SPECIAL REPAIRS TO BATHROOMS AND TOILETS OF BLDG NO T-8C, T-9C, T-10C AND T-11C IN NORTH CAMP AT ATS BELAGAVI

Amount

B/R WORKS :- Dismantling Mangalore pattern roofing tiles with ceiling tiles and considering under Sch of credit complete all as specified and directed.

Dismantling Battens for tiles, shingles etc, of any size including tilting fillets and considering under Sch of credit complete all as specified and directed.

Supply and Fix Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified all as specified and directed.

Supply and Fix Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof overing/cladding to wall, fixed with self tapping screws all as specified and directed.

Dismantling timber scantlings 40 sqcm and over in section in any position (unframed work) for purlins, rafters etc. all as specified and directed.

Supply and Fix mild steel Rolled trusses (framed) trussed purlins ,rails and fastenings, and heavy bracket framings, including distance pieces , cleats etc. Fe-410 W gde E-250 quality B all as specified and directed.

Supply and Fix structural steel plates Fe-410W(gde e-250) quality B, channels square cut or notched (ordinary or counter sunk) forming holes with riveted, bolted or welded attachments all as specified and directed.

Supply and Fix Rolled sections having Fe-410W(gde e-250) quality B, channels square cut or notched (ordinary or counter sunk) forming holes with riveted, bolted or welded attachments all as specified and directed.

Material and labour for preparation of new steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enemal paint over a coat of red oxide primer complete all as specified.

Material and labour Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 all as specified and directed.

Material and labour Cement concrete 1:3:6, type C-1 using 20mm graded stone aggregate as in coping including weathering, slightly rounded or chamfered angles and necessary form work all as specified and directed.

Demolition of brickwork or stone/boulder masonary, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc all as specified and directed.

Material and labour for pre cast cement concrete block masonry type C1, 1:3:6 (20 mm graded agrregate) solid blocks exc 10cm in width having minimum compressive strength of 50 kg/sq cm as per IS 2185 (Part I) 2005 and set in cement mortar 1:4 complete all as specified

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc.15cm thickness (below or above ground level) all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

Material and labour for 75 mm thick PCC 1:3:6 type C2 using 40 mm graded stone aggregate as in sub base all as specified and directed.

Material and labour 25 mm thick PCC 1:2:4 type B1, using 20 mm graded stone agg as in floor finished without using extra cement all as specified and directed .

Material and labour for coloured Non skid coloured tiles superior finish grade B-1 quality 7 to 8 mm thick(square/ rectangular) area of each tiles exceeding 0.11 sqm but not exc 0.18 sqm in floor with rectified edges (joint free) etc set and jointed in neat cement slurry over cement screed 15 mm thick in CM1:6 all as specified and directed.

Material and labour for Coloured glazed ceramic tiles economy finish Gde B-II (b) quality of size 350 x 450 x 7 mm thick with rectified edges as in vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and incl 10 cm thick backing coat with CM 1:4 all as specified and directed.

Material and labour Cement concrete type C1, 1:3:6 using 20mm graded stone aggregate, 75 mm thick as in plinth protection including finishing of concrete surface even and smooth without using extra cement all as specified.

Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc all as specified and directed.

Material and labour Rendering 15 mm thick cement plaster in CM 1:4 for fair faces of brickwork or concrete surfaces wall finished even & smooth without using extra cement all as specified and directed.

Material and labour Rendering 10 mm thick cement plaster in CM 1:4 for fair faces of brickwork or concrete surfaces wall finished even & smooth without using extra cement all as specified and directed.

Material and labour preparation of old painted surface by washing brooming downand stopping down painted surface by applying two coats of cement base paint over a coat of primer all as specified and directed .

Material and labour for preparation of new wall surfaces and applying two coats of cement base paint over coat of primer all as specified and directed .

Preparation of old plasterd walls surface by brooming down or by steel wire brushing, scrapping down smoke, soot, moss and efflorescent salts ,trading oil and greasy spots and applying two coats of white wash all as specified and directed .

Preparation of new plasterd wals surface by brooming down or by steel wire brushing, scrapping and applying two coats of white wash over a coat of primer all as specified and directed .

Taking down shutters of any description exc 2 sqm each all as specified and directed.

Taking down of chowkats with shutters (without taking off shutters from the frames) and refixing in same opening n exc 1.5 sqm each all as specified and directed.

Material and labour for factory made solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with ms square tube suppling and fixing in opening as per specification and drawing all as specified and directed.

Supply and Fix factory made solid panel PVC moulded door shutter 28 to 30 mm thick (stiles) with 2, 4 or 6 raised panel design with 2 mm thick moulded PVC sheet on the front face and 2 mm thick plain colour PVC sheet on back face as per specification and drawing with particle board core all as specified and directed.

Supply and Fix 150 mm long extruded aluminium alloy anodised handle cast type all as specified and directed.

Supply and Fix 100 mm long aluminium anodised barrel tower bolts of extruded section and fixed all as specified and directed.

Supply and Fix 100 mm long butt hinges medium weight cold rolled all as specified and directed.

Supply and Fix 300 mm long Aluminium alloy ,anodised sliding door bolt with hasp and stapple (bolt type) and fixing clips of sheet, cast of extruded section and fixing bolts and sliding bolts extruded sections or cast aluminium alloy and fixed all as specified and directed.

Taking down shutters of any description n. exc 1 sqm each all as specified and directed.

Supply and fix steel ventilator with top hung shutter including hinges steel peg stay complete all as specified and directed.

Supply and Fix 3 mm thick figured glass pin head type and glazing with oil putty in square n. exc 0.5 sqm in each pane all as specified and directed.

Supply & Fix in repairs Vitreous China Squatting pan, "Orissa" pattern, size 580 x 440 mm white with integral foot rests and 10 litres PVC capacity valve less, Syphonic action type, Flushing cistern, low level, white with inlet, ball valve, float and handle including brackets (SLIM LINE or equivalent) including PVC Flush pipe 32 mm dia. 1.3 m long, and setting the trap and pan in lime concrete 1:2:5 minimum 150 mm thick all round and finished just below level of rim of pan to receive the floor finishing all as specified and directed.

Supply & Fix Vitreous China Squatting pan, "Orissa" pattern, size 580 x 440 mm white with integral foot rests and 10 litres PVC capacity valve less, Syphonic action type, Flushing cistern, low level, white with inlet, ball valve, float and handle including brackets (SLIM LINE or equivalent) including PVC Flush pipe 32 mm dia. 1.3m long, and setting the trap and pan in lime concrete 1:2:5 minimum 150 mm thick all round and finished just below level of rim of pan to receive the floor finishing complete all as specified and directed.

Supply and Fix Vitreous china urinal, bowl type (flat back or corner wall type) of minimum size 465 x 355 x 265 mm white with grating and union for discharge pipe, providing and fixing plugs, waste pipe, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement complete all as specified and directed.

Supply and Fix PVC connection 15mm size with PTMT nuts of length 450mm all as specified and directed.

Taking down 15mm bore steel/PVC tubing and connection including bib taps, stop cock, showers etc. all as directed.

Taking down 20mm bore steel/PVC tubing and connection including bib taps, stop cock, showers etc. all as directed.

Taking down 25mm bore steel/PVC tubing and connection including bib taps, stop cock, showers etc. all as directed.

Supply and Fix in repairs 15mm stop valves fancy type, chromium plated, screwed down, high pressure, with crutch or round handle screwed both ends for iron pipe or for unions and fixed all as specified and directed.

Supply and Fix 15 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors in short lengths all as specified and directed.

Supply and Fix 20 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors in short lengths all as specified and directed.

Supply and Fix 25 mm bore Galvanized Steel tubes, medium grade with fittings fixed to walls and ceilings or laid in floors all as specified and directed.

Supply and Fix in repair 15mm bib taps fancy type chromium plated round handle, screwed down, screwed for iron pipe all as specified and directed.

Supply and Fix in repairs Chromium plated shower rose 125 mm size with or without swivel joints including fixing to steel pipe or union all as specified and directed.

Supply and Fix tubular brass chromium plated Towel rail 20 mm dia D type 60 cm long between flanges all as specified and directed.

Demolition and breaking up 75/100 mm size drain pipes (Salt glazed ware/ AC/PVC / Reinforced concrete) set in cement mortar all as specified and directed .

Supply and Fix 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed in wall/ floor all as specified and directed.

Supply and Fix 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed in wall/ floor all as specified and directed.

Supply and Fix PVC (SWR) vent cowl 110 mm dia all as specified and directed.

Supply and Fix PVC (SWR) Junction single, (single T) equal or unequal with access door 75 mm bore pipe all as specified and directed.

Supply and Fix PVC (SWR) Junction single, (single T) equal or unequal with access door 110 mm bore pipe all as specified and directed.

Supply and Fix 75 mm bore PVC (SWR) bends of any radius with access door all as specified and directed.

Supply and Fix 110 mm bore PVC (SWR) bends of any radius with access door all as specified and directed.

Supply and Fix (SWR) floor trap, plain with grating including jointing with solvent cement 75 mm dia inclduing fixing to existing pipe properly with solvent cement all as specified and directed

Removal of concrete and plaster debris to a distance of 5 Km and depositing where directed at a level n exc 1.50 m above the starting point complete all as specified and as directed.

Excavation in trenches n exc 1.5 m wide and n exc 1.5 m depth in hard/dense soil for foundation etc or for shaft, wells, manholes, pier holes etc n exc 10 Sqm on plan and not exc 1.5 m in depth and getting out complete all as specified and directed.

Material and labour for PCC 1:4:8, type D-2 using 40mm graded stone aggregate as in mass concrete complete all as specified and directed.

Material and labour for PCC 1:2:4, type B-2 using 40mm graded stone aggregate as in mass concrete complete all as specified and directed.

Supply and Fix framed work as water tank staging/gates of angle or other section with gusset/ base plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering, doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel, sheeting or other covering, running rails and guides) and hanging also fastening and fixing Fe 410W (Gde-E-250) quality A complete all as specified and as directed.

Supply and fixing plates (Plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe 290 (Gde E-165) complete all as specified and directed.

Dismantling water tank of capacity exc. 1000 Ltrs and n.exc.2000 ltrs with all accessories such as gate valve, float valve etc. complete all as specified and directed .

Supply and fix rotational moulded polyethylene water storage tanks of 2000 ltrs capacity (cylindrical/ vertical with closed top) hoisted and fixed in position all as specified and directed in SSR part I inlcuding fixing of PTMT ball valve epoxy coated aluminium rod and high density plastic ball of 40 mm dia as per site condition.

Returning filling in including spreading levelling and well ramming in layers not exc 25 cm in hard/dense soil all as specified and directed.

Removing excavated material (soils) not exc 50 m and depositing where directed at a level not exc 1.5 m above the starting point all as specified and directed.

Taking down 40 mm bore steel/PVC tubing and connection including bib taps, stop cock, showers etc. all as directed.

Supply and Fix 40 mm bore Galvanized Steel tubes, medium grade with fittings fixed to walls and ceilings or laid in floors all as specified and directed.

Supply and Fix 40mm Gun metal gate valves, with iron wheel head, screwed both ends for iron pipe and fixed as specified and directed.

Supply and Fix 25mm Gun metal gate valves, with iron wheel head, screwed both ends for iron pipe and fixed as specified and directed.

Supply and Fix mild steel bolts, dia of neck exc 20mm n. exc. 25mm purpose made, with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut, exc 30cm long embedded in RCC complete all as specified and directed

Material and labour TMT steel bars 10mm dia and over cut to length, bent to shape required including cranking bending, hooking for ends and binding with mild steel wire annealed not less than 0.9mm dia all as specified and directed.

Material and labour for TMT steel bars of 6mm to 8mm, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Use and waste formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work, vertical or to batter fair finished surfaces flat complete all as specified and directed.

Use and waste formwork to sides of pillars, posts, struts, piers, columns and stanchions vertical or to batter fair finished surfaces flat complete all as specified and directed.

Use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs and similar works n. exc 200 mm thick, horizontal or sloping fair finished surfaces flat complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for all as specified and directed.

Material and labour RCC 1:2:4, type B1 using 20 mm graded stone aggregate nominal mix for foundation, including rafts, footings, foundation beams, plinth beam, bases for columns etc basement slabs, underreamed piles and mass concrete complete all as specified and directed.

Material and labour RCC 1:2:4, type B1 using 20 mm graded stone aggregate nominal mix for columns, pillars, piers, posts, and struts complete all as specified and directed.

Material and labour RCC 1:2:4, type B1 using 20 mm graded stone aggregate nominal mix for slabs supported on walls, beams and columns in roofs,landings,balconies, deck slabs, shelves or similar works complete all as specified and directed.

Material and labour for Plain mild steel wire, galvanised class 3, 4 mm dia in detached work such as for mosquito nets and fixing to straining bolts, hooks, eyes, etc. and/or to straining bolts, including securing with and provision of galvanised iron tying wire, galvanised iron staples or steel pins, etc. as directed.

E/M WORKS:- Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings etc removing materials to store for keeping in safe custody or for considering under credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specied and directed .

Taking down carefully unserviceable main switches/DB's from their position and removing materials from site all as specified and as directed .

Material and Labour for point wiring with PVC unsheathed multi stranded 1.5 Sqmm FRLS copper Cable for one light point controlled by one way switch, and wire to be drawn in and including PVC casing capping 20/25 mm width complete with all accessories including MS sheet metal 1.2mm thick switch board or PVC rectangular switch board of suitable size to be fixed on wall respectively including white washing/colour washing/distempering to match the disturbed surfaces including PVC unsheathed multi stranded 1.5 Sqmm FRLS copper Cable as earth continuity connected with common earth dolly complete for the following all as directed by Eng -in Charge

One light point controlled by one, one way switch 5 Amp complete

One exhaust fan point controlled by one, one way switch 5 Amp complete

One 3 pin sockt outlet 5 Amp on the same board with other switch

All as per srl item No 90 here in before but for one 3 pin socket outlet 15 Amp independent with cable of size 2.5 Sqmm for piont wiring and 2.5 sqmm as in earth conduity conductor.

Supply and fix switch piano flush button single pole one way 5 Amp 240 V all as specified and as directed .

Supply and Fix socket outlet 3 pin ,5 Amp ,flush type all as specified and as directed .

Supply and Fix swicth socket combination 2 in 1,3 pin 16 Amp flush type 240 volts complete all as specified and as directed .

Supply and Fix ceiling rose surface backelite three terminal 240 volts complete all as specified and as directed .

Supply and Fix REGAL Batten for LED tube with single LED Lamp 1x 20 w, Ultra bright glass LED Tubelight with very high efficacy suited for installation in T5/T8 fitting with lamp holders etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size all as directed Make & Model No for Batten : Havells Cat No REGALBATTEN5UPTO1X18WDSBSWH and LED Lamp Havells Cat No CRYSTEL 1213T8DSTL20WLED865SGLASS or equivellent model of Make specified in List of Manufacturers. NOTE:- 1) For details please refer Particular Specification Clause No. 18.24. on Sl Page No.176 of tender documents. 2) Bidders are advised to read the description alongwith particular specifications before inserting their rates. 3). The Contractor shall print CA No and date of completion on each LED light fittings.

Supply and Fix sheet metal enclosure factory made double door for DB 240 volts with 200 Amps rated bus bar SPN 4 Way scomplete all as specified and as directed .

Supply and fix in repairs MCB SPN 32 Amps 240 volts, 50 Hz AC complete all as specified & directed .

Supply and fix in repairs MCB SP 06 to 32 Amps 240 volts, 50 Hz AC supply complete all as specified & directed .

Taking down ceilng fan/exhaust fan,dismantling blades and removing fan and blades to store, Painting of fans complete in situ with synthetic enamel paint by spraying including filling cavities with filler one coat after cleaning all dust etc and refixing ceiling fan and connecting up including provision of cable from ceiling rose or connector of fan .

Earthing complete with galvanised mild steel earth plate electrode of size 600 x 600 x 6mm thick burried directly in ground earth (in vertical) earth pit not less than 2.25 mtr deep below normal ground level with top edge of the earth plate not less than 1.5 mtr below ground level connected to galvanised iron or earth lead wire 4mm dia (8 SWG) by means of nut, bolt, check nuts and washer of galvanised iron including PCC pit in PCC 1:2:4 type B-1, pre-cast RCC cover slab using reinfocement with XPM weighing not less than 1.87 kg/Sqm with suitable handle made of 12mm round bar, including necessary excavation and earth work in any type of soil, 20mm dia medium grade galvanised steel tube flor watering with one end fixed with cast iron funnel and wire mesh 15mm bore light grade galvanised steel tubing upto 7.5 m length for drawing earth lead wire protection, common salt, charcoal, etc complete all as shown in electrical plate No 5 of SSR Part-I and testing on completion.

Supply and Fix ASTRA NEO LED street light made of pressure die cast housing with toughened glass and high power LEDs with option of secondary optic with IP-66 protection with SPD LED street light of 20 Watt all as cat part no .LSTS-20-CDL-M of Crompton make or equivalent make of Bajaj/Philips/Wipro/Havells.with sutable size bracket made to shape of 40 mm dia GI pipe medium grade of 1.4 mtr length including MS clamps 25 x 4 mm - 02 Nos with nut bolts washers complete. NOTE:- 1) For details please refer Particular Specification Clause No. 18.24. on Sl Page No.176 of tender documents. 2) Bidders are advised to read the description alongwith particular specifications before inserting their rates. 3). The Contractor shall print CA No and date of completion on each LED light fittings.

Vinayaka Enterprises

G K CONSTRUCTIONS

M/s S N Atiwadkar

DHAIRYASIL RAMAKANT DESAI