PROVN OF DINING HALL FOR 151 INF BN TA AND PAVER BLOCK AT RIGHT SIDE OF BLDG P 06 AT MUZAFFARPUR UNDER GE DANAPUR CANTT

Amount

Surface excavation n. exc 30cm deep & averaging 15cm deep and getting out in soft/loose soil complete all as specified & directed.

Boring holes 5m deep and 300 mm dia of pile in soil for Single under reamed piles and getting out and disposal of soil to a distance of n.exc 50 m complete all as specified and directed.

Excavation in trenches not exc. 1.50 m wide and not exc. 1.50 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exc. 10 Sqm on plan and getting out in soft / loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in each layer as in soil complete all as specified and directed.

Removing surplus excavated material (SOIL) to distance not exc. 250 m and depositing where directed at a level not exc. 1.50 m above the starting point complete all as specified and directed.

M & L for sand filling under floors or in foundations including watering and consolidation as required complete all as specified and directed.

M & L for Hardcore of broken stone or boulder gauge not exc. 63 mm, deposited, spread and leveled in layers not exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M & L for plain cement concrete, 1:4:8 type D-2 Nominal Mix (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete or sub base of floors complete all as specified and directed.

M&L for providing reinforced cement concrete M-25 Design Mix using 20mm graded stone aggregate as in foundation, footing, foundation beams, plinth beams, bases for columns, pedestal under reamed piles, mass concrete etc complete all as specified and directed

M & L for providing reinforced cement concrete M-25 Design Mix using 20 mm graded stone aggregate as in columns, pillars, piers, posts and struts complete all as specified and directed. (Note :- Reinforcement shall be measured and paid separately under respective item)

M&L for providing reinforced cement concrete M-25 Design Mix using 20mm graded aggregate as in beams, cantilevers, bressmummers, lintels over 1.5 m span complete all as directed

M & L for providing reinforced cement concrete M-25 Design Mix using 20 mm graded stone aggregate as in Chajjas and like complete all as specified and directed. (Note :- Reinforcement shall be measured and paid separately under respective item)

M & L for providing reinforced cement concrete M-25 Design Mix using 20 mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and like complete all as specified and directed. (Note :- Reinforcement shall be measured and paid separately under respective item)

M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

All as per item No 14.00 but 6mm to 8mm dia complete all as specified and directed.

Ditto all as per item No 14.00 above but 5 mm dia and over upto and including 10 mm dia as in stirrups, spacers and binders complete all as specified and directed.

M & L for use and waste of formwork to sides of rough finished suraface of concrete foundation, footing, bases of columns, raft & raft beams, sides and soffits (if any) of foundation and plinth beams; and similar works; in rough finished flat surface of concrete complete all as specified and directed.

M & L for use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar works not exc. 200 mm thick horizontal or slopping in rough finished flat surface of concrete complete all as specified and directed.

M & L for use and waste of formwork to chullah hoods, chajjas, troughs and similar items including edges in rough finished flat surface of concrete complete all as specified and directed.

M&l for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc complete all as spd and as directed.

M & L formwork to sides of pillars, posts, struts, piers, columns and stanchions in rough finished, square, rectangular or polygonal surface of concrete complete all as specified and directed.

M & L for use and waste of formwork to edges of concrete flats, treads, breaks in floor, window cills, concrete railing, opening in concrete wall, sides of RCC slab, RCC / PCC bends in walls or similar work thickness exc. 10 cm and not exc. 20 cm in rough finished surfaces of concrete complete all as specified and directed.

M & L for old size brick work with sub class ‘B’ bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed.

M&L Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM (1:4) in half bricks wall complete all as specified and directed

M & L for 10 mm thick rendering in cement mortar 1:3 on fair faces of brick work or concrete surfaces and finishing the surface even smooth without using extra cement complete all as specified and directed.

M & L for 15 mm thick rendering in cement mortar 1:6 on fair faces of brick work or concrete surfaces and finished the surface even and smooth without using extra cement complete all as specified and directed.

Extra over rendering or plastering for work in isolated width or in widths not forming part of general plastering such as in bands , sunk panels , cornices , skirtings ,drip moulds and similar works exe 15 cm but n. exc 30cm in width or girth including cutting to edges all miters and stopped ends etc.

M & L for rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surfaces, second layer (finishing coat) mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement as per manufacturer's instructions and finished the surfaces even and smooth without using extra cement complete all as specified and directed. Note:- Liquid WPC will be measured and paid separately.

Supply only water proofing compound (liquid), ISI marked.

M & L for preparation of newly plastered or un-plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M & L for preparation of newly plastered or previously untreated surfaces of walls and applying two coats of Oil emulsion distemper over a coat primercomplete all as specified and directed.

M & L Preparing new plastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M&L for 100mm thick Cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggregate) 100mm thick as in sub base finished even & fair etc complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C2 (using 40mm graded stone aggregate), as in sub base of floor finished even and fair Complete all as spesified and directed

M & L machine cut kota stone slab flooring 20 - 25 mm thick over and incl 15 mmm screed bed in CM1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. Note: (size of the stone slab not less than 23"x23")

M&L for Machine cut Kota stone slab flooring 20-25mm thick dado , Skirting, riser and laid over 10mm thich rendering in CM 1:4 and jointed with gray cement slurry mixed with pigment to match the shade of the slab incl rubbing and polishing complete .

S&F Aluminium anodised door shutter side hung in single or double leaf withframe size 83x 44x 1.5mm thick including 5mm thick tintage glass in half portion & 9mm thick prelaminated particle board exterior grade , one side with decorative choice & other sibalcinwhite lamination standard rubber gasket powder casted aluminium beading type handles two nos. for each shutter & one mortice lock & joining cleats etc complete all diorected.

S & F powder coated aluminium window sliding shutter three track with following specification:- (a) chowkhat frame of size 92 x 31.75 x2 mm thick weight @ 1.490Kg/RM (b) Style/Vertical member of size 40 x 27.2 x 2 mm thick weight @ 0.798Kg/RM (c) Top and bottom rail of size size 40 x 27.2 x 2 mm thick weight @ 0.798Kg/RM (d) Partialy 0.63 mm dia stainless steel wire netting mosquito proof with fixing arrangment. (e) Partialy 5.00 mm thick tinted glass fixing with rubber gasket. (f) Aluminum and PVC beading as per requirment as in fixing for paticle board & Glass, joing cleat including locking arrangement. etc

M & L double action floor spring for aluminiumdoors hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheei foundation box , main body with stainless steel cover, govering pivot made of brass , other parts made of mild steel heavy duty and fixed including necessary cutting &making good to floore as per existing complete all as specified and directed. Makke - Kelwyn/Amar

M & L for water proofing treatment on non approachable / non accessible roof surface horizontal and vertical surfaces in following sequence through manufacturer / authorized applicator of the manufacturer complete all as specified and directed :- (i) Properly cleaning and drying concrete surfaces. (ii) Applying a coat of oxidized bitumen based solvent primer @ 0.3 Kg / sqm. (iii) Applying evenly tack coat of industrial bitumen 85 / 25 grade @ 1.2 Kg / sqm. (iv) Laying unrolled over the bitumen coated surfaces polymeric water proofing membrane, hyperplas standard weight not less than 3 Kg / sqm with 100 mm over laps shall be sealed by flame as per manufacturer instruction. (v) Applying a coat of bituminous aluminium paint @ 100 gm / sqm over and including a coat of hot air blown grade bitumen of grade 85 / 25 @ 1.2 Kg / sqm duly sanded over polymeric membrane complete. Note:- The polymeric water proofing membrane shall be extended upto parapet walls and inserted in walls by cutting groove and making good with CM 1:3 complete all as specified and directed.

S&F vitreous china wash basin white, flat back size 630 x 450 mm incl bracket and cutting for and pinning in ends of brackets excluding tap wast complete all as spd.

S&F for pillar tap 15 mm bore cast copper alloy fancy type chromium plated, screwed down, high pressure, with capstan head, with or without lettered "HOT" or "COLD" with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

S&F for bib tap 15 mm bore cast copper alloy fancy type chromium plated with capstan head screwed down screwed for iron pipe or for brass ferrule fixed to iron pipe etc. complete all as specified and directed.

S&F for 15 mm bore concealed type stop cocks, cast copper alloy,CP screwed down, high pressure, with capstan head, fancy type, chromium plated, with long shank and cup, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F 15 mm dia PVC connection 450mm long with two PTMT nuts complete all as specified and directed.

S&F for brass chromium plated tubular towel rail 20 mm dia "D" type 60 cm long between flange complete all as specified and directed.

S & F 15 mm bore galvanised steel water tubing medium grade with and including all fittings and fixed to walls and ceilings or laid under floors complete all as specified and directed.

S & F 20 mm bore galvanised steel water tubing medium grade with and including all fittings and fixed to walls and ceilings or laid under floors complete all as specified and directed.

Drilling and tapping for 20 mm bore in Cast iron water mains (in position) for branch connections complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tanks three layered (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I of 1000 Ltr capacitycomplete all as specified and directed.

S&F for PVC ball valves high pressure of brass with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed of 20 mmdia (min weight-210 gms) complete all as specified and directed

S & F for 15 mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

S & F for 20 mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

M&L for Antitermite treatment of soil under existing floors using emulsion @ one litre per hole ,300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement : 2 coarse sand )to match the existing floors complete all as specified and directed.

M&L for two coat of pidifin 2k on surfaces all specified and directed.

S&F for mild steel conduit curtain rod with PVC coating fancy type curten rod 20 mm dia of any colour as approved complete.

S&F mild steel Bracket with PVC coating fancy type for curten rod 20 mm dia of any colour as approved complete.

S&F for MS Peg set of six powder coated as approved by GE

M & L for Glazed ceramic coloured tiles of size 350 mm X 250 mm X 7 mm thick or 450mm X 350mm X 7 mm thick as on vertical surfaces such as skirting, dados and rises to steps etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile including 10 mmthick rendering in CM1:4complete all as specified and directed.

M & L for 60 mm thick Machine pressed precast concrete interlocking paver block with grey cement and no pigment any shape and size confirming to IS 15658-2006, M-35 grade as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile complete all as specified and directed.

M&L for hardcore of brken bricks gauge exc. 63 mm but not exc. 100mm, deposited, spread and leveled in layers not exc. 15 cm thick, watered and rammed to a true surface using broken bricks complete all as specified and directed.

M&L preparing of old plastered or un plastered surface of walls and applying two coats of cement base paint complete all as specified and directed.

M&L for PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in coping including necessary form work

M & L for Point wiring with PVC insulated and PVC unsheathed electric FRLS cable of 1100V single core having multi stranded copper conductor of size 1.5 Sqmm nominal cross sectional area & including non metallic rigid PVC conduit ISI marked medium grade not less than 20 mm dia with all conduit accessories in concealed wiring system by cutting of wall and making good disturbed surface of wall (cutting except on ceiling for fan point only, on ceiling instead of PVC conduit on surface will be used) & 1.5 sqmm green PVC insulated unsheathed copper conductor as a earth wire connected to earth dolly by providing lugs including 1.6mm thick anodised pressed steel sunken box covered with 3mm thick hylum sheet for mounting switches, sockets, fan regulators etc for the following complete all as specified and directed. Make of Cable : Polycab/Havell's/Finolex and Make of PVC conduit : Plaza/Harsh/Kalinga Premium/AKG:-

One light/fan/ bellpoint controlled by one switch complete all as specified & directed

All as per above item but for 3 pin socket out let for 15 Amp on same board with 2.5 sqmm PVC insulated cable complete all as specified & directed

One 5 Amps socket out let point on independent board controlled by one switch complete all as specified & directed.

One 15 Amps socket out let point on independent board controlled by one switch complete all as specified & directed.

S&F, Switch Piano, flush type, single pole, one way, 5 Amps, 230 Volt grade, ISI marked complete all as specified and directed.

S & F socket outlet flush type multipurpose 2 in 1, 5 pin 5 Amps 230 volts complete all as specified & directed.

Supply and fixing in repair switch socket combination 2 in 1, 5 Amp flush type, 240 Volts complete all as specified and directed.

S&F MCB SP of capacity 5 - 32 Amps 240 volts, 10 KA breaking capacity 'C' series incl connection complete all as specified & directed.

Supply and fixing MCB SPN 50 to 63 amps 10 KA ,C-series including connection with suitable size aluminium / copper lugs complete all as specified and directed.

Supply and fixing factory made sheet metal enclosure 240 volts 8 way with 200Amps rated bus bar complete si

M & L for ceiling rose surface bakelite, 65 x 50 mm surface type two to three terminals AC 240 volts complete

S & F LED fluorescent tube light fitting single tube 1x 36 W 230 volts surface mounted decorative mirror optic type with electric ballast bipin holder connector including tube rod 36 watt block etc complete with all accesssories internally pre wired and incl connecting up with twin core twisted flexible copper conductor cable with suitable size.

Supply, fixing and testing of ceiling fan 1200 mm sweep, heavy duty, single phase, AC, 230 Volts, 50Hz, BEE 5 star rating, ISI marked complete with down rod, canopy, blades, BLDC motor without remote, electronics fan regulator etc complete connection from ceiling rose to fan including writing of MES Number with synthetic enamel paint complete all as specified and as directed.

Supply & fixing for electronic Fan regulator 450 watt step type complete all as specified and directed.

S&F lamp holder insulated body with back plate for batten/ angular fitting complete all as specified & directed.

S&F LED lamp 9 watt complete all as specified and directed.

S&F for 100 volt grade heavy duty PVC insulated aluminium served with inner sheathed of PVC tape and over all PVC sheathed in service connection suspended by insulating hamgers not more than 1 mtr apprat incl 4 mm suspension wire 10 Sqmm

S & F Sub main wiring with two run single core multistandred copper conductor cable of size 4 sqmm drawn through in and incl rigid PVC conduit and conduit accessories dia not less than 20 mm with 1 sqmm PVC insulated unsheathed single core soild copper conductor 1100 volts as earth contunity complete all as specified & directed Note:Out of two runs of cable one run of earth wire and one run of PVC conductor shall be measured as one unit

Earthing complete with galvanised steel earth plate electrode 600mm X 600 mm X6.30mm thick burried directly in ground (earth plate not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to and including GI earth lead of Gi wire 4 mm size by means of steel bolts,nuts, check nuts and washers, PCC 1:2:4 type B-1 in pit, angle iron 25X25X3mm frame work with precast RCC 1:2:4 type B-1 cover reinforced with 8mm dia TMT bars @ 150mm C/C both ways abd 12mm dia MS fabricated handle, medium grade GI watering pipe 20mm bore with funnel, wire mess and light grade GI protection pipe 20mm bore upto 7.5m length for drawing in earth lead ,salt,charcol etc. including excavation and earth work in any type of soil , removal of surplus soil to a distance not exceeding 50m complete all as shown in electrical plate No. 3 of MES schedule 2009 part-I and connected complete all as specified including testing on completion

Supply and lay pipe galvanized, “Medium class”, including fittings 25 mm (1”) dia complete all as specified and as directed.

Supply and fixCast copper alloy Valve, stop, screwed dia 25 mm (1.0”) dia pipe complete all as specified and as directed.

Supply and lay cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor for 25 sqmm 2 core complete all specified and directed.

M/S Priya Trading Agency

M/S PRAVIN ENTERPRISES

RAJ AND SONS

M/S SAROJ KUMAR SINGH

M/s Mukesh and company

M/S ANAND MOHAN ENTERPRISES

ANAHITAS INFOSOLUTIONS PRIVATE LIMITED