Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹41.2 LAccepted-AOC | L1 | Accepted-AOC Lowest tender accepted | |
| 2 | L2₹49.5 L+₹7.8 L (18.6%)Rejected-Finance | L2 | Rejected-Finance Other than lowest tenderer |
Tender Value
₹41 L
EMD Value
₹82,000
Closing Date
4 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Adm Area Agra 282008
GE (AF) Adm Area Agra 282008
IMPROVEMENT OF DSC MESS COOK HOUSE AND DINING HALL UNDER AGE BR II OF GE AF ADM AREA AT AF STATION AGRA
2022_MES_529507_1
8000-1965/E8
Open Tender
Civil Works - Others
Item Rate
180 days
AF Station Agra
Class D
cat a i
8 documents required · 8 mandatory
₹500
GE AF Adm Area Kheria Agra
₹82,000
Yes
2 Aug 2022
8 Jun 2022
6 Jul 2022
8 Jun 2022
4 Jul 2022
22 Jun 2022
8 Jun 2022 - 21 Jun 2022
60 days
Amount
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing tiles and rubbish off the premises complete all as specified and directed.
M&L for glazed ceramic coloured tiles of size 300 x 200 x 6-7 mm thick in vertical surface set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing surface with & including rendering 10 mm thick in cement mortar 1:4 on other than fair faces of brick wall finished rough to fix tiles complete all as specified and directed.
M&L for glazed ceramic coloured tiles of size 450 x 300 x 7 mm thick in vertical surface set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing surface with & including rendering 10 mm thick in cement mortar 1:4 on other than fair faces of brick wall finished rough to fix tiles complete all as specified and directed.
M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square or rectangular) area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm as in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with & including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and directed.
M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square or rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with & including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and directed.
M&L for non skid ceramic coloured tiles 7 to 8 mm thick joint less (square or rectangular) on vertical surface such as skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match surface of tiles over and including 10 mm thick rendering in cement mortar 1:4 and complete all as specified and directed.
M&L for light shade vitrified glazed ceramic tiles 10 mm thick(square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with & including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and directed.
M&L for light shade vitrified glazed ceramic tiles 10 mm thick polished on vertical surface such as skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match surface of tiles over and including 10 mm thick rendering in cement mortar 1:4 and complete all as specified and directed.
Dismantling of stone slabs and tiles of any description and thickness as in floor, walls, apron etc. laid, bedded and pointed in any mortar complete all as specified and directed.
M&L for granite stone 18-20 mm thick (of any type) glazed (table rubbed and polished) fixed as in skirting, steps, jambs, pillars, window cills, cooking plateform/WHB plateform including cutting oval shape hole for fixing WHB and the like set in cement mortar 1:4 and pointed with white cement (1:2) using marble dust with admixture of pigment to match with and including screed bed or bedding layer of mortar 20 mm thick in cement mortar 1:4 complete all as specified and directed.
M&L for providing edge moulding to granite stone of any description of counters vanities etc. including machine polishing to edge to give high gloss finish complete all as specified and directed.
Demolition of cement concrete unreinforced in ground floors and pavings n.exc. 15 cm thickness(below or above ground level) complete all as specified and directed.
M&L for plain cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation, filling & mass concrete complete all as specified and directed.
M&L for 40 mm thick cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in flooring finished even and smooth using extra cement complete all as specified and directed.
Supply only glass dividing strip 3 mm thick, 38 mm wide inserted in floor to required design complete all as directed. NOTE:- Rates for fixing shall deem to be included in rates for laying flooring.
M&L for 75mm thick cement concrete type C2 1:3:6 (using 40 mm stone graded crushed stone aggregate) as in plinth protection surface finished even and fair including forming construction (dummy) joints 6 mm wide & 10 mm deep and filled with filler at an interval not exceeding 3 metre and at change of direction complete all as specified and directed.
M&L for 25 mm thick Cement concrete 1:2:4, type B1 using 20mm graded stone aggregate as in sub base of floor etc. complete all as specified and directed.
M&L for machine cut kota stone slab of size not less than 550 x 550 mm (except where lesser size required) as in flooring or in trades of steps 20 to 22 mm thick and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing, rounding of edges and mirror finish polishing with & including screed bed or bedding layer of mortar 20 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and directed
M&L for machine cut kota stone 18 to 20 mm thick as in steps, risers, skirting, dado etc., bedded and jointed with grey cement slurry and pointed in white cement with admixture of pigment to match the shade of the stone including grinding, rubbing and polishing with & including rendering 15 mm thick in cement mortar 1:4 finished rough to fix stone complete all as specified and directed.
M&L for mirror finish polishing and grinding with the finest grade git blocks on existing kota stone surfaces in floors, stair case, skirting etc. to give high gloss finish complete all as specified and directed.
M&L for brick work with fly ash bricks, old size, class designation 75, straight or curved on plan exceeding 6 mtr mean radius and built in cement mortar 1:6 including demolition of brick work built in cement mortar including all quoins, arches, pillars etc. complete all as specified and directed.
M&L for brick work with fly ash bricks, old size, class designation 75, straight or curved on plan not exceeding 6 mtr mean radius with bricks roughly cut to required radius and built in cement mortar 1:6 complete all as specified and directed.
Taking down cement plaster on walls/ceiling of any description including racking out joints hacking for key, scrubbing down with water etc. and removing rubbish complete all as specified and directed.
M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 using WPC @ 2 % by weight of cement finished even and smooth without using extra cement complete all as specified and directed. (Rate of Water proofing compound shall deemed to be included under this item).
M&L for rendering 15 mm thick on other than fair faces of brick work or concrete surface in cement mortar 1:6 finished even & smooth without using extra cement complete all as specified and directed.
M&L for Dubbing out average 10 mm thick in CM 1:3 on irregular ceiling surface incl fixing with GI wire netting 0.90 mm dia and 12 mm mesh lathing incl all laps, cutting and waste to the existing reinforcement of the ceiling complete all as specified and directed.
M&L for rendering 5 mm thick on concrete surfaces of ceiling with CM (1:3) and finished even and smooth without using extra cement complete all as specified and directed.
M&L for applying two coats of distemper oil emulsion over a coat of clearcholle primer on new surfaces of walls including preparation of surface complete all as specified and directed.
M&L for complete removal of existing treatment on walls and applying two coat of distemper oil emulsion complete all as specified and directed.
M&L for preparation of new plastered surfaces of brick/concrete and applying two coats of weather proof exterior emulsion paint matt finish over one coat of water base primer complete all as specified and directed.
M&L for complete removal of existing treatment on walls including scraping where ever required and applying two coats of weather proof exterior emulsion paint matt finish paint on brick/concrete wall surfaces over one coat of water base primer complete all as specified and directed.
M&L for applying wall care putty 1 mm thick on old or new surface brick/ concrete for smooth finish complete all as specified and directed.
M&L for applying three coats of white wash on ceiling including preparation of new surface complete all as specified and directed.
M&L for preparation of old plastered or unplastered surface of ceiling and applying two coat of white wash complete all as specified and directed.
M&L for preparation of new or previously untreated surfaces of wood or wood based materials of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L preparation of old painted surface of wood and wood based material of any description area exc 10cm width or girth and applying two coat of synthetic enamel paint complete all as specified and directed.
M&L for preparation of new or previously untreated surfaces of steel or iron of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M&L preparing old painted surface of steel/iron of any description area exceeding 10cm width or girth and applying two coat of synthetic enamel paint complete all as specified and directed.
Taking down Chowkats or frames with shutter (without taking off shutters from the frame) n. exc. 1.50 sqm each complete all as specified and directed.
Taking down Chowkats or frames with shutter (without taking off shutters from the frame) exc. 1.50 sqm and n. exc. 4.00 sqm each complete all as specified and directed.
Taking down shutters of any description exc 1 sqm & n. exc 2 sqm each complete all as specified and directed
S&F factory made solid PVC door frame of size 50mmx 47mm made out of 5 mm wood grain printed PVC sheet reinforced with MS square tube and fixed with screws and rawl plugs complete all as specified and directed.
S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded wood grain PVC 'C' channel having wood grain PVC sheet and feathered edges for stiles and Wood grain PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of wood grain PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with feathered edges and jointed together with solvent cement complete all as specified and directed.
S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
M&L for 2nd class hard wood glazed and skeleton shutters 35 mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (a); supplied and fitted to chowkhats complete all as specified and directed.
S&F Structural steel framed work with rolled mild steel sections as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing conforming to Fe-290 (Gde E-165) complete all as specified and directed.
S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc., aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, complete all as specified and directed.
M&L for Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc., aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge. (Note:- Builder hardware, Glass pane, wire netting requiered shall be measured and paid seperately under respective items)
S&F aluminium anodised barrel tower bolt of extruded section 150 mm long ISI marked and fixed complete all as specified and directed.
S&F aluminium anodised barrel tower bolt of extruded section 100 mm long ISI marked and fixed complete all as specified and directed.
S&F aluminum alloy anodized sliding door bolt 150 mm long with hasp and staple (bolt type) and fixing clip of sheet and cast in extruded section and fixing bolts and sliding bolt of extruded section complete all as directed and directed.
S&F figured glass, 5 mm thick, pin head type and glazing with rubber beading in squares exc. 0.50 Sqm in each pane fixed to aluminuium frame complete all as specified and directed.
S&F alumunium handle, cast type, anodised 125 mm long ISI marked complete all as specified and directed.
S&F alumunium handle, cast type, anodised 100 mm long ISI marked complete all as specified and directed.
S&F 100 mm size stainless steel, butt hinges, with SS hinge pin, bright polished and fixed with screws complete all as specified and directed.
S&F in repairs double action floor spring hydrualically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover plate, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed.
S&F 18/19 mm thick prelaminated particle board, exterior grade, prelaminated both sides with decorative choice lamination fixed to aluminium frame or fixed to with screws to timber frame work complete all as specified and directed.
S&F Box type steel windows/ventilators with side hung shutters with glazed and gauzed double panel shutters both provisions including box type hinges or factory made butt hinges with steel handle, tower bolts, hold fasts and steel peg stays etc. complete without glazing bars dovetailed or welded and 10mm square guard bars @ 125mm c/c both way complete as per drg No. CE/ALD/TD-172 sheet No 1/2 to 2/2 complete all as specified and directed. Note: PCC for fixing holdfast, wire cloth and glass shall be measured and paid separately.
M&L plain cement concrete 1:3:6 type C-1 using 20mm graded stone aggregate as in copings, hold fast and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork complete all as specified and directed.
S&F 4 mm thick sheet glass, ordinary quality and glazing with oil putty or wooden beads in square, area n.exc 0.5 Sqm in each pane complete all as specified and directed.
S&F 4 mm thick sheet glass ordinary quality and fixing with wooden beads or oil putty and provsion of glazing pins in squares not exceeding 0.50 Sqm in each pane including hacking out old broken glass of any description and thickness from wooden/steel frames fixed with wooden beads/putty and complete all as specified and directed.
S&F 0.36 mm dia stainless steel wire cloth with average width of aperature 1.40 mm and fixed with stainless steel wire staples or moulded beading complete all as specified and directed.
S&F in repair 0.36 mm dia stainless steel wire cloth with average width of aperature 1.40 mm and fixed with stainless steel wire staples or moulded beading complete all as specified and directed.
M&L mild steel work as in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintel hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290, Gde E-165 complete all as specified and directed.
M&L mild steel framed work such as grills, gratings etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.
S&F 20 mm dia stainless steel CP curtain rod, having wall thickness not less than 1.20 mm with side brackets of SS CP grade 304 and SS CP end knobs and fixed to wall with wooden plug/ PVC gully with CP screws and cup washers complete all as specified and directed.
Dismantling wrought or mild steel work of any description not otherwise provided for complete all as specified and directed.
S&F rolled mild steel in roof trusses, (framed), trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections ) including distance pieces, cleats etc. conforming to Fe-410-W(Gde.290E) quality-B complete all as specified and directed.
Dismantling asbestos cement (corrugated, semi corrugated etc) sheets in roof coverings complete all as specified and directed.
S&F pre-painted galvalume aluminium zinc coated galvanised Iron based corrugated steel sheeting 0.5 mm thick, with side lap and end lap of any colour having tensile strength 550 MPA ridges, hips, valley gutters, drip and straight flashing or in roof covering fixed with self taping screws (length & girth as fixed) complete all as specified and directed.
S&F pre-painted galvalume aluminium zinc coated galvanised Iron based plain steel sheeting 0.5 mm thick, with side lap and end lap of any colour having tensile strength 550 MPA ridges, hips, valley gutters, drip and straight flashing or in roof covering fixed with self taping screws (length & girth as fixed)complete all as specified and directed.
M&L Cement Concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps, seismic and other bands, plinth courses, string cources, lacing cources, parapets and railing upto 60cm in hight, copings, kneelers, roof kerbs, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork complete all as specified and directed.
Supply, fixing, laying & testing 15 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors and testing including taking down existing GI tubing complete all as specified and directed.
Supply, fixing, laying & testing 20 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors and testing including taking down existing GI tubing complete all as specified and directed.
Taking down and refixing of 15 mm bore GI Steel tubings including new or old fittings complete all as specified and directed.
Taking down and refixing of 20 mm bore GI Steel tubings including new or old fittings complete all as specified and directed.
S&F sink with draining board made of stainless steel 1mm thick with plugs, washers, waste pipe and coupling overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm fixing with CM bedding on MS brackets as required complete all as specified and directed.
S&F stop valves 15 mm nominal bore, cast copper alloy, fancy type, chromium plated with long shank and cup (concealed type), screwed down, high pressure with crutch or butterfllly handles, screwed both ends for iron pipe or for brass ferrule or to GI socket complete all as specified and directed .
S&F in repair stop valve/angle valve 15 mm nominal bore cast copper alloy, fancy type, chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for unions and fixed complete all as specified and directed.
S&F in repair long body bib taps, cast copper alloy, fancy type, chromium plated with crutch or butterfly handles, screwed down, screwed for 15 mm bore GI pipe or for brass ferrule or to GI socket complete all as specified and directed.
S&F in repair vitreous china under counter type Wash basin, white, oval shape of size 575x430mm including 15 mm dia fancy type cast copper alloy CP swan neck pillar tap, 32mm dia PTMT waste coupling and 32 mm dia waste pipe 700 mm long and PVC connection 600 mm long with two PTMT nuts etc. fixed in granite slab and RCC slab complete all as specified and directed. Note :- Granite slab and RCC shall be measured and paid seperately under respective item.
S&F in repair vitreous china wash hand basin white flat back size 550x400 mm including two Nos angle iron brackets including one number 15 mm bore pillar taps, cast copper alloy, fancy type, chromium plated, 32mm dia PTMT waste coupling, waste pipe and 600 mm long PVC connection with 02 Nos PTMT nuts and rubber washer complete all as specified and directed.
S&F in repair Viterous China wash down water closet pan (pedestal pattern) with 'P' or 'S' trap, white (excluding fixing bolts, flushing cistern and flush pipe) and including Plastic water closet seat cover white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.
S&F in repair vitreous china squatting pan Orissa pattern size 580 x 440 mm white with front or back inlet, integral foot rest including connection to trap and flushing pipe, anti syphonage and providing cement concrete bedding complete all as specified and directed.
S&F in repair Vitreous China urinals, half stall type, white (excluding flushing cistern), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing flush pipe, grating and Union for discharge pipe including waste pipe complete all as specified and directed.
S&F in repair 10 Ltrs capacity, PVC valveless, syphonic action type, low level flushing cistern, white, with inlet, ball valve, float and handle complete with all internal accessories and fixed to wall, PVC flush pipe 32mm dia 90cm long fixed properly to inlet of WC and making good to disturbed surfaces of wall or floor complete all as specified and directed.
S&F in repair PVC connection 600 mm long suitable for 15 mm GI pipe with two PTMT nuts & rubber washers complete all as specified and directed.
S&F in repair chromium plated brass shower rose 125mm dia with or without swival joints, with CP long shank including fixing to 15 mm dia pipe or union all as specified.
S&F in repair 20 mm dia brass chromium plated tubular towel rail, D type, 60 cm long between flanges fixed with rawl plug complete all as specified and directed.
S&F in repair stainless steel grating doom with or without hole 100mm dia complete all as specified and as directed.
S&F central hole basin/sink mixer, fancy type, brass chromium plated, with round spout with popup waste system, including plugging and fixed, suitable for 15mm bore pipe complete all as specified and directed.
S&F 15 mm dia chromium plated brass wall mixture for mixing hot and cold water sutable for 15 mm bore GI pipe complete all as specified and directed.
S&F soap dish, brass chromium plated, oval shaped of size 100x50mm (approx), fixed to wall with PVC gully and CP screws complete all as specified and directed.
S&F in repair tripple layer rotational moulded polyethylene water storage tanks 500 lts capacity (cylinderical vertical with closed top) hoisted and fixed in position with and including ball valve 20 mm bore high presure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight not less than 210 grams) complete all as specified and directed.
S&F in repair tripple layer rotational moulded polyethylene water storage tanks 1000 lts capacity (cylinderical vertical with closed top) hoisted and fixed in position with and including ball valve 20 mm bore high presure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight not less than 210 grams) complete all as specified and directed.
S&F steel tank cover with zinc coating, dia of cover 500 mm and height 150 mm of cut spherical shape and gas welding if spikes 2 mm dia and 50 mm length at 50 mm c/c both bay in zig zag motion with MS hinges 50 mm long medium weight, hasp and staple 100 mm long fixed to PVC water storage tank of any capacity complete all as specified and directed.
S&F in repair 20 mm bore gun metal gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.
S&F sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed .
S&F 1 mm thick stainless steel plate rack over all size 900 x 600 x 250 mm of standard pattern and make as approved by GE complete all as directed.
S&F Health faucet (ABS body) mild steel chromium plated suitable for 15 mm dia pipe superior quality with 1.25 m long flexible pipe and ABS wall hook including making connections and fixed in position complete all as specified and directed.
S&F suspended false ceiling with "E" grid suspended ceiling grid system of grid size 600 x 600mm with GI frame work of main runner 38 x 24mm sheet thickness 0.4mm, cross tee 28 x 24mm sheet thickness 0.3mm and wall angle 24 x 24 x 0.3mm including 4mm thick non asbestos fibre cement bldg disigner board conforming IS-14862 type B cat 3 of oceanic texture and ivory colour of size 595mm x 595mm to be placed in the grid suspended by 4 mm dia GI wire at distance n. exc 1.2m center to center with butterfly clips complete all as specified and directed.
Excavation in trenches in soft/loose soil, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out complete all as specified and as directed.
All as per Item No.103 above but depth exc 1.50 m and not exc 3.0m deep.
Returning filling in including spreading watering and well raming in layer excedding 25 cm each in soil complete all as specified and directed.
Removing excavated soil to a distance not excedding 50m and deposited where directed at a level not excedding 1.5m above the starting point complete all as specified and directed.
M&L for cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in concrete foundation bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm dia pipe complete all as specified and directed.
M&L for 150 mm bore salt glazed stoneware drain pipes, complete with collars, laid in trenches and jointed in cement mortar 1:1 as in drains complete all as specified and directed.
M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
M&L for precast cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves etc and similar works set in cement mortar 1:4 complete all as specified and directed.
M&L Cutting into existing man holes for connection new drains of dia of pipe 150 mm internal dia making good to pipe and rendering cutting out existing benching for and forming branch channels (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate finished smooth and reforming benching complete all as specified and directed at site.
Excavation over areas, n.exc 1.5 m deep and getting out in soft/ loose soil complete all as specified and directed.
All as per item No. 112 above but exc. 1.5 m deep but not exc. 3.00 m depth
All as per item No. 112 above but exc. 3 m deep but not exc. 4.50 m depth
M&L for honey comb brick work with one brick thick fly ash bricks, old size, class designation 75, straight or curved on plan to any radius and built in cement mortar 1:6 complete all as specified and directed.
Use and waste Formwork to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all exceeding 20cm wide for rough finished surface complete all as specified and as directed.
Use and waste of formwork to soffits of suspended slab such as roof slabs, floor slabs, landing and similar work not exceeding 200mm thick (horizontal or sloping) for rough finished surfaces complete all as specified and directed.
M&L RCC M-25 using 20mm graded stone aggregate as in slab supported on wall, beams and coloumns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and similar works complete all as specified and directed.
M&L cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and directed.
M&L for loose filling broken brick bats aggregate for loose filling, of gauge 80 mm to 150 mm graded complete all as specified and directed.
M&L for cement concrete 1:3:6 type C-1 (using 20 mm graded stone aggregate) as in surface channels and drains including formwork complete all as specified and directed.
S&F in repair PVC (SWR) pipe 75 mm bore of pressure rating 10 Kgf/Sqcm, single socketed, in any length with rubber ring joints and fixed to walls with clamps complete all as specified and directed.
S&F PVC(SWR) bends 75 mm bore any radius of pressure rating 10 Kgf/Sqcm complete all as specified and directed.
S&F PVC (SWR) vent cowl 75 mm bore complete all as specified and directed.
S&F in repair PVC (SWR) pipe 110 mm bore of pressure rating 10 Kgf/Sqcm, single socketed, in any length with rubber ring joints and jointed with approved adhesive laid in trenches or in floors complete all as specified and directed.
S&F PVC (SWR) gully trap, 125/110mm, setting and jointing with solvent cement, complete all as specified and directed.
S&F 1mm thick stainless steel plain sheet of grade 304, in wall cladding and similar works cut to size holes punched including round headed screws, clout nails or rivets including steel frame work made of MS frame work made with 25 mm x 25 mm x 1.5 mm thick (minimum) square hollow pipe spacing not exceeding 900 mm C/C both ways with 40 mm lap joint with screws, riveted or welded seams including bending or turning up, mitred with 25 mm x 25 mm SS angle/Cleat complete all as specified and directed.
Supply, Installation and Commissioning of SS Exhaust hood of size 1800 x 900 x 600 MM with SS Baffle filter in 18 SWG thick stainless steel of grade 304 complete all as shown in drawing No. DSC/06 Note: All fittings and fixtures as per mentioned dwg are included in item.
Supply, Installation and Commissioning GI Exhaust air ducting 24 SWG thickness of sheet bend into required shape, all parts hinged together with rubber gaskets zinc coated nut bolts to remove air gaps complete all as directed and specified.
S&F 550 mm diameter Axial Fan (Exhaust blower machine) with minimum air flow capacity of 5000 CFM attached with 2 HP motor with minimum 1440 RPM of approved make including fixing at site complete all as specified and directed.
S&F GI fresh air ducting 24 SWG thickness of sheet bend into required shape, all parts hinged together with rubber gaskets and zinc coated nut bolts to remove air gaps with Aluminium grill openings of reqd size & shape at different locations as required, complete all as directed and specified.
Supply, Installation and Commissioning 600 mm diameter Axial Fan (Fresh air unit) with minimum air flow capacity of 4000 CFM attached with 2 HP motor with minimum 1440 RPM of approved make, Mild steel body of fresh air unit to be painted with anti rust/anti-corrosive paint and installed with honey pads on all 4 sides., including fixing at site complete all as specified and directed.
S&F stainless steel of grade 304, three sink pot wash unit with side bracing of size 1950 x 900 x 850 + 250H mm and sink size 600 x 750 x 400 mm complete all as shown in drawing No. DSC/01 Note: All fittings and fixtures as per mentioned dwg are included in item.
S&F stainless steel of grade 304, work table with sink and space of size 1500 x 700 x 850 + 150H mm and sink size 450 x 450 x 300 mm complete all as shown in drawing No. DSC/02 Note: All fittings and fixtures as per mentioned dwg are included in item.
S&F stainless steel of grade 304, work table with under shelf and middle shelf of size 1800 x 750 x 850 + 150H mm complete all as shown in drawing No. DSC/03
S&F stainless steel of grade 304, two burner Indian range with under shelf of size 1500 x 750 x 800 + 150H mm complete all as shown in drawing No. DSC/04
S&F stainless steel of grade 304, 4 tier SS slotted rack of size 900 x 450 x 1800H mm of 4 shelves complete all as shown in drawing No. DSC/05
S&F 18 SWG thick Plain Stainless steel sheet of grade 304, fixed as Grease trap having size (1.80 x 1.20 x 0.90) mtr incl (1.05 x 0.40 x 0.30) mtr sheet with moveable arrangement as in required shape and the edges shall be moulded including fillets complete all as shown in drawing No. DSC/07
S&F stainless steel of grade 304, drain trough grating of size 900 x 300 x 70 mm complete all as shown in drawing No. DSC/08 Note: All fittings and fixtures as per mentioned dwg are included in item.
S&F for hollow PVC Wall Lining consisting of 6 mm thick single side wood grain printed PVC sheet including wood grain printed PVC sheet fillet of required size with fixing at site on wall complete all as specified and directed.
Taking down copper/ aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors etc. to match the existing complete all as specified and directed. NOTE: Credit for this items shall be made as per conditions separately.
M&L for point wiring complete for one light/fan/ exhaust fan point controlled by one, one way 5 Amp switch with PVC (FRLS) insulated unsheathed multistranded copper conductor of size 1.50 sqmm nominal cross sectional area single core drawn in and including 20mm dia 'medium grade' PVC concealed conduits ISI marked and fittings, including pressed steel concealed terminal switch boxes not less than 1.6mm thick of reqd size factory made duly painted inside and outside with one coat red oxide primer, 3mm thick plastic laminated bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers complete including 1.50 sqmm nominal cross sectional area PVC(FRLS) insulated unsheathed multistranded copper conductor green as earth wire connected to earth dolly with all accessories complete all as specified and directed.
All as per item No. 142 above but for one 5 pin 5 Amp socket outlet point on an independent board.
All as per item No. 142 above but for one 5 pin 5 Amp socket outlet point on the same board with other switch.
All as per Item No 142 above but for one 6 pin 15/16 amps socket outlet point on an independent board with cables of size 2.50 Sqmm and green colour earth cable of size 2.50 Sqmm.
M&L for point wiring complete with PVC (FRLS) insulated unsheathed multistranded copper conductor of size 4 sqmm nominal cross sectional area single core drawn in and including not less than 25 mm dia 'medium grade' PVC concealed conduits ISI marked and fittings, complete including 4 sqmm nominal cross sectional area PVC(FRLS) insulated unsheathed multistranded copper conductor green as earth wire connected to earth dolly with all accessories complete all as specified and directed.
S&F Switch piano, flush type, single pole, one way 5/6 Amp 230 Volts complete all as specified and directed.
S&F socket outlet, flush type, single pole, multipurpose 2 in 1, 5 pin 5/6 Amp, 230 volts complete all as specified and directed.
S&F Switch piano, flush type, single pole, one way 15/16 Amp 230 Volts complete all as specified and directed.
S&F socket outlet, flush type, single pole, multipurpose 2 in 1, 6 pin 15/16 Amp, 230 volts complete all as specified and directed.
S&F Lamp holder PVC/ Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.
S&F ceiling rose, 3 terminal, PVC/ Polycarbonate, insulated body, surface bakelite sheet 63.50mm dia complete all as specified and directed.
S&F ceiling fan regulator, electronic, socket type, 5 speed 230 volts suitable for 1200/1400 mm sweep ceiling fan including necessary connection complete all as specified and directed.
S&F of air ventilating fan metallic body single phase 230/240 volt of size 300 mm sweep 900 rpm including making holes of suitable size in wall grouting of nuts and bolt etc and making good to match the existing surface including louvers and making connection with with 3 core flexible copper wire complete all as directed.
S&F in replacement tube light fitting energy saving decorative LED box type 20 watt (4 Feet), 230 volts, 6500 K energy efficient tube light fitting extruded aluminium/ CRCA housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver complete with all accessories prewired and including making connections with 3 core twisted flexible copper cable of size 23/.0076 from ceilling rose/PVC connector to light fittings complete all as spd and directed. Make-Philips BN 021C LED 20S PSU CW GR S2/WIPRO LL20-111-XXX-65ALI/ Crompton CCS-100-20-65-HL2-DP-NWH
S&F in replacement tube light fitting with energy saving decorative batten type 9/10 watt energy efficient tube light fitting (2 Feet) highly durable surface mounted LED batten constructed of fire retardent engineering grade extruded plastic and decorative end caps with all accessories prewired and making connection with 3 core copper flexible cable of size 23/.0076 from ceilling rose/PVC connector to light fittings. Make:-Philips BN 021 LED10S 6500 PSU GR S1/WIPRO LL20-111-XXX-65NE3/ Crompton CCS-103-10-65-SL-DP-NWH.
S&F LED smart lamp 9 watt, 6500 K, 230 volts complete all as specified and directed. Make : Havells/Philips/Crompton
S&F in replacement of bldg secuirty light fitting energy saving high efficiency LED street light fitting 20/25 Watts, 5700 K, IP 66, having pressure die cast housing with toughened glass and individual high power LEDs with secondary optics, prismatic polycarbonate cover complete including GI bracket of size 32 mm dia bent to shape having length on less than 1.2 mtr fixing with clamp etc and making connections using cord flexible 3 core copper cable of size 23/.0076 from ceilling rose/ PVC connector to light fittings or as directed. Make:-Philips BRP022 LED 20 CW MR S1 PSU GR / Crompton LSTS 20-CDL-M/ Wipro LR02-291-XXX-57-XX.
S&F in replacement sheet metal enclosure MCB distribution board, double door with IP-43 protection single phase 240 volts, 8 way, including suitable size copper bus bar and neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces complete all as specified and directed.
S&F in replacement MCB single pole 240 volts, 'C' curve of rating from 6 to 32 amps, with rupturing capacity 10 KA, including providing thimble for out going cables complete all as specified and directed.
S&F in replacement MCB SPN 240 volts, 'C' curve of rating from 6 to 32 amps, with rupturing capacity 10 KA, including providing thimble for out going cables complete all as specified and directed.
S&F in replacement sub main wiring with two single core PVC insulated (FRLS) unsheathed multistranded copper conductor of size 6 sqmm nominal cross sectional area and one run of 6 sqmm nominal cross sectional area PVC insulated (FRLS) unsheathed multistranded copper conductor green colour as continuous earth wire drawn in and including not less than 25 mm dia 'medium grade' PVC concealed conduits (ISI marked) and fittings complete all as specified and directed. NOTE:- One unit length shall measured as two run of main wire and one run of conduit & earth wire.
M&L for removal of existing old unsv earthing complete and providing new earthing with galvanised steel earth plate electrode, 600 x600 x 6mm thick burried directly in the ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below ground level connected to galvanised iron wire 4mm dia as earth lead by means of bolts, nuts and washers of GI up to test point, GI tubing 15 mm bore medium grade protection pipe, GI watering pipe 20 mm bore light grade with funnel and wire mesh, charcoal, salt complete all as per SSR with PCC chamber, 50mm thick RCC cover in 1:2:4 type B-1 using 20 mm graded stone aggregate reinforced with 8mm dia TMT bar @ 80mm c/c both way including earth work in any type of soil , removal of surplus soil to a distance n.exc 50 m and connecting, testing on completion all as shown on electric plate No 03 of SSR -2009 Part I complete all as specified and directed.(Note: Excavation and earth work is deemed to be included in the rates quoted).
S&F in replacement sheet metal enclosures, single pole with socket plug top and MCBs with a two pin and earth plug and socket complete with one single pole MCB 20 Amps complete all as specified and directed.
M/S RADHEY GOVIND ENTERPRISES
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .