Construction of office Building and Malkhana lockup of office of the Superintendent of Excise at North Lakhimpur , Dist- Lakhimpur, Assam.

Amount

Ground Floor

Earthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, .. A) Upto a depth at 2m below the existing ground level (a) In ordinary soil.

Providing brick soling in foundation and under floor with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if (a) Brick flat soling

Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundat ion bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (a). In prop. 1:3: 6

Supplying, fitting and fixing in position reinforcement bars conforming to relevant l.S. Code for R.C.C. workl R.B. walling including straightening,cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed i) TATA I SAIL ii) ISi aooroved super ductile TMT Bar

Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering,strutting and propping etc.,height of propping and centering below supporting floor to ceiling not exceeding 4.0M Foundation, footings, bases of columns, pile cap, raft and mass concrete works etc. ii) Usinq 25mm thick plank

Sides of tie beams, grade beams etc. at or below ground level. ii) Usinq 25mm thick plank

Columns, Pillars, Posts & Strut (a) Square, Rectangular, polygonal in plan or any shape like Tee/L etc. ... ii) Usinq 25mm thick plank

Sides and Soffits of Beams, beam haunchings,lintels and horizontal ties. ii) Using 25mm thick plank

Flat Surfaces such as soffits of suspended floors, roofs, landings, cantelever slabs, chajjas, balconies and the like. ii) Using 25mm thick plank

Vertical ties, fins, sun breaker, louvers, bands, dropwalls etc. ii) Using 25mm thick plank

Staircase with sloping or stepped soffits including risers and stringers but excluding Landina. (Usina 38mm thick olank)

Providing and laying plain/reinforced cement croncrete works cement with coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and A) In sub - structure up to plinth level Foundation,footing, columns with'base tie and plinth beam, pile cap, base slab, retaining wa lls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up (b) M20 in prop. 1:1.5:3

B) Super-structure from plinth level upto 1st floor level. ii) Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (b) M20 or Prop. 1:1.5:3

Brick work in cement morter with 1st class brick including racking out joints and dewatering if necessary, and curing complete as directed in sub-structure up to plinth level. (a). In proportion 1:4.

Earth/ sand filling in plinth in layers not more than 150mm thick including necessary carriage, watering, ramming etc. complete as directed and specified including payment of land compensation , forest royalty, sales tax and other duties and taxes as may be necessary. (c) With river sand or silt

Providing and laying 25mm thick damp proof course with cement concrete in prop 1:1.5:3 with graded stone agg. of 10mm down nominal size including providing approved damp proof

1st class brick nagged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of (A) 112mm thick brick wall (a) In cement mortar in proportion 1:4.

Providing,fitting and fixing powder coated pressed steel door frame made of 1.25mm/ 1.6mm thick sheet of various sizes with necessary hinge jamb, lock jamb, head and steel base ties at the bottom of the frame. (a) 1.25mm thick sheet (i) Size 90mm x 60mm (Single rebate)

Providing, fitting and fixing anodised aluminium sliding windows and ventilators of standard sections of approved brand without horizontal glazing bars, joints mitred and welded (manufactured to relevant IS specifications) (a)2 Track sliding window (i)6mm clear glass

Providing, fitting and fixing factory made wooden panelled doors with panel inserts of 75mm to 50mm width and 12mm to 20mm thickness.joined together with continous tongue and groove joints glued together with b) With 1st class local wood (Ho11ock ... (i) 40 mm thick with panel inserts of 20mm thickness.

Providing, fitting and fixing M.S. grill of required pattern for windows/ clerestory windows/ openingwith M.S.flats .......... II Ornamental grill (c) Fixed to Brickwork/ P.C.C/R .C.C.

15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises. internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing B) On fair side b) In cement mortar 1:4

A) On rough side (i) In prop. 1:4

Extra over item no 6.2.1to 6.2.3 for plastering on celling and soffits of stairs up to 1st floor level (instead of plastering on walls) including curing complete as directed

Cement plaster skirting with cement mortar in prop. 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement including rounding of junctions with floor. (a) 15 mm thick

Plain cement concrete floor base in prop1:3:6 laid in alternate bays as specified with coarse agg. of size 13mm to 32mm including dewatering if necessary, and curing etc. complete. b) 50mm thick

Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floors, skirtings, risers and treads of steps over 15 mm thick base of cement mortar in prop. 1:3 b) Executive range i) Of size 800mmx800mm and above

Providing two coats of Birla White Wall Care Putty (Water Resistant White Cement based putty for concrete/ mortar walls and ceiling both internal and external) after removing all loosely adhering material from the wall surface (i) Thickness = 1.5 mm thick

Finishing old I new wall with water proofing weather coat smooth anti-fungal exterior painting of approved make of Berger paint of required shade after cleaning and clearing the surface etc. including scaffolding complete as all levels (two coats)

f) Distempering with dry distemper of approved brand and manufacture(two coats)and of required shade on new wall surface to give an even shade, over and including priming coat of white primer after throughly brushing

Providing and fixing in position collapsible M.S. shutters with vertical channels 20mmx10mmx2mm braced with flat iron diagonals 20mmx5mm size with top and bottom rails of T-iron 40mmx40mmx6mm with 38mm dia steel

Applying priming coat over new·wood and wood based surfaces over 1OOmm in girth/width after and including preparing the surface by through ly cleaning ... (a). With ready mixed paint .Wood primer (pink)

Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even (i).Surfaces over 100mm in width or girth. al. General purpose

Applying primary coat over new steeland other metalsurface over 1OOm in width or girth after preparing the surface by throughly cleaning oil.grease, dirt and other foreign matter and scoured with wire brushes. a). With ready mixed "red-lead/ red oxide" primer.

Painting two coats (excluding priming coat) on new steel and other metalsurface with enamel paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/Nerolac) to give an even shade including (i).Surfaces over 100mm in width or girth. a\. General ouroose

Providing plinth protection with bricks flat laid in cement mortar 1:4 and finished with 15mm thick cement plaster in prop. 1:2 with a floating coat of neat cement finish.

Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects .... a) Sliding door bolts i) 300mm x 16mm

b) Tower bolts i) 300mm x 12mm

c) Door handles ii) 1OOmm

Pre construction anti - termite treatment by applying in the entire levelled area after plinth filling and before laying floor by applying the emulsion @ 5 (five) litres per square meter of the surface... a) with aqueous emulsion having concentration 1:19

Providing precast R.C.C slab over drain ,septic tank etc. in prop. 1:2:4 reinforced with 1Omm M.S. bar @ 150mm centre both ways tying a) 1OOmm thick slab

Providing and fixing Stainless Steel ( Grade 304) railing made of Hollow tubes,channels, plates etc., including welding, grinding, buffing, polishing

Providing polished granite slab of approved quality, size, shape and thickness not less than 18 mm on floors, skirtings, treads and risers of steps over cement mortar bed 15 mm thick in prop. 1:3 (iii) Deluxe Quality (i) With Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)

First Floor

Supplying, fitting and fixing in position reinforcement bars conforming to relevant l.S. Code for R.C.C.work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per> details, supplying and binding with 20G annealed i) TATA I SAIL ii) ISi approved suoer ductile TMT Bar

Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc.,height of propping and centering below supporting floor to ceiling not exceeding 4.0M Columns, Pillars, Posts & Strut (a) Square, Rectangular, polygonal in plan or any shape like Tee/L etc. ... ii) Using 25mm thick plank

Sides and Soffits of Beams, beam haunchings,lintels and horizontal ties. ii) Using 25mm thick plank

Flat Surfaces such as soffits of suspended floors, roofs, landings, cantelever slabs, chajjas,balconies and the like. ii) Using 25mm thick plank

Vertical ties, fins, sun breaker, louvers, bands, dropwalls etc. ii) Using 25mm thick plank

Staircase with sloping or stepped soffits including risers and stringers but excluding LandinQ. (Usina 38mm thick plank)

Providing and laying plain/reinforced cement croncrete works cement with coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and B) Super-structure from plinth level upto 1st floor level. ii) Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam,girder, bressumer, cantilever, staircase l (b} M20 or Proo. 1:1.5:3

1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of (A) 112mm thick brick wall (a) In cement mortar in orooortion 1:4.

Providing,fitting and fixing powder coated pressed steel door frame made of 1.25mm/ 1.6mm thick sheet of various sizes with necessary hinge jamb,lock jamb,head and steelbase ties at the bottom of the frame. (a) 1.25mm thick sheet (i) Size 90mm x 60mm (Single rebate)

Providing, fitting and fixing anodised aluminium sliding windows and ventilators of standard sections of approved brand without horizontal glazing bars,joints mitred and welded (manufactured to relevant IS specifications) (b)3 Track sliding window (i)6mrf1 clear glass

(a)2 Track sliding window (i)6mm clear glass

Providing,fitting and fixing factory made wooden panelled doors with panel inserts of 75mm to 50mm width and 12mm to 20mm thickness.joined together with continous tongue and groove joints glued together with b) With 1st class local wood (Hallock ... (i) 40 mm thick with panel inserts of 20mm thickness.

Providing, fitting and fixing M.S. grill of required pattern for windows/ clerestory windows/ openingwith M.S.flats .......... II Ornamental grill (c) Fixed to Brickwork/ P.C.C/R.C.C.

15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing B) On fair side b)In cement mortar 1:4

A) On rouQh side (i) In prop. 1:4

Extra over item no 6.2.1 to 6.2.3 for plastering on celling and soffits of stairs up to 1st floor level (instead of plastering on walls) including curing complete as directed.

Cement concrete works in topping 1:1:2 (1cement :1sand :2 graded aggregates on R.C.C floor,tread and rise of steps finished with a floating coat of neat cement using cement slurry for bond @ 2.75 kg.of cement (b) 20 mm thick

Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floors, skirtings,risers and treads of steps over 15 mm thick base of cement mortar in prop. 1:3 b) Executive range i) Of size 800mmx800mm and above

Providing Ceramic Tiles of approved quality, size, shape and thickness not less than 8 mm on floors,skirtings, treads and risers of steps over cement mortar bed 15 mm thick in prop. b) Executive range (i) Of size 300mmx300mm and above

Providing polished ceramic wall tiles of approved quality, size,shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 b) Executive range ii) Of size 250mmx350mm and above

Providing two coats of Birla White Wall Care Putty (Water Resistant White Cement based putty for concrete/ mortar walls and ceiling both internal and external) after removing all loosely adhering material from the wall surface (i) Thickness = 1.5 mm thick

Finishing old I new wall with water proofing weather coat smooth anti-fungal exterior painting of approved make of Berger paint of required shade after cleaning and clearing the surface etc. including scaffolding complete as directed at all levels ltwo coats\

f) Distempering with dry distemper of approved brand and manufacture(two coats)and of required shade on new wall surface to give an even shade, over and including priming coat of white primer after throughly brushing

Providing and fixing in position collapsible M.S. shutters with vertical channels 20mmx1Ommx2mm braced with flat iron diagonals 20mmx5mm size with top and bottom rails of T-iron 40mmx40mmx6mm with 38mm dia steel

Applying priming coat over new wood and wood based surfaces over 1OOmm in girth/width after and including preparing the surface by throughly cleaning... (a). With ready mixed paint , Wood primer (pink)

Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even (i).Surfaces over 100mm in width or girth. a) General ouroose

Applying primary coat over new steel and other metal surface over 1OOm in width or girth after preparing the surface by throughly cleaning oil,grease, dirt and other foreign matter and scoured with wire brushes, a). With ready mixed "red-lead/ red oxide" primer.

Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/Nerolac) to give an even shade including (i).Surfaces over 1OOmm in width or girth. a). General ouroose

Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects.... a) Sliding door bolts i) 300mm x 16mm

b) Tower bolts i) 300mm x 12mm

c) Door handles ii) 100mm

Providing and fixing Stainless Steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, loolishina

Providing polished granite slab of approved quality, size, shape and thickness not less than 18 mm on floors, skirtings,treads and risers of steps over cement mortar bed 15 mm thick in prop. 1:3 (iii) Deluxe Quality (i) With Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)

Second Floor

Supplying, fitting and fixing in position reinforcement bars conforming to relevant l.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed i) TATA / SAIL ii) ISi approved super ductile TMT Bar

Providing form work of ordinary timber planking so as to give a rough finish including centering,shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M Columns, Pillars, Posts & Strut (a) Square.Rectangular, polygonal in plan or any shape lke Tee/l etc.... ii) Using 25mm thick plank

Sides and Soffits of Beams, beam haunchings,lintels and horizontal ties. ii) Using 25mm thick plank

Flat Surfaces such as soffits of suspended floors, roofs, landings, cantelever slabs, chajjas,balconies and the like. ii) Using 25mm thick plank

Vertical ties,fins, sun breaker, louvers. bands, dropwalls etc. ii) Using 25mm thick plank

Staircase with sloping or stepped soffits including risers and stringers but excluding Landinq. (Usinq 38mm thick plank)

Providing and laying plain/reinforced cement croncrete works cement with coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and B) Super-structure from plinth level upto 1st floor level. ii) Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band,beam, girder, bressumer, cantilever, staircase (b) M20 or Prop. 1:1.5:3

1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of (A) 112mm thick brick wall (a) In cement mortar in proportion 1:4.

Providing,fitting and fixing powder coated pressed steel door frame made of 1.25mm/ 1.6mm thick sheet of various sizes with necessary hinge jamb, lock jamb, head and steel base ties at the bottom of the frame. (a) 1.25mm thick sheet (i) Size 90mm x 60mm (Single rebate)

Providing, fitting and fixing anodised aluminium sliding windows and ventilators of standard sections of approved brand without horizontal glazing bars,joints mitred and welded (manufactured to relevant IS specifications) (b)3 Track sliding window (i)6mm clear glass

(a)2 Track sliding window (i)6mm clear glass

Providing, fitting and fixing factory made wooden panelled doors with panel inserts of 75mm to 50mm width and 12mm to 20mm thickness.joined together with continous tongue and groove joints glued together with b) With 1st class local wood (Hollack ... (i) 40 mm thick with panel inserts of 20mm thickness.

Providing, fitting and fixing M.S. grill of required pattern for windows/ clerestory windows/ openingwith M.S.flats .......... II Ornamental grill (c) Fixed to Brickwork/ P.C.C/R.C.C.

15 mm thick Cement plaster in single coat on 15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing B)

A) On rough side (i) In prop. 1:4

Extra over item no 6.2.1 to 6.2.3 for plastering on celling and soffits of stairs up to 1st floor level (instead of plastering on walls) including curing complete as directed.

Cement concrete works in topping 1:1:2 (1cement :1sand :2 graded aggregates on R.C.C floor, tread and rise of steps finished with a floating coat of neat cement using cement slurry for bond @ 2.75 kg.of cement (b) 20 mm thick

Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floors, skirtings, risers and treads of steps over 15 mm thick·base of cement mortar in prop.1:3 b) Executive range i) Of size 800mmx800mm and above

Providing Ceramic Tiles of approved quality, size, shape and thickness not less than 8 mm on floors, skirtings, treads and risers of steps over cement mortar bed 15 mm thick in prop.b) Executive range (i) Of size 300mmx300mm and above

Providing polished ceramic wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 b) Executive range ii) Of size 250mmx350mm and above

Providing two coats of Birla White Wall Care Putty (Water Resistant White Cement based putty for concrete/ mortar walls and ceiling both internal and external) after removing all loosely adhering material from the wall surface (i) Thickness ::; 1.5 mm thick

Finishing old I new wall with water proofing weather coat smooth anti-fungal exterior painting of approved make of Berger paint of required shade after cleaning and clearing the surface etc. including scaffolding complete as directed at all levels !two coats)

f) Distempering with dry distemper of approved brand and manufacture(two coats)and of required shade on new wall surface to give an even shade, over and including priming coat of white primer after throughly brushing

Providing and fixing in position collapsible M.S. shutters with vertical channels 20mmx10mmx2mm braced with flat iron diagonals 20mmx5mm size with top and bottom rails of T-iron 40mmx40mmx6mm with 38mm dia steel

Applying priming coat over new wood and wood based surfaces over 1OOmm in girth/width after and including preparing the surface by throughly cleaning... (a).With ready mixed paint , Wood primer (pink)

Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI painV J & N paint/ Nerolac) to give an even (i).Surfaces over 100mm in width or girth. a\. General ouroose

Applying primary coat over new steel and other metal surface over 1OOm in width or girth after preparing the surface by throughly cleaning oil,grease , dirt and other foreign matter and scoured with wire brushes, a). With ready mixed "red-lead/ red oxide" primer.

Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint of approved brand and manufacture (Asian paint/ Berger paint/ICI paint/ J & N painVNerolac) to give an even shade including (i).Surfaces over 100mm in width or girth. a) General ouroose

Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects.... a) Sliding door bolts i) 300mm x 16mm

b) Tower bolts i) 300mm x 12mm

c) Door handles ii) 100mm

Providing and fixing Stainless Steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, oolishinq

Providing polished granite slab of approved quality, size,shape and thickness not less than 18 mm on floors, skirtings, treads and risers of steps over cement mortar bed 15 mm thick in prop.1:3 (iii) Deluxe Quality (i) With Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)

Grading roof for water proofing treatment with (a) Cement concrete 1:2:4 (cement: 2 coarse sand: 4 graded stone agg. 20 mm nominal size)

Water Supply and Sanitary work

Providing fitting and fixing Vitreous china Dual Flush I Floor Mounted Coupled I Extended water closet (European type W.C pan 400mm high) with seat and lead ,CP brass hinges A) Parryware make (i) Duke (inclusive of seat cover and fittings) (white/coloured) (Cat. No. C841 B/C) (S/P Trap)

Providing vitreous China wash basin with Cl/MS brackets, C.P brass chain with plug,PVC waste pipe including painting of fittings and brackets ,cutting and making good the walls wherever required. (b) Coloured (i) Cascade NXT 550 x 440 with long Pedestal (Cat. No.C0404/C0380)

Providing, fitting and fixing CP soap tray I soap dish complete as directed and specified (i) Jaquar Make (b) Queen's (Cat.No.AON- 7731)

Providing fitting and fixing Decorative Mirror complete as directed and specified. (A) . Parrvware Make (b) Size 600mm x 450mm

Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISi approved including joining ,fitting and fixing wiyh clamps etc.as necessary complete at all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches. (ii) 11Omm dia

(v) 63 mm dia.

C.P. Grating (iii) 75mm dia

Supplying, fiting and fixing PVC flushing cistern with all internal fittings with Cl brackets including fitting and fixing standard size CP flush pipe, union clamps etc. compete as directed and specified

Construction of filter bed in soak pit including earth work in excavation of soiland then filling up of the trench with brick bats/Charcoal covered with earth over a layer of AC. plain sheet above brick bat filling complete as directed .

Construction of inspection pit inside measurement 450mm x450mm x450mm flush with 1OOmm diameter HCl/PVC pipes and cement concrete base in proportion 1:3:6 over flat brick solinQ, 12cm

Providing and fixing Chlorinated Polyvinyle Chloride (CPVC) Pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass ... (A)) Exposed or in trenches c) 25 mm nominal outer dia pipe

(B) Concealed pipe with cutting chases & making good the walls a) 15 mm nominal outer dia pipe

Providing fitting and fixing PVC cowel of ISi make complete as directed and specified. (v) 63mm dia. PVC cowel of ISi make

Supplying fiting and fixing PVC Plain single tee of (Supreme/ Prince) or other ISi approved including joining, fitting and fixing etc.as necessary complete at all levels including below G.L. as directed and specified. (ii) 110mm dia.

Supplying, fitting and fixing 87.5 degree PVC bend of (Supreme/Prince) or other ISi approved including joining ,fitting and fixing etc.as necessary complete at all levels a) In exposed surfaces or in trenches. (ii) 11Omm dia.

Supplying fitting and fixing chrome plated (C.P.) stop-cock of approved brand and size as mentioned below as directed and specified.(G.I. & C.P pipes will be measured and paid separately) (i) Jaquar (a) Continental I Clarion (i)15mm dia Male I Female (long thread)

Supplying and fitting fixing C.P. pillar cock of 15mm dia of approved brand as specified and directed. (II) Jaguar make (a) standar

Supplying fitting and fixing C.P. bib cock 15m. dia of approved brand as directed and specified. (G.I. & C.P pipes will be measured separately) (ii) Jaquare make (a)Continental /Clarion (i)Standard

Supplying and fitting gun metal country pit valve (full way valve) l.S.I. Make as specified and directed. c) 25 mm dia.

Supplying and placing plastic cylindrical vertical claused top (PCVC) tank of Sintex I Polycon I Patton make over the stagging with manhole cover with locking and cleaning arrangement including providing pads of size as required for inlet and outlet pipes (iii) 1000 litre capacity (a) Sintex make

Labour for boring hole for inserting tube well pipes through different soil/ rock media including hire charges of drill pipes, scaffolding, tools and ii) Bore hole of 125mm diameter

Supplying, fitting and fixing pipes plain/bevel ended for casing,conforming to relevant IS codes of practice including supplying and fitting of tube well accessories, lowering of assembly pipes concentrically in the borehole followed by supplying and packing of pea gravel free from dirt, (II) PVC PIPE ii) 110mm diameter

Supplying, fitting and fixing suction pipes plain/bevel ended, conforming to relevant IS codes of practice including supplying and fitting of accessories, lowering of assembly pipes concentrically in the casing B) PVC PIPE iii) 40mm diameter

Supplying fitting and fixing ISi approved PVC filter 3.00 metre lonq.i) 40mm diameter

Flushing, clearing, washing and watering of the tube well

Supplying fi ing and fixing PVC reducer of (Supreme/Prince) or other ISi approved including joining , fitting and fixing etc. a) In exposed surfaces or in trenches. (v) 110mm x 63 mm

Supplying fitting and fixing check valve (non return valve) including thread to pipes. iii) 40mm diameter

Providing fitting and fixing vitreous china flat back type lipped front urinal basin of with automatic flushing cistern with standard flush pipe and CP brass spreader A) Parryware make (a) White (i) Integrated EFS-Smart DC (Cat No.C8182l

Providing fitting and fixing vitreous china squatting plate urinal with automatic flushing cistern with standard flush pipe and CP brass spreader A) Parryware make (i) White (Cat. No. C0503)

RCC Drain

Earth work in excavation for foundation tranches of wall , retaining walls , foot ing of column, step , septic tank etc . including refilling the quantity as necessary after completion (a) In ordinary soil

Providing soling in foundation and under floor with stone/ best quality picked Jhama brick , sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering , complete . (a). Brick on flat soling

Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps , walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete ( shuttering where necessary shall be measured and paid separately) . (a) ) In prop 1cement 3 sand :6

Supplying, fitt ing and fixing in position reinforcement bars conforming to relevant l.S. Code for RC.C. work/ RB. walling including straightening , cleaning , cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. a) From Primary Producer: TATA/SA IL/Esser Steel ( ii)Super Ductile (SD) TMT reinforcement bars

Providing form work of ordinary timber planking so as to give .a rough finish including centering , shuttering , strutting and propping etc. , height of propping and centering below supporting floor to ceiling not exceeding 4 . 0M and removal of the same for in-situ reinforced concrete and plain concrete work in: Vertical surface such as walls (any thickness) . parapet walls. partitions. walls of septic tank . inspection pit and the like including attached pilasters butresses . plinth and string courses and the like. (i) )tJsing 25mm thick plank

Sides and Soffits of Beams, beam haunchings , cantilever girders , bressumers. lintels and horizontal ties. (i) Using 25mm thick plank

Providing and laying plain/reinforced cement croncrete works cement . coarse sand & 20mm down gri:tded stone aggregate including dewatering :f necessary , and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (i) Using mixture machine (A) In substructure up to plinth level Foundation. footing , columns with base tie and plinth beam, pile cap, base slab. retaining walls , walls of septic tank, inspection pit and the like and other works not less than 1OOmm thick up to plinth level. b) M20 grade concrete or Prop 1•1.5 :3

Cement plaster skirting with cement mortar in prop 1: 3 ( 1 cement 3 coarse sand) finished with a floating coat of neat cement including rounding of Junctions with floor . (a) 15 mm thick

Brick boundary Wall

Earthwork in excavation for foundation trenches of walls; retining walls, footings of column, steps, septic tank etc. including refilling (return filling} the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as direct\ d and specified in the following classification of soils including baiting out water where necessary as directed and specified . A) Upto a depth at 2m below the existing ground level (a) In orainary soil.

Providing brick soling in foundation and under floor with s{one/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering , complete . (a).Brick on flat soling.

Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls-, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measl.!red and paid separately). (a) In prop 1cement: 3 sand :6 coarse aggregate by volume

Supplying, fitting and fixing in position reinforcement bars conforming to relevant l.S. Code for R.C.C. work/ R.B. wal!ing including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and bindir with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. B) ISi approved super ductile TMT Bar i) TATA I SAIL

Providing and laying plain/reinforced cement croncrete works cement with coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) A) In sub - structure up to plinth level Fou11dation, footing, columns with base tie and plinth bearri, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level. (b) M20 in prop. 1:1.5:3

B) Super-structure from plinth level upto 1st floor level. ii) Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and sport, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (except spiral staircas and landing ) including preparing the top surface and finishing of nosing. (b) M20 or Prop. 1:1.5:3

Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and prnppjng etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work in: Foundation, footings, bases of columns , pile cap, raft and mass concrete works etc. ii) 0sing 25mm thick plank

3.1.1.2 Sides of tie beams, grade beams etc. at or below ground level. ii) Using 25mm thick plank

Columns, Pillars, Posts & Strut (a) Square, Rectangular, polygonal in plan or any shape like Tee/L etc. having plane vertical face ii) Using 25mm thick plank

Sides and Soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties. ii) Using 25mm thick plank

Brick work in cement morter with 1st class brick including racking out joints and curing complete as directed. b). In cement mortar in proportion 1:4.

112 mm thick 1st class brick nagged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level {protruding M.S rod/Tor steel of column to be embeded in cement mortar and will be measured and paid separately) b). In cement mortar in proportion 1:4.

15 mm thick Cement plaster in single coat on rough side of single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complte as directed. (A) On rough side b) In prop. 1:4

Finishing old I new wall with water proofing weather coat smooth anti-fungal exterior painting of approved make of Berger paint of required,shade after cleaning and clearing the surface etc. including scaffolding complete as direqted at all levels (two coats)

Raising low site around the building with approved soil obtained from outside by truck carriage including breaking clods, ·dressing etc. complete including paying necessary forest royelty, sales tax, land compensation, municipal gate fees, if any monopoly duty etc; (pJofile measurement to be taken and 12.5% deduction for shrinkage to be made from total quantity) etc. complete as directed and specified. (b) Other than Guwahati city

Gate with RCC post

Earth work in execavation for foundation trenches of walls,retain ing walls, footings of colnm..............specified A) Upto a depth at 2m below the existing ground leyel (a) In ordinary soil.

Providing brick soling in foundation and under floor . with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering , complete . (a).Brick on flat soling.

Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately). (a) In prop 1cement: 3 sand :6 coarse aggregate by volume

Supplying, fitting and fixing in position reinforcement bars conforming to relevant l.S. Code for R.C.C. work/ R.8. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. B) ISi approved super ductile TMT Bar i) TATA I SAIL

Providing form work of ordinary .timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling r:iot exceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work in: Foundation, footings, bases of columns, pile cap, raft and mass concrete works etc. ii) Using 25mm thick plank

Sides of tie beams.. ii) Using 25mm thick plank

Columns, Pillars, Posts & Strut -(a) Square, Rectangular, polygonal in plan or any shape like Tee/L etc. ... ii) Using 25mm thick plank

Providing and laying plain/reinforced cement croncrete works cement with coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) A) In sub - structure up to plinth level Foundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaiing walls, walls of septic tank, inspection pit and the like and o herworks not less than 100mm thick up to plinth level. • (b) M20 in prop. 1:1.5:3

B) Super-structure from plinth level upto 1st floor level. ii) Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (b) M20 or Prop.-1:1.5:3

15 mm thick Cement plaster in single coat on rough side of single or half brick wall for interior plastering up to 1st floor ievel including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed. (A) On fair side b) In prop. 1:4

b) Finishing wall with water proofing cement paint of approved brand and. manufacture and of required.shade on new wall surface (two coats) to give aneven shade after throughly brooming the surfaces to remove all dirt and remains of loose powdered

Supplying, fitting and fixing double leaf heavy duty iron gate, frame made from 50mm x6mm M.S. flat iron with another horizontal flat at the middle, 20mm dia M.S bars at 200mm apart from bottom flat to top flat and 20 mm dia M.S. bars at 200mm apart from bottom flat to middle flat including drilling, welding etc. complete

Septic Tank

Earth work in excavation for foundation tranches of wall, retaining walls, footing of column, step,septic tank etc. including refilling the quantity as necessary after "completion ..................... ... ...... ..... (a) In oridinarv soil"

Providing soling in foundation and under floor at all levels with ston/ best quality picked jama ficks sand packedf and laid to level. And in panel preapering the subgrade as directed..... (a) Brick on flat solinq

Plain cement concret work with course agg. Of sizes 13 mm to 32 mm in foundation bed for footing, steps, walls, bricks work etc. (a) In prop: 1:3:6

Supplying fitting and fixing in position reinforcement bars conforming to relevant l.S. code for R.C.C /R.B. walling including straightening , cleaning . cutting and bending to proper shapes and length as per details. b) Other ISi approved TMT reinforcement bar (a) From primary producer (ii) Super Ductile TMT bar

© ISi aooroved M.S. Rod

Providing and laying plain/ reinforced cement concrete work in prop 1:1.5:3 (a) In substructure upto plinth level. Foundation, footing, columns with base, tie and "plinth beam (b) M20 in prop. 1:1.5:3"

Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M Sides of tie beams, grade beams etc. at or below ground level. ii) Using 25mm thick plank

Brick work in cement morter with 1st class brick including racking out joints and dewatering if necessary, and curing complete as directed in sub-structure up to plinth level. a) inprop 1:4

1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of column to be embeded in cement mortar and will be measured and paid separately) (A) 112mm thick brick wall a) in prop 1:4

Cement plaster skirting with cement mortar in prop. 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement including rounding of junctions with floor. (a) 15mm thick

Providing precast R.C.C slab over drain ,septic tank etc. in prop. 1:2:4 reinforced with 1Omm M.S. bar @ 150mm centre both ways tying with 20 gauge black annealed wire with necessary shuttering , curing etc. complete including fixing in position as directed. (a) 1OOmm thick slab

Electrical Work

Wiring for light/fan/call bell point with 2xl.S sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable ER conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts in surface/ recessed conduit wiring system with 20mm dia 2mm thick I heavy rigid PVC IS: 9537 Part - Ill conduit including 6 Amp flush type switch/ bell push GI/ MS switch board (ISi marked) with phenolic laminated sheet cover ,ceiling rose etc. complete Short point up to 3.00 metre. length.

Medium poin. t up to 6.00 metre."Length.

Long point up to I0.00 metre. Length.

Wiring to a 5 pin 6 Amp.s plug point..... as required complete, when placed elsewhere. Long point up to 10.00 metre. Length.

Wiring for 5/6 pin 16 Amps power plug point with 4 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cabel FR conforming to IS-694 : 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts in surface/ recessed conduit wiring system including and fixing 5/ 6 pin 16 Amps flush type socket outlets and 16 Amps flush type switch GI/ MS switch board (1.S.I. mark with phenolic laminated sheet cover earth continuity with 2.5 sq. mm cable to the 3rd pin of the socket as required complete with 20 mm. dia. 2mm thick/ heavy ISi marked IS: 9537 PART - Ill rigid PVC conduit Long point up to 10.00 metre. Length.

Extra long point up to 15.00 metre. length.

Wiring for 5 pin 6 amp plug ....when fitted on same board of light and fan.

Wiring for circuit wiring with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel or Equivalent Make as approved by the Deptt.) in surface/ recessed PVC conduit wiring system . With 2 x 1.5 sq. mm. cable in 20 mm dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - Ill conduit.

With 3 x 1.5 sq . mm.. cable in 20 mm dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - Ill conduit.

Wiring for drawing sub- main line with P.V .C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade •up to 1100 volts (Finolex /RR Kabel or Equivalent Make as approved by the Deptt.) PVC conduit . (Berlia/ AKG I Precision/ Presto Plast/Polycab/ Mw• or equivalent make as approved by the Deptt.) including earth continuity in surface/ recessed 20 mm. dia. 2mm thick/ heavy 151 marked IS: 9537 PART - Ill rigid PVC conduit wiring system . With 2 x 2.5 sq. mm. + earth continuity with xJ..S sq. mm. in 20 mm. dia. 2mm thick/ heavy r.igid PVC IS: 9537 Part -III

With 2 x 4 sq. mrri'. + earth continuity with x2.5 sq. mm. cable in 20 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - Ill condu it

With 2 x 6 sq. mm. + eart-h continuity with x 4 sq. mm. cable in 25mm thick/ heavy rigid PVC IS: 9537 Part - Ill condu it

With 2 x 10 sq. mm. + earth continuity with x 6 sq. mm. cable in 25 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - Ill conduit

Wiring for drawing sub-main line with P.V .C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts in surface/ recessed PVC 20 mm. dia . 2mm thick/ heavy ISI marked IS: 9537 PART-Ill rigid PVC conduit wiring system. With 4 x 10 sq. mm. + earth continuity with 2x6 sq. mm. cable in 40 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537

With 4 x 16 sq. mm. + earth continuity w ith 2x10 sq. mm. cable in 40 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part-Ill conduit

Supplying including and fixing of following Metal boxes for MODEL RANGE LEGRAND (MYRIUS), in surface/ recessed system complete as per direction of department. 1-2 module type Metal

3 module type Metal

4-5 module type Metal

6-8 module tyee Metal

10 module type Metal

Supplying including fitting and fixing of following front plate of suitable colour MODEL RANGE LEGRAND (MYRiUS), ANCHOR (VIOLA), as per direction of department. 1module

3module

4module

5module

6module

8module

10module

Supplying with fitting and fixing of electronic modular fan speed controller 2 • module type MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), including making necessary connect ion as per direction of department . 100 watt electronic modular 4 step speed control 2 • module type

Supplying with fitting and fixing of 6 amp one way modular clip in bell push MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), CHNEIDER (VIVACE), CRABTREE including making necessary connection as per direction of department

Supplying including installation of socket outlet 6/16 Amps 3/5 pin combine shuttered complete , MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA),SCHNEIDER (VIVACE), CRABTREE including making sary connection as per direction of department.

Supplying including installation of socket outlet 6 Amps 3 pin universal combine shuttered complete , MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), including making necessary connect ion as per direction of department

Supply ing with fitting and fixing of 6 amp one way modular clip in switch, MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK including making necessary connection as per direction of department.

Supplying with fitting and fixing of 16 amp one way modular clip in switch with LED, MODEL RANGE LEGRAND (M,YRIUS) , ANCHOR (VIOLA), CRABTREE including making necessary connection as per direction of department.

Supplying including fitting and fixing of following star rated A .C. Ceiling fan complete with all accessories like down rod, canopy etc. of following sweeps with making necessary connection cable, as approved by the Deptt.s etc. as required complete and as directed by the Department [ without regulator] . {ORIENT PSPO make I Usha make/ CROMPTON make/ Havells/ ATC/ V GAURD make) Energy efficient 5-star 1200 mm sweep Fusion 5 star (Havells or equivalent make)

Supplying with fitting and fixing of T S luminaries complete with all accessories such as ballast, starter etc. directly on wall / ceiling including connection cable, as approved by the Deptt. with 1.5 sq mm P.V.C. insulated S.C. copper conductor as required and as directed by the department LHDT01128632 1X 28W TS FTL Havel’s or equivalent make E- LITE DESIRE Surface Decorative ultra slim fixture with extruded aluminum body, prismatic diffuser, snap on installers & HF electronic ballast suitable for TS FTL or equivalent

Supplying including installation, connection cable, as approved by the Deptt. with 2x2 .5 sq mm copper FR CABLE, testing and commissioning of following street light/ FLOOD LIGHT on existing pole/ Structure including lamp, driver, ballast as required complete as directed and specified by the deptt. 4SW, Type GREEN LINE BRP 320lx24LED PHILIPS make. or equivalent .

Supplying and fixing of batten holder (Anchor Penta PC CHERRY /Gold medal /Kolor kany.kom/Havells or equivalent make as approved by the Deptt.) including connection as approved by the Deptt. as required ( without Lamp)

Supplying and fitting of 18/20 Watt LED/CFL lamp in the existing batten holder/angle holder/decorative bracket/bulk head fitting/ pendent holder etc . a specified and directed by the deptt.

Supplying and fixing of Call bell ( Buzzer ) including S/ 6 amp capacity button piano type bell push switch including connection as approved by the Deptt. as required.

Supply ing with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double dobr (IP-43) surface mounting SPN MCB DB incorporated with bas- bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified - nd directed by the deptt. 6 way SPN double door

8 way SPN double door

Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof (IP-43) double door surface mounting TPN MCB DB incorporated with bas-bar, Neutral link, Earth bar "and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete w ith making necessary connection as approved, specified and directed by the deptt. 4 way TPN (4+12) double door

Supplying with fitting and fixing single Pole 10 KA 240/415V SOHz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. C Series (Schneider MG, legrand, Hager, Crabtree xpro 6 to 32A

Supplying w ith fitting and fixing DP 10 KA 240/415V SOHz MCB of the following capacity complete with making nece,ssary connection as approved, specified and directed by the deptt. 40A .

Supplying with fitting and fixing panel mounting open execution 415V 50Hz 4P MCCB with Microprocessor Release (lcs=lcu, adjustable Over Load and Short Circuit setting, without enclosure of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 36KA (ABB, Schneider, legrand, L&T, Siemens, C&S make) 100A

Supplying with fitt!ng and fixing 4P 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 63A

Supplying with fitting and fixing 30/100/300mA sensitivity 240/415V 50Hz DP RCCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.30mA sensitivity DP RCCB 40A

Supplying including fitting and fixing of following A .C. Exhaust fan in the existing hole on the wall of following sweeps with making necessary connection as approved by the Deptt. as required complete and as directed by the Department. Ventil Air DB 230 mm sweep (Havells Make)

Supply, installation & testing of Copper Plate earth station with 600 mmx600 mmx3 mm copper earth plate with necessary 40 mm dia. G.I. medium duty watering pipe with G.I. Fittings such as Socket, Tee, elbow, nipple and 50 mmx40 mm G.I. reducing socket for funnel including locking arrangement with 300 mmx300 mmx6 mm C.I. hinged cover plate complete with digging of 1 earth pit, construction of brick chamber and plastering of both inner & outer surface of wall as specified directed by the deptt

Extra for using salt 5 Kg and Charcoal 96 Kg in G.l./Copper plate Earth Station pit to provide low impedance ground in location of high soil resistivity as and when required and specified by the deptt

Supplying including installation,. connection as approved by the Deptt.,-testing and commissioning of CENTRIFUGAL MONOBLOCK PUMP SET complete as dir.ected and specified by the deptt.

Supplying including installation,. connection as approved by the Deptt.,-testing and commissioning of CENTRIFUGAL MONOBLOCK PUMP SET complete as dir.ected and specified by the deptt. 1HP single Phase Centrifugal monoblock pump set

Supplying with installation testing and commissioning of Hi -- wall 5 STAR rating non ducted split type air conditioner of the follow ing capacity with cordless remote complete with indoor and outdoor unit, copper pipe and electrical connection as approved by the Deptt.)up to 5 m between the room unit and out door unit as directed by the department .3 . Blue Star make) Model 4WAE181YA

Supplying with fitting and fixing Single Phase D.O.L Starter of the following specification complete including making necessary connection as approved, specified and directed by the deptt. Overload Relay Range 6.0 -9.3 Amps for 3.7 KW

Supplying with fitting and fixing Voltage stabilizer of the following specification complete including making necessary connection as approved, specified and directed by the deptt. (SKYLAND I Vee-Dee / V GUARD / VERTEX/ INDO/ VENUS make) 4.0 KVA Automatic Input 90-280 V Out put 200-240 V

Supplying including installation of Inverter (Su-Kam/ Microtech/ V- Guard/ Luminous) with Battery and its case as per direction and specified by the Deptt. Sine wave Inverter 1400 VA/240 V

Supply and laying of following size PVC/XLPE insulated and PVC sheathed 1.1 KV Grade Solid Aluminium conductor 1988 armoured U.G. cable U.G. cable laid in ground/partially in air (as required for termination over ground including excavation of cable trench up to depth of 75cm, refilling, protective brick covering, Sand cushioning etc complete handling of surplus spoil, debris et to proper place as specified and directed by the deptt. 10.00 Sq.mm 2 Cor . oured U.G. cable

25.00 Sq.mm 4 Cor . oured U.G. cable

Supply and laying of following size Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables LT armoured U.G. cable laid in pucca flooring, road crossing, drain crossing as per site requirement and par't"ially in air to connection as approved by the Depts. the control switch, through medium duty G.I. pipebend and socket including excavation and refilling the trench and making good damage done as specified and directed by the deptt. 10.00 Sq.mm 2 Core U.G. cable in 25mm dia medium duty G.I. pipe

25 .00 Sq.mm 4 Core U.G. cable in 40mm dia medium duty G.I. pipe

Add for Supervision Charge, Estimated cost, Load Security, Meter etc to be paid to APDCL for load (Approx) 9.82 KW

Sub-Soil investigation

KUSHAL KONCH