REPAIR MAINT OF ELECTRICAL WIRING AND REPLACEMENT OF ELECTRICAL FITTINGS AND FIXTURES OF CEILING FAN DISTRIBUTION BOX AND BLDG SECURITY LIGHT OF ZONE A AT JALIPA MIL STATION UNDER GE ARMY BARMER

Amount

Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete, including unserviceable fixture and fittings such as switches, ceiling rose, holder, pendents, regulators, sockets, light fittings etc . & removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls,floors, etc, complete all as specified and directed.

Taking down un-serviceable DB of any size and capacity including MCB etc, and removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls,floors, etc, complete all as specified and directed .

Taking down unserviceable sub main wiring with copper/aluminium conductor,PVC insulated,unsheathed cable of any size drawn through and including rigid PVC or PVC casing caping including earth wire and making good disturbed surfaces of walls,floors, etc, complete all as specified and directed.

All as per Sl item No.03 above but without taking down steel conduit

M&L Point wiring using approved colour coding as per IS (Red , Black and Green for single phase circuits),with multi stranded copper conductor, nominal cross-sectional area is 1.5 sq mm , single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade, ISI-694 marked with valid CML No.in and including heavy duty drawn through and including in PVC rigid conduit with all accessories complete concealed in wall/roof/floor etc, ISI marked with1.6mm thick mild steel/prestressed steel sunken/concealed box (with earth dolly) duly painted two coats of anti corrosive paint/aluminium paint over a coat of red oxide primer internally and two coats of black bituminous paint over a coat of red oxide primer externally, with 3 mm thick plastic laminated sheet cover for fixing of switches, sockets and fan regulators etc, inciuding PVC insulated multistranded copper conductor 1.5 sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly for,one way switch One light/ fan/bell point controlled by one, one way switch complete all as specified and directed . Note:- surface conduit shall be laid in ceiling portion only.

All as per Serial Item No.5 above but for one light point controlled by two Nos. of, two way switches.

All as per Serial Item No.5 above but for one 3 pin socket outlet 5 Amps on the same board with other switches.

All as per Serial Item No. 5 above but one 3 pin socket outlet 5 Amps on independent board.

All as per serial Item No. 5 above but for 15 Amps 5/6 pin socket point on independent board with 4.00 Sqmm PVC insulated FRLS multi-stranded copper conductor with 4.00 Sqmm PVC insulated FRLS multi-stranded copper conductor as earth wire.

M&L Point wiring using approved colour coding as per IS (Red , Black and Green for single phase circuits),with multi stranded copper conductor 1.5 sq mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade, ISI-694 marked with valid CML No. drawn through and including PVC casing & caping with all accessories (like Tee, Bends etc) & fittings complete fixed on wall / roof / floor etc, ISI marked with1.6mm thick mild steel/prestressed steel sunken/concealed box (with earth dolly) duly painted two coats of anti corrosive paint/aluminium paint over a coat of red oxide primer internally and two coats of black bituminous paint over a coat of red oxide primer externally, with 3 mm thick plastic laminated sheet cover for fixing of switches, sockets and fan regulators etc, inciuding PVC insulated multistranded copper conductor 1.5 sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly for,one way switch One light/ fan/bell point controlled by one, one way switch complete all as specified and directed .

All as per Serial Item No.10 above but for one 3/5 pin socket outlet 5 Amps on the same board with other switches.

All as per Serial Item No. 10 above but one 3/5 pin socket outlet 5 Amps on independent board

All as per serial Item No.10 above but for 5/15 Amps 5/6 pin socket point on independent board with 4.00 Sqmm PVC insulated FRLS multi-stranded copper conductor with 4.00 Sqmm PVC insulated FRLS multi-stranded copper conductor as earth wire

All as per Serial Item No.10 above but wiring in existing conduit / casing & caping for one way switch One light/ fan/bell point controlled by one, one way switch 5Amps

All as per Serial Item No.11 above but wiring in existing conduit / casing & caping for one 3 pin socket outlet 5 Amps on the same board with other switches

All as per Serial Item No.11 above but wiring in existing conduit / casing & caping for one 3 pin socket outlet 5 Amps on independent board

All as per serial Item No.10 above but wiring in existing conduit / casing & caping for 15 Amps 5/6 pin socket point on independent board with 4.00 Sqmm PVC insulated FRLS multi-stranded copper conductor with 4.00 Sqmm PVC insulated FRLS multi-stranded copper conductor as earth wire

M&L Point wiring with 1.5 sq mm nominal cross sectional area, PVC insulated multistranded, 1100 volts grade copper conductor single core FRLS cable, drawn through with and including non metallic PVC conduit and its accessories complete concealed in walls / roof / floor etc. including one run of 1.5 sqmm PVC insulated copper conductor cable green in colour for continious earthing, including steel box of required module for modular switches/socketes complete all as specified and directed. Note:- surface conduit shall be laid in ceiling portion only.

One light/ fan/bell point controlled by one way switch

One 3 pin 5 amps socket point on independent board

One 3 pin 5 amps socket point on same board

One bell/buzzer point controlled by bell push.

One light controlled by two way switch

M&L Point wiring with 4 sq mm nominal cross sectional area, PVC insulated multistranded, 1100 volts grade copper conductor single core FRLS cable, drawn through with and including non metallic PVC conduit and its accessories complete concealed in walls / roof / floor etc. including one run of 4 sqmm PVC insulated copper conductor cable green in colour for continious earthing, including steel box of required module for modular switches/socketes complete all as specified and directed. Note: Surfae conduit shall be laid in ceiling portion only

One 3 pin 5 amps socket point on independent board

M&L Ceiling rose, 3 phase/PVC/polycarbonate, isolated body complete all as specified and as directed.

S&F Modular Switch 1 way, 6 Amps, 1 module, 230 Volts complete all as specified and as directed.

S&F Modular Switch 1 way, 16 Amps, 1 module, 230 Volts complete all as specified and as directed.

S&F Modular Switch 2 way, 6 Amps, 1 module, 230 Volts complete all as specified and as directed.

S&F Modular Bell push, 6 Amps, 230 Volts complete all as specified and as directed.

S&F Modular Socket, 6 Amps, - 2/3 pin combined 2 module, 230 Volts complete all as specified and as directed.

S&F Modular Socket, 6 /16 Amps, - 2/3 pin combined 2 module, 230 Volts complete all as specified and as directed.

S&F Modular fan step regulator, 120 W - 2 module complete all as specified and as directed.

S&F Modular white cover plate with frame, 1 module complete all as specified and as directed.

All as per I.No. 28 but 3 module

All as per I.No. 28 but 6 module

All as per I.No. 28 but 8 module

M&L Switch piano, flush type, single pole, one way, 5/6 Amps, 230 Volts complete all as specified and as directed.

M&L Switch piano, flush type, single pole, two way, 5/6 Amps, 230 Volts complete all as specified and as directed.

M&L socket outlet , 5/6 Amps, 2 in 1, 3/5 pin 230 Volts complete all as specified and as directed.

M&L bell push, 5/6 Amps, 230 Volts complete all as specified and as directed.

M&L bell, ding dong / multi music type, AC, 230 Volts complete all as specified and as directed.

Submain wiring with two runs of 6 sqmm with one run of 6 Sqmm earth wire of 1100V grade FRLS PVC insulated multi-stranded copper conductor, single core cable conforming to IS 694 drawn through and including PVC casing & caping fixed on wall / ceiling with PVC saddles and cadmium plated steel screws and connected to common earth dolly complete all as specified and directed. Note :- Three runs of 6 sqmm and one run of PVC casing & caping shall be measured as one length for the purpose of measurement.

Submain wiring with two runs of 4 sqmm with one run of 4 Sqmm earth wire of 1100V grade FRLS PVC insulated multi-stranded copper conductor, single core cable conforming to IS 694 drawn through and including PVC casing & caping fixed on wall / ceiling with PVC saddles and cadmium plated steel screws and connected to common earth dolly complete all as specified and directed. Note :- Three runs of 4 sqmm and one run of PVC casing & caping shall be measured as one length for the purpose of measurement.

Submain wiring with two runs of 6 sqmm with one run of 6 Sqmm earth wire of 1100V grade FRLS PVC insulated multi-stranded copper conductor, single core cable conforming to IS 694 drawn through existing steel conduit and connected to common earth dolly complete all as specified and directed. Note :- Three runs of 6 sqmm shall be measured as one length for the purpose of measurement.

Supply & replacement of LED light fitting 1 X 10W bulk head luminaries, with lamp holders with all accessories including 10 W LED bulb including taking down old fitting complete all as specified and as directed Make : Havells Cat Part No.LHEXCGP7PN5W010 or techno commercially equivalent model of make Bajaj /Philips / CG / Wipro.

Supply & replacement of LED light fitting 20W with batten ( integrated driver), 6500K colour temp, decorative type with all accessories internally pre wired including tube rod and connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed Make : Wipro Cat Part No. D562065 or techno commercially equivalent model of make Bajaj /Havells / CG

Supply & replacement of LED tube rod ( integrated driver), 6000K colour temp, 4 feet long of 20 watt ( PC) in existing tube light fittingcomplete all as specified and as directed Make : Havells Cat Part No.LHEXCEP7UN1W020 or techno commercially equivalent model of make Bajaj /Philips / CG/Wipro

Supply & replacement of LED light fitting 10W with batten ( integrated driver), 6500K colour temp, decorative type with all accessories internally pre wired including tube rod and connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed Make : Wipro Cat Part No. D531065 or techno commercially equivalent model of make Bajaj /Havells / CG

Supply & replacement of LED bulb of 12 watt with 6500K colour temp, in existing fitting , incld taking down old existing bulb complete all as specified and as directed Make : Havells / Bajaj / Benlo /Wipro

Supply & replacement of LED bulb of 10 watt with 6500K colour temp, in existing fitting incld taking down old existing bulb complete all as specified and as directed Make : Havells / Bajaj / Benlo /Wipro

Supply & replacement of LED bulb of 7 watt with 6500K colour temp, in existing fitting including taking down old bulb complete all as specified and as directed Make : Havells / Bajaj / Benlo /Wipro

Supply & replacement of LED bulb of 5 watt with 6500K colour temp, in existing fitting incld taking down old existing bulb complete all as specified and as directed Make : Havells / Bajaj / Benlo /Wipro

Supply, fixing, connection & testing of LED Recess mounting 2 x 2 ft luminaire with high brightness suitable for Armstrong/grid ceiling 36 watt decorative type with all accessories internally pre wired complete and connection up with twin core twisted flexible copper conductor cable with suitable size, incld taking down old existing light fitting complete all as specified and as directed . Make : Bajaj / Havells / Philips / CG /Wipro

Supply,fix, connecting and testing of energy efficient, pressure die cast aluminium housing with heat resistant toughened glass with frame & IP-66 protection and impact resistance IK 07, LED street light luminaries 45 watt, fixed on pole or wall with GI tubing 25mm bore 1.20m long bent shape as required and 02 Nos brackets made with MS clamp 25x3 mm flat and connectiong up with twin core twisted flexible copper conductor cable with suitable size taking down old fitting complete all as specified and as directed Make : Havells Cat Part No LHETAXU7PN6J045 or techno commercially equivalent model of make Bajaj /Havells / CG /Wipro

M&L Ceiling rose, surface backlite, 65 x 50 mm, three terminals, 230 volts complete all as specified and as directed.

M&L PVC board of size 30cmX25cmX 5cm depth including taking down old board complete all as specified and as directed.

M&L PVC board of size 25cmX20cmX 5cm depth including taking down old board complete all as specified and as directed.

M&L PVC board of size 20cmX15cmX 5cm depth including taking down old board complete all as specified and as directed.

M&L Factory made distribution board in sheet metal enclosure in single door with out bus bar,SPN 2 way, 240V for fixing MCB's complete all as specified and as directed.

M&L Factory made distribution board in sheet metal enclosure in double door with 200A rated bus bar,SPN 4 way, 240V for fixing MCB's complete all as specified and as directed.

M&L Factory made distribution board in sheet metal enclosure in double door with 200A rated bus bar,SPN 8 way, 240V for fixing MCB's complete all as specified and as directed.

M&L Factory made distribution board in sheet metal enclosure in double door with 200A rated bus bar,TPN 4 way, 240V for fixing MCB's complete all as specified and as directed.

M&L MCB SPN ‘C’ Curve 10KA, 5 to 32 amps complete all as specified and directed .

M&L MCB SPN ‘C’ Curve 10KA, 40 amps complete all as specified and directed .

M&L MCB SPN ‘C’ Curve 10KA, 63 amps complete all as specified and directed .

M&L MCB SP ‘C’ Curve 10KA, 5 to 32 amps complete all as specified and directed .

M&L MCB TPN ‘C’ Curve 10KA, 63 amps, 415V complete all as specified and directed .

M&L Blankig plate for filling gap of MCB complete all as specified and directed.

PVC hylum sheet 3mm thick top cover of size 30cmX25cm including taking down old one complete all as specified and directed.

PVC hylum sheet 3mm thick top cover of size 25cmX20cm including taking down old one complete all as specified and directed.

PVC hylum sheet 3mm thick top cover of size 20cmX15cm including taking down old one complete all as specified and directed.

Ceiling rose, surface bakelite, 65 x 50 mm, three terminals, 230 Volts including taking down old one complete all as specified and as directed.

Lamp Holder, insulated body with back plate, 230 Volts for batten fittings including taking down old one complete all as specified and as directed.

Switch socket outlet 5 Amps 2-in-1,3/5 pin 230V AC flush type, including taking down old socket complete all as specified and directed.

Switch socket outlet, multipurpose, 2 in 1, 5 and 15 Amps, flush type, universal ,230 Volts controlled by one switch including taking down old socket complete all as specified and as directed.

M&L Switch piano, flush type, single pole, one way, 5/6 Amps, 230 Volts, incld. Taking down old switch complete all as specified and as directed.

M&L socket outlet , 5/6 Amps, 2 in 1, 3/5 pin 230 Volts, incld. Taking down old socket complete all as specified and as directed.

Electronic fan regulator, stepped type, 100 W, AC, 230 Volts, fixed on existing laminated sheet including taking down old regulator complete all as directed.

Electronic mini fan regulator, stepped type, 100 W, AC, 230 Volts, fixed on existing laminated sheet including taking down old regulator complete all as directed.

Taking down ceiling fan / Wall mounting fan of any size and sweep from its position and dismantling for servicing including removal of bearing, bushes, condenser, connector, flaxible cord,split pin etc if required, removing old grease and refill fresh, lubricating bushes alongwith new washers, cleaning and washing fan blades & fan body with soap solution after repairing and re- assamble the same including provision of twisted twin core flexible wire upto 0.7m long of size 28/0.0076 (ISI marked) and connecting to electric system, testing etc and hanging to position / to any location in Jalipa Stn incld. making good disturbed surfaces to matches with existing surfaces complete all as specified and as directed . Note: -(i) Spare parts shall be measured and paid separately as supply only. (ii) Quoted rate is deemed to be inclusive of taking down unserviceable/ defective parts and fixing with new parts. (iii) Quoted rate is deemed to be inclusive of transporting fan from any location in Army Area to MES store yard / workshop.

Taking down of exhaust fan 9" (230mm)/12" (300mm) / 15" (375mm)/ 18" (450mm) sweep from any location inside Jalipa Mil Stn transporting to MES E/M Store Yard / Workshop for servicing of fan, washing thoroughly of bearing / bush by petrol, washing / cleaning fan blade & body thoroughly including provision of new greasingand replacement of worn-out / defective unserviceable parts (wherever necessary), re assembling the same after defective / unserviceable parts is replaced including provision of twisted twin core flexible wire upto 0.7 mts long size 23/0.0076 (ISI marked) and re-fixing the same at the same location/other location including making good disturbed surface & to match with existing sufaces and testing complete all as specified and as directed . Note: -(i) Spare parts shall be measured and paid separately as supply only (ii) Quoted rate is deemed to be inclusive of taking down unserviceable/ defective parts and fixing with new parts. (iii) Quoted rate is deemed to be inclusive of transporting fan from any location in Army Area to MES store yard / workshop

S&F Bell push, flush type, 5 Amps, 230 Volts, incld taking down old bell complete all as specified and as directed.

S&F Bell ding dong / multi music type, AC, 230 volts, single pole, incld taking down old bell complete all as specified and as directed.

Spray painting of ceiling fan, fan blades, down rod, canopy etc with a coat of Ist quality synthetic enamel paint of approved colour and quality including preparation of old painted surfaces, cleaning etc and printing the fan numbers etc with black paint complete all as specified and as directed.

Supply only fan blades (set of three) of any make / type of exhaust fan of size 230/300 mm sweep complete all as specified and as directed .

Supply only fan blades (set of three) of any make / type of ceiling fan/ wall mounting fan of size 1200mm sweep complete all as specified and as directed .

Supply only fan blades (set of three) of any make / type of ceiling fan of size 1400 mm sweep complete all as specified and as directed .

Supply only U clamp complete with nut bolt washer, split pin and rubber weel etc complete all as specified and directed by engineer in charge.

Cutting and taking out old burnout winding of any sweep ceiling fan and rewinding with same gauge of copper winding wire of superior quality including insulation materials varnishing etc and testing complete all as specified and as directed .

Cutting and taking out old burnout winding of 230 mm sweep exhaust fan and rewinding with same gauge of copper winding wire of superior quality including insulation materials varnishing etc and testing complete all as specified and as directed .

Cutting and taking out old burnout winding of 300 mm sweep exhaust fan and rewinding with same gauge of copper winding wire of superior quality including insulation materials varnishing etc and testing complete all as specified and as directed .

Supply only ball bearing suitable for ceiling fan / exhaust fan of any sweep complete all as specified and as directed.

M&L MCB SP ‘C’ Curve 10KA, 5 to 32 amps, incld. Taking down old MCB complete all as specified and directed .

M&L MCB SPN ‘C’ Curve 10KA, 5 to 32 amps, incld. Taking down old MCB complete all as specified and directed .

M&L MCB TPN ‘C’ Curve 10KA, 63 amps, 415V, incld. Taking down old MCB complete all as specified and directed .

Supply only gun metal bush suitable for exhaust fan of any sweep complete all as specified and as directed.

Supply only gun metal bush suitable for ceiling fan of any sweep complete all as specified and as directed.

Supply only condensor 2.5 MFD suitable for ceiling fan of any sweep complete all as specified and as directed.

Supply only for replacement metalic bottom plate of ceiling fan of any sweep to match with existing fan complete all as specified and as directed.

Spray painting with two coats of painting to exhaust fan any type and size with Ist quality synthetic enamel paint, colour as approved after removing existing paint by scrubbing, dusting etc and finally writing the fan numbers etc with paint (Colour as approved ) complete all as specified and as directed.

S&F in replacment 230mm sweep Exhaust fan plastic body minimum three star rating with accessries complete all as specified and as directed .

S&F in replacment 1200mm sweep ceiling fan minimum three star rating with 4step regulator complete all as specified and as directed.

Supply and fixing single pole neutral enclosure with two pin and earth plug and socket modular type complete with one single pole MCB 20 Amps Make: havells/legrand/schneider

M&L for earthing complete with galvanized steel earth plate electrode of size 60cm x 60cm x 6mm thick burried directly in ground vertically at a depth not less than 2.25 metre deep below normal ground level with top edge of the plate not less than 1.5 metre below normal ground level surrounded from all sides by 15 cm thick packed layer of charcoal dust and common salt, filling in alternate layer and electrode connections by using galvanized iron earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers made of galvanized iron or steel and protected by light grade 15 mm dia GI pipe connected to main switch board or main control board, and GI pipe light grade 20 mm bore for watering and including funnel, wire mesh, RCC pit cover and PCC chamber pit with PCC 1: 2: 4 type C2 including excavation and earth work, disposal of surplus soil to a distance not exc. 50 mtr all as specified and as shown on Plate No 5 of SSR Part I (1991)incl dismanteling of existing unserviceable earth pit all as specified and directed by Engr-in-Charge.

SANJOLI CONSTRUCTION COMPANY

M.D. CONSTRUCTION CO.