repair PVC connection 450mm long brass chucknut bolt ends for fixing 15mm dia pipe complete all as specified and directed.

Dismantling of 75 to 100 mm dia cast iron or reinforced concrete drain pipes incl bends etc, jointed in cement mortar and taking out of trenches, if required complete all as specified and directed.

S&F 75 mm bore cast iron soil, waste and vent sand cast pipes in any length with or without ears, with cement joints, laid in floor/trenches or in floors complete all as specified and directed.

S&F 100 mm bore cast iron soil waste & vent sand cast pipes in any length with or without ears, with cement joints, laid in floor/trenches complete all as specified and directed.

S&F 75 mm bore cast iron soil waste & vent sand cast pipe in any length with or without ears, with cement joints, fixed on walls with MS flat iron clamps size 50 x 6mm and 16mm dia round bar stay of required shape and size inclduing drilling holes and embedded in CM 1:3 surface finished complete all as specified and directed.

S&F 100 mm bore cast iron soil waste & vent sand cast pipe in any length with or without ears, with cement joints, fixed on walls with MS flat iron clamps size 50 x 6mm and 16mm dia round bar stay of required shape and size inclduing drilling holes and embedded in CM 1:3 surface finished complete all as specified and directed.

S&F 75 mm bore cast iron bend (any radius) diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

S&F 100 mm bore cast iron bend (any radius) diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

S&F 75 mm bore cast iron branch pieces, single (equal or unequal ), ordinary or inverted ( spigot or socket type ) or with parallel branches complete all as specified and directed.

S&F 100 mm bore cast iron branch pieces, single (equal or unequal ), ordinary or inverted (spigot or socket type ) or with parallel branches complete all as specified and directed.

M&L in repairs PVC (SWR) floor trap 75 mm outer dia, plain with grating including jointing with solvent cement complete all as specified and directed.

M&L in repairs PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

S&F in repairs cast iron tee for 110 mm bore pipe complete all as specified and directed.

S&F in repair 100mm bore cast iron vent cowl complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting, bell, bell push etc and making good disturbed surfaces of walls, floor to match with existing specification complete all as specified and directed.

Material and labour for point wiring with 1.5 sqmm single core PVC insulated unsheathed cable 1100 volt FRLS grade ISI marked with multistranded copper conductor drawn through and including concealed conduit in / on wall/ceiling with provision of 1.5 sqmm single core cable green in colour PVC insulated copper conductor as earth continuity conductor connected to earth dully for following:- a). One light point controlled by one 05 Amps switch.

All as per item No 116.00 above but for one socket out let 2in1 5 and 15 Amps with 2.5 Sqmm PVC insulated copper conductor and provn of 2.5 sqmm PVC insulated single core copper cable green in colour as earth continuity conductor complete all as specified and directed.

All as per item No 116.00 above but One socket out multi pin 5 Amps controlled by one switch on independant board complete all as specified and directed.

All as per item No 116.00 above but One socket out multi pin 5 Amps controlled by one switch on same board complete all as specified and directed.

All as per item No. 116.00 above but for bone light point controlled by 02 nos two way switches complete all as specified and directed.

M&L for switch modular type single pole one way 1 module 6 amps 240 volts complete all as specified and directed.

Switch modular type one way 1 module 16 amps 230 Volts complete all as specified and directed.

S&F modular bell push 6 A 1 module 230 volts complete all as specified and directed.

M&L for socket 6 amps modular type 2/3 pin combined 2 module , 230 volts complete all as specified and directed.

M&L for socket modular type , 2/3 pin, 6 and 16 amps combined 2 module, 230 volts complete all as specified and directed.

S&F modular switch 2 way 6 A 6 A 1 module 230 volts complete all as specified and directed.

Supply and fixing in replacement fan regulator electronic, Modular step type hum free suitable to control speed of fan from 0 to 100% and connecting electrically all as required complete all as specified and directed.

M&L in replacement for submain wiring with two single core PVC insulated flexible copper conductor multistranded cable (FRLS) of size 4 sqmm with proper color coding and one single core PVC insulated flexible copper conductor multistranded cable green colour of size 4 Sqmm as earth lead in & including concealed PVC conduit medium grade 25mm dia cutting chases to walls for laying conduit and making good the disturbed wall surfaces to match with existing specification complete all as specified and directed.

All as per item No 128.00 above but for cable of size 6 sqmm and one single core PVC insulated flexible copper conductor multistranded cable green colour of size 6 Sqmm as earth lead in & including concealed PVC conduit complete all as specified and directed.

M&L for ceiling rose surface bakelite 3 terminals complete all as specified and directed.

S&F for Bell Electric heavy duty DING DONG Type 230 volts single pole complete all as specified and directed.

S&F Lamp holder insulated body with back plate for dome batten fittings complete all as specified and directed.

Supply and fixing Emergency LED Lamp solution gets Autometically switched on during a power cut and runs effictively on 04 hours power factor more than 0.9 protection glass IP 20 bulbs 12 watt complete all as specified and directed.

Supply and fixing Internal side LED lAMPS Come with an advanced lighting solution that offers more brightness and saves 80% more energy than than the tradiotational incandascent Power factor more than 0.9 protection glass IP 20 bulbs 12 watt complete all as specified and directed.

Supply and fixing in repair surface and wall mounted LED Tube light & fitting 20 watts, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver complete with provision PVC copper wire 1.5 sq mm 3 core of required length upto ceiling rose complete all as specified and directed.

Supply and fixing 10W surface mounted IP65 Bulkhead with system efficiency of 100LM/Watt LED bulk head shall be made up of Die cast PVC housing for better heat decapitation.P.F>.95with THD <10%,surge protection 4KV input voltage rane 150Vto 270V including connecting electricaly to ceiling rose using cord flexible 3 core PVC insulated over all sheathed with flexible copper conductor of size 0.75 sqmm complete all as specified and directed.

Supply and fixing in repair surface and wall mounted LED Tube Mirror light & fitting 10/12 watts, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver complete with provision PVC copper wire 1.5 sq mm 3 core of required length upto ceiling rose complete all as specified and directed.

S&F in replacement wall security light fitting energy saving & environmental frindely long life versatile pressure die cost aluminimum IP-66 road way luminaries with high power LED as a light sourse with toughened glass of 25W LED fittings alongwith Gl bracket made out of GI pipe 25 mm dia medium grade of 0.75 mtr length including 02 Nos. 25x3 mm flat iron clamps grouted on walls and provision of three core flexible of 1.50 Sqmm copper conductor cable from ceiling rose to light fitting and other fixing arrangement as required at site complete all as specified and directed. Note : Contractor will submit guarantee/warranty certificate from manufacturer.

S&F vertical distribution board TPN 4 way with including fixing of MCCB 100 A, four pole 26 KA as incomer, shrouded neutral bar & pan assembly with flexible connecting link and MCB SP (5-30 A)-12 Nos as out going complete all as specified and directed. Note:- The cost of MCCB and shall deemed to be included in unit cost.

Supply and fix sheet metal enclosure MCB distribution board, double door with IP-43 protection with acrylic cover single phase 240 volts 8 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed.

M&L MCB single pole 240 volts 6-32 amps,with rupturing capacity 10 KA using thimbles of required size complete all as specified and directed.

M&L MCB single pole and Neutral 240 volts 40 to 63 amps,with rupturing capacity 10 KA using thimbles of required size complete all as specified and directed.

M&L for sheet metal enclosure MCB distribution board single pole and neutral with a two pin and earth plug and socket 25 amps 240 volts with one single pole MCB of 25 amps earthing complete all as specified and directed.

Supply and fix electric water heater,storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessoriessuch as safety valve, thermostate, NRV, connection piece etc complete all as specified and directed.

Supply & Fixing in replecement Exhaust fan steel Body AC Single phase 230 volt size 300 mm Sweep with blades and frames and louvers and writing MES no in Black synthetic enamel paint including cutting of walls, drilling etc complete all as specified and directed.

Supply & Fixing in replecement Fresh Air fan plastic Body AC Single phase 230 volt size 250 mm Sweep with blades and frames and louvers and writing MES no in Black synthetic enamel paint including cutting of walls, drilling etc complete all as specified and directed.

Disconnecting & taking down upto 1200m sweep ceiling fan and deposited to MES store yard and Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.00, Air delivery minimum 210 CMM, 350 RPM (tolerance as per IS : 3742019), THD less than 10%, electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete all as specified and directed. Note : (a) Make, Model & Colour of fan as approved by GE. (b) Writing MES No. in black synthetic enamel paint by the contractor. (c) T & P will be provided by the contractor for reaching any height of the ceiling.

M&L in replacement of Earthing complete with galvanised steel earth plate electrode 60×60cm× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion including providing earth wire protection pipe GI light grade15mm dia from earth plate to main switch board/panel, watering pipe 20mm dia with wire mesh and funnel at top, earth pit and RCC pit cover in PCC 1:3:6 adequate quantity of charcoal dust and salt all around the erth plate, earth work in any type of soil remaing surplus excavated material all as required at site and specified in EP No 5 of SSR part I 1991 or directed incl testing on competion incliding excavation work and site clearance complete all as specified and directed.

Taking UP or Down steel tubing and connections including cleaning for removal to store 25 mm in size complete all as specified and directed.

Supply and laying galvanised iron medium grade pipe including fitting and fixtures complete all as specified and directed.

All as per item No. 150.00 above but One fan/Exhaust fan point controlled by one switch complete all as specified and directed.

Excavation in trenches not exceeding 1.5 mtr in depth and not exceeding 1.5 mtr wide in any type of soil for laying and taking out of GI/CI pipes complete all as specified and directed.

Returning filling in including spreading, leveling watering and well ramming in layers not exceeding 25cm thick complete all as specified and directed.

Removing excavated soils to a distance not exceeding 50 m and depositing where directed complete all as specified and directed.

Supply and Fix Gun Metal glove or gate valve with Iron Wheel head screenboth ends for iron pipe and fixed screwed both ends for iron pipe or for unions and fixed size 25 mm dia complete all as specified and directed.

Please Enable Macros to View BoQ information