Loading
Loading…
Loading…
Tender Value
₹1.6 Cr
EMD Value
₹3.1 L
Closing Date
30 Sept 2026, 3:00 pm
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
WORKS.1
18 conditions · 6 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less, where V= Advertised value of the tender in crores of Rupees N- Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of 'total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Note for Special Technical Criteria- Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of opening of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
Experience in similar nature of work- (a)The tenderer must have successfully completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited:
i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works each costing 1.1.1 not less than the amount equal to 40% of advertised value of the tender, or One similar work each costing not less than the amount equal to 60% of advertised value of the tender.
(ii) The total value of similar nature of works completed during the qualifying period and not the payments received within qualifying period alone shall be considered. (iii) It should be noted that credentials against the work executed for private organizations shall not be considered. The credentials against similar nature of work done certificate issued from 1.1.2 Govt/Semi-Govt Organizations (b)In case of composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited:
Note: Separate completed works of minimum required values for each 1.1.3 component can also be considered for fulfilment of technical eligibility criteria.
Defination of Similar Work :- Any Civil Engineering works.
80 conditions · 28 needing a document upload
T h e tenderer should submit welder certificate that the welder has under gone trainingat RDSO approved training centre
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Tender form (First Sheet) as per 'Annexure-I' of Standard Tender Document.
Firm details as per 'Annexure-II' of Standard Tender Document.
Self attested copy of Permanent Account Number (PAN) issued by Income Tax Department.
For Sole Proprietorship firm submit details as per given below :-
Sole Proprietorship firm attached Affidavit as per 'Annexure -X' of Standard Tender Document.
Special power of Attorney as per proforma given in 'Annexure XI' of Standard Tender Document to be submitted by sole proprietor firm duly notarized.(Not required if tender documents are submitted by proprietor himself)
(A) i)An undertaking that he is not blacklisted or debarred by Railways or any other Ministry / Department of Govt, of India from participation in tender on the date of opening of bids, either in individual capacity or as a member of the partnership firm or JV in which he was / is a partner/member. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the General Conditions of Contract.
b) HUF: (i)A copy of notarized affidavit on Stamp Paper declaring that he who is submitting the tender on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF.
(ii)An undertaking that the HUF is not blacklisted or debarred by Railways or any other Ministry / Department of Govt, of India from participation in tender on the date of opening of bids, either in individual capacity or as a member of the partnership firm or JV in which HUF was / is a partner/member. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the General Conditions of Contract.
For Partnership firm submit details as per given below :-
Self/Notary attested copies of Partnership deed.
Special Power of Attorney as per proforma given in 'Annexure- XII' of Standard Tender Document to be submitted by Partnership firm. (Not required if one or more partners are authorized in Parternership deed to sign on behalf of the firm.)
An undertaking that the Partnership firm is not blacklisted or debarred by Railways or any other Ministry / Department of Govt, of India from participation in tender on the date of opening of bids, either in individual capacity or as a member of the partnership firm or JV in which he was / is a partner/member. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the General Conditions of Contract.
For JV firm submit details as per given below :-
Memorandum of Understanding of JV as per proforma given in 'Annexure-XIV' of Standard Tender Document.
Letter of consent as per proforma given in 'Annexure-XV' of Standard Tender Document to be submitted by a partnership firm participating as a Member of JV firm (wherever applicable).
Notary Certified copy of resolution passed by Board of Directors of the Company,permitting the company to enter into a JV agreement, authorizing MD or one of the Directors of Mangers of the Company to sign JV Agreement, such other documents required to be signed on behalf of the Company and enter into liability against the company and/or do any other act on behalf of the company to be submitted as per 'Annexure-XVI' of Standard Tender Document.
Special Power of Attorney as per proforma given in 'Annexure- XVII' of Standard Tender Document to be submitted by Limited Companies or Sole Proprietor participating as member of JV firm (wherever applicable).
Registered Society & Registered Trust: The tenderer shall submit
(i) a copy of the Certificate of Registration
(ii) a copy of Deed of Formation
(iii) a copy of Power of Attorney in favour of the individual to sign the tender documents and create liability against the Society/Trust.
An undertaking that the Registered Society & Registered Trust is not blacklisted or debarred by Railways or any other Ministry / Department of Govt, of India from participation in tender on the date of opening of bids, either in individual capacity or as a member of the partnership firm or JV in which he was / is a partner/member. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the General Conditions of Contract.
LLP (Limited Liability Partnership): If the tender is submitted on behalf of a LLP registered under LLP Act-2008, the tenderer shall submit along with the tender:
(i)A copy of LLP Agreement
(ii)A copy of Certificate of Incorporation
(iii)A copy of Power of Attorney/Authorization issued by the LLP in favour of the individual to sign the tender on behalf of the LLP and create liability against the LLP.
(iv)An undertaking that the LLP is not blacklisted or debarred by Railways or any other Ministry / Department of Govt. of India from participation in tender on the date of opening of bids, either in individual capacity or as a member of JV in which the LLP was / is a member. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the General Conditions of Contract.
(e)Company registered under Companies Act 2013:
(i)The copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company
(ii)A copy of Certificate of Incorporation
(iii)A copy of Authorization/Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company.
(iv)An undertaking that the Company is not blacklisted or debarred by Railways or any other Ministry / Department of Govt. of India from participation in tender on the date of opening of bids, either in individual capacity or as a member of the partnership firm or JV in which the Company was / is a partner/member. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the General Conditions of Contract.
As per Clause 46A.1., Part II of GCC-2022 and Advance correction slip No.1: Price Variation Clause (PVC) shall be applicable only in tender having advertised value above Rs.2 crore. Provided further that, in a contract where PVC is applicable, following shall be outside the purview of price adjustments (i.e., shall be excluded from the gross value of the work for the Purpose of price variation): a) Materials supplied by Railway to the Contractors, either free or at fixed rate; b) Any extra item(s) included in subsequent variation falling outside the purview of the Bill(s) of Quantities of tender, under clause 39. (I) (b) of these Standard General Conditions, unless applicability of PVC and 'Base Month' has been specially agreed, while fixing the rates of such extra item(s)'
Any Conditional offer will be summarily rejected.
In case of any difficulty, help desk available on the website of IREPS may be approached.
For those conditions for which standard formats have been given in the uploaded document titled-Formats for uploading of various format. The information should only be submitted in these standard formats.
Rates are inclusive of all taxes/octroi, license fee, royalty charges etc. legally leviable by State, Central Govt. and/or any other local authority.
In addition to General condition of contract 2022 and Indian Railways Unified standard specification Works Materials Volume I II 2010, revised upto date, special condition attached shall also apply.
Sales tax/Business tax, Royalty etc. will be recovered as per extant instruction on the subject.
All the tenderers/Contractors are allowed to make payments against this tender towards tender document cost and earnest money only through ONLINE payment modes available on IREPS portal line net banking, debit card, credit card etc. Manual payments through Demand draft, Banker cheque, Deposit receipts,FDR etc. are not allowed.
Payment of Earnest Money deposit (EMD) and Tender Document Cost (TDC), in respect of E-Tendering, should be accepted through net banking or payment gateway only.
Note for Commercial compliance :-
Certificates from private individuals for whom such works are executed being executed is not acceptable.
Eligibility criteria for works tender in respect of partnership firms:-
in case the tenderer is a partnership firm s , the experience, solvency and turn over shall be in the name and style of the firm only.
If the tenderer is a partnership firm, all the partners shall be jointly and severally liable for successful completion of the work and no request for change on the certification of the firm shall be entertained.
During the currency of the contract, no partner of the firm shall be permitted to withdraw from partnership business and in such and event it shall be treated as breach of trust and abandonment of the contract.
Any Conditional offer will be summarily rejected.
For Standard Financial criteria and Standard Technical criteria - Tenderers are required to submitted authenticated certificate along with the tenders from officers of government or semi- government/public sector undertakings under whom the work has been executed indicating there in the name of work executed, value of works/payment details and period during which completed. Such certificates should have signature and seal of the concerned officer. In the absence of such certificate the tender may not be considered.
Due to roll out of GST with effect from 01.07.2017. The following additional terms and special condition are given below :-
For the tenders due to open before roll out of GST- All the bidders/tenderers while quoting the rates should clearly indicate the rate of applicable duties and taxes included in the prices quoted by them. Any variation in tax structure/rate due to introduction of GST, shall be dealt with under Statutory Variation Clause.
For the tenders opening after roll out of GST- All the bidders/tenders should ensure that they are GST compliant and their quoted tax structure/rates are as per GST Law.
Tender will be opened at the specified time and date. In case the specified date is declared a holiday, the tender would be opened at the same time on the next working day.
The Railway reserves the right to verify all statements, information and documents submitted by the bidder in his tender offer, and the bidder shall, when so required by the Railway,make available all such information, evidence and documents as may be necessary for such verification. Any such verification or lack of such verification by the railway shall not relieve the bidder of its obligations or liabilities hereunder nor will it affect any rights of the railway thereunder.
In case of any wrong information submitted by tender, the contract shall be terminated, Earnest Money Deposit (EMD), Performance Guarantee (PG) and Security Deposit(SD) of contract forfeited and agency barred for doing business on entire Indian Railways for 5 (five) years.
In partial modification to Railway Board's letter No. 2007/CE.1/CT/18 dated 05.07.2010 and 14.09.2017, it has been decided to extend the scope of PMC services for all works contracts costing more than Rs. 10 Crore in open line.
Provision of divyangjan amenities and minimum essential amenities at stations under the jurisdiction of Sr.DEN/I/APDJ.
24-AP-I-2026~NFR
24-AP-I-2026
Open
Works - General
9 Months
Alipurduar, West Bengal
₹0
₹3.1 L
9 Sept 2026
9 Sept 2026
16 Sept 2026
133 items across 2 schedules · ₹1,30,86,202.99 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | All kinds of soil | cum 10 | — | 177.5 | 1,775 |
| 2 | All kinds of soil. | cum 278.25 | — | 260.3 | 72,428.48 |
| 3 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift. | cum 60 | — | 196 | 11,760 |
| 4 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. | cum 22 | — | 2,123.75 | 46,722.5 |
| 5 | 1:1 1/2:3 (1 Cement: 1 1/2 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) | cum 63.62 | — | 8,340.85 | 5,30,644.88 |
| 6 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | cum 80.5 | — | 7,878.5 | 6,34,219.25 |
| 7 | 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) | cum 30 | — | 7,294.7 | 2,18,841 |
| 8 | 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources) | cum 57 | — | 7,178.75 | 4,09,188.75 |
| 9 | 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) | cum | — | 6 6812 | 40,872 |
| 10 | Foundations, footings, bases for columns | Sqm 588 | — | 392.15 | 2,30,584.2 |
| 11 | Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc. | Sqm 36 | — | 842.5 | 30,330 |
| 12 | Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20mm nominal size derived from natural sources). | Sqm | — | 6 495.75 | 2,974.5 |
| 13 | 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) | cum 26.26 | — | 9,045.75 | 2,37,541.4 |
| 14 | 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | — | 1 10852.95 | 10,852.95 |
| 15 | cum | — | 1 11505.5 | 11,505.5 | |
| 16 | Foundations, footings, bases of columns, etc. for mass concrete | Sqm 48 | — | 392.15 | 18,823.2 |
| 17 | Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. | Sqm 306.15 | — | 842.5 | 2,57,931.38 |
| 18 | Suspended floors, roofs, landings, balconies and access platform | Sqm 40 | — | 927.25 | 37,090 |
| 19 | Lintels, beams, plinth beams, girders, bressummers and cantilevers | Sqm 19 | — | 736.4 | 13,991.6 |
| 20 | Columns, Pillars, Piers, Abutments, Posts and Struts | Sqm 14 | — | 961.3 | 13,458.2 |
| 21 | Thermo-Mechanically Treated bars of grade Fe-500D or more. | Kg 1925 | — | 107.85 | 2,07,611.25 |
| 22 | Mild steel and Medium Tensile steel bars | Kg 1021.54 | — | 107.1 | 1,09,406.93 |
| 23 | Thermo-Mechanically Treated bars of grade Fe-500D or more. | Kg 1807 | — | 107.85 | 1,94,884.95 |
| 24 | Concrete of M25 grade with minimum cement content of 330 kg /cum | cum | — | 3 9504.75 | 28,514.25 |
| 25 | Concrete of M25 grade with minimum cement content of 330 kg /cum | cum | — | 4 9860.4 | 39,441.6 |
| 26 | Cement mortar 1:4 (1 cement : 4 coarse sand) | cum | — | 3 7370.65 | 22,111.95 |
| 27 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum 24 | — | 7,132.25 | 1,71,174 |
| 28 | cement mortar 1:4 (1 cement : 4 coarse sand) | Sqm 75.5 | — | 905.05 | 68,331.28 |
| 29 | Cement mortar 1:4 (1 cement :4 coarse sand) | Sqm 52 | — | 1,123.8 | 58,437.6 |
| 30 | From ground level upto plinth level | cum 5.5 | — | 7,361.35 | 40,487.43 |
| 31 | Above plinth level upto floor V level | cum | — | 1 9439.75 | 9,439.75 |
| 32 | Granite stone of any colour and shade | Sqm | — | 8 3094.55 | 24,756.4 |
| 33 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | Sqm 47 | — | 1,267.95 | 59,593.65 |
| 34 | 4 mm thick glass pane (weight not less than 10kg/sqm). | Sqm | — | 2 2241.8 | 4,483.6 |
| 35 | Fixed to openings /wooden frames with rawl plugs screws etc. | Kg 20 | — | 238.35 | 4,767 |
| 36 | Providing 40x5 mm flat iron hold fast 400 mm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 300x100x150 mm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). | Each | — | 4 228.85 | 915.4 |
| 37 | 300x16 mm | Each | — | 1 216.55 | 216.55 |
| 38 | 150x10 mm | Each | — | 1 59.45 | 59.45 |
| 39 | 125 mm | Each | — | 1 39.95 | 39.95 |
| 40 | 150x10 mm | Each | — | 1 287.25 | 287.25 |
| 41 | 100x10 mm | Each | — | 1 197.5 | 197.5 |
| 42 | 125 mm | Each | — | 1 256.65 | 256.65 |
| 43 | 250x16 mm | Each | — | 1 260.6 | 260.6 |
| 44 | Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame. | Metre | — | 9 570.95 | 5,138.55 |
| 45 | 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames. | Sqm | — | 5 3720.75 | 18,603.75 |
| 46 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | Kg 7668 | — | 133.7 | 10,25,211.6 |
| 47 | Hot finished seamless type tubes | Kg 1627.5 | — | 206.35 | 3,35,834.63 |
| 48 | Electric resistance or induction butt welded tubes | Kg 14455 | — | 194.4 | 28,10,052 |
| 49 | Providing and fixing mild steel round holding down bolts with nuts and washer plates complete. | Kg 712.5 | — | 97.2 | 69,255 |
| 50 | Providing and fixing bolts including nuts and washers complete. | Kg 200 | — | 159.35 | 31,870 |
| 51 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | Kg 42 | — | 172.6 | 7,249.2 |
| 52 | Cement concrete pavement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete. | cum | — | 2 8595.15 | 17,190.3 |
| 53 | Dark shade pigment using ordinary cement | Sqm 22.5 | — | 1,442.15 | 32,448.38 |
| 54 | Medium shade pigment using 50% white cement 50% Grey cement | Sqm | — | 2 1328.35 | 2,656.7 |
| 55 | Size of Tile 600 x 600 mm | Sqm 11 | — | 1,464.85 | 16,113.35 |
| 56 | 110 mm diameter | Metre 91 | — | 377.4 | 34,343.4 |
| 57 | 110 mm | Each 10 | — | 371.3 | 3,713 |
| 58 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in- charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | Sqm 825 | — | 738.65 | 6,09,386.25 |
| 59 | Ridges plain (500 - 600mm) | Metre 33 | — | 532.35 | 17,567.55 |
| 60 | Gutter (600 mm over all girth) | Metre 50 | — | 1,313.7 | 65,685 |
| 61 | 1:4 (1 cement: 4 fine sand) | Sqm 88 | — | 347.05 | 30,540.4 |
| 62 | 1:6 (1 cement: 6 fine sand) | Sqm 14 | — | 383 | 5,362 |
| 63 | 1:4 (1 cement: 4 coarse sand) | Sqm 25.2 | — | 357.35 | 9,005.22 |
| 64 | 1:3 (1 cement: 3 fine sand) | Sqm 342 | — | 439.25 | 1,50,223.5 |
| 65 | 1:4 (1 cement: 4 fine sand) | Sqm | — | 3 425.55 | 1,276.65 |
| 66 | 1:3 (1 cement : 3 fine sand) | Sqm 13 | — | 300.45 | 3,905.85 |
| 67 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. | Sqm 25 | — | 262.7 | 6,567.5 |
| 68 | New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre | Sqm 31 | — | 185.65 | 5,755.15 |
| 69 | New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) | Sqm 38 | — | 160.6 | 6,102.8 |
| 70 | Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm | Sqm 171 | — | 193.7 | 33,122.7 |
| 71 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture | Sqm | — | 9 176.25 | 1,586.25 |
| 72 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture | Sqm 12 | — | 170.7 | 2,048.4 |
| 73 | Two or more coats on new work | Sqm | — | 2 155.9 | 311.8 |
| 74 | Two or more coats on new work | Sqm 777.5 | — | 146.8 | 1,14,137 |
| 75 | Lettering with black Japan paint of approved brand and manufacture | per 15774 letter per cm height | — | 6.15 | 97,010.1 |
| 76 | Nominal concrete 1:3:6 or richer mix (including equivalent design mix) | cum 255 | — | 2,434.25 | 6,20,733.75 |
| 77 | 63 mm to 45 mm size stone aggregate | cum 49.9 | — | 1,636.05 | 81,638.9 |
| 78 | Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road/vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate, watering and compacting to the required density . | cum 49.9 | — | 1,046.95 | 52,242.81 |
| 79 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 | Sqm 102 | — | 644.05 | 65,693.1 |
| 80 | R.C.C. Standards post/ struts/rails/ pales of mix 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 12.5 mm nominal size) with wooden plugs or 6mm bar nibs wherever required as per direction of Engineer-in- charge (cost of earth works in excavation, concrete works in foundation to be paid separately). | cum 12.5 | — | 32,891.2 | 4,11,140 |
| 81 | With G.I. barbed wire | Metre 500 | — | 14 | 7,000 |
| 82 | Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) in pavements, laid to required slope and camber in panels as required including consolidation finishing and tamping complete. | cum 43 | — | 7,993.8 | 3,43,733.4 |
| 83 | Made of G.I. wire of dia 4 mm | Sqm 850 | — | 1,017.8 | 8,65,130 |
| 84 | With granite stone of area less than 0.50 sqm. | Sqm 85.2 | — | 4,746.2 | 4,04,376.24 |
| 85 | White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests | Each | — | 2 6767.4 | 13,534.8 |
| 86 | W.C. pan with ISI marked white solid plastic seat and lid | Each | — | 1 6515.55 | 6,515.55 |
| 87 | W.C. pan with ISI marked white solid plastic seat and lid | Each | — | 1 8006.6 | 8,006.6 |
| 88 | Single half stall urinal with 5 litre P.V.C. automatic flushing cistern | Each | — | 1 12071.75 | 12,071.75 |
| 89 | Single squatting plate with 5 litre P.V.C. automatic flushing cistern | Each | — | 1 9256.45 | 9,256.45 |
| 90 | White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps | Each | — | 1 2648.85 | 2,648.85 |
| 91 | White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap | Each | — | 1 2226.35 | 2,226.35 |
| 92 | White Vitreous China Surgeon type wash basin of size 660x460 mm with a pair of 15 mm C.P. brass pillar taps with elbow including operated levers | Each | — | 1 3600.6 | 3,600.6 |
| 93 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. | Each | — | 2 1683.35 | 3,366.7 |
| 94 | 250x125x25 mm | Pair | — | 1 256.25 | 256.25 |
| 95 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively. | Each | — | 1 1648.95 | 1,648.95 |
| 96 | Providing and fixing white vitreous china squatting plate urinal with integral rim longitudinal flush pipe. | Each | — | 1 4048.65 | 4,048.65 |
| 97 | Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. | Each | — | 1 1607.95 | 1,607.95 |
| 98 | Rectangular shape 1500x450 mm | Each | — | 1 2093 | 2,093 |
| 99 | C.P. brass | Each | — | 1 803.7 | 803.7 |
| 100 | Sand cast iron S&S pipe as per IS: 1729 | Metre | — | 4 1151.9 | 4,607.6 |
| 101 | Sand cast iron S&S as per IS - 1729 | Each | — | 2 726.55 | 1,453.1 |
| 102 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. | Each | — | 1 168.35 | 168.35 |
| 103 | 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms | Each | — | 1 673.4 | 673.4 |
| 104 | 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. | Each | — | 1 708.95 | 708.95 |
| 105 | PN - 16 Pipe, 20mm OD (SDR-7.4) | Metre 152 | — | 272 | 41,344 |
| 106 | PN - 16 Pipe, 25mm OD (SDR-7.4) | Metre 584 | — | 318.35 | 1,85,916.4 |
| 107 | PN - 10 Pipe, 50mm OD (SDR-11) | Metre 244 | — | 580.1 | 1,41,544.4 |
| 108 | 15 mm nominal dia Pipes | Metre 10 | — | 286.8 | 2,868 |
| 109 | 25 mm nominal dia Pipes | Metre 105 | — | 401.55 | 42,162.75 |
| 110 | 50 mm nominal dia Pipes | Metre 104 | — | 934.15 | 97,151.6 |
| 111 | 25 mm nominal dia Pipes | Metre 69 | — | 627.25 | 43,280.25 |
| 112 | 25 mm nominal dia Pipes | Metre 69 | — | 355.4 | 24,522.6 |
| 113 | 50 mm nominal dia Pipes | Metre | — | 7 794.25 | 5,559.75 |
| 114 | 25 mm dia nominal bore | Metre 37 | — | 551.7 | 20,412.9 |
| 115 | 40 mm dia nominal bore | Metre 34 | — | 811.9 | 27,604.6 |
| 116 | 15 mm nominal bore | Each | — | 3 353.25 | 1,059.75 |
| 117 | 15 mm nominal bore | Each | — | 1 353.25 | 353.25 |
| 118 | 25 mm nominal bore | Each 21 | — | 622.4 | 13,070.4 |
| 119 | 50 mm nominal bore | Each 11 | — | 1,026.65 | 11,293.15 |
| 120 | 15 mm nominal bore | Each | — | 2 97.75 | 195.5 |
| 121 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | Per 1000 Litre | — | 11 | 11,000 |
| 122 | 15mm nominal bore | Each | — | 1 574.3 | 574.3 |
| 123 | 15 mm nominal bore, 86 mm long, weighing not less than 88 gms | Each 90 | — | 125.6 | 11,304 |
| 124 | 15 mm nominal bore, 122 mm long, weighing not less than 99 gms | Each | — | 1 161.2 | 161.2 |
| 125 | 15 mm nominal bore, 98 mm long, weighing not less than 75 gms | Each | — | 3 112.8 | 338.4 |
| 126 | Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. | Each | — | 2 111.45 | 222.9 |
| 127 | Rectangular shape 600x450 mm internal dimensions | Each | — | 2 1437.65 | 2,875.3 |
| 128 | Providing and fixing anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868. Minimum anodic coating of grade AC 15) sub frame work for windows and ventilators with extruded built up standard tubular sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia and size (Dash fastener to be paid for separately). | Kg 40 | — | 402.8 | 16,112 |
| 129 | Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, of size 1000 x 450x50 mm, reinforced with 8 mm dia four nos longitudinal & 9 nos cross sectional T.M.T. hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with M.S. flats of size 50 mm x 1.6 mm complete, all as per direction of Engineer-in-charge. | Each | — | 2 1399.95 | 2,799.9 |
| Schedule total | ₹1,30,81,196.81 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
NewGCC2022_compressed.pdf
ATTACHMENT
GCC2022CorrectionSlip1to11_compressed.pdf GCC 2022 correction slip 1 to 11
ATTACHMENT
AdvanceCorrectionSlipNO.12_compressed.pdf GCC 2022 correction slip 12
ATTACHMENT
SHRAMIKKALYAN.pdf
ATTACHMENT
EPFMPAct.pdf
ATTACHMENT
BG.pdf
ATTACHMENT
STANDARD TENDER DOCUMENT
ATTACHMENT
Summarystationwisescopeofwork.pdf
ATTACHMENT
GCC2022CorrectionSlip1to11_compressed.pdf
ATTACHMENT
AdvanceCorrectionSlipNO.12_compressed.pdf
ATTACHMENT
StandardTenderDocument24-AP-I-2026ProvisionofDivyangjan.pdf
ATTACHMENT
NoticeInvitingTender24-AP-I-2026.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .