SPECIAL REPAIR TO OR MD ACCN BLDG NO P-48 (TOTAL QTRS) IN NEW KSE OF 45 CAV AT PATIALA MIL STN

Amount

Taking down cement plaster of any description, any thickness from external surfaces of walls/soffits etc. incl raking out joints, hacking for keys, scrubbibg down with water etc complete all as specified and directed by Engineer-in-Charge.

M&L for cement plastering 15mm thick in cemet mortar 1:4 including mixing of liquid water proofing compound as per manufacturer's instructions on brick work or concrete surfaces or in chajjas/parapet walls etc finished even and smooth without using extra cement directed complete all as specified and as directed by Engineer-in-Charge.

Supply only liquid water proofing compound complete all as specified and as directed by Engineer-in-Charge.

Supply only chicken wire mesh 22 gauge of size not less than 20X20 mm complete all as specified and as directed by Engineer-in-Charge.

M&L for cement plastering 10mm thick in cemet mortar 1:6 on brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.

M&L for cement plastering 5mm thick in cemet mortar 1:3 as on ceilings or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.

Complete removal of existing treatment of any type/description from walls/RCC surfaces etc with mechanical means/grinder complete all as specified and as directed by Engineer-in-Charge.

Complete removal of existing treatment of any type/description from ceilings/RCC surfaces etc with mechanical means/grinder complete all as specified and as directed by Engineer-in-Charge..

M & L for Applying two coats of oil bound distamper white or tinted incl one coat putty over a coat of primer on walls incl preparation of New surface of wall all specified and directed by Engineer-in-Charge.

M & L for Preparation of new plastered surfaces of ceiling and applying three coat of white wash on ceiling surfaces all specified and directed by Engineer-in-Charge.

M & L for Applying two coats of exterior emulsion paint (light shade) by using roller incl one coat putty to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over & including a coat of exterior wall primer complete all specified and directed by Engineer-in-Charge.

Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame all specified and directed by Engineer-in-Charge.

Taking down chowkhats or frames (without taking off shutters from the frame) n. exc 1.5 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all specified and directed by Engineer-in-Charge.

S&F factory made Pressed steel door frames size 105x60mm made of MS sheet of 1.20 mm thickness for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete including a shop coat of primer all as specified and directed by Engineer-in-Charge.

S&F factory made Powder coated Pressed steel door frames size 125x60mm made of MS sheet of 1.20 mm thickness for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., including a shop coat of primer complete all as specified and directed by Engineer-in-Charge.

M&L PCC 1:3:6 type C0 using 12.5 mm graded stone aggregate as in hold fast blocks complete all as specified and directed by Engineer-in-Charge.

S&F factory made flush shutters 35 mm thick, solid core construction, with particle board core and plywood face panels, commercial type on both sides with both faces are covered with decorative face veneer with 6mm thick lipping frame to match including supply and fixing following items : (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 3 nos per leaf (b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 nos per leaf (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 nos per leaf (d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16x250mm - 1 nos per leaf (e) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 nos per leaf

S&F 35mm thick glazed and skelton shutters of 2nd class hard wood (factory made) open rebated and divided to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR-91 Pt-1 section 8 clause 8.20(a), kiln seasoned and chemically pressure treated including prepration of new wood surface ,applying two coats of synthetic enamel paint over a coat of pink primer all as specified including stainless steel 304 Grade wire cloth (wire dia. 0.22mm) and the supply and fixing following items:- (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 4 nos per leaf (b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 nos per leaf (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 nos per leaf (d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16x300mm - 1 nos per leaf (e) 200 mm long MS rat tail pattern spring hinge including roller and roller plate - 01 No per leaf

S&F 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate including fixing like welding etc complete all as specified and directed by Engineer-in-Charge.

S&F Steel factory made window box type using ERW hollow 'P' section comprising double frame for and including gauged and glazed Skelton shutter 30mm thick, jointed internally with flat iron 25x3mm complete including hinges, handle, tower bolts, stops, lugs, etc. all as shown on drawing No TD-191 (R) sheet 1/4 to 4/4 complete all as specified and directed by Engr-in-Charge.

S&F powder coated aluminium glazing/ doors & shutters made out of aluminium anodised section 101.60x44.75x1.75mm for chowkats or frame & shutters made of size 81.25x38.10x1.75mm for side rails, top rails and bottom rails and including 12mm thick High Density Fibre Board pre-laminated on both sides (water proof) above and below middle/lock rail, and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and including required nos. of pivots/hinges and brass mortice lock (four levers) and two Nos of keys complete all as specified and directed by Engr-in-Charge including supply and fixing the following items: (a) Powder Coated Aluminium Butt Hinges 100mm - 3 nos per leaf (b) Powder Coated Aluminium Tower Bolt 200mm long - 2 nos per leaf (c) Powder Coated Aluminium Handles 150 mm - 2 nos per leaf

S&F for 4mm thicck Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and directed by Engineer-in-Charge.

S & F for Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed by Engineer-in-Charge.

S & F aluminium ventilators with 80 micron powder coating of min section 45X45X1.63mm including 5mm thick frosted glass in lower 65% portion of shutters and stainless steel wire gauge 32 Gauge in upper 35% portion of shutter and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and complete all as specified and directed by Engineer-in-Charge.

Dismantling, floor, hearth or wall tiling including cement mortar (bedding (but not backing), removing serviceable tiles to store & rubbish off the premises complete all as specified and directed by Engineer-in-Charge.

M&L for anti-skid premium quality coloured tiles 400 X 400 mm and 7-8 mm thick, as in floors, steps, cills etc. in any pattern of light & dark tiles as approved, set and jointed in neat cement slurry and pointed in white or coloured cement to match, in floors etc. over & including 20 mm thick screed in cement mortar (1:6) over and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed by Engineer-in-Charge.

M&L for ceramic glossy finish, joint free premium quality coloured tiles 450 x 300 mm and 8-9 mm thick, in any pattern of light & dark/highlighters tiles etc as approved, on vertical surfaces such as in skirting/dado etc, set and jointed in cement slurry over & including 10 mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed by Engineer-in-Charge. Note : Dado should be flushed with the wall plastering.

M&L Non-skid coloured glazed ceramic tiles 7 to 8 mm thick (square or rectangular) are of each tile exc. 0.18 sqm but n. exc 0.36 sqm (unchamfered/ Jointless) in floor etc. set and jointed in neat cement slurry @ 3 Kg per SQM and pointed in white or coloured cement to match, including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge.

Providing machine cut Kota stone slab flooring 18-20 mm thick laid over 20mm thick cement mortar 1:3 screed bed laid and jointed with grey cement slurry mixed with pigments to match the shade of the slab including rubbing and polishing to mirror finish complete to be fixed in any position as described and specified.

S&F vitreous china premium/1st quality wash basin white/ivory/off white, flat back, size 500x400mm or 550x440 mm including pedestal, screws & plug and brackets etc. all accessories as recommended by manufacturer incl. waste pipe and coupling or connections incl all necessary accessories for fixing, packing, union complete in all respect as per manufacturer's instructions and taking down existing of any description/size all as specified.

S&F vitreous china premium/1st quality wash down water closet pan floor mounting (pedestal pattern/EWC) S/P trap white/ivory including connection to drain (or out going pipe) and with flush pipe 32mm dia and incl. plastic seat cover as recommended by manufacturer closed pattern with flat bottom etc; and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and including supply and fix of PVC long arm S/P trap so that joint is avoided inside the building as well as in wall and outlet straight away come out of wall in all floors except G.F.and taking down existing of any description/size complete in all respect all as specified.

S&F health faucet (ABS Body) with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. Make : Hindware (Cat No. - F160013) or equivalent from Parryware/Cera as approved by AO

S&F flushing cistern of PVC 10 ltr. cap. with dual flushing system, valveless syphonic action type, , low level, white/ivory/off white with inlet, ball valve, float and including brackets and connection to pipe etc. and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and taking down existing of any description/size complete in all respect all as specified.

S&F soap dish, stainless steel of suitable size to accommodate soap, tooth brush, glass, tooth paste complete in all respect all as specified.

Taking up or down existing steel tubing and connections, 15mm or 20 mm bore complete all as specified.

S&F 15mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor ctc complete all as specified.

S&F 20mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor ctc complete all as specified.

S&F overhead shower 70mm dia with 235mm long shower arm and incl all necessary accessories as recommended by manufacturer for fixing and taking down existing of any description/size complete in all respect all as specified by Engineer-in-Charge.

S&F 15 mm dia Bib Tap cast copper alloy fancy type CP with crutch or butterfly handle, screwed down screwed for iron pipe or for brass ferrule.

S&F Pillar taps, fency type, long neck, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with long screwed shanks and fly nuts, screwed for 15mm bore of iron pipe and fixed in repairs all as specified.

S & F 15 mm dia Stop cock cast copper alloy fancy type CP with long shank and cup (concealed type) , screw down high pressure, screwed both ends for iron pipe or for union and fixed complete all as specified and directed by Engineer-in-Charge.

S&F Stop valves, fancy type, CP with long shank and cup (concealed type ), exposed part kit with wall flange and regular body of concealed stop cock suitable for 15mm line with protection cap fixed in position in repairs, complete in all respect all as specified.

S&F stainless steel sink with drainage board, 1.00 mm thick, glossy finish, for kitchen with plugs washers and waste coupling of 32mm dia and including cantilever mild steel brackets, connecting union, etc, overall size 915mm x460/928mmx458mm with bowl size 410x 355x185mm/430x355x200 with wall connection pipe & wall flange and making good disturbed portion in CM 1:3 or PCC 1:2:4 complete all as specified and directed.

S&F Sink Cock with wall flange, fency type chromium plated cast copper alloy screwed down, high pressure, screwed one ends for 15mm bore of iron pipe or for union and fixed in position complete in all respect all as specified.

S&F towel rail CP 60 cm long bitween flanges and including all accessories like brackets and fixed in position all complete all as specified and directed.

S&F doubled layered rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top / cover) 500 Ltrs capacity hoisted and fixed in position all as specified including ball brass valves, high pressure, with polythene float and fly nut complete screwed for 20mm bore iron pipe and including GI nipple/union of 20mm bore to connect GI tubing to PVC tank including taking down existing complete all as specified and directed.

S&F 25mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed in repair complete all as specified.

S&F 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed in repair complete all as specified.

S&F PVC connections 15mm size with brass nuts of length 450mm complete all as specified and directed.

S&F stainless steel grating 150x150 mm size square shaped with cockroach trap for floor trap fixed in position complete all as specified .

Repair to RCC sunshades, Chajjas, Balconies, Columns, bands, beams and similar RCC work at any position/height by dismantling loose/disintegrated portion and dubbing out with Cement Concrete 1:1½:3, 15mm to 50mm thick using 6 to 12mm graded stone aggregate to make up and finished to required shape including provision of necessary supports if required and stitching of cracks with mild steel U clamps made out of 8mm dia @ 150mm c/c with inserting concrete block stretcher with cement mortar 1:3 mixed with adhesive chemical (Polymer based) and reinforced with PVC chicken mesh including form work where ever required and finished with10 mm thick plastering in CM 1:4 finished even and fair without using extra cement including preparation of surfaces to receive finishes complete all as specified and directed.

Mild steel framed work of Fe-410 as in grills/guard bars shouldered/weled with steel window / ventilators frames complete all as specified.

Demolition of cement concrete un -reinforced in ground floors and pavings n.exc 15cm thickness complete all as specified.

M & L Plain cement concrete 1:7:12 mix, type E-2 (using 40mm graded Brick aggregate) as in filling of sunken portion complete all as specified and directed.

Rendering 15 mm thick in cement mortar 1:3 , mixed with liquid water proofing compound, on brick or concrete surfaces of wall of sunken portion, trowelled to even and smooth finish without using extra cement with WPC paid and measered sepretly complete all as specified.

M & L APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application consisting of a coat of bitumen primer @ 0.40 Ltr/Sqm by the same membrane manufacturer of density 0.87 to 0.89 Kg/Ltr at 25 degree C temperature and viscosity 70 - 160 cps Over the coat, the layer membrane shall be laid using butane torch and sealling all joints etc after the surface complete all as specified and directed by Engineer-in-Charge.

M&L for Applying three coats of brush bond acrylic based cementitious material of approved quality for sunken portion treatment all as per manufacturer instruction and providing 200 micron thick polythene film over 85/25 grade bitumen layer @ 0.5 kg /Sqm complete all as specified and directed by Engineer-in-Charge.

S&F PVC(HDPE) SWR , 110 mm bore, single socketed in any length with rubber ring joints using solvent as per maunfacture instruction, fixed to walls complete all as specified including fixing of pipe to wall with flat iron clamps of size 25 x 3mm, bolts washing, nuts etc as in repairs after taking down existing damaged rain water pipe including fittings complete all as specified and directed by Engineer-in-Charge.

S & F PVC (SWR) bends/tees of 110mm bore with access door as in repair complete all as specified.

M & L Cast iron soil, waste and vent pipe, 100mm bore, sand cast in any length, with or without ears, with lead joints, fixed to walls/floors with and including stack clamps, nuts , bolts etc. and making necessary connections complete all as specified including taking down of existing unserviceable pipe.

S&F cast iron soil, waste and vent pipe,75 mm bore, sand cast in any length, with or without ears, with lead joints,fixed to walls/laid in floors and making necessary connections,fixed as in repair complete all as specified and directed.

S&F CI bends (any radius),for 100mm bore CI pipes diminishing pieces or tapers (large bore measured) fitted with oval access doors complete all as specified.

M&L for cast iron cowl of 100mm dia complete all as specified and directed by Engineer-in- charge

M&L Cast iron multifloor trap 110 mm dia and 600 mm long including jointing with solvent cement in repair complete all as specified and directed by Engineer-in-Charge.

S&F single Y-shaped CI junction pieces,ordinary or inverted(spigot or socket type) for 100mm bore pipes complete all as specified.

S&F cast iron juction combination 'T' equal or unequal for 100mm bore with access door as in repair complete all as specified and directed by Engineer-in- charge

S&F Salt glazed stone-ware gully traps,Centrifugal type 150 x 150mm size , square or roundmouthed, in repair complete all as directed and specified by Engineer-in- charge

Providing 25 mm dia GI pipe medium grade spouts 60 cm long complete all as specified and directed.

Dismantling of brick tiles or terracing tiles single layers on roofs complete all as specified.

Dismentling mud phuska on roof and removing debris away from site.

Scrapping surfaces of roof by wire brushing removing all loose dirt and cleaning and washing down the surfaces with water complete all as directed.

Cutting grooves in brick wall 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 all as specified and directed.

PCC 1:3:6, type C-0 using 12.5mm graded stone aggregates as in padding over roof, minimum thickness at khurra as 45 mm to maintain a slope of 1:100 ,complete all as specified and directed.

M&L for two coats of synthetic aluminium paint on APP sheet all as specfied and directed by engineer in charge .

PCC 1:2:4 type B1 (using 12.5mm graded stone aggregate) as in roof kerbs, mud stops,steps small sumps and like items slightly rounded or chamfered on the edges all as directed by engineer in charge .

S & F for Cast iron bends/Tee duck foot or heel rest, for 100 mm bore pipe, complete all as specified and directed.

S&F CI nahani trap incl jointing to waste pipe in neat cement 100mm dia fixed in cement concrete (1:2:4) type B1 complete all as specified and directed by Engineer-in- charge

PCC 1:2:4 type B1 using 12.5 mm graded stone aggregate 40mm thick as in flooring finishing cement concrete surface even and smooth complete all as specified and directed by Engineer-in-Charge.

M&L for glass dividing strips 3 mm thick 38 mm wide inserted in position confirm to design complete all as specified

M&L Machine pressed rubber moulded ISI marked precast cement concrete interlocking paver block any shape and size and of colour 50% red coloured tiles and 50% grey coloured tiles confirming to IS-15658-2006 of 60mm thickness M-35 Grade and including filling of interstices with fine sand over including 25mm thick layer of sand chusion complete all as specified and directed by Engineer-in-Charge.

M & L for preparation of new steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-Charge.

Demolition of reinforced cement concrete of any description as in water storage tank of any size /capacity /description /position located on terrace of the building including moving the demolished material to low laying area outside MOD land complete all as specified and directed.

M & L for Preparation of new wood surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified

Demolition of Brick work or stone/boulder masonary built in CM including all quoins, arches, pillers etc complete all as specified and directed.

M&L for Brick Work with sub class 'B' bricks straight or curved on plan exceeding 6m mean radius built in CM 1:6 complete all as specified and directed.

M&L Cement concrete (1:3:6) type C-1 using 20 mm graded stone aggregate as in plinth protection, 50 mm thick, surfaces finished even and smooth without using extra cement as in plinth protection including provision of construction joints complete all as specified and directed by Engineer-in-Charge.

M&L PCC 1:3:6 type C-2 using 40mm graded stone aggretgate, as in base for PVC tanks, as in base of floors and other similar works complete all as specified and directed.

M&L 100mm thick cement concrete Type D2 1:4:8 (40 mm graded aggregate) as in flooring /paving as subbase complete all as specified and directed.

Demolition of RCC of any type and in any position complete all as specified and directed.

M&L for precast RCC (1:2:4) type B-1 using 20mm graded mechanically crushed stone aggregate as in precast slabs for covers of manholes and set in CM 1:6 incl necessary form work and placing of manhole cover complete all as specified and directed.

S&F 18 mm thick (with min density 600 Kg/cu.m) LEAD FREE PVC Celuka ply with prelaminated on both sides with wooden shade on one side and white shade lamination on other side as in cup-board front shutters , fixed with screws, solvent cement/ adhesive to make kitchen/bed rooms cabinet sides top and bottom and shelves inside the cabinets complete fixed in position in all respect all as specified including taking down existing damaged shutter and including supply and fixing of following items :- (a) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 1 nos per leaf (b) Stainless Steel (304 Grade) Finished Handles 200 mm - 1 nos per leaf (c) Stainless Steel (304 Grade) Finished magnetic Catchers - 2 nos per leaf (d) Stainless Steel (304 Grade) Finished Hapse and staple - 1 nos (e) Continuous ( Piano Hinges30 mm l )304 Grade) Stainless Steel (304 Grade) - 1 Nos per leaf

S&F Pre-laminated PVC solid board as in frames for cupboard shutters 40 mm thick (double sandwiched of 20mm) prelaminated on one side with wooden shade incl hasp and staple for locking arrangement and magnetic catcher 2 Nos in each cupboard complete fixed in position complete in all respect including taking down existing damaged CB frame complete all as specified and directed by Engineer-in-Charge.

S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification complete all as specified and directed by Engineer-in-Charge.

S & F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. M S frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side and as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joining together with solvent cement, supplying & fixing in the frame at site as per specification & drawing along with necessary aluminium mongaries for fixing of door, complete all as specified and directed by Engineer-in-Charge. (a) Stainless Steel (304 Grade) Butt Hinges 150mm - 3 nos per leaf (b) Aluminium Tower Bolt 150mm long - 2 nos per leaf (c) Aluminium Handles 150 mm - 2 nos per leaf

S&F 20-22 mm dia stainless Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc for curtain rod incl all fixing complete all as specified and directed by Engineer-in-Charge.

S&F stainless steel 304 grade wire Basket of pull out type for kitchens of required size incl all fixing complete all as specified and directed by Engineer-in-Charge.

S&F Stainless steel 304 grade wire Basket Cutlery/plate of size 370X485 mm for kitchens of required size incl all fixing complete all as specified and directed by Engineer-in-Charge.

S&F tube/Rod for CB(wardrobe) of size 18 mm dia Stainless steel 304 grade incl fixing with other end brackets as required complete all as specified and directed by Engineer-in-Charge.

M&L two component elastomeric acrylic polymer modified cementitous waterproofing coating smartcare Damp block 2k or approved equivalent, having 100 % elongation as per ASTM D412 resisting 5 bars hydrostatic pressure as per DIN 1048, reduction to rapid chloride shall br 70 as per DIN 1048 crack bridging upto 1.2 mm as per ASTM 4548.5. The coating shall have food grade certificate from laboratories like CFTRI. The mixing ratio of the coating shall be 2 parts of powder & 1 part of liquid without any water addition in the mixing etc. complete as per manufacturer instructions complete all as specified and directed by Engineer-in-Charge..

Taking down carefully existing point wiring on surface conduit/concealed conduit including conduit from surface for light/fan/socket/power/bell from wall & roof along with fitting and fixtures such as switches, sockets, ceiling roses, batten holders, unserviceable light fittings, pieces of wires, gutties, conduit, wooden boards etc removing materials to store for keeping in safe custody of contractor for which the credit has been considered under schedule of credit and making good the disturbed portion of all floor, ceiling etc all as specified and directed.

M & L for Point wiring with 1.5 sqmm PVC insulated and unsheathed FRLSH single core multistranded copper conductor for one light/fan/bell point in and including NEW PVC rigid non metallic concealed conduit 19/20 mm dia, medium duty, ISI Marked to be terminated in pressed steel terminal boxes with PVC modular top cover plates of suitable size for mounting of modular type switches/sockets/regulators including 1.5 sqmm PVC insulated and unsheathed FRLSH single core multistranded copper earth continuity conductor controlled by one switch and/or one regulator complete including cutting chases and making good the surfaces in CM 1:3 and finishing the surface as per existing treatment all as specified and directed by Engr-in-charge. Notes: (i) Cost of Pressed steel Terminal Boxes and modular Top cover plate shall be included in point wiring. (ii) Wiring shall be done as per colour code in IS for phase, neutral and earth.(iii) -Cost of Eye/bottle thimbles used for connection in switches/sockets & MCBs in DBs shall deemed to be included in the unit rate quoted for this item.

M & L for point wiring with 1.5 sqmm PVC insulated and unsheathed FRLSH single core multi-stranded copper conductor for one light point controlled by 2 way and including PVC rigid non metallic concealed conduit medium grade 19/20 mm dia to be terminated in pressed steel terminal boxes with top cover plate including 1.5 sqmm PVC insulated and unsheathed FRLSH single core multi-stranded copper earth continuity conductor controlled by one switch and/or one regulator complete including repairing the surfaces in CM 1:3 and finishing the surface as per existing treatment all as specified and directed. Notes: (i) Cost of Pressed steel Terminal Boxes and modular Top cover plate shall be included in point wiring. (ii) Wiring shall be done as per colour code in IS for phase, neutral and earth. (iii) -Cost of Eye/bottle thimbles used for connection in switches/sockets & MCBs in DBs shall deemed to be included in the unit rate quoted for this item.

All as per Sl item No 102.00 above herein before but one socket out let 5 pins 5 Amp on the same board with other switches complete all as specified and directed.

All as per Sl item No 102.00 above herein before but for one socket out let 5 pins 5 Amp on independent board complete all as specified and directed.

All as per item No. 102.00 herein before but 2.5 Sqmm PVC insulated and unsheathed FRLSH single core multistranded copper conductor incl 2.5 Sqmm PVC insulated and unsheathed FRLSH copper earth wire for switch socket combination 3 pin 15 amps on independent board.

S & F in replacement of Modular switch 1 way, 6 Amps, 1 module, 230 volts complete all as specified.

S & F in replacement of Modular switch 2 way, 6 Amps, 1 module, 230 volts complete all as specified.

S & F in replacement of Modular switch 1 way, 16 Amps, 1 module, 230 volts complete all as specified.

S & F in replacement of Modular bell push switch 1 way, 6 Amps, 1 module complete all as specified.

S & F in replacement of Supply & fix in replacement of Call bell ding dong AC 230 volt single pole complete all as specified.

S & F in replacement of Modular socket 5 pin 6 Amps, 2 module 230 volts complete all as specified.

S & F in replacement of Modular socket 5 pin 6 &16 Amps, combination type 2 module complete all as specified.

S & F in replacement of Modular Fan regulator step type, 120 watts, 2 module complete fixed as in repair all as specified.

S & F in replacement of ceiling rose surface bakelite surface 65 x 50mm 3 terminals all as specified & directed

S & F Lamp holder including LED bulb 9 W including flexible wire 0.5 Sqmm copper cable all as specified & directed by Engr-in-charge.

S & F in replacement of New generation energy saving and environmental friendly long life LED building security light 1x35 watts made up of pressure die cast alluminium housing with high power LED as light source and lense embedded PC cover having TOP OPENING separate driver compartment with IP65 protection and impact resistance of IK07, with all accessories including suitable bracket made of 32mm bore light grade GI pipe bemd to shape, including MS clamp of size 40x3mm flat iron of required size and PVC cable 1.5 Sqmm twincore from ceiling rose to light fittings complete all as specified and directed by Engineer-in-charge.

S & F in replacement of Surface Mounted LED Bulk Head Luminaire of capacity 10 watt with ABS Body & Polycarbonate Diffuser, IP54 inc connection with ,with flexible wire 0.5 sqmm copper cable all as specified & directed by Engr-in-charge.

M & L for Sub main wiring with two single core 6.0 Sqmm PVC insulated and unsheathed FRLSH ,stranded copper conductor cable drawn through PVC concealed conduit 25 mm dia including 6.0 Sqmm PVC insulated unsheathed FRLSH stranded copper conductor cable as earth wire all as specified and directed by Engineer-in-charge. Note 1:- 2(two) Runs of 6.00 Sqmm Copper conductor cable, 1 Run of PVC conduit & 1 Run of 6.00 Sqmm Copper conductor Earth wire shall be measured as one unit) Note 2 :(i) Rate quoted for this items shall be inclusive of the cost of (i) Rigid non-metallic PVC conduit of 25 mm dia with tees, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. (ii) Cutting chases, pinning in making good to facing where required and pointing in cement mortar 1:3 to match the existing surfaces and cutting not exc. 10 cm girth . (iii) Including taking out/down existing unserviceable sub main wiring.

S & F MCCB, 4 Pole, 100 A, 16 KA for fixing in DB including proper thimble connection, thermal and magnetic release protection complete all as specified and directed by Engineer-in-charge.

Supply and fix in replacement of epoxy power coated MCCB distribution box double door VTPN 4 way vertical type AC 415 V with IP 43 protection for MCBs alongwith provision of MCCB as incomer with commen bus-bar at incoming end of outgoing MCBs grouted/ flush to wall, complete all as specified by Engineer-in-charge. (Note :- MCCB will be measured and paid under seperate item) (i) Cost of Eye/bottle thimbles used for connection MCBs in DBs shall deemed to be included in unit rate quoted for this items, (ii) Electric wiring should be done in proper colour coding i.e. Red for phase, Black for neutral and Green for Earth. (iii) connection of theMCCBs/ MCBs with cable shall be made through appropriate size pin /bottle type thimble -properly crimped. all the vacant holes of the DB shall be provided with blank plates of appropriate size complete all as specified and directed by Engr-in-charge.

Supply and fix in replacement of Sheet metal enclosure 8 ways double door for DBs when MCBs are to be used 240,volts including 200 Amps standard bus bar of suitable size and common neutral link all flush mounting type, drilling holes for incoming and out going cables with IP43 protection complete all as specified & directed by Engr-in-charge.

S & F in replacement of MCB , SPN, 240 Volts ,32-40 amp for fixing in DBs of including proper thimble connections complete all as specified and directed by Engineer-in-Charge.

S & F in replacement of MCB, single pole 240 volts 6 to 32 Amp capacity for fixing in DB’s including proper thimble connections complete all as specified and directed by Engineer-in-Charge.

M & L in replacement of UNSV Earthing complete with galvanized iron earth plate electrode of size 600x600x6.0mm , buried directly in ground (earth pit not less than 2.25 mtrs below normal ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanized earth lead wire 4.0 mm dia by means of bolts , nuts , check nuts and galvanized iron or steel including earth work in any type of soil, charcoal salt 15 cm around the earth plate 20 mm dia watering pipe medium grade 1.70 mtr long with a plug at top, GI protection pipe light grade 15 mm dia from earth pit to main board including PCC pit in cement concrete 1:2:4 along with CI frame and cover 10mm thick duly hinged to CI frame as shown in the electrical plate No3 of SSR 2009 part 1 all as specified & directed by Engr-in-charge.

S & F in replacement Tube light fitting Self Ballasted LED Batten. Extruded Thermoplastic body with PC Diffuser in square LED Batten 18/20W 6500K of capacity ,20 watt,4 ft long incl 3 core flexible wire 0.5 sqmm copper cable all as specified and directed by Engr-in-charge.

Supply and fix in replacement of elegantly designed sleek surface mounted pressure die-cast aluminium LED luminaire in powder coated white finish in round profile with optimized heat sink for efficient heat dissipation and independent electronic LED driver of capacity 12 W LED of 5000 K and making good the existing surface as per existing complete all as specified & directed.

S & F XLPE Insulated ,screened, PVC bedded, galvanized steel wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 4 core supplied & laid in replacement complete all as specified& directed by Engineer-in-Charge.

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth for laying of cables including getting out in any kind of soil complete all as specified and directed.

Returning filling in including spreading, levelling, and well ramming, in layers not exceeding 25 cm each layer of any kind of soil.

Removing surplus excavated material from site not exceeding 50 mtrs from starting point and depositing where directed at level not exceeding 1.5 mtr above the starting point.

Material and labour for sand cushioning for cables 8 cm below the cable and 15 cm above with dry river sand in trenches for cushioning of underground cable line including spreading, leveling, well ramming completed all as specified and directed.

Cutting of hardstanding floor/wall for laying of cable including matching with suface by using cement concrete all as specified and directed.

Supplying & laying factory made unreinforced Precast concrete cable covers class LV type 1, flat, Size 250x150x40mm laid in trenches as protection to cables complete all as directed by Engr-in-Charge

Material and labour for replacement of GI tubing light grade 40 mm bore for passing through cables under the floor ,along the wall or along the pole complete all as specified and directed.

Taking down and refixing of ceiling fan after repair and replacement of rubber reel, round cover plate of size 6 inch of ceiling fan complete with ms split clamp two Nos, nuts and bolts complete all as specified and directed by Engr-in-charge.

M&L spray Painting to existing Enclosures for DB and Electric meter of any type description complete with two coat of weather proof synthetic enamel spray paint over a coat of red oxide primer complete all as directed by Engr-in-Charge.

Supply and fix in repair Exhaust fan AC single phase 230/240 v of size 250 mm sweep ,900 rpm Engineered thermoplastic body, high efficiency motor, dynamically balanced blade for better performance and corrosion-resistant powder coated metallic finish including Louver complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in repair louvers made out of 0.63mm galvanised iron sheet for exhaust fan of any make and size 300mm all as directed by Engineer-in-Charge.

Material and labour for making hole of suitable size for PVC exhaust fan 250 mm sweep in wall and grouting and making good the surface as per existing complete all as specified and directed by Engr-in-charge.

rkkataria and sons (BID ID -3087727)

SWAMI ENGINEERS (BID ID -3081222)

ANIL KUMAR AND CO (BID ID -3086006)

FAVOURITE ENGINEERS (BID ID -3083169)

m/s panchmukhi builders (BID ID -3081660)

M/s Rakesh Singla (BID ID -3087080)

Arneja Builders (BID ID -3086321)

M/S Mukesh Kumar Gupta (BID ID -3086939)